Urinary naphthalene and phenanthrene as biomarkers of occupational exposure to polycyclic aromatic hydrocarbons.

OBJECTIVES: The study investigated the utility of unmetabolised naphthalene (Nap) and phenanthrene (Phe) in urine as surrogates for exposures to mixtures of polycyclic aromatic hydrocarbons (PAHs). METHODS: The report included workers exposed to diesel exhausts (low PAH exposure level, n = 39) as well as those exposed to emissions from asphalt (medium PAH exposure level, n = 26) and coke ovens (high PAH exposure level, n = 28). Levels of Nap and Phe were measured in urine from each subject using head space-solid phase microextraction and gas chromatography-mass spectrometry. Published levels of airborne Nap, Phe and other PAHs in the coke-producing and aluminium industries were also investigated. RESULTS: In post-shift urine, the highest estimated geometric mean concentrations of Nap and Phe were observed in coke-oven workers (Nap: 2490 ng/l; Phe: 975 ng/l), followed by asphalt workers (Nap: 71.5 ng/l; Phe: 54.3 ng/l), and by diesel-exposed workers (Nap: 17.7 ng/l; Phe: 3.60 ng/l). After subtracting logged background levels of Nap and Phe from the logged post-shift levels of these PAHs in urine, the resulting values (referred to as ln(adjNap) and ln(adjPhe), respectively) were significantly correlated in each group of workers (0.71 < or = Pearson r < or = 0.89), suggesting a common exposure source in each case. Surprisingly, multiple linear regression analysis of ln(adjNap) on ln(adjPhe) showed no significant effect of the source of exposure (coke ovens, asphalt and diesel exhaust) and further suggested that the ratio of urinary Nap/Phe (in natural scale) decreased with increasing exposure levels. These results were corroborated with published data for airborne Nap and Phe in the coke-producing and aluminium industries. The published air measurements also indicated that Nap and Phe levels were proportional to the levels of all combined PAHs in those industries. CONCLUSION: Levels of Nap and Phe in urine reflect airborne exposures to these compounds and are promising surrogates for occupational exposures to PAH mixtures.

Small angle scattering characterisation of micellar systems and templated architectures

The work described in this thesis reports the structural changes induced on micelles under a variety of conditions. The micelles of a liquid crystal film and dilute solutions of micelles were subjected to high pressure CO2 and selected hydrocarbon environments. Using small angle neutron scattering (SANS) techniques the spacing between liquid crystal micelles was measured in-situ. The liquid crystals studied were templated from different surfactants with varying structural characteristics. Micelles of a dilute surfactant solution were also subjected to elevated pressures of varying gas atmospheres. Detailed modelling of the in-situ SANS experiments revealed information of the size and shape of the micelles at a number of different pressures. Also reported in this thesis is the characterisation of mesoporous materials in the confined channels of larger porous materials. Periodic mesoporous organosilicas (PMOs) were synthesised within the channels of anodic alumina membranes (AAM) under different conditions, including drying rates and precursor concentrations. In-situ small angle x-ray scattering (SAXS) and transmission electron microscopy (TEM) was used to determine the pore morphology of the PMO within the AAM channels. PMO materials were also used as templates in the deposition of gold nanoparticles and subsequently used in the synthesis of germanium nanostructures. Polymer thin films were also employed as templates for the directed deposition of gold nanoparticles which were again used as seeds for the production of germanium nanostructures. A supercritical CO2 (sc-CO2) technique was successfully used during the production of the germanium nanostructures.

The Ford administration, Angola and the perception of Post-Vietnam US credibility, 1974-1976

This thesis is a study of how the Gerald Ford administration struggled to address a perceived loss of US credibility after the collapse of Vietnam, with a focus on the role of Secretary of State Henry Kissinger in the formulation, implementation and subsequent defence of US Angolan policy. By examining the immediate post-Vietnam period, this thesis shows that Vietnam had a significant impact on Kissinger’s actions on Angola, which resulted in an ill conceived covert operation in another third world conflict. In 1974, Africa was a neglected region in Cold War US foreign policy, yet the effects of the Portuguese revolution led to a rapid decolonization of its African territories, of which Angola was to become the focus of superpower competition. After South Vietnam collapsed in April 1975, Kissinger became fixated on restoring the perceived loss of US prestige, Angola provided the first opportunity to address this. Despite objections from his advisors, Kissinger methodically engineered a covert program to assist two anti-Marxist guerrilla groups in Angola. As the crisis escalated, the media discovered the operation and the Congress decided to cease all funding. A period of heated tensions ensued, resulting in Kissinger creating a new African policy to outmanoeuvre his critics publicly, while privately castigating them to foreign leaders. This thesis argues that Kissinger’s dismissal of internal dissent and opposition from the Congress was influenced by what he perceived as bureaucrats being affected by the Vietnam syndrome, and his obsession with restoring US credibility. By looking at the private and public records – as expressed in government meetings and official reports, US newspaper and television coverage and diplomatic cables – this thesis addresses the question of how the lessons of Vietnam failed to influence Kissinger’s actions in Angola, but the lessons of Angola were heavily influential in the construction of a new US-African policy.

Magnetophoretic circuits for digital control of single particles and cells.

The ability to manipulate small fluid droplets, colloidal particles and single cells with the precision and parallelization of modern-day computer hardware has profound applications for biochemical detection, gene sequencing, chemical synthesis and highly parallel analysis of single cells. Drawing inspiration from general circuit theory and magnetic bubble technology, here we demonstrate a class of integrated circuits for executing sequential and parallel, timed operations on an ensemble of single particles and cells. The integrated circuits are constructed from lithographically defined, overlaid patterns of magnetic film and current lines. The magnetic patterns passively control particles similar to electrical conductors, diodes and capacitors. The current lines actively switch particles between different tracks similar to gated electrical transistors. When combined into arrays and driven by a rotating magnetic field clock, these integrated circuits have general multiplexing properties and enable the precise control of magnetizable objects.

NAFTA and the apparel commodity chain: Corporate strategies, interfirm networks, and industrial upgrading

The apparel industry is one of the oldest and largest export industries in the world, with global trade and production networks that connect firms and workers in countries at all levels of economic development. This chapter examines the impact of the North American Free Trade Agreement (NAFTA) as one of the most recent and significant developments to affect patterns of international trade and production in the apparel and textile industries. Tr ade policies are changing the institutional environment in which firms in this industry operate, and companies are responding to these changes with new strategies designed to increase their profitability and strengthen their control over the apparel commodity chain. Our hypothesis is that lead firms are establishing qualitatively different kinds of regional production networks in North America from those that existed prior to NAFTA, and that these networks have important consequences for industrial upgrading in the Mexican textile and apparel industries. Post-NAFTA crossborder production arrangements include full-package networks that link lead firms in the United States with apparel and textile manufacturers, contractors, and suppliers in Mexico. Full-package production is increasing the local value added provided by the apparel commodity chain in Mexico and creating new opportunities for Mexican firms and workers. The chapter is divided into four main sections. The first section uses trade and production data to analyze shifts in global apparel flows, highlighting the emergence and consolidation of a regional trade bloc in North America. The second section discusses the process of industrial upgrading in the apparel industry and introduces a distinction between assembly and full-package production networks. The third section includes case studies based on published industry sources and strategic interviews with several lead companies whose strategies are largely responsible for the shifting trade patterns and NAFTA-inspired cross-border production networks discussed in the previous section. The fourth section considers the implications of these changes for employment in the North American apparel industry. © 2009 by Temple University Press. All rights reserved.

NAFTA and uneven development in the North American apparel industry

The various contributions to this book have documented how NAFTA-inspired firm strategies are changing the geography of apparel production in North America. The authors show in myriad ways how companies at different positions along the apparel commodity chain are responding to the new institutional and regulatory environment that NAFTA creates. By making it easier for U.S. companies to take advantage of Mexico as a nearby low-cost site for export-oriented apparel production, NAFTA is deepening the regional division of labor within North America, and this process has consequences for firms and workers in each of the signatory countries. In the introduction to this book we alluded to the obvious implications of shifting investment and trade patterns in the North American apparel industry for employment in the different countries. In this concluding chapter we focus on Mexico in the NAFTA era, specifically the extent to which Mexico's role in the North American economy facilitates or inhibits its economic development. W e begin with a discussion of the contemporary debate about Mexico's development, which turns on the question of how to assess the implications of Mexico's rapid and pro-found process of economic reform. Second, we focus on the textile and apparel industries as sectors that have been significantly affected by changes in regulatory environments at both the global and regional levels. Third, we examine the evidence regarding Mexico's NAFTA-era export dynamism, and in particular we emphasize the importance of interfirm networks, both for making sense of Mexico's meteoric rise among apparel exporters and for evaluating the implications of this dynamism for development. Fourth, we turn to a consideration of the national political-economic environment that shapes developmental outcomes for all Mexicans. Although regional disparities within Mexico are profound, aspects of government policy, such as management of the national currency, and characteristics of the institutional environment, such as industrial relations, have nationwide effects, and critics of NAFTA charge that these factors are contributing to a process of economic and social polarization that is ever more evident (Morales 1999; Dussel Peters 2000). Finally, we suggest that the mixed consequences of Mexico's NAFTA-era growth can be taken as emblematic of the contradictions that the process of globalization poses for economic and social development. The anti-sweatshop campaign in North America is one example of transnational or crossborder movements that are emerging to address the negative consequences of this process. In bringing attention to the problem of sweatshop production in North America, activists are developing strategies that rely on a network logic that is not dissimilar to the approaches reflected in the various chapters of this book. © 2009 by Temple University Press. All rights reserved.

Experimental and numerical study of the cold crucible melting process

The cold crucible, or induction skull melting process as is otherwise known, has the potential to produce high purity melts of a range of difficult to melt materials, including Ti–Al and Ti6Al4V alloys for Aerospace, Ti–Ta and other biocompatible materials for surgical implants, silicon for photovoltaic and electronic applications, etc. A water cooled AC coil surrounds the crucible causing induction currents to melt the alloy and partially suspend it against gravity away from water-cooled surfaces. Strong stirring takes place in the melt due to the induced electromagnetic Lorentz forces and very high temperatures are attainable under the right conditions (i.e., provided contact with water cooled walls is minimised). In a joint numerical and experimental research programme, various aspects of the design and operation of this process are investigated to increase our understanding of the physical mechanisms involved and to maximise process efficiency. A combination of FV and Spectral CFD techniques are used at Greenwich to tackle this problem numerically, with the experimental work taking place at Birmingham University. Results of this study, presented here, highlight the influence of turbulence and free surface behaviour on attained superheat and also discuss coil design variations and dual frequency options that may lead to winning crucible designs.

Computational modelling of bubbles, droplets and particles in metals reduction and refining

The CFD modelling of metals reduction processes particularly always seems to involve the interaction of liquid metals, a gas (often air) top space, liquid droplets in the top space and injection of both solid particles and gaseous bubbles into the bath. These phases all interact and exhange mass, momentum and energy. Often it is the extent to which these multi-phase phemomena can be effectively captured within the CFD model which determines whether or not a tool of genuine use to the target industry sector can constructed. In this paper we discuss these issues in the context of two problems - one involving the injection of sparging gases into a steel continuous caster and the other based on the development of a novel process for aluminium electrolysis.

Channel Catchments Cluster. Recent developments in tools and techniques for water quality management in the France (Channel) England region

The Channel Catchments Cluster (3C) aims to capitalise on outputs from some of the recent projects funded through the INTERREG IVa France (Channel) England programme. The river catchment basins draining into the Channel region drain an area of 137,000km2 and support a human population of over 19M. Throughout history, these catchments, rivers and estuaries have been centres of habitation, developed through commerce and industry, providing transport links to hinterland areas. These catchments also provide drinking water and food through provision of agriculture, fisheries and aquaculture. In addition, many parts of the region are also economically important now for the tourism and leisure industries. Consequently, there is a need to manage the balance of these many and varied human activities within the catchments, rivers, estuaries and marine areas to ensure that they are maintained or restored to good environmental condition . This document highlights some of the recent work carried out by projects within the INTERREG IVa programme that provide tools and techniques to assist in the achievement of these goals.

Light tunneling via resonant surface plasmon polariton states and the enhanced transmission of periodically nanostructured metal films: An analytical study

An analytical treatment of optical transmission through periodically nanosructured metal films capable of supporting surface-plasmon polaritons is presented. The optical properties of such metal films are governed by surface polariton behavior in a periodic surface structure forming a surface polaritonic crystal. Due to different configurations of the electromagnetic field of surface polariton modes, only states of even Brillouin zones are responsible for the optical transmission enhancement at normal incidence. The transmission enhancement is related to photon tunneling via resonant states of surface polariton Bloch modes in which the energy buildup takes place. Surface polariton states of at least one of the film interfaces contribute to the transmission resonance which occurs due to tunnel coupling between photons and surface polaritons on the opposite interfaces. Under double-resonance conditions, resonant tunneling between surface polariton states of both interfaces is achieved, which leads to further enhancement of the transmission efficiency. The double-resonance conditions occur not only in the case of a film in symmetric environment but can also be engineered for a film on a substrate. Light tunneling via surface polariton states can take place directly through a structured metal film and does not necessarily require holes in a film.

Use and access to ICT in students of public secondary schools in Chihuahua City, Mexico: inclusion in teaching and digital literacy

This paper addresses the issue of the digital divide in students of public secondary schools at Chihuahua City, Mexico. It seeks to identify potential inequality of opportunities with regards to subjects’ access to information, knowledge and education through the ICT (internet, mobile telephony, broadband and television). The study takes three schools as investigative stage, using the survey as a data collection instrument, identifying patterns of behavior regarding: general knowledge of them, access to computer equipment and internet, and characterization of their use. Other aspects of analysis are the identification of the educational level of parents and access to technology resources available for academic and non-academic purposes in various application areas (home, school and social environment). The proposal concludes, that it is through the recollection of alternatives suggested by the teachers themselves to incorporate ICT for teaching purposes in a systematic and planned fashion, whose greatest reflection manifests in better digital literacy indicators.

Performing Pedagogies and Exploring Embodied Knowledge

Performing Pedagogies was a week-long performance and exhibition series I organized that took place in Kingston, Ontario between March 15th - March 20th 2016. The motivation for this project came from a desire to explore performative modes of experiencing critical, embodied knowledge. The series featured five performances, a long distance collaboration between thirty-one Queen’s undergraduate students and a Vancouver artist-run free school (The School for Eventual Vacancy), a subsequent exhibition, a panel discussion, and a radical performance pedagogy workshop led by co-artistic director of the international performance art troupe, La Pocha Nostra. Artists featured included Golboo Amani, Basil AlZeri, Caitlin Chaisson, Justin Langlois, Saul Garcia-Lopez, Francisco-Fernando Granados, and Andrew Rabyniuk. By curating examples of performance art that variously incorporated embodied pedagogical interventions, I examined the processes of performance as pedagogy. Performing Pedagogies explored interventions into contemporary contours of neoliberal education paradigms through embodied encounters—fostering conversations about the meanings and limitations of knowledge dissemination and education today and posing questions about possibilities for radical pedagogies, embodied knowledge, and counter curricula.