Screening of breast lesions: a comparative study between mammography, B-mode ultrasonography, sonoelastography and histological results

Objective To compare the capacity of mammography, sonoelastography, B-mode ultrasonography and histological analysis to differentiate benign from malignant breast lesions. Materials and Methods A total of 12 histopathologically confirmed breast lesions were documented. The lesions were assessed by means of mammography, B-mode ultrasonography and sonoelastography, and histopathological analysis was utilized as a gold standard. Sensitivity and specificity were calculated. A receiver operating characteristic (ROC) curve was constructed to evaluate the diagnostic performance of the mentioned techniques. Results Sensitivity and specificity in the differentiation between benign and malignant lesions were respectively 100% and 50% for mammography, 100% and 71% for B-mode ultrasonography, and 67% and 83% for sonoelastography. The area under the ROC curve was calculated for the three imaging modalities and corresponded to 0.792 for mammography, 0.847 for B-mode ultrasonography, and 0.806 for sonoelastography. Conclusion Sonoelastography demonstrated higher specificity and lower sensitivity as compared with mammography and B-mode ultrasonography. On the other hand, B-mode ultrasonography had the largest area under the ROC curve. Sonoelastography has demonstrated to be a promising technique to detect and evaluate breast lesions, and could potentially reduce the number of unnecessary biopsies.

Mode et costume au fil du temps

pour un aperçu voir dossier de presse http://www.svha-vd.ch/fileadmin/user_upload/PDF/rhv123_dossier_presse_leger.pdf

Expanding to institutionally different countries. Reasons, Firm International Experience, and Entry Mode Choice

We examine entry mode choice and its consequences when a multinational enterprise (MNE) expands into an institutionally different country. We argue that discussions of entry mode should distinguish between informal (e.g., culture) and formal (e.g., laws) institutions, and should take into account not just the home country of the MNE and its distance to the focal host country, but the MNE's overall footprint and experience across the world in general, especially in countries with an institutional structure that is similar to that of the focal host country. Specifically, we argue that firms with experience in countries with different informal institutions will be more likely to enter via acquisitions than firms without such experience, that such experience will not matter as much in the case of formal institutions, and that such firms will exit more quickly when they enter via equity alliances than through full acquisitions. We also distinguish between balanced and unbalanced alliances and argue that balanced alliances will be more enduring, but only when the host country is culturally (not legally) different from the other countries where the MNE has experience. Our arguments suggest that entry mode should be conditioned on a firm's experience in other markets, and that intercountry differences in formal versus informal institutions have distinct influences on entry mode.

Financement et mode d'organisation des hôpitaux suisses : revue du recueil législatif de 1991 à 2009

Le financement des établissements de soins a connu dans le courant de l'année 2007 d'importants changements législatifs. De l'introduction de la tarification à l'activité sur la base des diagnostic-related groups (DRG) à la mise en concurrence directe des hôpitaux, qu'ils appartiennent au secteur public ou au secteur privé, de l'ingérence de la Confédération dans la planification hospitalière (jusque là domaine réservé des Cantons) à la mise au premier plan des critères de qualité dans l'évaluation des établissements hospitaliers, les exemples ne manquent pas pour illustrer le changement conceptuel auquel nous assistons. L'auteur de ces lignes, privilégiant l'approche historique à l'approche normative, s'est demandé quels étaient les prémices de ce changement législatif et s'est confronté aux différents textes qui ont émaillé les débats de ces vingt dernières années, qu'ils émanent du pouvoir exécutif (messages aux chambres fédérales, ordonnances d'application) ou du pouvoir législatif (textes de loi) afin d'en dégager la cohérence politique. Ce mémoire suit donc une ligne strictement chronologique. Il s'inspire des différents travaux parlementaires. A la lecture de ces textes, il apparaît que, pour les parlementaires, la question du financement des hôpitaux n'est qu'une partie, parfois essentielle, parfois accessoire, selon les époques et l'amplitude du champ d'application du document législatif, du financement des soins par l'assurance-maladie. Les grands principes qui régissent l'assurance-maladie s'appliquent donc nécessairement au financement des hôpitaux. Pour cette raison, il est apparu judicieux à l'auteur de ces lignes de ne pas séparer les deux problèmes et de se plonger dans un premier temps dans les débats qui ont eu cours lors de l'adoption de la nouvelle loi sur l'assurance-maladie (LAMaI) en 1994. [Auteur, p. 5]

Mode of interaction of the Gαo subunit of heterotrimeric G proteins with the GoLoco1 motif of Drosophila Pins is determined by guanine nucleotides.

Drosophila GoLoco motif-containing protein Pins is unusual in its highly efficient interaction with both GDP- and the GTP-loaded forms of the α-subunit of the heterotrimeric Go protein. We analysed the interactions of Gαo in its two nucleotide forms with GoLoco1-the first of the three GoLoco domains of Pins-and the possible structures of the resulting complexes, through combination of conventional fluorescence and FRET measurements as well as through molecular modelling. Our data suggest that the orientation of the GoLoco1 motif on Gαo significantly differs between the two nucleotide states of the latter. In other words, a rotation of the GoLoco1 peptide in respect with Gαo must accompany the nucleotide exchange in Gαo. The sterical hindrance requiring such a rotation probably contributes to the guanine nucleotide exchange inhibitor activity of GoLoco1 and Pins as a whole. Our data have important implications for the mechanisms of Pins regulation in the process of asymmetric cell divisions.

The internal wave field in Sau reservoir : Observation and modeling of a third vertical mode

Water withdrawal from Mediterranean reservoirs in summer is usually very high. Because of this, stratification is often continuous and far from the typical two-layered structure, favoring the excitation of higher vertical modes. The analysis of wind, temperature, and current data from Sau reservoir (Spain) shows that the third vertical mode of the internal seiche (baroclinic mode) dominated the internal wave field at the beginning of September 2003. We used a continuous stratification two-dimensional model to calculate the period and velocity distribution of the various modes of the internal seiche, and we calculated that the period of the third vertical mode is ;24 h, which coincides with the period of the dominating winds. As a result of the resonance between the third mode and the wind, the other oscillation modes were not excited during this period

Osakeperusteinen palkitseminen: maksuttoman osakkeen hyödyntäminen kannustinjärjestelmissä

Tutkielman tavoitteena on selvittää osakeyhtiön palkitsemisjärjestelmiin liittyviä kysymyksiä päämies–agenttisuhteiden ja osakeyhtiöoikeudellisten periaatteiden kautta. Tutkielmassa selvitetään, kuinka maksuttomia osakkeita voidaan hyödyntää julkisen osakeyhtiön palkitsemisjärjestelmissä ja mitä haasteita ja mahdollisuuksia niiden käyttöön liittyy. Tutkimusmetodi työssä on lainopillinen ja aihetta lähestytään luontevasti kauppatieteellisen ja oikeustieteellisen näkökulman yhdistävän oikeustaloustieteen kautta. Ensisijaisena aineistona tutkielmassa käytetään voimassaolevaa lainsäädäntöä valmisteluaineistoineen ja näkökulmaa syvennetään aiemmin voimassa olleen lainsäädännön tarkastelulla. Toissijaisena aineistona tutkielmassa käytetään sekä eri asiantuntijoiden oikeudellista kirjallisuutta että palkitsemisen asiantuntijoiden laatimaa kirjallisuutta Suomesta ja muista länsimaista. Teoreettista työtä on syvennetty asiantuntijahaastattelulla ja yhtiöiden sijoittajatiedosta saatavalla informaatiolla. Merkittävin osakeyhtiön johdon ja yhtiön välisen suhteen tehokkuutta alentava seikka on päämies–agenttisuhteen valvontaongelma. Tämä liittyy päämies - agenttisuhteeseen, joka ilmenee negatiivisesti yhtiön ja yhtiön johdon intressien ristiriitatilanteissa. Valvontaongelma voi aiheuttaa ylimääräisiä transaktiokustannuksia ja tämä näkyy yhtiön toiminnan tehokkuuden laskemisena. Päämies–agenttisuhteen ratkaisuna lainsäädäntö ja erilaiset valvonnan keinot ovat tehottomia ja nykyisen yhtiöoikeudellisen ajattelun vastaisia. Tehokkaimmin valvontaongelma saadaan ratkaistua erilaisin kannustimin tapahtuvalla johdon ohjauksella. Osakesidonnainen palkitseminen on suosituin johdon ja yhtiön intressien yhdistämisen keino. Osakesidonnainen palkitseminen on parhaimmillaan eri osapuolien näkökulmasta sitouttavaa ja kannustavaa mutta osakepalkitsemisen käyttöön liittyy myös riskejä. Eräs keskeisistä yhtiöoikeudellisista periaatteista on yhdenvertaisuus, jota saatetaan loukata eri palkitsemisjärjestelmiä käytettäessä. Varojen jakoon ja järjestelmien rahoitukseen liittyy niin ikään riskejä, jotka saattavat vaarantaa järjestelmän onnistumisen. Liian avokätiset palkkiojärjestelmät taas saattavat aiheuttaa yhtiön eri sidosryhmien piirissä tyytymättömyyttä joka taas alentaa järjestelmän tehokkuutta. Yhtiön johto vastaa yhtiön strategian toteutumisesta ja linjaa Corporate Governance käytännön mukaisesti johdon palkitsemisen tavat. Yhtiön johto on kuitenkin päätöksistään vastuussa yhtiön residuaalioikeuden omaaville päämiehille, eli osakkeenomistajille. Vaikka yhtiön johto vastaa viime kädessä yhtiön toiminnasta, sen on huomioitava toiminnassaan yhtiön toiminnan tarkoitus ja sitä kautta yksittäisen osakkeenomistajan etu. Vaikka osakeyhtiössä toteutettaisiin enemmistöomistajan valitsemaa toimintalinjaa, osakeyhtiön yhdenvertaisuusperiaate korostaa juuri vähemmistöosakkeenomistajan asemaa. Johdon fidusiaaristen velvoitteiden voidaankin nähdä korostuvan johdon suhteessa vähemmistöosakkeenomistajaan. Tämä on huomioitava myös palkitsemisjärjestelmissä. Johdon palkitsemisjärjestelmien suunnittelussa ja toteutuksessa on suunnattava keskeinen huomio sen tavoitteiden toteutumiseen, eli yksittäisen osakkeenomistajan omistuksen arvon kasvattamiseen pidemmällä aikavälillä, pitäen huolta osakeyhtiön kantavista periaatteista.

Estudi per a la implantació d'un ERP en una empresa de fabricació de material per a minusvàlids

Un sistema ERP és una aplicació que ens permet fer la gestió dels processos de negoci de una forma àgil. Aquest projecte tracta sobre l’estudi per a la implantació d’un ERP en una empresa de fabricació de material per a minusvàlids. Inicialment es farà una part teòrica sobre el que són els sistemes ERP. A continuació, s’analitza el funcionament de l’empresa on es realitzarà l’estudi. Finalment, s’estudien tres solucions ERP del mercat actual i es selecciona la que millor s’adapta a les necessitats i requeriments en vistes a una possible implantació.

Módulo eletrônico de controle para válvulas solenóides

This technical note describes a new and simple electronic circuit for driving solenoid valves. The circuit is based on a single integrated circuit DRV103, which is able to drive resistive or inductive loads up to 1.5 A. Switching of 12-V loads can be controlled by TTLlevel signals in two distinct steps. Initially, 12 V is applied during 110 ms, followed by 4.2 V RMS until the end of the activation TTL pulse. This mode of operation is particularly suitable to drive solenoids, because it requires a higher voltage to start and a lower maintenance voltage. By using this circuit, power consumption and heating are reduced and the solenoid lifetime is enhanced. Moreover, this circuit is specially appropriated to build computercontrolled solenoid valves systems.

Offdesign operation of kraft recovery boiler

A model to solve heat and mass balances during the offdesign load calculations was created. These equations are complex and nonlinear. The main new ideas used in the created offdesign model of a kraft recovery boiler are the use of heat flows as torn iteration variables instead of the current practice of using the mass flows, vectorizing equation solving, thus speeding up the process, using non dimensional variables for solving the multiple heat transfer surface problem and using a new procedure for calculating pressure losses. Recovery boiler heat and mass balances are reduced to vector form. It is shown that these vectorized equations can be solved virtually without iteration. The iteration speed is enhanced by the use of the derived method of calculating multiple heat transfer surfaces simultaneously. To achieve this quick convergence the heat flows were used as the torn iteration parameters. A new method to handle pressure loss calculations with linearization was presented. This method enabled less time to be spent calculating pressure losses. The derived vector representation of the steam generator was used to calculate offdesign operation parameters for a 3000 tds/d example recovery boiler. The model was used to study recovery boiler part load operation and the effect of the black liquor dry solids increase on recovery boiler dimensioning. Heat flows to surface elements for part load calculations can be closely approximated with a previously defined exponent function. The exponential method can be used for the prediction of fouling in kraft recovery boilers. For similar furnaces the firing of 80 % dry solids liquor produces lower hearth heat release rate than the 65 % dry solids liquor if we fire at constant steam flow. The furnace outlet temperatures show that capacity increase with firing rate increase produces higher loadings than capacity increase with dry solids increase. The economizers, boiler banks and furnaces can be dimensioned smaller if we increase the black liquor dry solids content. The main problem with increased black liquor dry solids content is the decrease in the heat available to superheat. Whenever possible the furnace exit temperature should be increased by decreasing the furnace height. The increase in the furnace exit temperature is usually opposed because of fear of increased corrosion.

The Effect of Operational Disturbances on Reliability and Operation Time Distribution of NCmachine Tools in FMS

This thesis concentrates on studying the operational disturbance behavior of machine tools integrated into FMS. Operational disturbances are short term failures of machine tools which are especially disruptive to unattended or unmanned operation of FMS. The main objective was to examine the effect of operational disturbances on reliability and operation time distribution for machine tools. The theoretical part of the thesis covers the fimdamentals of FMS relating to the subject of this study. The concept of FMS, its benefits and operator's role in FMS operation are reviewed. The importance of reliability is presented. The terms describing the operation time of machine tools are formed by adopting standards and references. The concept of failure and indicators describing reliability and operational performance for machine tools in FMSs are presented. The empirical part of the thesis describes the research methodology which is a combination of automated (ADC) and manual data collection. By using this methodology it is possible to have a complete view of the operation time distribution for studied machine tools. Data collection was carried out in four FMSs consisting of a total of 17 machine tools. Each FMS's basic features and the signals of ADC are described. The indicators describing the reliability and operation time distribution of machine tools were calculated according to collected data. The results showed that operational disturbances have a significant influence on machine tool reliability and operational performance. On average, an operational disturbance occurs every 8,6 hours of operation time and has a down time of 0,53 hours. Operational disturbances cause a 9,4% loss in operation time which is twice the amount of losses caused by technical failures (4,3%). Operational disturbances have a decreasing influence on the utilization rate. A poor operational disturbance behavior decreases the utilization rate. It was found that the features of a part family to be machined and the method technology related to it are defining the operational disturbance behavior of the machine tool. Main causes for operational disturbances were related to material quality variations, tool maintenance, NC program errors, ATC and machine tool control. Operator's role was emphasized. It was found that failure recording activity of the operators correlates with the utilization rate. The more precisely the operators record the failure, the higher is the utilization rate. Also the FMS organizations which record failures more precisely have fewer operational disturbances.

Towards integrated operation of membrane bioreactors : effects of aeration on biological and filtration performance

Two experimental studies evaluated the effect of aerobic and membrane aeration changes on sludge properties, biological nutrient removal and filtration processes in a pilot plant membrane bioreactor. The optimal operating conditions were found at an aerobic dissolved oxygen set-point (DO) of 0.5mgO2L-1 and a membrane specific aeration demand (SADm) of 1mh-1, where membrane aeration can be used for nitrification. Under these conditions, a total flow reduction of 42% was achieved (75% energy reduction) without compromising nutrient removal efficiencies, maintaining sludge characteristics and controlled filtration. Below these optimal operating conditions, the nutrient removal efficiency was reduced, increasing 20% for soluble microbial products, 14% for capillarity suction time and reducing a 15% for filterability. Below this DO set-point, fouling increased with a transmembrane pressure 75% higher. SADm below 1mh-1 doubled the values of transmembrane pressure, without recovery after achieving the initial conditions

An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials

A thermodynamically consistent damage model for the simulation of progressive delamination under variable mode ratio is presented. The model is formulated in the context of the Damage Mechanics. The constitutive equation that results from the definition of the free energy as a function of a damage variable is used to model the initiation and propagation of delamination. A new delamination initiation criterion is developed to assure that the formulation can account for changes in the loading mode in a thermodynamically consistent way. The formulation proposed accounts for crack closure effets avoiding interfacial penetration of two adjacent layers aftercomplete decohesion. The model is implemented in a finite element formulation. The numerical predictions given by the model are compared with experimental results

Eliminació d'artefactes en EGG mitjançant l'ús de la Multivariate Empirical Mode Decomposition

La tècnica de l’electroencefalograma (EEG) és una de les tècniques més utilitzades per estudiar el cervell. En aquesta tècnica s’enregistren els senyals elèctrics que es produeixen en el còrtex humà a través d’elèctrodes col•locats al cap. Aquesta tècnica, però, presenta algunes limitacions a l’hora de realitzar els enregistraments, la principal limitació es coneix com a artefactes, que són senyals indesitjats que es mesclen amb els senyals EEG. L’objectiu d’aquest treball de final de màster és presentar tres nous mètodes de neteja d’artefactes que poden ser aplicats en EEG. Aquests estan basats en l’aplicació de la Multivariate Empirical Mode Decomposition, que és una nova tècnica utilitzada per al processament de senyal. Els mètodes de neteja proposats s’apliquen a dades EEG simulades que contenen artefactes (pestanyeigs), i un cop s’han aplicat els procediments de neteja es comparen amb dades EEG que no tenen pestanyeigs, per comprovar quina millora presenten. Posteriorment, dos dels tres mètodes de neteja proposats s’apliquen sobre dades EEG reals. Les conclusions que s’han extret del treball són que dos dels nous procediments de neteja proposats es poden utilitzar per realitzar el preprocessament de dades reals per eliminar pestanyeigs.