Control and Dynamics of Fractional Order Systems

Fractional Calculus (FC) goes back to the beginning of the theory of differential calculus. Nevertheless, the application of FC just emerged in the last two decades due to the progress in the area of nonlinear dynamics. This article discusses several applications of fractional calculus in science and engineering, namely: the control of heat systems, the tuning of PID controllers based on fractional calculus concepts and the dynamics in hexapod locomotion.

Fractional Dynamics and Control of Distributed Parameter Systems

Fractional Calculus (FC) goes back to the beginning of the theory of differential calculus. Nevertheless, the application of FC just emerged in the last two decades, due to the progress in the area of chaos that revealed subtle relationships with the FC concepts. In the field of dynamical systems theory some work has been carried out but the proposed models and algorithms are still in a preliminary stage of establishment. Having these ideas in mind, the paper discusses a FC perspective in the study of the dynamics and control of some distributed parameter systems.

Improved Numerical Simulation for a Novel Adaptive Control Using Fractional Order Derivatives

A novel control technique is investigated in the adaptive control of a typical paradigm, an approximately and partially modeled cart plus double pendulum system. In contrast to the traditional approaches that try to build up ”complete” and ”permanent” system models it develops ”temporal” and ”partial” ones that are valid only in the actual dynamic environment of the system, that is only within some ”spatio-temporal vicinity” of the actual observations. This technique was investigated for various physical systems via ”preliminary” simulations integrating by the simplest 1st order finite element approach for the time domain. In 2004 INRIA issued its SCILAB 3.0 and its improved numerical simulation tool ”Scicos” making it possible to generate ”professional”, ”convenient”, and accurate simulations. The basic principles of the adaptive control, the typical tools available in Scicos, and others developed by the authors, as well as the improved simulation results and conclusions are presented in the contribution.

Modelling and Control of Freeway Traffic

This paper presents the most recent developments of the Simulator of Intelligent Transportation Systems (SITS). The SITS is based on a microscopic simulation approach to reproduce real traffic conditions in an urban or non-urban network. In order to analyse the quality of the microscopic traffic simulator SITS a benchmark test was performed. A dynamical analysis of several traffic phenomena, applying a new modelling formalism based on the embedding of statistics and Laplace transform, is then addressed. The paper presents also a new traffic control concept applied to a freeway traffic system.

Cascade Control of a Hexapod Robot

6th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Catania, Italy, 17-19 September

System Modeling and Control Through Fractional-Order Algorithms

The theory of fractional calculus goes back to the beginning of thr throry of differential calculus but its inherent complexity postponed the applications of the associated concepts. In the last decade the progress in the areas of chaos and fractals revealed subtle relationships with the fractional calculus leading to an increasing interest in the development of the new paradigm. In the area of automaticcontrol preliminary work has already been carried out but the proposed algorithms are restricted to the frequency domain. The paper discusses the design of fractional-order discrete-time controllers. The algorithms studied adopt the time domein, which makes them suited for z-transform analusis and discrete-time implementation. The performance of discrete-time fractional-order controllers with linear and non-linear systems is also investigated.

Chaotic Phenomena and Performance Optimization in the Trajectory Control of Redundant Manipulators

Redundant manipulators have some advantages when compared with classical arms because they allow the trajectory optimization, both on the free space and on the presence of abstacles, and the resolution of singularities. For this type of manipulators, several kinetic algorithms adopt generalized inverse matrices. In this line of thought, the generalized inverse control scheme is tested through several experiments that reveal the difficulties that often arise. Motivated by theseproblems this paper presents a new method that ptimizes the manipulability through a least squre polynomialapproximation to determine the joints positions. Moreover, the article studies influence on the dynamics, when controlling redundant and hyper-redundant manipulators. The experiment confirm the superior performance of the proposed algorithm for redundant and hyper-redundant manipulators, revealing several fundamental properties of the chaotic phenomena, and gives a deeper insight towards the future development of superior trajectory control algorithms.

Neural control of an autonomous robot

This article aims to apply the concepts associated with artificial neural networks (ANN) in the control of an autonomous robot system that is intended to be used in competitions of robots. The robot was tested in several arbitrary paths in order to verify its effectiveness. The results show that the robot performed the tasks with success. Moreover, in the case of arbitrary paths the ANN control outperforms other methodologies, such as fuzzy logic control (FLC).

Formation Control Driven by Cooperative Object Tracking

In this paper we introduce a formation control loop that maximizes the performance of the cooperative perception of a tracked target by a team of mobile robots, while maintaining the team in formation, with a dynamically adjustable geometry which is a function of the quality of the target perception by the team. In the formation control loop, the controller module is a distributed non-linear model predictive controller and the estimator module fuses local estimates of the target state, obtained by a particle filter at each robot. The two modules and their integration are described in detail, including a real-time database associated to a wireless communication protocol that facilitates the exchange of state data while reducing collisions among team members. Simulation and real robot results for indoor and outdoor teams of different robots are presented. The results highlight how our method successfully enables a team of homogeneous robots to minimize the total uncertainty of the tracked target cooperative estimate while complying with performance criteria such as keeping a pre-set distance between the teammates and the target, avoiding collisions with teammates and/or surrounding obstacles.

Visceral leishmaniasis in Brazil: revisiting paradigms of epidemiology and control

In the last 20 years, despite the known underestimation of cases, Brazil registered a marked increase in the incidence of visceral leishmaniasis. The main goal of this review is to reflect on some aspects of this zoonosis in Brazil and also to encourage the discussion in order to find more viable, effective and affordable strategies to be implemented by the Brazilian Leishmaniasis Control Program. The current situation of visceral leishmaniasis in Brazil might be seen as a paradox: the most important aspects of the disease are known, but so far the control of this disease has not yet been achieved. The current control strategies have not been able to prevent the geographical expansion, and even a rise in the incidence and lethality of visceral leishmaniasis. There is a need not only for a better definition of priority areas, but also for the implementation of a fieldwork monitoring system to the disease surveillance that could permit a further evaluation of the control program in areas where visceral leishmaniasis is endemic.

Mass treatment for intestinal helminthisis control in an Amazonian endemic area in Brazil

The objective of the present study was to estimate the prevalence of soil-transmitted helminthiasis and evaluate the sanitary conditions and the role of a mass treatment campaign for control of these infections in Santa Isabel do Rio Negro. A cross-sectional survey was carried out in 2002, to obtain data related to the sanitary conditions of the population and fecal samples for parasitological examination in 308 individuals, followed by a mass treatment with albendazole or mebendazole with coverage of 83% of the city population in 2003. A new survey was carried out in 2004, involving 214 individuals, for comparison of the prevalences of intestinal parasitosis before and after the mass treatment. The prevalences of ascariasis, trichuriasis and hookworm infection were 48%; 27% and 21% respectively in 2002. There was a significant decrease for the frequency of infections by Ascaris lumbricoides (p < 0.05; OR / 95% CI = 0.44 / 0.30 - 0.65), Trichuris trichiura (p < 0.05; OR / 95% CI = 0.37 / 0.22 - 0.62), hookworm (p < 0.05; OR / 95% CI = 0.03 / 0.01 - 0.15) and helminth poliparasitism (p < 0.05; OR / 95% CI = 0.16 / 0.08 - 0.32). It was also noticed a decrease of prevalence of infection by Entamoeba histolytica / dispar (p < 0.05; OR / 95% CI = 0.30 / 0.19 - 0.49) and non-pathogenic amoebas. It was inferred that a mass treatment can contribute to the control of soil-transmitted helminthiasis as a practicable short-dated measure. However, governmental plans for public health, education and urban infrastructure are essential for the sustained reduction of prevalences of those infections.

Pré-fabricação em betão armado – Uma abordagem sobre a indústria e seus processos

O presente relatório resulta do estágio que decorreu na empresa TELHABEL, em Vila Nova de Famalicão e insere-se na unidade curricular Dissertação, Projeto e Estágio (DIPRE) do 2º semestre do 2º ano do curso de Mestrado em Engenharia Civil no ramo de construções no Instituto Superior de Engenharia do Porto. Durante o período de estágio foi possível adquirir uma visão abrangente da pré-fabricação em betão armado e pré-esforçado, que incluiu todas as áreas envolvidas no processo: atividades prévias, organização fabril, processo industrial, produção, transporte e montagem. Foi estabelecido um programa de trabalhos que envolveu a pesquisa de elementos bibliográficos sobre pré-fabricação, e o contacto com o dia-a-dia de uma empresa industrial. Foram estudadas várias tecnologias fabris de produção de elementos pré-fabricados, tentando perceber as suas vantagens, campos de aplicação e condicionantes de utilização. Analisou-se o trabalho fabril incidindo na organização e sequência de atividades, desde a realização de armaduras, cofragens, betonagem, controlo de qualidade até à armazenagem de produto acabado. Com complemento da atividade fabril fez-se uma breve referência ao transporte e montagem do material e a sua íntima relação com a produção. Uma vez que, em Portugal, a pré-fabricação se encontra numa fase de escassa atividade, procurou-se simular um caso real que permitisse ao formando o estudo de um projeto fictício, mas perfeitamente realizável. Concebeu-se a estrutura pré-fabricada para construir um armazém, da qual se fez a medição, orçamentação e elaboração dos desenhos de cofragem para fabrico. Posteriormente estudou-se também a produção da ponte sobre o rio Giraul, que se encontra, presentemente, em produção pela empresa, em Angola. Neste estudo procurou-se perceber as questões envolvidas nas cofragens e armaduras, tendo sido estudada a preparação destas últimas, de modo a alertar o formando para os problemas envolvidos na sua execução. A análise aos projetos propostos permitiu compreender a responsabilidade e complexidade das tarefas envolvidas na produção de pré-fabricados.

Desenvolvimento de Aplicação para a Otimização de Processo Produtivo

Empreendimentos industriais requerem o acompanhamento completo e preciso de dados de máquinas em tempo real, integrando as atividades do chão de fábrica com a engenharia, suporte e negócios. É reconhecido que sistemas de monitorização são fundamentais para melhorar a qualidade do produto, reduzir os tempos e para a adaptação rápida às mudanças de produção. Os sensores de processos possuem custos altos, não são compactos e são de difícil implementação. Portanto, seria estratégico desenvolver sistemas de monitorização que usufruem ao máximo dos recursos já existentes nas máquinas e ferramentas e que não representem custos adicionais elevados e de difícil implementação. O uso de PLC nas indústrias é crescente. Estes mostram-se como ferramentas potenciais para atender a estas exigências. Os PLC possuem os recursos necessários para a aquisição de informações e controlo das máquinas, facilitando a interação com um sistema SCADA. O objetivo do presente trabalho é pesquisar soluções sobre sistemas de monitorização que possam substituir um sistema instalado antiquado e encontrar uma solução para o controlo de um processo de vazamento. Para tal, foram consideradas duas soluções: uma passaria por desenvolver um sistema de monitorização que controlasse o processo de vazamento, e outra que permitisse ser o PLC a fazer o controlo, adquirindo um HMI apenas para monitorização. Esta última solução revelou-se como a melhor, visto que um PLC tem mais durabilidade em relação a um PC, em termos de atualizações de hardware e software. Assim, foram criadas funções no PLC para fazer o controlo de vazamento e foi adquirido uma consola Beijer, e respetivo software de programação SCADA, para a criação do sistema de monitorização. Os resultados mostram que o PLC é capaz de executar o controlo, não sendo necessário investir em PC que são mais caros, bastando para isso adquirir sistemas SCADA simples e capazes.

Successful control program to implement the appropriate antibiotic prophylaxis for cesarean section

OBJECTIVE: Describe implementation of a successful program to reduce doses (cefazolin 2 to 1 g) used for antimicrobial prophylaxis. METHODS: Evaluation of an intervention program to reduce prophylactic antimicrobial doses. The intervention included weekly staff discussions, automatic dispensation of 1g-vial of cefazolin by the pharmacy unless expressly requested by surgeon and increase in post-discharge surveillance as a strategy to reassure surgeons of the safety of the reduction. In the pre and post intervention periods, a prospective study of antimicrobial consumption and surgical site infections were measured. RESULTS: There were 5,164 and 5,204 deliveries in 2001-2002 and 2003-2004, respectively; 1,524 (29.5%) and 1,363 (26%) were cesarean sections. There was a 45% decrease in cefazolin vials used on average per cesarean section (2.29 to 1.25). Patients evaluated increased from 16% to 67% and the SSI rates in both periods were 3.34% to 2.42%, respectively. CONCLUSION: An ample intervention, including administrative and educational measures, led to high compliance with dose reduction and saved more than US$4,000 in cefazolin, considered important because government reimbursement in Brazil for cesarean section is $80.

Potential of biologically active plant oils to control mosquito larvae (Culex pipiens, Diptera: Culicidae) from an egyptian locality

The insecticidal effect of six commercially available plant oils was tested against 4th larval instars of Culex pipiens. Larvae were originally collected from Meit El-Attar, Qalyubia Governorate, Egypt, and then reared in the laboratory until F1 generation. The LC50 values were 32.42, 47.17, 71.37, 83.36, 86.06, and 152.94 ppm for fenugreek (Trigonella foenum-grecum), earth almond (Cyperus esculentus), mustard (Brassica compestris), olibanum (Boswellia serrata), rocket (Eruca sativa), and parsley (Carum ptroselinum), respectively. The tested oils altered some biological aspects of C. pipiens, for instance, developmental periods, pupation rates, and adult emergences. The lowest concentrations of olibanum and fenugreek oils caused remarkable prolongation of larval and pupal durations. Data also showed that the increase of concentrations was directly proportional to reduction in pupation rates and adult emergences. Remarkable decrease in pupation rate was achieved by mustard oil at 1000 ppm. Adult emergence was suppressed by earth almond and fenugreek oils at 25 ppm. In addition, the tested plant oils exhibited various morphological abnormalities on larvae, pupae, and adult stages. Consequently, fenugreek was the most potent oil and the major cause of malformation of both larval and pupal stages. Potency of the applied plant oils provided an excellent potential for controlling C. pipiens.