A infância brasileira e a história das ideias pedagógicas: rastros e traços de uma construção social do ser criança

O item não apresenta o texto completo, para aquisição do livro na íntegra você poderá acessar a Editora da UFSCar por meio do link: www.editora.ufscar.br

Preparação de professores/atores para gravação de vdeoaula: uso de elementos audiovisuais.

O material trata-se da elaboração de videoaulas. Nele, o professor Adail R. L. Gonçalves enfatiza elementos audiovisuais para gravação, como a caracterização física .

Preparação de professores/atores para gravação de videoaula: elementos audiovisuais/enquadramento de câmera

O material trata-se da elaboração de videoaulas. Nele, o professor Adail R. L. Gonçalves continua a trabalhar elementos audiovisuais para gravação relacionados ao enquadramento de câmera.

Traços toponímicos da Freguesia da Sé

Os povoadores da Ilha da Madeira trouxeram muitas tradições e costumes oriundos das terras que provinham. Passaram esses hábitos para a nova terra e adequaram-se ao meio insular. O processo de ajustamento a esse meio incluiu adaptarem-se ao mesmo e atribuir localizações. Estudar a toponímia, ciência que estuda os nomes dos lugares, implica abordar as múltiplas componentes científicas que a ela estão interligadas e contextualiza-las no passado e no presente. Na Ilha da Madeira são poucas as publicações sobre a toponímia em comparação a Portugal Continental. Apesar do número pequeno, existem outros materiais de estudo como os primeiros testemunhos da povoação, justificações de atribuições entre outros documentos até mais antigos ao aparecimento desta ciência. Apresenta-se nesta investigação o resultado de uma pesquisa de vários tipos de materiais “texto” como: documentos específicos de várias entidades que têm o seu espólio no Arquivo Regional da Madeira (ARM), livros publicados, artigos, almanaques, roteiros e publicações periódicas; E “não texto” como: Plantas cartográficas de vários séculos da cidade do Funchal, pinturas e fotografias. O fato da área escolhida para estudo ser a Freguesia da Sé permitiu um estudo In loco e registo atual em fotografias dos locais públicos existentes e possíveis comparações aos registos anteriores. Agrupadas as características da zona estudada a nível social e urbanístico, justificam a evolução dos topónimos que tiveram as suas grandes alterações desde o final do século XIX até meados do século XX. A nível social os testemunhos estrangeiros traçam o panorama público e intercultural da Freguesia da Sé. A divisão dos topónimos por categorias, possibilitou várias conclusões sobre os assuntos da história madeirense como também a nível percentual, quais os grupos mais dominantes nesta freguesia e o porquê. Por fim, este estudo é um contributo para a história da toponímia na Ilha da Madeira, contextualizada essencialmente em termos históricos, linguísticos, sociais e urbanos.

Solução construtiva com elementos de aço enformados a frio

A atual dissertação consiste numa apreciação global dos vários critérios que integram a aplicação do método construtivo de elementos estruturais de aço enformado a frio, muitas vezes designado por método prescritivo da construção em “aço leve”, “Light Steel Framing” (LSF) ou em alternativa também designado de “Light Gauge Steel Framing” (LGSF) e está especialmente vocacionado para a construção de edifícios de um a três pisos. Este conceito tem origem no facto de se usar chapas de aço de espessura reduzida, respetivamente mais leve, para fabricação dos perfis o que contribui para um menor peso dos elementos estruturais. Será abordado essencialmente o sector dos edifícios de habitação bem como a reabilitação dos mesmos, com recurso à solução em estudo, dado que é um dos setores que detém maior impacte socio-económico e ambiental. O estudo engloba igualmente a descrição e análise dos métodos construtivos, bem como os produtos empregues nesta solução sustentável, definindo desta forma uma resposta ajustada a cada subsistema da construção, desde estrutura, pavimentos, coberturas, fachadas, divisórias, climatização e acústica. Por fim, para obter um retrato da prática na Região Autónoma da Madeira, face a este tipo de construção sustentável, realizou-se uma análise de casos de estudo, nomeadamente no que diz respeito à viabilidade económica desta solução construtiva.

A personalidade nos trabalhos em grupo no ensino superior

O Ensino Superior é um contexto fundamental no desenvolvimento pessoal, profissional e social do indivíduo, pois pretende que os indivíduos obtenham conhecimentos técnicos específicos na sua área de formação, e que ao mesmo tempo desenvolvam competências pessoais e sociais, fundamentais para ingressar no mundo do trabalho. Dessa forma, a metodologia dos trabalhos em grupo tem sido muito adotada pelas várias universidades, uma vez que tem sido apontada como sendo uma estratégia adequada para o desenvolvimento de competências ao nível da comunicação, resolução de conflitos e liderança, cada vez mais procuradas pela realidade profissional. A personalidade tem sido também muito considerada no que toca aos requisitos exigidos pelas entidades empregadoras, uma vez que as características da personalidade são determinantes no comportamento profissional de um indivíduo. Este fator tornar-se ainda mais importante quando estamos perante um trabalho em grupo, uma vez que o bom funcionamento do mesmo e a conquista de bons resultados, dependem da forma como os elementos do grupo conjugam cada uma das suas singularidades. Assim, este estudo longitudinal, enquadrado numa metodologia quantitativa, pretendeu analisar os traços de personalidade dos time-organizer dos grupos em dois momentos distintos, de forma a comparar as perceções nessas duas fases do trabalho. Foi utilizada uma amostra de 92 alunos do 1º Ciclo da Universidade da Madeira, sendo que 17 dos quais são time-organizer dos seus grupos. Os dados foram recolhidos a partir de um questionário, baseado no Big Five Inventory, versão abreviada de 10 itens (Rammstedt & John, 2006). No que se refere aos resultados obtidos, verificamos que o traço de personalidade Conscienciosidade foi o mais predominante nos time-organizer da amostra. No entanto, foi curioso verificar que as perceções, sobre a personalidade do time-organizer, alteraram-se no decorrer do trabalho. Por fim, constatou-se que houve divergências entre as perceções dos alunos time-organizer e dos restantes alunos.

Áreas de transição rural e urbana em São Gonçalo do Amarante : elementos para delimitação no planejamento territorial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Análises de elementos arquitetônicos de proteção solar em edificações institucionais na cidade de Natal/RN Diretrizes projetuais

The present work concerns the use of shade elements as architectural elements to block sunlight in public buildings. In a city like Natal, (5o South) the incidence of sunrays in any type of design should be a constant concern for all the architects. Besides, this habit of avoiding insolation in the environment is not a common practice. Within this context, the present work has the objective to dig deep into the knowledge of solar control, studying some cases and verifying its function according to the orientation and the original design of the building, having in mind if the shade elements usually used in the region have achieved their purpose of providing protection against the incidence of direct sun rays. This study considers the position of the shade element (horizontal and vertical), the angle formed between them and the respective facades, and the local of the buildings in relation to their orientation during the summer, winter and equinox solstice. As supporting instruments the solar map of the city and the protractor, for measuring shade angles, were used. It was concluded that in all the cases studied, it was not possible to obtain the maximum use of the elements. It was verified that the best type of shade element (more efficient) for the city of Natal is the mixed type (horizontal and vertical) and that the vertical shade elements are more efficient in the early mornings and late afternoon. The horizontal shade elements are used more effective at midday. We intend to present the results of this study to the architects in the region in order to show them the correct ways of using the shade elements according to the possible orientation on the facade, as a supporting tool at the time of designing a project as well as a subsidy for further discussions on the elaboration of the new urban standards for the city of Natal/RN

Análise e avaliação dos elementos de penetração no solo de equipamentos rodoviários após revestimento

The main objective is to analyze the abrasive wear resistance to the low stress of the elements that make up the organs of road machinery that are exposed directly to contact with abrasives. These samples were analyzed after these elements are coated superficially by the process of welding electrode coated with (SAER) and the manual process of coating type LVOF thermal spraying. As well, is to provide suggestions for a better recovery and return of these elements, which are reducing costs and avoiding downtime in the fronts of service. The samples were made from a substrate of carbon ABNT 1045 tempered steel, following the same specifications and composition of metals and alloys of constituents was followed the standard governing the dimensions of these samples and in accordance with the corresponding size. The results were evaluated by testing the hardness, abrasion resistance to wear by the low stress and the loss of volume involving the microstructure of coatings analyzed

Estudo do comportamento plástico, mecânico, microestrutural e térmico do concreto produzido com resíduo de porcelanato

Population growth experienced in major cities, allied to society s need of infra-structure, especially ones related to habitational demands, increases the consumption of construction materials. As a consequence, consumption of natural resources itself. Thus, due to this process, concrete is one of the most produced materials in civil construction. This is also due to the great diversity of its application, easiness in its execution and adequate mechanical performance, as well as low production costs. Following the same tendencies in construction development, the ceramic industry has intensified the production of porcelain ceramic tiles and floors. These are achieved by a fine finishing and receive polishing at the end of the fabrication process. This work researched the use of porcelain residues in polishing for the production of concrete. All of which; due to economical and environmental issues. This process aims to prove adequate destiny for this type of residue, due to environmental issues, incorporating it to the concrete itself; all of which provides economy in consumption of the materials that constitute concrete. Thus, the main characteristics of concrete were investigated through the inclusion of different concentration of the porcelain residue as additional trait element. The residue rates incorporated to the trait varied from 10% to 50% in relation to the cement mass, in the traits with plastic additives and without plastic additives. It is observed that the inclusion of porcelain residue produced a meaningful alteration in the consistency of fresh concrete. This residue has a fine granulometry and it considerably absorbed the water used in the concrete spreading, influencing the way this material is dealt with. Thus, the value of cement striking decreases with the increase of residues present in trait. The maximal incorporation of the residue was of 50%, massively, for the same factor water/initial cement. The use of residues in concrete results in an 40% increase in the compression resistance. It is also proportional to residue concentration of porcelain in the trait. The microstructure was also favored once porosity and concrete absorption decreases with the use of this residue. The parameters demonstrate the quality and durability of the concrete produced with this residue. The use of porcelain residue in concrete composition has not produced meaningful thermal behavior changes. Thermal conductivity, heat capacity and thermal diffusivity have been maintained basically constant

Concreto celular polimérico: influência na adição de resíduo de poliéster insaturado termofixo

This work addresses the production of lightweight concrete building elements, such as plates, prefabricated slabs for pre-molded and panels of fencing, presenting a singular concrete: the Lightweight Concrete, with special properties such low density and good strength, by means of the joint use of industrial waste of thermosetting unsaturated polyesters and biodegradable foaming agent, named Polymeric Lightweight Concrete. This study covered various features of the materials used in the composition of the Polymeric Lightweight Concrete, using a planning of factorial design 23, aiming at studying of the strength, production, dosage processes, characterization of mechanical properties and microstructural analysis of the transition zone between the light artificial aggregate and the matrix of cement. The results of the mechanical strength tests were analyzed using a computational statistics tool (Statistica software) to understand the behavior and obtain the ideal quantity of each material used in the formula of the Polymeric Lightweight Concrete. The definition of the ideal formula has the purpose of obtaining a material with the lowest possible dry density and resistance to compression in accordance with NBR 12.646/92 (≥ 2.5 MPa after 28 days). In the microstructural characterization by scanning electron microscopy it was observed an influence of the materials in the process of cement hydration, showing good interaction between the wrinkled face of the residue of unsaturated polyesters thermosetting and putty and, consequently, the final strength. The attaining of an ideal formula, given the Brazilian standards, the experimental results obtained in the characterization and comparison of these results with conventional materials, confirmed that the developed Polymeric Lightweight Concrete is suitable for the production of building elements that are advantageous for construction

Diagnóstico da possível influência da atividade petrolífera em sedimentos de fundo da Bacia Piranhas-Açu, região Baixo Açu/RN

It is located in an area of increasing oil exploration, the region of the Lower Açu is at the mercy of a possible pollution generated by this economic activity, which includes various chemical substances harmful to health, such as metals. This thesis aims to, diagnose the areas of River Piranhas-Açu, a region of the Lower Açu, which are polluted by traces factors and more. In this study, it was determined the concentration of the chemica elements Al, CD, Cr, Cu, Fe, Mn, Ni, P, Pb, V and Zn, through the technique of ICP-OES analysis and the size of sediments and their contents organic matter. Were mapped by GPS, 12 points from collections. The interpretations of the results, together associating that allowed pollution to a possible contamination by oil activity. The results showed tha some regions have low concentrations of cadmium, lead, copper, manganese and zinc unable to promote damage to human health. However, there are places where the concentrations of certain metals chromium, iron and zinc are moderately polluted compared to the results with the reference values of literature and others that are highly polluted by iron. However, due to a greater number of wells in production in those locations, those higher concentrations, it can be suggested a possible influence of oi production in some areas with concentrations of chromium and lead are higher than the rest of the points of monitoring. Moreover, it is observed that the highest levels of metals found in sediment of finer texture and more organic matter content

Caracterização ambiental de bancos areno-lamosos nos campos petrolíferos de Macau e Serra (RN), como subsídio às medidas mitigadoras ao processo erosivo

On Rio Grande do Norte northern coast the process of sediment transport are intensely controlled by wind and sea (waves and currents) action, causing erosion and shoreline morphological instability. Due to the importance of such coastal zone it was realized the multi-spectral mapping and physical-chemical characterization of mudflats and mangroves aiming to support the mitigating actions related to the containment of the erosive process on the oil fields of Macau and Serra installed at the study area. The multi-spectral bands of 2000 and 2008 LANDSAT 5 TM images were submitted on the several digital processing steps and RGB color compositions integrating spectral bands and Principal Components. Such processing methodology was important to the mapping of different units on surface, together with field works. It was possible to make an analogy of the spectral characteristics of wetlands with vegetations areas (mangrove), showing the possibility to make a restoration of this area, contributing with the environmental monitoring of that ecosystem. The maps of several units were integrated in GIS environment at 1:60,000 scale, including the classification of features according to the presence or absence of vegetation cover. Thus, the strategy of methodology established that there are 10.13 km2 at least of sandy-muddy and of these approximately 0.89 km2 with the possibility to be used in a reforestation of typical flora of mangrove. The physical-chemical characterization showed areas with potential to introduce local species of mangrove and they had a pH above neutral with a mean of 8.4. The characteristic particle size is sand in the fine fractions, the high levels of carbonate, organic matter and major and trace element in general are concentrated where the sediment had the less particles size, showing the high correlation that those elements have with smaller particles of sediment. The application of that methodological strategy is relevant to the better understanding of features behavior and physical-chemical data of sediment samples collected on field allow the analysis of efficiency/capability of sandy-muddy to reforestation with local mangrove species for mitigation of the erosive action and coastal processes on the areas occupied by the oil industry

Avaliação da correlação entre os parâmetros, carbono orgânico total e elementos tóxicos, em solo de um posto de serviço e revenda de combustíveis

Today a major responsibility for the contamination of soil and groundwater and surface water are establishments known as gas stations of fuel which has attracted increasing attention from both the general population as the state agencies of environmental control due to leaks in storage tanks and mainly to disruption of pipe corrosion of tanks and pumping. Other services, like oil changes and car wash are also causes for concern in this type of establishment. These leaks can cause or waste produced, and the contamination of aquifers, serious health problems and public safety, since most of these stations located in urban areas. Based on this, the work was to evaluate soil contamination of a particular service station and fuel sales in the city of Natal, through the quantification of heavy metals like Cd, Cu, Cr, Ni, Pb, Zn of total organic carbon (TOC) and organic matter using different techniques such as optical emission spectrometry with inductively coupled plasma source (ICP OES), Total Organic Carbon analyzer and gravimetric analysis respectively. And also to characterize the soil through particle size analysis. Samples were taken in 21 georeferenced points and collected in the same period. The soils sampled in sampling stations P3, P5, P6, P10, P11, P12, P13, P14, P15, P17, P18 and P20 showed the smallest size fractions ranging from fine sand to medium sand. The other study sites ranged from fine sand to medium sand, except the point P8 showed that only the type size medium sand and P19, indicating a particle size of the coarse type. The small correlation of organic matter with the elements studied in this work suggests that these are not of anthropogenic origin but geochemical support

Avaliação da contaminação por elementos metálicos dos sedimentos do Estuário Santos - São Vicente

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)