Designing locative and social media technologies for community collaboration and social benefit : PetSearch

The convergence of locative and social media with collaborative interfaces and data visualisation has expanded the potential of online information provision. Offering new ways for communities to share contextually specific information, it presents the opportunity to expand social media’s current focus on micro self-publishing with applications that support communities to actively address areas of local need. This paper details the design and development of a prototype application that illustrates this potential. Entitled PetSearch, it was designed in collaboration with the Animal Welfare League of Queensland to support communities to map and locate lost, found and injured pets, and to build community engagement in animal welfare issues. We argue that, while established approaches to social and locative media provide a useful foundation for designing applications to harness social capital, they must be re-envisaged if they are to effectively facilitate community collaboration. We conclude by arguing that the principles of user engagement and co-operation employed in this project can be extrapolated to other online approaches that aim to facilitate co-operative problem solving for social benefit.

Effect of mobile phone-based psychotherapy in suicide prevention : a randomized controlled trial in Sri Lanka

We conducted a randomized controlled trial to test whether a Brief Mobile Treatment (BMT) intervention could improve outcomes relative to usual care among suicide attempters. The intervention included training in problem solving therapy, meditation, a brief intervention to increase social support as well as advice on alcohol and other drugs, and mobile phone follow-up. The effect of the intervention was measured in terms of a reduction in suicidal ideation, depression and self-harm at Baseline, six and 12 months. A wait-list control group received usual care. A total of 68 participants was recruited from a Sri Lankan hospital following a suicide attempt. Participants who received the intervention were found to achieve significant improvements in reducing suicidal ideation and depression than those receiving usual care. The BMT group also experienced a significant improvement of social support when compared to the control group. However, the BMT group did not demonstrate a significant effect in reducing actual self-harm and most substance use, and differential effects on alcohol use were restricted to men. Although the present study was limited in revealing which component of the intervention was more effective in preventing suicide, it showed its efficacy in reducing suicide as a whole.

STEM futures and practice, can we teach STEM in a more meaningful and integrated way?

Integrating Science, Technology, Engineering and Mathematics (STEM) subjects can be engaging for students, can promote problem-solving and critical thinking skills and can help build real-world connections. However, STEM has long been an area of some confusion for some educators. While they can see many of the conceptual links between the various domains of knowledge they often struggle to meaningfully integrate and simultaneously teach the content and methodologies of each these areas in a unified and effective way for their students. Essentially the question is;how can the content and processes of four disparate and yet integrated learning areas be taught at the same time? How can the integrity of each of the areas be maintained and yet be learnt in a way that is complementary? Often institutional barriers exitin schools and universities to the integration of STEM. Organizationally, at a departmental and administrative level, the teaching staff may be co-located, but when it comes to classroom practice or the teaching and learning of these areas they are usually taught very separately. They are usually taught in different kinds of spaces, in different ways (using different pedagogical approaches) and at different times. But is this the best way for students to engage with the STEM areas of learning? How can we make learning more integrated, meaningful and engaging for the students?

Checking-in at the library : designing an ambient media system for social learning and collaboration opportunities

The knowledge economy of the 21st century requires skills such as creativity, critical thinking, problem solving, communication and collaboration (Partnership for 21st century skills, 2011) – skills that cannot easily be learnt from books, but rather through learning-by-doing and social interaction. Big ideas and disruptive innovation often result from collaboration between individuals from diverse backgrounds and areas of expertise. Public libraries, as facilitators of education and knowledge, have been actively seeking responses to such changing needs of the general public...

Modeling as a bridge between real world problems and school mathematics

This article argues for an interdisciplinary approach to mathematical problem solving at the elementary school, one that draws upon the engineering domain. A modeling approach, using engineering model eliciting activities, might provide a rich source of meaningful situations that capitalize on and extend students’ existing mathematical learning. The study reports on the developments of 48 twelve-year old students who worked on the Bridge Design activity. Results revealed that young students, even before formal instruction, have the capacity to deal with complex interdisciplinary problems. A number of students created quite appropriate models by developing the necessary mathematical constructs to solve the problem. Students’ difficulties in mathematizing the problem, and in revising and documenting their models are presented and analysed, followed by a discussion on the appropriateness of a modeling approach as a means for introducing complex problems to elementary school students.

Vertical infrastructure inspection using a quadcopter and shared autonomy control

This paper presents a shared autonomy control scheme for a quadcopter that is suited for inspection of vertical infrastructure — tall man-made structures such as streetlights, electricity poles or the exterior surfaces of buildings. Current approaches to inspection of such structures is slow, expensive, and potentially hazardous. Low-cost aerial platforms with an ability to hover now have sufficient payload and endurance for this kind of task, but require significant human skill to fly. We develop a control architecture that enables synergy between the ground-based operator and the aerial inspection robot. An unskilled operator is assisted by onboard sensing and partial autonomy to safely fly the robot in close proximity to the structure. The operator uses their domain knowledge and problem solving skills to guide the robot in difficult to reach locations to inspect and assess the condition of the infrastructure. The operator commands the robot in a local task coordinate frame with limited degrees of freedom (DOF). For instance: up/down, left/right, toward/away with respect to the infrastructure. We therefore avoid problems of global mapping and navigation while providing an intuitive interface to the operator. We describe algorithms for pole detection, robot velocity estimation with respect to the pole, and position estimation in 3D space as well as the control algorithms and overall system architecture. We present initial results of shared autonomy of a quadrotor with respect to a vertical pole and robot performance is evaluated by comparing with motion capture data.

Mentoring pre-service teachers on school students’ differentiated learning

This Australian study explores the mentoring of pre-service teachers in selecting and implementing teaching strategies to meet students‟ learning needs. Two case studies involving 28 mentor teachers in a professional development program and a mentor-mentee partnership during a four week practicum provided data about mentoring teaching strategies for differentiated learning. Findings showed that contexts for learning about differentiation occurred at the pre action, in-action, and post-action stages. Central to each stage were pedagogical knowledge practices such as planning, preparation, classroom management, assessment, and problem solving (reflection-in-action to present solutions to problems) as key to in-action strategising and the mentoring processes. Mentoring pre-service teachers on how to devise teaching strategies for differentiated learning needs to be researched with a wider range of mentors and pre-service teachers, including those at different stages of development.

Mentoring as professional development: ‘growth for both’ mentor and mentee

Teachers need professional development to keep current with teaching practices, although costs for extensive professional development can be prohibitive across an education system. Mentoring provides one way for embedding cost-effective professional development. This mixed-method study includes surveying mentor teachers (n = 101) on a five-part Likert scale and interviews with experienced mentors (n = 10) to investigate professional development for mentors as a result of the mentoring process. Quantitative data were analysed through a pedagogical knowledge framework and qualitative data were collated into themes. Survey data showed that although mentoring of pedagogical knowledge was variable, mentoring pedagogical knowledge practices occurs with the majority of mentors, which requires mentors to evaluate and articulate teaching practices. Qualitative data showed that mentoring acted as professional development and led towards enhancing communication skills, developing leadership roles (problem-solving and building capacity) and advancing pedagogical knowledge. Providing professional development to teachers on mentoring can help to build capacity in two ways: quality mentoring of preservice teachers through explicit mentoring practices, and reflecting and deconstructing teaching practices for mentors’ own pedagogical advancements.

Skill development and social inclusion via peer assisted learning in first-year higher education : an evaluation of student experiences across two law units

Because professions seek graduates who can 'collaborate, share skills and knowledge, and communicate' (Kruck and Reif, 2001, p 37), it is important that university graduates are not equipped solely with the content knowledge of their discipline, but also with prospective employment skills. Furthermore, when students 'interact more in positive ways with their teachers and peers, they gain more in terms of essential skills and competencies, such as critical thinking, problem~solving [and] effective communication' (NSSE, 2000, p 2)./n this way, peer assisted fellowing has the potential to enhance students' professional development, and provide the social inclusion and engagement necessary for effective learning. This session describes two peer assisted learning models embedded within first year QUT Faculty of Law units. Through a partnership between teaching staff, student mentors and mentees, the models aim to facilitate student socialisation whilst supplementing understanding of substantive law with the development of academic and work·related skills. Mentor and mentee perceptions, and program implications, are considered.

Application of multi-criteria decision making methods to compression ignition engine efficiency and gaseous, particulate and greenhouse gas emissions

Compression ignition (CI) engine design is subject to many constraints which presents a multi-criteria optimisation problem that the engine researcher must solve. In particular, the modern CI engine must not only be efficient, but must also deliver low gaseous, particulate and life cycle greenhouse gas emissions so that its impact on urban air quality, human health, and global warming are minimised. Consequently, this study undertakes a multi-criteria analysis which seeks to identify alternative fuels, injection technologies and combustion strategies that could potentially satisfy these CI engine design constraints. Three datasets are analysed with the Preference Ranking Organization Method for Enrichment Evaluations and Geometrical Analysis for Interactive Aid (PROMETHEE-GAIA) algorithm to explore the impact of 1): an ethanol fumigation system, 2): alternative fuels (20 % biodiesel and synthetic diesel) and alternative injection technologies (mechanical direct injection and common rail injection), and 3): various biodiesel fuels made from 3 feedstocks (i.e. soy, tallow, and canola) tested at several blend percentages (20-100 %) on the resulting emissions and efficiency profile of the various test engines. The results show that moderate ethanol substitutions (~20 % by energy) at moderate load, high percentage soy blends (60-100 %), and alternative fuels (biodiesel and synthetic diesel) provide an efficiency and emissions profile that yields the most “preferred” solutions to this multi-criteria engine design problem. Further research is, however, required to reduce Reactive Oxygen Species (ROS) emissions with alternative fuels, and to deliver technologies that do not significantly reduce the median diameter of particle emissions.

Learning with FIRST LEGO League

Robotics is a valuable tool for engaging students in the hands-on application of science, technology, engineering, and mathematics (STEM) concepts. Robotics competitions such as FIRST LEGO League (FLL) can increase students’ interest in the STEM subjects and can foster their problem solving and teamwork skills. This paper reports on a study investigating students’ perceptions on the influence of participating in a FLL competition on their learning. The students completed questionnaires regarding their perceptions of their learning during the FLL challenge and were also interviewed to gain a deeper understanding of their questionnaire responses. The results show that the students were engaged with the FLL challenge and held positive views regarding their experience. The results also suggest that students involved with the FLL challenge improved their learning about real-world applications, problem solving, engagement, communication, and the application of the technology/engineering cycle.

Teaching design thinking : Expanding horizons in design education

The term design thinking is increasingly used to mean the human-centred 'open' problem solving process decision makers use to solve real world 'wicked' problems. Claims have been made that design thinking in this sense can radically improve not only product innovation but also decision making in other fields, such as management, public health, and organizations in general. Many design and management schools in North America and elsewhere now include course offerings in design thinking though little is known about how successful these are with students. The lack of such courses in Australia presents an opportunity to design a curriculum for design thinking, employing design thinking's own practices. This paper describes the development of a design thinking course at Swinburne University taught simultaneously in Melbourne and Hong Kong. Following a pilot of the course in Semester 1, 2011 with 90 enrolled students across the two countries, we describe lessons learned to date and future course considerations as it is being taught in its second iteration.

Reorganizing a technical services division using collaborative evidence based information practice at Auraria Library

The article focuses on the evidence-based information practice (EBIP) applied at the Auraria Library in Denver, Colorado during the reorganization of its technical services division. Collaboration processes were established for the technical services division through the reorganization and redefinition of workflows. There are several factors that form part of the redefinition of roles including personal interests, department needs, and library needs. A collaborative EBIP environment was created in the division by addressing issues of workplace hierarchies, by the distribution of problem solving, and by the encouragement of reflective dialogue.

Distributing leadership and cultivating dialogue with collaborative EBIP

The purpose of this paper is to demonstrate the efficacy of collaborative evidence based information practice (EBIP) as an organizational effectiveness model. Shared leadership, appreciative inquiry and knowledge creation theoretical frameworks provide the foundation for change toward the implementation of a collaborative EBIP workplace model. Collaborative EBIP reiterates the importance of gathering the best available evidence, but it differs by shifting decision-making authority from "library or employer centric" to "user or employee centric". University of Colorado Denver Auraria Library Technical Services department created a collaborative EBIP environment by flattening workplace hierarchies, distributing problem solving and encouraging reflective dialogue. By doing so, participants are empowered to identify problems, create solutions, and become valued and respected leaders and followers. In an environment where library budgets are in jeopardy, recruitment opportunities are limited and the workplace is in constant flux, the Auraria Library case study offers an approach that maximizes the capability of the current workforce and promotes agile responsiveness to industry and organizational challenges. Collaborative EBIP is an organizational model demonstrating a process focusing first on the individual and moving to the collective to develop a responsive and high performing business unit, and in turn, organization.

Property case competition : multi-stakeholder reflection

Pacific Rim Real Estate Society has conducted four property case competitions from 2009 to 2012. The competition provides opportunities for undergraduate students to present their proposal on a given case study. All students were locked down with their four team members for five hours without external help to ensure a level playing field across participants. Students prepared their presentation and defended their arguments in front of experts in property industry and academia. The aim of this paper is reflecting on the feedback received from stakeholders involved in the case competition. Besides exploring what students have gained from the competitions, this paper provides an insight on the opportunities and challenges for the new format of competition to be introduced in 2013. Over the last four competitions, there were three universities participated in all the four consecutive events, four universities partook in two events and another four universities only competed once. Some universities had a great advantage by having previous experiences by participating in similar international business competitions. Findings show that the students have benefited greatly from the event including improving their ability in problem solving and other non-technical skills. Despite the aforementioned benefits, the PRRES closed-book case competition is proven not viable thus future competition needs to minimise the travel and logistic cost.