Anaerobic Digestion Project Working Guide: A Case Study Analysis and Procedural Summary of Anaerobic Digester Projects for the United States Agricultural Sector

Renewable energy such as biomass has given markets, including dairy farms, an effective approach to reducing the costs of sustaining a profitable business. Anaerobic digestion systems offer dairy farms a very effective way to reduce manure odor, comply with soil and water pollution regulations, manufacture compost for general market sales, produce irrigation capacity and generate on-site electricity as well as the ability to sell excess electricity back to the local utilities. This project defines anaerobic digestion technologies and practices, analyzes case studies and presents a step-by-step anaerobic digestion project startup checklist. The result is an anaerobic digestion project working guide that acts as a tool to aid dairy farmers in their own potential anaerobic digestion project.

The Effectiveness of Rain Gardens as a Low-Impact Development Strategy for Storm Water Pollution Reduction in Western Washington

Stormwater runoff is a major cause of surface water pollution in western Washington and cost-effective control measures are needed to reduce contamination of receiving waters. This project evaluated the performance efficiency and costs of installing a residential rain garden by inspecting two gardens and testing water quality samples in one. Infiltration through the garden was effective in reducing metals and nutrients as indicated by reductions in copper and nitrate concentrations of 75% and 97%, respectively. The costs were affordable for most homeowners and cost-effective compared to other options. After doing on-site investigations, the storm water manual for the State of Washington was reviewed and eight recommendations were made for improving it.

Avoiding Extinction: An Evaluation of Short-Term Recovery Recommendations for the Endangered Rio Grande Silvery Minnow

The endangered Rio Grande silvery minnow (Hybognathus amarus; RGSM) is nearing extinction and requires immediate recovery actions. In a draft report to the Middle Rio Grande Program, a Program Advisory Panel (PAP) recommended 34 short-term recovery measures to be implemented within the next five years, and 21 long-term recovery actions. However, these recommendations need further analysis to determine if and how the actions could be implemented. This project evaluated short-term recommendations provided by the PAP to identify the most effective and rank the relative importance of the actions. These recommendations were divided into 7 recovery categories: population augmentation (5 recommendations); hydrologic regimen (4 recommendations); physical habitat (3 recommendations); biological component of habitat (2 recommendations); population monitoring (6 recommendations); monitoring, analysis, and modeling (12 recommendations); and information and planning (2 recommendations). Each recommendation was evaluated for its potential to produce anticipated recovery progress for the RGSM based on assessments of the degree of feasibility, cost effectiveness, and associated potential consequences if fully implemented. In addition, other alternatives in a range of options were also considered where applicable. In each case, recommendations were evaluated from on-site visits, interviews with researchers and resource managers, and literature review. Based on the research findings, three major groupings of the recovery categories were identified: natural aspects of recovery, program aspects of recovery, and emergency measures. At least one recovery category within each major grouping was considered important by the respondents, which indicates that each grouping is of high importance in relation to the situation at hand. However, actions within each grouping have varying priorities given constraints on available resources, time, and budget. An integrated approach that accounts for the complexity of the river system and the species itself was considered the best approach to avoid extinction while ensuring long-term sustainability. Results of these analyses were provided directly to the PAP for their review, and it is anticipated that project results could advance implementation of the most appropriate immediate recovery actions needed to prevent extinction of the RGSM.

Interplay between sublattice and spin symmetry breaking in graphene

We study the effect of sublattice symmetry breaking on the electronic, magnetic, and transport properties of two-dimensional graphene as well as zigzag terminated one- and zero-dimensional graphene nanostructures. The systems are described with the Hubbard model within the collinear mean field approximation. We prove that for the noninteracting bipartite lattice with an unequal number of atoms in each sublattice, in-gap states still exist in the presence of a staggered on-site potential ±Δ/2. We compute the phase diagram of both 2D and 1D graphene with zigzag edges, at half filling, defined by the normalized interaction strength U/t and Δ/t, where t is the first neighbor hopping. In the case of 2D we find that the system is always insulating, and we find the Uc(Δ) curve above which the system goes antiferromagnetic. In 1D we find that the system undergoes a phase transition from nonmagnetic insulator for U

Recommendation of RILEM TC 178-TMC: Testing and modelling chloride penetration in concrete

This RILEM Technical Recommendation intends to give a general description of methods of sampling for obtaining chloride concentration profiles in concrete, applicable both for laboratory cast concrete specimens, for concrete cores taken from structures and for testing on site. These sampling procedures may be applied for obtaining concentration profiles of any other chemical species present in concrete.

Percepción de los profesionales de enfermería y auxiliares de enfermería sobre cultura de seguridad del paciente en el área quirúrgica

Objetivos: Evaluar las percepciones, opiniones y conductas que tienen enfermeros y auxiliares de enfermería sobre seguridad del paciente en el servicio quirúrgico de un hospital público del Sistema Nacional de Salud español. Describir fortalezas y debilidades/oportunidades de mejora según criterios de la Agency for Healthcare Research and Quality y conocer el número de incidentes de seguridad notificados. Método: Estudio observacional, transversal, llevado a cabo utilizando la versión española del cuestionario Hospital Survey on Patient Safety Culture. La muestra estuvo constituida por profesionales de enfermería que aceptaron participar en el estudio voluntariamente y cumplían los criterios de selección. Se realizó un análisis descriptivo e inferencial en función de la naturaleza de las variables y las condiciones de aplicación de los test estadísticos. Significación p < 0,05. Resultados: Respondieron 74 profesionales de enfermería (63,2%). No se encontró ninguna fortaleza en el servicio quirúrgico, y las áreas principales que necesitan mejora corresponden a «Dotación de personal» (64,0%) y «Apoyo de la gerencia del hospital en materia de seguridad del paciente» (52,9%). El 52,3% (n = 65) califica el grado de seguridad del paciente entre 7 y 8,99 (en una escala de 10); el 79,7% (n = 72) no notificó ningún incidente durante el último año. La varianza total explicada por el modelo de regresión fue 0,56 para «Frecuencia de eventos notificados» y 0,26 para «Percepción de seguridad». Conclusiones: Percepción más positiva sobre cultura de seguridad del paciente a nivel de unidad/servicio. Las debilidades identificadas pueden servir para diseñar actividades concretas de intervención para mejorar la cultura de seguridad del paciente en otros servicios quirúrgicos del entorno.

Can model Hamiltonians describe the electron–electron interaction in π-conjugated systems?: PAH and graphene

Model Hamiltonians have been, and still are, a valuable tool for investigating the electronic structure of systems for which mean field theories work poorly. This review will concentrate on the application of Pariser–Parr–Pople (PPP) and Hubbard Hamiltonians to investigate some relevant properties of polycyclic aromatic hydrocarbons (PAH) and graphene. When presenting these two Hamiltonians we will resort to second quantisation which, although not the way chosen in its original proposal of the former, is much clearer. We will not attempt to be comprehensive, but rather our objective will be to try to provide the reader with information on what kinds of problems they will encounter and what tools they will need to solve them. One of the key issues concerning model Hamiltonians that will be treated in detail is the choice of model parameters. Although model Hamiltonians reduce the complexity of the original Hamiltonian, they cannot be solved in most cases exactly. So, we shall first consider the Hartree–Fock approximation, still the only tool for handling large systems, besides density functional theory (DFT) approaches. We proceed by discussing to what extent one may exactly solve model Hamiltonians and the Lanczos approach. We shall describe the configuration interaction (CI) method, a common technology in quantum chemistry but one rarely used to solve model Hamiltonians. In particular, we propose a variant of the Lanczos method, inspired by CI, that has the novelty of using as the seed of the Lanczos process a mean field (Hartree–Fock) determinant (the method will be named LCI). Two questions of interest related to model Hamiltonians will be discussed: (i) when including long-range interactions, how crucial is including in the Hamiltonian the electronic charge that compensates ion charges? (ii) Is it possible to reduce a Hamiltonian incorporating Coulomb interactions (PPP) to an 'effective' Hamiltonian including only on-site interactions (Hubbard)? The performance of CI will be checked on small molecules. The electronic structure of azulene and fused azulene will be used to illustrate several aspects of the method. As regards graphene, several questions will be considered: (i) paramagnetic versus antiferromagnetic solutions, (ii) forbidden gap versus dot size, (iii) graphene nano-ribbons, and (iv) optical properties.

O patrimônio invisível: arquitetura popular urbana de municípios do período colonial brasileiro

No Brasil, ações institucionais de preservação de bens imóveis tem foco principal na arquitetura erudita, colocando em segundo plano de importância a arquitetura produzida por indivíduos com formação escassa e empírica. Este trabalho contribui para o reconhecimento da arquitetura popular (vernácula) como patrimônio cultural. Trabalha-se na criação de acervo fotográfico de edificações e equipamentos urbanos produzidos durante o período colonial, nos municípios de Tiradentes, Mariana, Ouro Preto e Diamantina (Minas Gerais). São realizadas visitas in loco para reconhecimento e seleção de objetos a serem fotografados. O registro fotográfico é realizado com câmera digital reflex de objetiva simples, privilegiando-se objetos cuja deterioração permite a observação de materiais e técnicas construtivas. Como resultado parcial da pesquisa, foram produzidas 4.522 imagens, documentando o abandono de edificações residenciais e chafarizes setecentistas e oitocentistas, bem como a descaracterização de exemplares de edificações coloniais populares habitadas, cujas paredes de adobe e pau-a-pique são substituídas por alvenaria de tijolos pelos moradores. Tornam-se necessárias ações para o reconhecimento – no âmbito do Poder Público e das comunidades locais – da relevância histórica da arquitetura popular, entendida como produto articulado e coerente de contribuições das culturas distintas que formaram essa região do Brasil.

Synthesis, Modification, and Application of Siloxane Materials for Environmental Sensing

As human populations and resource consumption increase, it is increasingly important to monitor the quality of our environment. While laboratory instruments offer useful information, portable, easy to use sensors would allow environmental analysis to occur on-site, at lower cost, and with minimal operator training. We explore the synthesis, modification, and applications of modified polysiloxane in environmental sensing. Multiple methods of producing modified siloxanes were investigated. Oligomers were formed by using functionalized monomers, producing siloxane materials containing silicon hydride, methyl, and phenyl side chains. Silicon hydride-functionalized oligomers were further modified by hydrosilylation to incorporate methyl ester and naphthyl side chains. Modifications to the siloxane materials were also carried out using post-curing treatments. Methyl ester-functionalized siloxane was incorporated into the surface of a cured poly(dimethylsiloxane) film by siloxane equilibration. The materials containing methyl esters were hydrolyzed to reveal carboxylic acids, which could later be used for covalent protein immobilization. Finally, the siloxane surfaces were modified to incorporate antibodies by covalent, affinity, and adsorption-based attachment. These modifications were characterized by a variety of methods, including contact angle, attenuated total reflectance Fourier transform infrared spectroscopy, dye labels, and 1H nuclear magnetic resonance spectroscopy. The modified siloxane materials were employed in a variety of sensing schemes. Volatile organic compounds were detected using methyl, phenyl, and naphthyl-functionalized materials on a Fabry-Perot interferometer and a refractometer. The Fabry-Perot interferometer was found to detect the analytes upon siloxane extraction by deformation of the Bragg reflectors. The refractometer was used to determine that naphthyl-functionalized siloxanes had elevated refractive indices, rendering these materials more sensitive to some analytes. Antibody-modified siloxanes were used to detect biological analytes through a solid phase microextraction-mediated enzyme linked immunosorbent assay (SPME ELISA). The SPME ELISA was found to have higher analyte sensitivity compared to a conventional ELISA system. The detection scheme was used to detect Escherichia coli at 8500 CFU/mL. These results demonstrate the variety of methods that can be used to modify siloxanes and the wide range of applications of modified siloxanes has been demonstrated through chemical and biological sensing schemes.

Landfill Leachate Toxicity to Oncorhynchus mykiss (Rainbow Trout) at the Merrick Landfill

At the Merrick Landfill, located outside of North Bay (Ontario, CA), an investigation into the potential for an environmental impact to the Little Sturgeon River as a result of landfill leachate discharge was undertaken using toxicity testing using 96 hour acute lethality on Oncorhynchus mykiss (Rainbow Trout). Landfill leachate may present a risk to receiving environments as it is comprised of an array of chemicals including organics, ammonia, and metals. Testing was conducted in three phases, firstly testing was completed on site throughout an existing natural attenuation zone where the presence of several groundwater seeps down gradient of the site had been identified to determine the effectiveness of the existing leachate control features at reducing the environmental risks. These tests indicated that the existing capture strategies were largely effective at reducing toxicity risks to the receiving environment. Testing was also completed on two pilot-scale hybrid-passive treatment systems to determine their effectiveness for leachate treatment. Summer performance of a constructed gravel wetland system was also shown to be effective at reducing the toxicity of the landfill leachate at the site. Lastly in order to support evaluation of leachate treatment requirements, a toxicity identification evaluation (TIE) was performed to determine the principle cause of toxicity within the leachate. Based on water chemistry analyses of samples collected at various locations at the site, the TIE identified ammonia toxicity as the primary source of toxicity in the leachate, with a secondary focus on metal toxicity.

Biologic therapies and non-melanoma skin cancer rates in three chronic immune-mediated diseases

Trabalho Final do Curso de Mestrado Integrado em Medicina, Faculdade de Medicina, Universidade de Lisboa, 2014

Estatinas e risco de diabetes : revisão sistemática

Trabalho Final do Curso de Mestrado Integrado em Medicina, Faculdade de Medicina, Universidade de Lisboa, 2014

Acidentes com perfurocortantes em profissionais da assistência do SAMU, Maceió

Introdução – Os acidentes de trabalho envolvendo material biológico entre profissionais de saúde são frequentes e constituem um problema de saúde pública, pois representam uma preocupação constante das instituições e dos profissionais de saúde. Os profissionais do pré hospitalar tornam-se mais expostos pela tensão emocional vivida, pela natureza e circunstâncias do seu exercício profissional. Objetivos – Identificar a ocorrência de acidentes ocupacionais com materiais perfurocortantes nos profissionais de saúde do SAMU Maceió; identificar os acidentes mais frequentes, os períodos em que ocorrem e avaliar as condutas tomadas após o acidente. Métodos – Estudo descritivo com orientação analítico-descritiva desenvolvido numa amostra de 40 profissionais de saúde, Enfermeiro socorrista, Técnico Enfermagem e Médicos Socorristas. A recolha de informação foi suportada num questionário elaborado para o efeito. Resultados – A nossa amostra apresentou uma média de idades de 39,2 anos, o sexo feminino foi maioritário com 70,0% e 50,0% trabalha entre 6 a 10 anos na unidade. A maioria dos acidentes perfuro cortantes foram provocados por agulhas (75,0%) e dos quais não resultou incapacidade em 75%. A maioria dos acidentes ocorreram no verão e no turno da noite. Grande número de profissionais (70%) não cumpriu com as normas de procedimentos após o acidente e 80,0% dos profissionais não realizaram a quimioprofilaxia, não cumprindo com o protocolo do Ministérios da Saúde do Brasil. O paciente-fonte foi identificado em 87,5% dos casos mas verificamos uma subnotificação dos acidentes pois 45,0% dos profissionais não o fizeram. Nenhum profissional frequentou formação específica sobre acidentes de trabalho Conclusões – Verificamos uma alta incidência de acidentes perfurocortantes entre os profisionais do SAMU. Existe uma subnotificação do acidente e um déficite nas condutas apropriadas após o acidente. A população estudada necessita de uma maior sensibilização/formação quanto às medidas preventivas de segurança no ambiente de trabalho e motivação para o controle e prevenção dos acidentes ocupacionais no exercício de sua profissão. Palavras-chave: Acidente de trabalho. Materiais biológicos. Materiais perfurocortantes.

The truth lies within: the reconstructive value of inner livores in a homicide case.

Through the widespread use of postmortem computed tomography, inner livores of the lungs have become a frequently observed phenomenon in the field of forensic medicine. Yet their time-dependent development, notably in comparison with the widely studied external livores, remains poorly understood. We present a unique homicide case where the victim was discovered in supine position with correspondent external livores fixed exclusively on the rear side. Yet upon postmortem computed tomography, the victim presented pronounced inner livores within the depending dorsal areas of both lungs but also vertical sedimentation levels solely within the right lung, suggesting an initial right-hand side position and a postmortem re-positioning of the body. Interestingly, this was consistent with tangible hints of postmortem manipulation on-site. It is likely that this repositioning occurred sometime during the early postmortem interval (<6 h) as the external livores have completely rearranged to the final supine position. The presented case suggests different development patterns of inner and outer livores, highlighting the necessity for controlled studies that explore the formation and fixation processes of livor mortis in internal organs. A better understanding of these issues can prove useful in forensic examinations.

Physical properties of sediment core AND-2A

Whole-core measurements of Wet Bulk Density (WBD), compressional (P)-wave velocity (Vp), and Magnetic Susceptibility were measured at a sampling interval of 1 or 2 centimetres (cm) throughout the AND-2A drill core for initial core characterisation and on-site correlation with seismic modeling to predict target-reflector depth. Measurements were made using a GEOTEK (Multi-Sensor-Core-Logger MSCL). Density and velocity standards were measured together with core runs of 3-6 metres (m) (and occasionally up to 18 m) throughout the entire depth range to monitor data quality. Drift of the magnetic susceptibility sensor was also monitored and corrected where necessary. These physical properties show a large range of values, reflecting the different nature of the various lithologies including extremely high velocity and density values in individual clasts, and the effects of cementation on porosity. A downcore increase in WBD and Vp occurs in the upper 200 m, however, no systematic trend exists at greater depths although large fluctuations on a m-decimetre- (dm) scale occur. Magnetic susceptibility is generally low (<100 x 10-5 SI), however, four intervals of high (>600 x 10-5 SI) susceptibility occur at 560, 800, 980 and 1 080 mbsf, indicating a relatively greater contribution of volcanic-derived material to the core site in the lower half of the AND-2A core.