Will the new CB1 cannabinoid receptor antagonist SR-147778 have advantages over rimonabant?

Obesity and alcoholism are two common modern-day diseases. The cannabinoid CB, receptor antagonist rimonabant is in Phase III clinical trial for the treatment of obesity with preliminary results showing that it decreases appetite and body weight. Animal studies have shown that rimonabant is effective in the treatment of alcoholism. SR-147778 is a new potent and selective CB1 receptor antagonist. In animals, SR-147778 has been shown to inhibit CB1 receptor-mediated hypothermia, analgesia and slowing of gastrointestinal transit. In rats trained to drink sucrose, the oral administration of SR-147778 3 mg/kg, before the presentation of sucrose, decreased the consumption of sucrose. SR-147778 3 mg/kg also reduced spontaneous feeding in rats deprived of food and also in non-deprived rats. In Sardinian alcohol-preferring (sP) rats, in the alcohol-naive state, SR-147778 slowed the development of a preference for alcohol. in alcohol-experienced sP rats SR-147778 (2.5, 5 and 10 mg/kg p.o.) reduced the alcohol intake. When alcohol-experienced sP rats are deprived of alcohol for 15 days, there is a large intake of alcohol on reintroduction of alcohol, and this response was almost abolished by treatment with SR-147778. From the preclinical studies published to date, there is no obvious major point of difference between rimonabant and SR-147778, and both are promising agents for the treatment of obesity and alcoholism.

The cross-entropy method for network reliability estimation

Consider a network of unreliable links, modelling for example a communication network. Estimating the reliability of the network-expressed as the probability that certain nodes in the network are connected-is a computationally difficult task. In this paper we study how the Cross-Entropy method can be used to obtain more efficient network reliability estimation procedures. Three techniques of estimation are considered: Crude Monte Carlo and the more sophisticated Permutation Monte Carlo and Merge Process. We show that the Cross-Entropy method yields a speed-up over all three techniques.

Public opinion of a proposed wind farm situated close to a populated area in New Zealand: Results from a cross-sectional study

In accordance with New Zealand’s Resource Management Act 1991, in 2003, electricity generating company Genesis Energy made public its intention to apply for consent to build the Awhitu wind farm. Several community groups claiming to represent the majority opposed this application and in September 2004 consent was declined. The aim was to investigate the attitudes of local community members to the proposed wind farm. A survey was mailed to 500 Franklin residents, systematically selected from the local 2004/2005 telephone directory. Forty questionnaires were returned undelivered. Of the remaining 460, completed questionnaires were returned from 46% (211). Most, 70% (145), residents supported a wind farm being built in their area, with 17% (35) neutral, and only 13% (28) against the farm. There was no statistical difference in respondents’ attitudes between sex, age, or residential proximity to the farm. Respondents listed renewable resource (83%), suitability (78%), and environmental friendliness (76%) as main advantages. Visual unsightliness (24%) and noise pollution (21%) were listed as main perceived disadvantages. Contrary to the assertions of several lobby groups, the majority of local residents support the construction of the Awhitu wind farm. Scientifically robust methods are essential to measure appropriately community attitudes, particularly on contentious issues.

Its in her eyes? A barometer for EU accession through female perceptions of role portrayals in advertising:a cross-cultural study of Ukraine and Turkey?

This article examines female response to gender role portrayals in advertising for Ukraine and Turkey. Being both new potential EU candidates, we argue that gender stereotype could also be used as a \u2018barometer\u2019 of progress and closure towards a more generally accepted EU behaviour against women. While their history remains different, both from a political and society values point of views, constraints are currently being faced that require convergence or justification of practices and understanding. Principal components analysis is employed over 290 questionnaires to identify the underlying dimensions. Results indicate overall similarities in perceptions, fragmentation within groups, but seem to provide divergence regarding thresholds.

Spatial and temporal dependencies of cross-orientation suppression in human vision.

A well-known property of orientation-tuned neurons in the visual cortex is that they are suppressed by the superposition of an orthogonal mask. This phenomenon has been explained in terms of physiological constraints (synaptic depression), engineering solutions for components with poor dynamic range (contrast normalization) and fundamental coding strategies for natural images (redundancy reduction). A common but often tacit assumption is that the suppressive process is equally potent at different spatial and temporal scales of analysis. To determine whether it is so, we measured psychophysical cross-orientation masking (XOM) functions for flickering horizontal Gabor stimuli over wide ranges of spatio-temporal frequency and contrast. We found that orthogonal masks raised contrast detection thresholds substantially at low spatial frequencies and high temporal frequencies (high speeds), and that small and unexpected levels of facilitation were evident elsewhere. The data were well fit by a functional model of contrast gain control, where (i) the weight of suppression increased with the ratio of temporal to spatial frequency and (ii) the weight of facilitatory modulation was the same for all conditions, but outcompeted by suppression at higher contrasts. These results (i) provide new constraints for models of primary visual cortex, (ii) associate XOM and facilitation with the transient magno- and sustained parvostreams, respectively, and (iii) reconcile earlier conflicting psychophysical reports on XOM.

The EU's 'transnational power over' Central Asia:Developing and applying a structurally integrative approach to the study of the EU's power over Central Asia

This thesis challenges the consensual scholarly expectation of low EU impact in Central Asia. In particular, it claims that by focusing predominantly on narrow, micro-level factors, the prevailing theoretical perspectives risk overlooking less obvious aspects of the EU?s power, including structural aspects, and thus tend to underestimate the EU?s leverage in the region. Therefore, the thesis argues that a more structurally integrative and holistic approach is needed to understand the EU?s power in the region. In responding to this need, the thesis introduces a conceptual tool, which it terms „transnational power over? (TNPO). Inspired by debates in IPE, in particular new realist and critical IPE perspectives, and combining these views with insights from neorealist, neo-institutionalist and constructivist approaches to EU external relations, the concept of TNPO is an analytically eclectic notion, which helps to assess the degree to which, in today?s globalised and interdependent world, the EU?s power over third countries derives from its control over a combination of material, institutional and ideational structures, making it difficult for the EU?s partners to resist the EU?s initiatives or to reject its offers. In order to trace and assess the mechanisms of EU impact across these three structures, the thesis constructs a toolbox, which centres on four analytical distinctions: (i) EU-driven versus domestically driven mechanisms, (ii) mechanisms based on rationalist logics of action versus mechanisms following constructivist logics of action, (iii) agent-based versus purely structural mechanisms of TNPO, and (iv) transnational and intergovernmental mechanisms of EU impact. Using qualitative research methodology, the thesis then applies the conceptual model to the case of EU-Central Asia. It finds that the EU?s power over Central Asia effectively derives from its control over a combination of material, institutional and ideational structures, including its position as a leader in trade and investment in the region, its (geo)strategic and security-related capabilities vis-à-vis Central Asia, as well as the relatively dense level of institutionalisation of its relations with the five countries and the positive image of the EU in Central Asia as a more neutral actor.

Investigation of the oxidative degradation mechanisms and melt stabilisation of a new generation metallocene polytehylene

The two main objectives of the research work conducted were firstly, to investigate the processing and rheological characteristics of a new generation metallocene catalysed linear low density polyethylene (m-LLDPE), in order to establish the thermal oxidative degradation mechanism, and secondly, to examine the role of selected commercial stabilisers on the melt stability of the polymers. The unstabilised m-LLDPE polymer was extruded (pass I) using a twin screw extruder, at different temperatures (210-285°C) and screw speeds (50-20rpm) and was subjected to multiple extrusions (passes, 2-5) carried out under the same processing conditions used in the first pass. A traditional Ziegler/Natta catalysed linear low density polyethylene (z-LLDPE) produced by the same manufacturer was also subjected to a similar processing regime in order to compare the processability and the oxidative degradation mechanism (s) of the new m-LLDPE with that of the more traditional z-LLDPE. The effect of some of the main extrusion characteristics of the polymers (m-LLDPE and z-LLDPE) on their melt rheological behaviour was investigated by examining their melt flow performance monitored at two fixed low shear rate values, and their rheological behaviour investigated over the entire shear rates experienced during extrusion using a twin-bore capillary rheometer. Capillary rheometric measurements, which determine the viscous and elastic properties of polymers, have shown that both polymers are shear thinning but the m-LLDPE has a higher viscosity than z-LLDPE and the extent of reduction in viscosity of the former when the extrusion temperature was increased from 210°C to 285°C was much higher than in the case of the z-LLDPE polymer. This was supplied by the findings that the m-LLDPE polymer required higher power consumption under all extrusion conditions examined. It was fUliher revealed that the m-LLDPE undergoes a higher extent of melt fracture, the onset of which occurs under much lower shear rates than the Ziegler-based polymer and this was attributed to its higher shear viscosity and narrower molecular weight distribution (MWD). Melt flow measurements and GPC have shown that after the first extrusion pass, the initial narrower MWD of m-LLDPE is retained (compared to z-LLDPE), but upon further multiple extrusion passes it undergoes much faster broadening of its MWD which shifts to higher Mw polymer fractions, paliicularly at the high screw speeds. The MWD of z-LLDPE polymer on the other hand shifts towards the lower Mw end. All the evidence suggest therefore the m-LLDPE undergoes predominantly cross-linking reactions under all processing conditions whereas z-LLDPE undergoes both cross-linking and chain scission reactions with the latter occurring predominantly under more severe processing conditions (higher temperatures and screw speeds, 285°CI200rpm). The stabilisation of both polymers with synergistic combinations of a hindered phenol (Irganox 1076) and a phosphite (Weston 399) at low concentrations has shown a high extent of melt stabilisation in both polymers (extrusion temperatures 210-285°C and screw speeds 50-200rpm). The best Irganox 1076/Weston 399 system was found to be at an optimum 1:4 w/w ratio, respectively and was found to be most effective in the z-LLDPE polymer. The melt stabilising effectiveness of a Vitamin E/Ultranox 626 system used at a fraction of the total concentration of Irganox 1076/Weston 399 system was found to be higher in both polymers (under all extrusion conditions). It was found that AOs which operate primarily as alkyl (Re) radical scavengers are the most effective in inhibiting the thermal oxidative degradation of m-LLDPE in the melt; this polymer was shown to degrade in the melt primarily via alky radicals resulting in crosslinking. Metallocene polymers stabilised with single antioxidants of Irganox HP 136 (a lactone) and Irganox E201 (vitamin E) produced the highest extent of melt stability and the least discolouration during processing (260°C/1 OOrpm). Furthermore, synergistic combinations of Irganox HP I 36/Ultranox 626 (XP-60) system produced very high levels of melt and colour stability (comparable to the Vitamin E based systems) in the mLLDPE polymer. The addition of Irganox 1076 to an Irganox HP 136/Ultranox 626 system was found not to result in increasing melt stability but gave rise to increasing discolouration of the m-LLDPE polymer. The blending of a hydroxylamine (lrgastab FS042) with a lactone and Vitamin E (in combination with a phosphite) did not increase melt stability but induced severe discolouration of resultant polymer samples.

Leisure at work in Britain, West Germany, France and Japan : a cross-cultural comparative study

The aim of this thesis was to investigate the impact of changing values and attitudes toward work and the workplace in Britain, West Germany, France and Japan. A cross-national approach was adopted in order to gain a better understanding of differences and similarities in behaviour and to identify aspects specific to each society. Although the relationship between work and leisure has been thoroughly examined and there is a growing body of literature on changes in the values associated with these two phenomena, little research has been carried out into leisure at work. Studies of work time have tended to consider it as a homogeneous block, whereas recent research suggests that more attention should be devoted to unravelling the multiple uses of time at the workplace. The present study sought to review and analyse this new approach to the study of work time, and special attention is devoted to an examination of definitions of leisure, recreation, free time and work within the context of the workplace. The cross-cultural comparative approach gave rise to several problems due to the number of countries involved and the unusual combination of factors being investigated. The main difficulties were differences in the amount and quality of literature available, the non-comparability of existing data, definitions of concepts and socio-linguistic terms, and problems over access to organizations for fieldwork. Much of the literature generalizes about patterns of behaviour and few authors isolate factors specific to particular societies. In this thesis new empirical work is therefore used to ascertain the extent to which generalizations can be made from the literature and characteristics peculiar to each of the four countries identified. White-collar employees in large, broadly comparable companies were studied using identical questionnaires in the appropriate language. Respondents selected were men and women, aged between 20-65 years and either managers or non-managers. Patterns of leisure at work were found to be broadly similar in the national contexts, but with the Japanese and the West Germans experiencing the least leisure at work, and the British and the French perceiving the most. The general trend seems to be toward convergence of attitudes regarding leisure at work in the four countries. Explanations for variations in practice were sought within the wider societal contexts of each country.

A study of new product market search and user adoption

The research was carried out in the Aviation Division of Dunlop Limited and was initiated as a search for more diverse uses for carbon/carbon composites. An assumed communication model of adoption was refined by introducing the concept of a two way search after making cross industry comparisons of supplier and consumer behaviour. This research has examined methods of searching for new uses for advanced technology materials. Two broad approaches were adopted. First, a case history approach investigated materials that had been in a similar oosition to carbon/carbon to see how other material producing firms had tackled the problem. Second, a questionnaire survey among industrialists examined: the role and identity of material decision makers in different sized firms; the effectiveness of various information sources and channels; and the material adoption habits of different industries. The effectiveness of selected information channels was further studied by monitoring the response to publicity given to carbon/carbon. A flow chart has been developed from the results of this research which should help any material producing firm that is contemplating the introduction of a new material to the world market. Further benefit to our understanding of the innovation and adoption of new materials would accrue from work in the followino areas: "micro" type case histories; understanding more fully the role of product champions or promoters; investigating the phase difference between incremental and radical type innovations for materials; examining the relationship between the adoption rate of new materials and the advance of technology; studying the development of cost per unit function methods for material selection; and reviewing the benefits that economy of scale studies can have on material developments. These are all suggested areas for further work.

Enhancing enterprise knowledge processes via cross-media extraction

In large organizations the resources needed to solve challenging problems are typically dispersed over systems within and beyond the organization, and also in different media. However, there is still the need, in knowledge environments, for extraction methods able to combine evidence for a fact from across different media. In many cases the whole is more than the sum of its parts: only when considering the different media simultaneously can enough evidence be obtained to derive facts otherwise inaccessible to the knowledge worker via traditional methods that work on each single medium separately. In this paper, we present a cross-media knowledge extraction framework specifically designed to handle large volumes of documents composed of three types of media text, images and raw data and to exploit the evidence across the media. Our goal is to improve the quality and depth of automatically extracted knowledge.

Moving on from nascent entrepreneurship:measuring cross-national differences in the transition to new business ownership

Nascent entrepreneurship and new business ownership are subsequent stages in the entrepreneurial process. We illustrate how information from the largest internationally harmonized database on entrepreneurship, the Global Entrepreneurship Monitor project, can be used to approximate the entrepreneurial process. We make a methodological contribution by computing the ratio of new business ownership to nascent entrepreneurship in a way that reflects the transition from nascent to new business ownership and provides cross-nationally comparable information on the efficiency of the entrepreneurial process for 48 countries. We report evidence for the validity of the transition ratio by benchmarking it against transition rates obtained from longitudinal studies and by correlating it with commonly used entrepreneurship indicators and macro-level economic indices. The transition ratio enables future cross-national research on the entrepreneurial process by providing a reliable and valid indicator for one key transition in this process. © 2012 Springer Science+Business Media New York.

Random distributed feedback fibre lasers

The concept of random lasers exploiting multiple scattering of photons in an amplifying disordered medium in order to generate coherent light without a traditional laser resonator has attracted a great deal of attention in recent years. This research area lies at the interface of the fundamental theory of disordered systems and laser science. The idea was originally proposed in the context of astrophysics in the 1960s by V.S. Letokhov, who studied scattering with "negative absorption" of the interstellar molecular clouds. Research on random lasers has since developed into a mature experimental and theoretical field. A simple design of such lasers would be promising for potential applications. However, in traditional random lasers the properties of the output radiation are typically characterized by complex features in the spatial, spectral and time domains, making them less attractive than standard laser systems in terms of practical applications. Recently, an interesting and novel type of one-dimensional random laser that operates in a conventional telecommunication fibre without any pre-designed resonator mirrors-random distributed feedback fibre laser-was demonstrated. The positive feedback required for laser generation in random fibre lasers is provided by the Rayleigh scattering from the inhomogeneities of the refractive index that are naturally present in silica glass. In the proposed laser concept, the randomly backscattered light is amplified through the Raman effect, providing distributed gain over distances up to 100km. Although an effective reflection due to the Rayleigh scattering is extremely small (~0.1%), the lasing threshold may be exceeded when a sufficiently large distributed Raman gain is provided. Such a random distributed feedback fibre laser has a number of interesting and attractive features. The fibre waveguide geometry provides transverse confinement, and effectively one-dimensional random distributed feedback leads to the generation of a stationary near-Gaussian beam with a narrow spectrum. A random distributed feedback fibre laser has efficiency and performance that are comparable to and even exceed those of similar conventional fibre lasers. The key features of the generated radiation of random distributed feedback fibre lasers include: a stationary narrow-band continuous modeless spectrum that is free of mode competition, nonlinear power broadening, and an output beam with a Gaussian profile in the fundamental transverse mode (generated both in single mode and multi-mode fibres).This review presents the current status of research in the field of random fibre lasers and shows their potential and perspectives. We start with an introductory overview of conventional distributed feedback lasers and traditional random lasers to set the stage for discussion of random fibre lasers. We then present a theoretical analysis and experimental studies of various random fibre laser configurations, including widely tunable, multi-wavelength, narrow-band generation, and random fibre lasers operating in different spectral bands in the 1-1.6μm range. Then we discuss existing and future applications of random fibre lasers, including telecommunication and distributed long reach sensor systems. A theoretical description of random lasers is very challenging and is strongly linked with the theory of disordered systems and kinetic theory. We outline two key models governing the generation of random fibre lasers: the average power balance model and the nonlinear Schrödinger equation based model. Recently invented random distributed feedback fibre lasers represent a new and exciting field of research that brings together such diverse areas of science as laser physics, the theory of disordered systems, fibre optics and nonlinear science. Stable random generation in optical fibre opens up new possibilities for research on wave transport and localization in disordered media. We hope that this review will provide background information for research in various fields and will stimulate cross-disciplinary collaborations on random fibre lasers. © 2014 Elsevier B.V.

Good and bad institutions:is the debate over? Cross-country firm-level evidence from the textile industry

Using firm-level data from nine developing countries, we demonstrate that certain institutions, like restrictive labour market regulations, that are considered bad for economic growth might be beneficial for production efficiency, whereas good business environment, which is considered beneficial for economic growth, might have an adverse impact on production efficiency. We argue that our results suggest that there might be significant difference in the macro- and micro-impacts of institutional quality, such that the classification of institutions into 'good' and 'bad might be premature. © The Author 2013. Published by Oxford University Press on behalf of the Cambridge Political Economy Society. All rights reserved.

Enabling transparent technologies for the development of highly granular flexible optical cross-connects

Flexible optical networking is identified today as the solution that offers smooth system upgradability towards Tb/s capacities and optimized use of network resources. However, in order to fully exploit the potentials of flexible spectrum allocation and networking, the development of a flexible switching node is required capable to adaptively add, drop and switch tributaries with variable bandwidth characteristics from/to ultra-high capacity wavelength channels at the lowest switching granularity. This paper presents the main concept and technology solutions envisioned by the EU funded project FOX-C, which targets the design, development and evaluation of the first functional system prototype of flexible add-drop and switching cross-connects. The key developments enable ultra-fine switching granularity at the optical subcarrier level, providing end-to-end routing of any tributary channel with flexible bandwidth down to 10Gb/s (or even lower) carried over wavelength superchannels, each with an aggregated capacity beyond 1Tb/s. © 2014 IEEE.