Diagrammatic scale for the assessment of blast on wheat spikes

The correct quantification of blast caused by the fungus Magnaporthe oryzae on wheat (Triticum aestivum) spikes is an important component to understand the development of this disease aimed at its control. Visual quantification based on a diagrammatic scale can be a practical and efficient strategy that has already proven to be useful against several plant pathosystems, including diseases affecting wheat spikes like glume blotch and fusarium head blight. Spikes showing different disease severity values were collected from a wheat field with the aim of elaborating a diagrammatic scale to quantify blast severity on wheat spikes. The spikes were photographed and blast severity was determined by using resources of the software ImageJ. A diagrammatic scale was developed with the following disease severity values: 3.7, 7.5, 21.4, 30.5, 43.8, 57.3, 68.1, 86.0, and 100.0%. An asymptomatic spike was added to the scale. Scale validation was performed by eight people who estimated blast severity by using digitalized images of 40 wheat spikes. The precision and the accuracy of the evaluations varied according to the rater (0.82

Uudelleenkäytettävyys eräässä ohjelmistoprojektissa

Tässä työssä kuvataan erästä kaupallista ohjelmistoprojektia, jossa ohjelmistojen uudelleenkäyttöä tavoiteltiin komponenttipohjaisen uudelleenkäytön ja ohjelmistojen sovittamisen kautta. Projektissa toteutettiin matkapuhelinsovellus, jonka ydin eristettiin uudelleenkäytettäväksi ja sovitettavaksi komponentiksi. Ytimen sovitettavuus verifioitiin sovittamalla ydin toiselle ympäristölle ja edelleen toteuttamalla toimiva prototyyppisovellus sovitetun ytimen varaan. Ytimen sovittamisen sekä prototyyppisovelluksen toteuttamisen vaatima työmäärä oli huomattavasti pienempi kuin ytimen tekemiseen alkuperin käytetty työmäärä. Työssä on osoitettu ohjelmistometriikoiden avulla, että merkittävä osa ohjelmiston toiminnallisuudesta saatiin uudelleenkäytettäväksi sovitettavan ytimen avulla. Lisäksi työssä on kuvattu millaisia kehitysprosessikäytäntöjä projektissa oli käytössä tukemassa uudelleenkäytettävyystavoitetta.

Tutorials for MeVEA Simulation Software

The objective of the thesis was to create three tutorials for MeVEA Simulation Software to instruct the new users to the modeling methodology used in the MeVEA Simulation Software. MeVEA Simulation Software is a real-time simulation software based on multibody dynamics. The simulation software is designed to create simulation models of complete mechatronical system. The thesis begins with a more detail description of the MeVEA Simulation Software and its components. The thesis presents the three simulation models and written theory of the steps of model creation. The first tutorial introduces the basic features which are used in most simulation models. The basic features include bodies, constrains, forces, basic hydraulics and motors. The second tutorial introduces the power transmission components, tyres and user input definitions for the different components in power transmission systems. The third tutorial introduces the definitions of two different types of collisions and collision graphics used in MeVEA Simulation Software.

Software interativo: ecocardiografia na avaliaçao da hipertensao arterial

A hipertensao arterial é uma doença muito prevalente, evoluindo com lesoes em órgaos-alvo, alta morbidade e mortalidade. A avaliaçao das repercussoes cardíacas pela ecocardiografia tem papel importante na conduçao clínica dos indivíduos hipertensos, e suas imagens podem ser utilizadas como ferramenta para o ensino. OBJETIVOS: Desenvolver e avaliar um software, construído com base em imagens ecocardiográficas, abordando de forma ilustrativa e interativa a estrutura e funçao cardíacas normais,bem como as alteraçoes induzidas pela hipertensao arterial. MÉTODOS: Foram selecionadas imagens ecocardiográficas de indivíduos normais e com comprometimento cardíaco determinado pela hipertensao (hipertrofia ventricular esquerda, miocardiopatia dilatada e infarto do miocárdio). Com estas imagens foi construído um software no programa multimídia Flash, que foi avaliado por estudantes de Medicina (n=38) e Enfermagem (n=18), também submetidos a pré- e pós-teste. RESULTADOS: Os alunos consideraram o software útil, atraente e adequado as atuais metodologias educacionais proativas,promovendo ganho de conhecimento na compreensao do comprometimento cardíaco na hipertensao arterial. Conclusao: O software foi bem avaliado e considerado útil na aquisiçao de conhecimento numa área específica mais prevalente do comprometimento da saúde do adulto.

Software Educacional: Nematelmintos de Aquisição Passiva

RESUMO Objetivo Desenvolver e avaliar um software educacional com base em imagens parasitológicas de helmintos, abordando de forma ilustrativa e interativa os nematelmintos de transmissão passiva, o que poderá ser útil a professores, profissionais e alunos de graduação das diferentes profissões da saúde na compreensão e identificação dessas verminoses, aproximando-os também da prática profissional. Metodologia O software foi construído com base em um banco de imagens do próprio autor, utilizando o multimídia Flashâ, que permite elaborar animações e simulações em linguagem vetorial, resultando em arquivos pequenos, que podem ser disponibilizados através da web ou em mídias ópticas e magnéticas. A avaliação do produto final foi feita por estudantes de Medicina. Resultados O software foi concluído e bem avaliado pelos estudantes do curso de Medicina (n=97) da Faculdade de Ciências Médicas e da Saúde (FCMS) da PUC/SP. Os pré e pós-testes do material mostraram consistente crescimento do conhecimento, seja por autoavaliação ou por questões objetivas fechadas. Conclusão Os resultados atuais permitem concluir que o software é de grande interesse educacional e poderá ser útil a estudantes, profissionais e docentes da área da saúde.

Methods and Models for Accelerating Dynamic Simulation of Fluid Power Circuits

The objective of this dissertation is to improve the dynamic simulation of fluid power circuits. A fluid power circuit is a typical way to implement power transmission in mobile working machines, e.g. cranes, excavators etc. Dynamic simulation is an essential tool in developing controllability and energy-efficient solutions for mobile machines. Efficient dynamic simulation is the basic requirement for the real-time simulation. In the real-time simulation of fluid power circuits there exist numerical problems due to the software and methods used for modelling and integration. A simulation model of a fluid power circuit is typically created using differential and algebraic equations. Efficient numerical methods are required since differential equations must be solved in real time. Unfortunately, simulation software packages offer only a limited selection of numerical solvers. Numerical problems cause noise to the results, which in many cases leads the simulation run to fail. Mathematically the fluid power circuit models are stiff systems of ordinary differential equations. Numerical solution of the stiff systems can be improved by two alternative approaches. The first is to develop numerical solvers suitable for solving stiff systems. The second is to decrease the model stiffness itself by introducing models and algorithms that either decrease the highest eigenvalues or neglect them by introducing steady-state solutions of the stiff parts of the models. The thesis proposes novel methods using the latter approach. The study aims to develop practical methods usable in dynamic simulation of fluid power circuits using explicit fixed-step integration algorithms. In this thesis, twomechanisms whichmake the systemstiff are studied. These are the pressure drop approaching zero in the turbulent orifice model and the volume approaching zero in the equation of pressure build-up. These are the critical areas to which alternative methods for modelling and numerical simulation are proposed. Generally, in hydraulic power transmission systems the orifice flow is clearly in the turbulent area. The flow becomes laminar as the pressure drop over the orifice approaches zero only in rare situations. These are e.g. when a valve is closed, or an actuator is driven against an end stopper, or external force makes actuator to switch its direction during operation. This means that in terms of accuracy, the description of laminar flow is not necessary. But, unfortunately, when a purely turbulent description of the orifice is used, numerical problems occur when the pressure drop comes close to zero since the first derivative of flow with respect to the pressure drop approaches infinity when the pressure drop approaches zero. Furthermore, the second derivative becomes discontinuous, which causes numerical noise and an infinitely small integration step when a variable step integrator is used. A numerically efficient model for the orifice flow is proposed using a cubic spline function to describe the flow in the laminar and transition areas. Parameters for the cubic spline function are selected such that its first derivative is equal to the first derivative of the pure turbulent orifice flow model in the boundary condition. In the dynamic simulation of fluid power circuits, a tradeoff exists between accuracy and calculation speed. This investigation is made for the two-regime flow orifice model. Especially inside of many types of valves, as well as between them, there exist very small volumes. The integration of pressures in small fluid volumes causes numerical problems in fluid power circuit simulation. Particularly in realtime simulation, these numerical problems are a great weakness. The system stiffness approaches infinity as the fluid volume approaches zero. If fixed step explicit algorithms for solving ordinary differential equations (ODE) are used, the system stability would easily be lost when integrating pressures in small volumes. To solve the problem caused by small fluid volumes, a pseudo-dynamic solver is proposed. Instead of integration of the pressure in a small volume, the pressure is solved as a steady-state pressure created in a separate cascade loop by numerical integration. The hydraulic capacitance V/Be of the parts of the circuit whose pressures are solved by the pseudo-dynamic method should be orders of magnitude smaller than that of those partswhose pressures are integrated. The key advantage of this novel method is that the numerical problems caused by the small volumes are completely avoided. Also, the method is freely applicable regardless of the integration routine applied. The superiority of both above-mentioned methods is that they are suited for use together with the semi-empirical modelling method which necessarily does not require any geometrical data of the valves and actuators to be modelled. In this modelling method, most of the needed component information can be taken from the manufacturer’s nominal graphs. This thesis introduces the methods and shows several numerical examples to demonstrate how the proposed methods improve the dynamic simulation of various hydraulic circuits.

Analysis of companies' software as a service adoption intention factors

The goal of this study is to develop managerial recommendations for international vendors and system integrators, which offer Software as a Service for enterprise information systems on the Russian market. Those recommendations can be used to develop marketing, sales, new product and service level agreement strategies. For those reasons factors affecting SaaS adoption were determined and their influence on intention to adoption was examined.

Intellectual capital management in international and Russian software companies

The importance of the company’s intellectual capital (IC) increased during the last decades due to knowledge-based economy development. Despite the clear understanding of the IC importance, researchers agree on the fact that many difficulties in management of intangibles still exist from the both theoretical and practical points of view. The goal of the study is to conduct a comparison of IC management approaches used in international and Russian software companies. To carry out a proper comparison and identify similarities and differences, software firms are explored from the point of view of IC, and then be compared in the context of international and Russian sectors. At the end of the study, current IC management findings in international and Russian software companies are presented, and comparison of IC management is done. It was investigated from the comparison that international and Russian software companies have similarities and few principal differences in several IC management areas. The comparison of IC management approaches between international and Russian software companies provide helpful information to both, researchers and practitioners.

When to Utilize Software as a Service

Cloud computing enables on-demand network access to shared resources (e.g., computation, networks, servers, storage, applications, and services) that can be rapidly provisioned and released with minimal management effort. Cloud computing refers to both the applications delivered as services over the Internet and the hardware and system software in the data centers. Software as a service (SaaS) is part of cloud computing. It is one of the cloud service models. SaaS is software deployed as a hosted service and accessed over the Internet. In SaaS, the consumer uses the provider‘s applications running in the cloud. SaaS separates the possession and ownership of software from its use. The applications can be accessed from any device through a thin client interface. A typical SaaS application is used with a web browser based on monthly pricing. In this thesis, the characteristics of cloud computing and SaaS are presented. Also, a few implementation platforms for SaaS are discussed. Then, four different SaaS implementation cases and one transformation case are deliberated. The pros and cons of SaaS are studied. This is done based on literature references and analysis of the SaaS implementations and the transformation case. The analysis is done both from the customer‘s and service provider‘s point of view. In addition, the pros and cons of on-premises software are listed. The purpose of this thesis is to find when SaaS should be utilized and when it is better to choose a traditional on-premises software. The qualities of SaaS bring many benefits both for the customer as well as the provider. A customer should utilize SaaS when it provides cost savings, ease, and scalability over on-premises software. SaaS is reasonable when the customer does not need tailoring, but he only needs a simple, general-purpose service, and the application supports customer‘s core business. A provider should utilize SaaS when it offers cost savings, scalability, faster development, and wider customer base over on-premises software. It is wise to choose SaaS when the application is cheap, aimed at mass market, needs frequent updating, needs high performance computing, needs storing large amounts of data, or there is some other direct value from the cloud infrastructure.

Determinação de fatores de empilhamento através do software Digitora

Este trabalho foi realizado com o objetivo de avaliar o uso do programa computacional Digitora na determinação de fatores de empilhamento. Para isto, foram utilizadas pilhas de madeira de eucalipto, empilhadas manualmente sobre o solo. Após as análises, verificou-se que: a) o software propiciou estimativas precisas dos fatores de empilhamento; b) houve uma leve tendência de superestimação dos fatores pelo Digitora; c) o treinamento do operador com relação à classificação dos pontos sobre as fotografias no Digitora é condição primordial para obtenção de estimativas precisas dos fatores de empilhamentos; e d) as fotografias deverão ser sempre tomadas com o flash e o ZOOM ativados.

Software Test Process Development

In this thesis, the components important for testing work and organisational test process are identified and analysed. This work focuses on the testing activities in reallife software organisations, identifying the important test process components, observing testing work in practice, and analysing how the organisational test process could be developed. Software professionals from 14 different software organisations were interviewed to collect data on organisational test process and testing‐related factors. Moreover, additional data on organisational aspects was collected with a survey conducted on 31 organisations. This data was further analysed with the Grounded Theory method to identify the important test process components, and to observe how real‐life test organisations develop their testing activities. The results indicate that the test management at the project level is an important factor; the organisations do have sufficient test resources available, but they are not necessarily applied efficiently. In addition, organisations in general are reactive; they develop their process mainly to correct problems, not to enhance their efficiency or output quality. The results of this study allows organisations to have a better understanding of the test processes, and develop towards better practices and a culture of preventing problems, not reacting to them.

Automated Software Testing in Machine Automation

The problem of software (SW) defaults is becoming more and more topical because of increasing amount of the SW and its complication. The majority of these defaults are founded during the test part that consumes about 40-50% of the development efforts. Test automation allows reducing the cost of this process and increasing testing effectiveness. In the middle of 1980 the first tools for automated testing appeared and the automated process was implemented in different kinds of SW testing. In short time, it became obviously, automated testing can cause many problems such as increasing product cost, decreasing reliability and even project fail. This thesis describes automated testing process, its concept, lists main problems, and gives an algorithm for automated test tools selection. Also this work presents an overview of the main automated test tools for embedded systems.

Integrating user experience into early phases of software development

The value and benefits of user experience (UX) are widely recognized in the modern world and UX is seen as an integral part of many fields. This dissertation integrates UX and understanding end users with the early phases of software development. The concept of UX is still unclear, as witnessed by more than twenty-five definitions and ongoing argument about its different aspects and attributes. This missing consensus forms a problem in creating a link between UX and software development: How to take the UX of end users into account when it is unclear for software developers what UX stands for the end users. Furthermore, currently known methods to estimate, evaluate and analyse UX during software development are biased in favor of the phases where something concrete and tangible already exists. It would be beneficial to further elaborate on UX in the beginning phases of software development. Theoretical knowledge from the fields of UX and software development is presented and linked with surveyed and analysed UX attribute information from end users and UX professionals. Composing the surveys around the identified 21 UX attributes is described and the results are analysed in conjunction with end user demographics. Finally the utilization of the gained results is explained with a proof of concept utility, the Wizard of UX, which demonstrates how UX can be integrated into early phases of software development. The process of designing, prototyping and testing this utility is an integral part of this dissertation. The analyses show statistically significant dependencies between appreciation towards UX attributes and surveyed end user demographics. In addition, tests conducted by software developers and industrial UX designer both indicate the benefits and necessity of the prototyped Wizard of UX utility. According to the conducted tests, this utility meets the requirements set for it: It provides a way for software developers to raise their know-how of UX and a possibility to consider the UX of end users with statistical user profiles during the early phases of software development. This dissertation produces new and relevant information for the UX and software development communities by demonstrating that it is possible to integrate UX as a part of the early phases of software development.

Avaliação hidráulica de um sistema de irrigação localizada de baixa pressão, projetado pelo software "bubbler"

Conduziu-se este trabalho com o objetivo de avaliar o desempenho de um sistema de irrigação a baixa pressão, bubbler, em condições de campo. A avaliação consistiu de um estudo dividido em duas fases, em que, na primeira, foi elaborado o dimensionamento hidráulico do sistema de irrigação, com uso do programa computacional Bubbler versão 1.1, enquanto, na segunda fase, ocorreram a instalação e os testes de campo. Estabeleceram-se as alturas de 0,77; 0,71; 0,68 e 0,67 m na saída das mangueiras emissoras no campo, conforme recomendação do programa. Foram feitas as avaliações de vazão em cada mangueira emissora, para determinar o Coeficiente de Uniformidade de Christiansen (CUC), a Uniformidade de Distribuição (UD) e a Eficiência de Aplicação (EA). Os testes mostraram CUC igual a 96,64%, UD igual a 95,85% e EA igual a 86,98%. O sistema no campo proporcionou vazão média de 64,8 L h-1 contra os 79,2 L h-1 estabelecidos pelo programa. Os valores encontrados de vazão diferiram dos valores projetados pelo aplicativo, em conseqüência da variação dos diâmetros e das perdas de carga (linear e localizada) que apresentaram desvio-padrão de 0,23 m.

Software para o planejamento e a racionalização do uso de sistemas de terraceamento em nível

O desenvolvimento de técnicas que permitam o aumento da eficiência de práticas de conservação do solo é necessário frente aos grandes prejuízos causados pela erosão. Nesse sentido, elaborou-se um software que utiliza bases de dados geradas em um Sistema de Informações Geográficas e que permite o dimensionamento de sistemas de terraceamento em nível de maneira mais racional, considerando as variações espaciais existentes no terreno. Como dados de entrada ao software, devem ser fornecidas imagens de elevação e declividade e, ainda, características de tipo, uso e manejo do solo, a metodologia para o cálculo do espaçamento entre terraços e a recomendação para a escolha do tipo de terraço mais aconselhado. Como resultados, o software fornece uma imagem com o sistema de terraceamento locado, que pode ser salva em diferentes formatos, bem como um relatório, que poderá ser impresso e usado juntamente com a imagem para a implantação do sistema.