Ecotoxicity tests using the green algae chlorella vulgaris — a useful tool in hazardous effluents management

The treatment efficiency of laboratory wastewaters was evaluated and ecotoxicity tests with Chlorella vulgaris were performed on them to assess the safety of their environmental discharge. For chemical oxygen demand wastewaters, chromium (VI), mercury (II) and silver were efficiently removedby chemical treatments.Areduction of ecotoxicitywas achieved; nevertheless, an EC50 (effective concentration that causes a 50% inhibition in the algae growth) of 1.5% (v/v) indicated still high level of ecotoxicity. For chloride determination wastewaters, an efficient reduction of chromium and silver was achieved after treatment. Regarding the reduction of ecotoxicity observed, EC50 increased from 0.059% to 0.5%, only a 0.02% concentration in the aquatic environment would guarantee no effects. Wastewaters containing phenanthroline/iron (II) complex were treated by chemical oxidation. Treatmentwas satisfactory concerning chemical parameters, although an increase in ecotoxicitywas observed (EC50 reduced from 0.31% to 0.21%). The wastes from the kinetic study of persulphate and iodide reaction were treated with sodium bisulphite until colour was removed. Although they did not reveal significant ecotoxicity, only over 1% of the untreated waste produced observable effects over algae. Therefore, ecotoxicity tests could be considered a useful tool not only in laboratory effluents treatment, as shown, but also in hazardous wastewaters management.

Layered smart grid architecture approach and field tests by ZigBee technology

This paper presents a layered Smart Grid architecture enhancing security and reliability, having the ability to act in order to maintain and correct infrastructure components without affecting the client service. The architecture presented is based in the core of well design software engineering, standing upon standards developed over the years. The layered Smart Grid offers a base tool to ease new standards and energy policies implementation. The ZigBee technology implementation test methodology for the Smart Grid is presented, and provides field tests using ZigBee technology to control the new Smart Grid architecture approach. (C) 2014 Elsevier Ltd. All rights reserved.

Role of abrasive material on micro-abrasion wear tests

Micro-abrasion wear tests with ball-cratering configuration are widely used. Sources of variability are already studied by different authors and conditions for testing are parameterized by BS EN 1071-6: 2007 standard which refers silicon carbide as abrasive. However, the use of other abrasives is possible and allowed. In this work, ball-cratering wear tests were performed using four different abrasive particles of three dissimilar materials: diamond, alumina and silicon carbide. Tests were carried out under the same conditions on a steel plate provided with TiB2 hard coating. For each abrasive, five different test durations were used allowing understanding the initial wear phenomena. Composition and shape of abrasive particles were investigated by SEM and EDS. Scar areas were observed by optical and electronic microscopy in order to understand the wear effects caused by each of them. Scar geometry and grooves were analyzed and compared. Wear coefficient was calculated for each situation. It was observed that diamond particles produce well-defined and circular wear scars. Different silicon carbide particles presented dissimilar results as consequence of distinct particle shape and size distribution.

Influence of the abrasive particles size in the micro-abrasion wear tests of TiAlSiN thin coatings

Ball rotating micro-abrasion tribometers are commonly used to carry out wear tests on thin hard coatings. In these tests, different kinds of abrasives were used, as alumina (Al2O3), silicon carbide (SiC) or diamond. In each kind of abrasive, several particle sizes can be used. Some studies were developed in order to evaluate the influence of the abrasive particle shape in the micro-abrasion process. Nevertheless, the particle size was not well correlated with the material removed amount and wear mechanisms. In this work, slurry of SiC abrasive in distilled water was used, with three different particles size. Initial surface topography was accessed by atomic force microscopy (AFM). Coating hardness measurements were performed with a micro-hardness tester. In order to evaluate the wear behaviour, a TiAlSiN thin hard film was used. The micro-abrasion tests were carried out with some different durations. The abrasive effect of the SiC particles was observed by scanning electron microscopy (SEM) both in the films (hard material) as in the substrate (soft material), after coating perforation. Wear grooves and removed material rate were compared and discussed.

Psychological impact of diagnostic exams

Introduction: Anxiety is a common problem in primary care and specialty medical settings. Treating an anxious patient takes more time and adds stress to staff. Unrecognized anxiety may lead to exam repetition, and impedance of exam performance. Objective: The aim of the study was to examine the anxiety levels of patients who are to undergo diagnostic exams related to cancer diagnostic: PET/CT and mammography. Methods: Two hundred and thirty two patients who undergo PET/CT and one hundred thirteen women who undergo mammography filled out one questionnaire after the procedure to determine their concerns, expectations and perceptions of anxiety. Results: Our results show that the main causes of anxiety in patients who are having a PET/CT is the fear of the procedure itself and fear of the results. Patients who suffered from greater anxiety were those who were scanned during the initial stage of an oncological disease. On the other hand, the diagnostic is the main cause of anxiety in women who are requiring a mammography. 28% of the women reported having experienced pain or intense pain. Conclusions: The performance of diagnostic exams related to cancer diagnostic like a PET/CT and a mammography are important and statistically generators of anxiety. Patients are often poorly informed and present with a range of anxieties that may ultimately affect examination quality. These results provide expertise that can be used in the development of future training programs to integrate post-graduate courses of health professionals.

Semi-destructive in situ tests as support to the assessment of a conservation process

This paper refers to the assessment on site by semi-destructive testing (SDT) methods of the consolidation efficiency of a conservation process developed by Henriques (2011) for structural and non-structural pine wood elements in service. This study was applied on scots pine wood (Pinus sylvestris L.) degraded by fungi after treatment with a biocidal product followed by consolidation with a polymeric product. This solution avoids substitutions of wood moderately degraded by fungi, improving its physical and mechanical characteristics. The consolidation efficiency was assessed on site by methods of drill resistance and penetration resistance. The SDT methods used showed good sensitivity to the conservation process and could evaluate their effectiveness. (C) 2015 Elsevier Ltd. All rights reserved.

Efficient schedulability tests for real-time embedded systems with urgent routines

Task scheduling is one of the key mechanisms to ensure timeliness in embedded real-time systems. Such systems have often the need to execute not only application tasks but also some urgent routines (e.g. error-detection actions, consistency checkers, interrupt handlers) with minimum latency. Although fixed-priority schedulers such as Rate-Monotonic (RM) are in line with this need, they usually make a low processor utilization available to the system. Moreover, this availability usually decreases with the number of considered tasks. If dynamic-priority schedulers such as Earliest Deadline First (EDF) are applied instead, high system utilization can be guaranteed but the minimum latency for executing urgent routines may not be ensured. In this paper we describe a scheduling model according to which urgent routines are executed at the highest priority level and all other system tasks are scheduled by EDF. We show that the guaranteed processor utilization for the assumed scheduling model is at least as high as the one provided by RM for two tasks, namely 2(2√−1). Seven polynomial time tests for checking the system timeliness are derived and proved correct. The proposed tests are compared against each other and to an exact but exponential running time test.

Syngas production by water electrolysis: preliminary tests on methane production

Master Thesis to obtain the Master degree in Chemical Engineering - Branch Chemical Processes

Do the psychological impacts of war cause poverty?: Evidence from Mozambique

This paper evaluates the extent to which war-related psychological distress causes poverty. The endogeneous nature of mental distress is addressed by using exposure to the civil war in Mozambique as an instrument. It is found that exposure to war has a significant and positive long-lasting impact on mental distress. Furthermore, the causal impact of war-related psychological distress on income and wealth is shown to be significant, negative, and nonnegligible. One standard deviation increase in mental distress decreases income by half a standard deviation. These findings are robust to alternative specifications, including the use of an alternative database on the incidence of PTSD in Mozambique.

Psychological safety, authentic leadership and social networks : A psycho-structural approach to the study of groups

Tese de Doutoramento em Psicologia na área de especialização de Psicologia das Organizações apresentada ao ISPA - Instituto Universitário

Can a targeted psychological intervention be effective for young people following a first manic episode? Results from an 18-month pilot study.

Aim: There is a scarce literature describing psychological interventions for a young, first-episode cohort who have experienced psychotic mania. This study aimed to assess whether a manualized psychological intervention could be effective in reducing symptomatology and relapse, and improve functional outcome in this population. Methods: The study was an open-label design, drawn from a larger pharmacotherapy trial. All participants in the pharmacotherapy trial were offered a manualized psychological intervention in addition to case management. Inclusion in the psychotherapy group was based on participant's choice, and on completion of four or more of the eight modules offered. All clinical files were audited to ensure accuracy of group allocation. Forty young people aged 15 to 25 years old who had experienced a manic episode with psychotic features were recruited into the study, with 20 people in the combined treatment as usual plus psychotherapy group (P+TAU), and an equal number of matched control participants who received treatment as usual (TAU) within the same service. All participants were prescribed antipsychotic and mood-stabilizing medication. Symptomatic, functional and relapse measures were taken both at baseline and at 18-month follow-up. Results: Manic symptoms improved significantly for both groups, with no differences between groups. Depression scores and overall symptom severity were significantly lower in the P + TAU group. No differences were evident between groups with regard to numbers or type of relapse. The P + TAU group had significantly better social and occupational functioning after 18 months. Conclusion: This study suggests that a manualized psychological intervention targeted to a first-episode population can be effective in reducing depression and overall symptom severity, and can improve functional outcome following a first episode of psychotic mania.

Routine use of point-of-care tests: usefulness and application in clinical microbiology.

Point-of-care (POC) tests offer potentially substantial benefits for the management of infectious diseases, mainly by shortening the time to result and by making the test available at the bedside or at remote care centres. Commercial POC tests are already widely available for the diagnosis of bacterial and viral infections and for parasitic diseases, including malaria. Infectious diseases specialists and clinical microbiologists should be aware of the indications and limitations of each rapid test, so that they can use them appropriately and correctly interpret their results. The clinical applications and performance of the most relevant and commonly used POC tests are reviewed. Some of these tests exhibit insufficient sensitivity, and should therefore be coupled to confirmatory tests when the results are negative (e.g. Streptococcus pyogenes rapid antigen detection test), whereas the results of others need to be confirmed when positive (e.g. malaria). New molecular-based tests exhibit better sensitivity and specificity than former immunochromatographic assays (e.g. Streptococcus agalactiae detection). In the coming years, further evolution of POC tests may lead to new diagnostic approaches, such as panel testing, targeting not just a single pathogen, but all possible agents suspected in a specific clinical setting. To reach this goal, the development of serology-based and/or molecular-based microarrays/multiplexed tests will be needed. The availability of modern technology and new microfluidic devices will provide clinical microbiologists with the opportunity to be back at the bedside, proposing a large variety of POC tests that will allow quicker diagnosis and improved patient care.

Risk factors for positive tuberculin skin tests among migrant and resident children in Lausanne, Switzerland.

SETTING: Ambulatory paediatric clinic in Lausanne, Switzerland, a country with a significant proportion of tuberculosis (TB) among immigrants. AIM: To assess the factors associated with positive tuberculin skin tests (TST) among children examined during a health check-up or during TB contact tracing, notably the influence of BCG vaccination (Bacille Calmette Guérin) and history of TB contact. METHOD: A descriptive study of children who had a TST (2 Units RT23) between November 2002 and April 2004. Age, sex, history of TB contact, BCG vaccination status, country of origin and birth outside Switzerland were recorded. RESULTS: Of 234 children, 176 (75%) had a reaction equal to zero and 31 (13%) tested positive (>10 mm). In a linear regression model, the size of the TST varied significantly according to the history of TB contact, age, TB incidence in the country of origin and BCG vaccination status but not according to sex or birth in or outside Switzerland. In a logistic regression model including all the recorded variables, age (Odds Ratio = 1.21, 95% CI 1.08; 1.35), a history of TB contact (OR = 7.31, 95% CI 2.23; 24) and the incidence of TB in the country of origin (OR = 1.01, 95% CI 1.00; 1.02) were significantly associated with a positive TST but sex (OR = 1.18, 95% CI 0.50; 2.78) and BCG vaccination status (OR = 2.97, 95% CI 0.91; 9.72) were not associated. CONCLUSIONS: TB incidence in the country of origin, BCG vaccination and age influence the TSTreaction (size or proportion of TST > or = 10 mm). However the most obvious risk factor for a positive TST is a history of contact with TB.