Prove di ozonolisi sui fanghi biologici prodotti da impianti di depurazione delle acque reflue urbane

La tecnica di ozonolisi viene applicata ai fanghi biologici derivanti da impianti di depurazione acque reflue urbane, e consiste nell'ottenere, grazie all'ozono, una minor massa fangosa da smaltire e una miglior trattabilità del fango residue. In questo elaborato si prendono in esame le sperimentazioni effettuate a Marina di Ravenna e si estraggono le prime conclusioni gestionali, economiche e ambientali sull'applicabilità del metodo a questo tipo di fango.

The effects of supplementation of decapod zoea to Artemia basal diet on the digestive gland histology and the fatty acid composition in common octopus (Octopus vulgaris) paralarvae.

[EN]The present study aimed to evaluate the effect of the supplementation of different crab zoeas to enriched Artemia basal diet for O. vulgaris paralarvae during the first month of life. Paralarvae were fed using: enriched Artemia nauplii alone and Artemia co-fed with either first zoea stages of Grapsus adscensionis or Plagusia depressa. The experiment was carried out over a period of 28 days, in 0.12 m3 tanks with a flow-through rearing system. Growth in dry weightas well as mantle length and width were assessed weekly. Additionally, prey and paralarvae fatty acid composition and digestive gland (DG) histology were evaluated.

Comparación entre la calidad de puestas naturales e inducidas, mediante inyección e implante de GnRHa, del pez de limón (Seriola dumerili).

[EN]For this study, a total of 19 greater amberjack (Seriola dumerili) broodstock were used. Females with oocites bigger than 600μ, and fluent males with a mean weight of 10.72±1.22 kg, fameles, and 10.77±2.33 kg males. The experimental tanks were circular tanks of 40 m3 capacity. One of the tanks were not induced and the other two were with GnRHa, one with injections and the other by implants. Best results, in all parameters studied were with natural spawns, with a 84.37% of fertilization, 92.21% of viable eggs at 24 hours of spawn, 96.60% of hatching, 69.91% of larvae one day after hatching and 10.78% of 5 day life larvae.

Analisi degli aspetti di qualità nella gestione dei sistemi di drenaggio urbano attraverso modellazione numerica e indagini di campo

In order to protect river water quality, highly affected in urban areas by continuos as intermittent immissions, it is necessary to adopt measures to intercept and treat these polluted flows. In particular during rain events, river water quality is affected by CSOs activation. Built in order to protect the sewer system and the WWTP by increased flows due to heavy rains, CSOs divert excess flows to the receiving water body. On the basis of several scientific papers, and of direct evidences as well, that demonstrate the detrimental effect of CSOs discharges, also the legislative framework moved towards a stream standard point of view. The WFD (EU/69/2000) sets new goals for receiving water quality, and groundwater as well, through an integrated immission/emissions phylosophy, in which emission limits are associated with effluent standards, based on the receiving water characteristics and their specific use. For surface waters the objective is that of a “good” ecological and chemical quality status. A surface water is defined as of good ecological quality if there is only slight departure from the biological community that would be expected in conditions of minimal anthropogenic impact. Each Member State authority is responsible for preparing and implementing a River Basin Management Plan to achieve the good ecological quality, and comply with WFD requirements. In order to cope with WFD targets, and thus to improve urban receiving water quality, a CSOs control strategy need to be implemented. Temporarily storing the overflow (or at least part of it) into tanks and treating it in the WWTP, after the end of the storm, showed good results in reducing total pollutant mass spilled into the receiving river. Italian State Authority, in order to comply with WFD statements, sets general framework, and each Region has to adopt a Water Remediation Plan (PTA, Piano Tutela Acque), setting goals, methods, and terms, to improve river water quality. Emilia Romagna PTA sets 25% reduction up to 2008, and 50% reduction up to 2015 fo total pollutants masses delivered by CSOs spills. In order to plan remediation actions, a deep insight into spills dynamics is thus of great importance. The present thesis tries to understand spills dynamics through a numerical and an experimental approach. A four months monitoring and sampling campaign was set on the Bologna sewer network, and on the Navile Channel, that is the WWTP receiving water , and that receives flows from up to 28 CSOs during rain events. On the other hand, the full model of the sewer network, was build with the commercial software InfoWorks CS. The model was either calibrated with the data from the monitoring and sampling campaign. Through further model simulations interdependencies among masses spilled, rain characteristics and basin characteristics are looked for. The thesis can be seen as a basis for further insighs and for planning remediation actions.

Il ruolo delle idee e del loro cambiamento nei processi di policy making universitario nel mondo anglosassone dagli anni ottanta ad oggi. I casi di Inghilterra e Nuova Zelanda in prospettiva comparata

THE TITLE OF MY THESIS IS THE ROLE OF THE IDEAS AND THEIR CHANGE IN HIGHER EDUCATION POLICY-MAKING PROCESSES FROM THE EIGHTIES TO PRESENT-DAY: THE CASES OF ENGLAND AND NEW ZEALAND IN COMPARATIVE PERSPECTIVE UNDER A THEORETICAL POINT OF VIEW, THE AIM OF MY WORK IS TO CARRY OUT A RESEARCH MODELLED ON THE CONSTRUCTIVIST THEORY. IT FOCUSES ON THE ANALYSIS OF THE IMPACT OF IDEAS ON THE PROCESSES OF POLICY MAKING BY MEANS OF EPISTEMIC COMMUNITIES, THINK TANKS AND VARIOUS SOCIOECONOMIC CONTEXTS THAT MAY HAVE PLAYED A KEY ROLE IN THE CONSTRUCTION OF THE DIFFERENT PATHS. FROM MY POINT OF VIEW IDEAS CONSTITUTE A PRIORITY RESEARCH FIELD WHICH IS WORTH ANALYSING SINCE THEIR ROLE IN POLICY MAKING PROCESSES HAS BEEN TRADITIONALLY RATHER UNEXPLORED. IN THIS CONTEXT AND WITH THE AIM OF DEVELOPING A RESEARCH STRAND BASED ON THE ROLE OF IDEAS, I INTEND TO CARRY ON MY STUDY UNDER THE PERSPECTIVE OF CHANGE. DEPENDING ON THE DATA AND INFORMATION THAT I COLLECTED I EVALUATED THE WEIGHT OF EACH OF THESE VARIABLES AND MAYBE OTHERS SUCH AS THE INSTITUTIONS AND THE INDIVIDUAL INTERESTS, WHICH MAY HAVE INFLUENCED THE FORMATION OF THE POLICY MAKING PROCESSES. UNDER THIS LIGHT, I PLANNED TO ADOPT THE QUALITATIVE METHODOLOGY OF RESEARCH WHICH I BELIEVE TO BE VERY EFFECTIVE AGAINST THE MORE DIFFICULT AND POSSIBLY REDUCTIVE APPLICATION OF QUANTITIVE DATA SETS. I RECKON THEREFORE THAT THE MOST APPROPRIATE TOOLS FOR INFORMATION PROCESSING INCLUDE CONTENT ANALYSIS, AND IN-DEPTH INTERVIEWS TO PERSONALITIES OF THE POLITICAL PANORAMA (ÉLITE OR NOT) WHO HAVE PARTICIPATED IN THE PROCESS OF HIGHER EDUCATION REFORM FROM THE EIGHTIES TO PRESENT-DAY. THE TWO CASES TAKEN INTO CONSIDERATION SURELY SET AN EXAMPLE OF RADICAL REFORM PROCESSES WHICH HAVE OCCURRED IN QUITE DIFFERENT CONTEXTS DETERMINED BY THE SOCIOECONOMIC CHARACTERISTICS AND THE TRAITS OF THE ÉLITE. IN NEW ZEALAND THE DESCRIBED PROCESS HAS TAKEN PLACE WITH A STEADY PACE AND A GOOD GRADE OF CONSEQUANTIALITY, IN LINE WTH THE REFORMS IN OTHER STATE DIVISIONS DRIVEN BY THE IDEAS OF THE NEW PUBLIC MANAGEMENT. CONTRARILY IN ENGLAND THE REFORMATIVE ACTION OF MARGARET THATCHER HAS ACQUIRED A VERY RADICAL CONNOTATION AS IT HAS BROUGHT INTO THE AMBIT OF HIGHER EDUCATION POLICY CONCEPTS LIKE EFFICIENCY, EXCELLENCE, RATIONALIZATION THAT WOULD CONTRAST WITH THE GENERALISTIC AND MASS-ORIENTED IDEAS THAT WERE FASHIONABLE DURING THE SEVENTIES. THE MISSION I INTEND TO ACCOMPLISH THORUGHOUT MY RESEARCH IS TO INVESTIGATE AND ANALYSE INTO MORE DEPTH THE DIFFERENCES THAT SEEM TO EMERGE FROM TWO CONTEXTS WHICH MOST OF THE LITERATURE REGARDS AS A SINGLE MODEL: THE ANGLO-SAXON MODEL. UNDER THIS LIGHT, THE DENSE ANALYSIS OF POLICY PROCESSES ALLOWED TO BRING OUT BOTH THE CONTROVERSIAL AND CONTRASTING ASPECTS OF THE TWO REALITIES COMPARED, AND THE ROLE AND WEIGHT OF VARIABLES SUCH AS IDEAS (MAIN VARIABLE), INSTITUTIONAL SETTINGS AND INDIVIDUAL INTERESTS ACTING IN EACH CONTEXT. THE CASES I MEAN TO ATTEND PRESENT PECULIAR ASPECTS WORTH DEVELOPING AN IN-DEPTH ANALYSIS, AN OUTLINE OF WHICH WILL BE PROVIDED IN THIS ABSTRACT. ENGLAND THE CONSERVATIVE GOVERNMENT, SINCE 1981, INTRODUCED RADICAL CHANGES IN THE SECTOR OF HIGHER EDUCATION: FIRST CUTTING DOWN ON STATE FUNDINGS AND THEN WITH THE CREATION OF AN INSTITUTION FOR THE PLANNING AND LEADERSHIP OF THE POLYTECHNICS (NON-UNIVERSITY SECTOR). AFTERWARDS THE SCHOOL REFORM BY MARGARET THATCHER IN 1988 RAISED TO A GREAT STIR ALL OVER EUROPE DUE TO BOTH ITS CONSIDERABLE INNOVATIVE IMPRINT AND THE STRONG ATTACK AGAINST THE PEDAGOGY OF THE ‘ACTIVE’ SCHOOLING AND PROGRESSIVE EDUCATION, UNTIL THEN RECOGNIZED AS A MERIT OF THE BRITISH PUBLIC SCHOOL. IN THE AMBIT OF UNIVERSITY EDUCATION THIS REFORM, TOGETHER WITH SIMILAR MEASURES BROUGHT IN DURING 1992, PUT INTO PRACTICE THE CONSERVATIVE PRINCIPLES THROUGH A SERIES OF ACTIONS THAT INCLUDED: THE SUPPRESSION OF THE IRREMOVABILITY PRINCIPLE FOR UNIVERSITY TEACHERS; THE INTRODUCTION OF STUDENT LOANS FOR LOW-INCOME STUDENTS AND THE CANCELLATION OF THE CLEAR DISTINCTION BETWEEN UNIVERSITIES AND POLYTECHNICS. THE POLICIES OF THE LABOUR MAJORITY OF MR BLAIR DID NOT QUITE DIVERGE FROM THE CONSERVATIVES’ POSITION. IN 2003 BLAIR’S CABINET RISKED TO BECOME A MINORITY RIGHT ON THE OCCASION OF AN IMPORTANT UNIVERSITY REFORM PROPOSAL. THIS PROPOSAL WOULD FORESEE THE AUTONOMY FOR THE UNIVERSITIES TO RAISE UP TO 3.000 POUNDS THE ENROLMENT FEES FOR STUDENTS (WHILE FORMERLY THE CEILING WAS 1.125 POUNDS). BLAIR HAD TO FACE INTERNAL OPPOSITION WITHIN HIS OWN PARTY IN RELATION TO A MEASURE THAT, ACCORDING TO THE 150 MPS PROMOTERS OF AN ADVERSE MOTION, HAD NOT BEEN INCLUDED IN THE ELECTORAL PROGRAMME AND WOULD RISK CREATING INCOME-BASED DISCRIMINATION AMONG STUDENTS. AS A MATTER OF FACT THE BILL FOCUSED ON THE INTRODUCTION OF VERY LOW-INTEREST STUDENT LOANS TO BE SETTLED ONLY WHEN THE STUDENT WOULD HAVE FOUND A REMUNERATED OCCUPATION (A SYSTEM ALREADY PROVIDED FOR BY THE AUSTRALIAN LEGISLATION). NEW ZEALAND CONTRARILY TO MANY OTHER COUNTRIES, NEW ZEALAND HAS ADOPTED A VERY WIDE VISION OF THE TERTIARY EDUCATION. IT INCLUDES IN FACT THE FULL EDUCATIONAL PROGRAMME THAT IS INTERNATIONALLY RECOGNIZED AS THE POST-SECONDARY EDUCATION. SHOULD WE SPOTLIGHT A PECULIARITY OF THE NEW ZEALAND TERTIARY EDUCATION POLICY THEN IT WOULD BE ‘CHANGE’. LOOKING AT THE REFORM HISTORY RELATED TO THE TERTIARY EDUCATION SYSTEM, WE CAN CLEARLY IDENTIFY FOUR ‘SUB-PERIODS’ FROM THE EIGHTIES TO PRESENT-DAY: 1. BEFORE THE 80S’: AN ELITARIAN SYSTEM CHARACTERIZED BY LOW PARTICIPATION RATES. 2. BETWEEN MID AND LATE 80S’: A TREND TOWARDS THE ENLARGEMENT OF PARTICIPATION ASSOCIATED TO A GREATER COMPETITION. 3. 1990-1999: A FUTHER STEP TOWARDS A COMPETITIVE MODEL BASED ON THE MARKET-ORIENTED SYSTEM. 4. FROM 2000 TO TODAY: A CONTINUOUS EVOLUTION TOWARDS A MORE COMPETITIVE MODEL BASED ON THE MARKET-ORIENTED SYSTEM TOGETHER WITH A GROWING ATTENTION TO STATE CONTROL FOR SOCIAL AND ECONOMIC DEVELOPMENT OF THE NATION. AT PRESENT THE GOVERNMENT OF NEW ZEALAND OPERATES TO STRENGHTHEN THIS PROCESS, PRIMARILY IN RELATION TO THE ROLE OF TERTIARY EDUCATION AS A STEADY FACTOR OF NATIONAL WALFARE, WHERE PROFESSIONAL DEVELOPMENT CONTRIBUTES ACTIVELY TO THE GROWTH OF THE NATIONAL ECONOMIC SYSTEM5. THE CASES OF ENGLAND AND NEW ZEALAND ARE THE FOCUS OF AN IN-DEPTH INVESTIGATION THAT STARTS FROM AN ANALYSIS OF THE POLICIES OF EACH NATION AND DEVELOP INTO A COMPARATIVE STUDY. AT THIS POINT I ATTEMPT TO DRAW SOME PRELIMINARY IMPRESSIONS ON THE FACTS ESSENTIALLY DECRIBED ABOVE. THE UNIVERSITY POLICIES IN ENGLAND AND NEW ZEALAND HAVE BOTH UNDERGONE A SIGNIFICANT REFORMATORY PROCESS SINCE THE EARLY EIGHTIES; IN BOTH CONTEXTS THE IMPORTANCE OF IDEAS THAT CONSTITUTED THE BASE OF POLITICS UNTIL 1980 WAS QUITE RELEVANT. GENERALLY SPEAKING, IN BOTH CASES THE PRE-REFORM POLICIES WERE INSPIRED BY EGALITARIANISM AND EXPANSION OF THE STUDENT POPULATION WHILE THOSE BROUGHT IN BY THE REFORM WOULD PURSUE EFFICIENCY, QUALITY AND COMPETITIVENESS. UNDOUBTEDLY, IN LINE WITH THIS GENERAL TENDENCY THAT REFLECTS THE HYPOTHESIS PROPOSED, THE TWO UNIVERSITY SYSTEMS PRESENT SEVERAL DIFFERENCES. THE UNIVERSITY SYSTEM IN NEW ZEALAND PROCEEDED STEADILY TOWARDS THE IMPLEMENTATION OF A MANAGERIAL CONCEPTION OF TERTIARY EDUCATION, ESPECIALLY FROM 1996 ONWARDS, IN ACCORDANCE WITH THE REFORMATORY PROCESS OF THE WHOLE PUBLIC SECTOR. IN THE UNITED KINGDOM, AS IN THE REST OF EUROPE, THE NEW APPROACH TO UNIVERSITY POLICY-MAKING HAD TO CONFRONT A DEEP-ROOTED TRADITION OF PROGRESSIVE EDUCATION AND THE IDEA OF EDUCATION EXPANSION THAT IN FACT DOMINATED UNTIL THE EIGHTIES. FROM THIS VIEW POINT THE GOVERNING ACTION OF MARGARET THATCHER GAVE RISE TO A RADICAL CHANGE THAT REVOLUTIONIZED THE OBJECTIVES AND KEY VALUES OF THE WHOLE EDUCATIONAL SYSTEM, IN PARTICULAR IN THE HIGHER EDUCATION SECTOR. IDEAS AS EFFICIENCY, EXCELLENCE AND CONTROL OF THE PERFORMANCE BECAME DECISIVE. THE LABOUR CABINETS OF BLAIR DEVELOPED IN THE WAKE OF CONSERVATIVE REFORMS. THIS APPEARS TO BE A FOCAL POINT OF THIS STUDY THAT OBSERVES HOW ALSO IN NEW ZEALAND THE REFORMING PROCESS OCCURRED TRANSVERSELY DURING PROGRESSIVE AND CONSERVATIVE ADMINISTRATIONS. THE PRELIMINARY IMPRESSION IS THEREFORE THAT IDEAS DEEPLY MARK THE REFORMATIVE PROCESSES: THE AIM OF MY RESEARCH IS TO VERIFY TO WHICH EXTENT THIS STATEMENT IS TRUE. IN ORDER TO BUILD A COMPREHENSIVE ANALYLIS, FURTHER SIGNIFICANT FACTORS WILL HAVE TO BE INVESTIGATED: THE WAY IDEAS ARE PERCEIVED AND IMPLEMENTED BY THE DIFFERENT POLITICAL ELITES; HOW THE VARIOUS SOCIOECONOMIC CONTEXTS INFLUENCE THE REFORMATIVE PROCESS; HOW THE INSTITUTIONAL STRUCTURES CONDITION THE POLICY-MAKING PROCESSES; WHETHER INDIVIDUAL INTERESTS PLAY A ROLE AND, IF YES, TO WHICH EXTENT.

Effetto della temperatura di conservazione del latte, dalla raccolta all'affioramento, sulla microflora del latte, del sieroinnesto e del formaggio Trentingrana

This PhD research is part of a project addressed to improve the quality of Grana Trentino production. The objectives were to evaluated if milk storage and collection procedures may affect cheese-making technology and quality. Actually the milk is collected and delivered to the cheese factory just after milking in 50 L cans without refrigeration or in tanks cooled at 18 °C. This procedure is expensive (two deliveries each day) and the milk quality is difficult to preserve as temperatures are not controlled. The milk refrigeration at the farm could allow a single delivery to the dairy. Therefore it could be a good strategy to preserve raw milk quality and reduce cheese spoilage. This operation may, however, have the drawbacks of favouring the growth of psychrotrophic bacteria and changing the aptitude of milk to coagulation. With the aim of studying the effect on milk and cheese of traditional and new refrigerated technologies of milk storage, two different collection and creaming technologies were compared. The trials were replicated in three cheese factories manufacturing Grana Trentino. Every cheese-making day, about 1000 milk liters were collected from always the same two farms in the different collection procedures (single or double). Milk was processed to produce 2 wheels of Grana trentino every day. During the refrigerated trials, milk was collected and stored at the farm in a mixed tank at 12 or 8 °C and then was carried to the dairy in truck once a day. 112 cheese making day were followed: 56 for traditional technology and 56 for the refrigerated one. Each one of these two thechnologies lead to different ways of creaming: long time in the traditional one and shorter in the new one. For every cheese making day we recorded time, temperatures and pH during the milk processing to cheese. Whole milk before ceraming, cream and skim milk after creaming, vat milk and whey were sampled during every cheese-making day for analysis. After 18 months ripening we opened 46 cheese wheels for further chemical and microbiological analyses. The trials were performed with the aim of: 1 estimate the effect of storage temperatures on microbial communities, physico-chemical or/and rheological differences of milk and skim milk after creaming. 2 detect by culture dependent (plate counts) and indipendent (DGGE) methodolgies the microbial species present in whole, skimmed milk, cream and cheese sampled under the rind and in the core; 3 estimate the physico-chemical characteristics, the proteolytic activity, the content of free aminoacids and volatile compounds in 18 months ripened Grana Trentino cheeses from different storing and creaming of milk technologies. The results presented are remarkable since this is the first in-deep study presenting microbiological and chemical analysis of Grana Trentino that even if belonging to Grana Padano Consortium, it is clearly different in the milk and in the manufacturing technology.

Fluid dynamic analysis and modelling of industrial chemical equipment

The research is aimed at contributing to the identification of reliable fully predictive Computational Fluid Dynamics (CFD) methods for the numerical simulation of equipment typically adopted in the chemical and process industries. The apparatuses selected for the investigation, specifically membrane modules, stirred vessels and fluidized beds, were characterized by a different and often complex fluid dynamic behaviour and in some cases the momentum transfer phenomena were coupled with mass transfer or multiphase interactions. Firs of all, a novel modelling approach based on CFD for the prediction of the gas separation process in membrane modules for hydrogen purification is developed. The reliability of the gas velocity field calculated numerically is assessed by comparison of the predictions with experimental velocity data collected by Particle Image Velocimetry, while the applicability of the model to properly predict the separation process under a wide range of operating conditions is assessed through a strict comparison with permeation experimental data. Then, the effect of numerical issues on the RANS-based predictions of single phase stirred tanks is analysed. The homogenisation process of a scalar tracer is also investigated and simulation results are compared to original passive tracer homogenisation curves determined with Planar Laser Induced Fluorescence. The capability of a CFD approach based on the solution of RANS equations is also investigated for describing the fluid dynamic characteristics of the dispersion of organics in water. Finally, an Eulerian-Eulerian fluid-dynamic model is used to simulate mono-disperse suspensions of Geldart A Group particles fluidized by a Newtonian incompressible fluid as well as binary segregating fluidized beds of particles differing in size and density. The results obtained under a number of different operating conditions are compared with literature experimental data and the effect of numerical uncertainties on axial segregation is also discussed.

Numerical simulation of ion transport through ion channels and solid-state nanopores

Ion channels are pore-forming proteins that regulate the flow of ions across biological cell membranes. Ion channels are fundamental in generating and regulating the electrical activity of cells in the nervous system and the contraction of muscolar cells. Solid-state nanopores are nanometer-scale pores located in electrically insulating membranes. They can be adopted as detectors of specific molecules in electrolytic solutions. Permeation of ions from one electrolytic solution to another, through a protein channel or a synthetic pore is a process of considerable importance and realistic analysis of the main dependencies of ion current on the geometrical and compositional characteristics of these structures are highly required. The project described by this thesis is an effort to improve the understanding of ion channels by devising methods for computer simulation that can predict channel conductance from channel structure. This project describes theory, algorithms and implementation techniques used to develop a novel 3-D numerical simulator of ion channels and synthetic nanopores based on the Brownian Dynamics technique. This numerical simulator could represent a valid tool for the study of protein ion channel and synthetic nanopores, allowing to investigate at the atomic-level the complex electrostatic interactions that determine channel conductance and ion selectivity. Moreover it will provide insights on how parameters like temperature, applied voltage, and pore shape could influence ion translocation dynamics. Furthermore it will help making predictions of conductance of given channel structures and it will add information like electrostatic potential or ionic concentrations throughout the simulation domain helping the understanding of ion flow through membrane pores.

Impact of ocean acidification on phytoplankton growth and aggregation

Since the industrial revolution, the ocean has absorbed around one third of the anthropogenic CO2, which induced a profound alteration of the carbonate system commonly known as ocean acidification. Since the preindustrial times, the average ocean surface water pH has fallen by 0.1 units, from approximately 8.2 to 8.1 and a further decrease of 0.4 pH units is expected for the end of the century. Despite their microscopic size, marine diatoms are bio-geo-chemically a very important group, responsible for the export of massive amount of carbon to deep waters and sediments. The knowledge of the potential effects of ocean acidification on the phytoplankton growth and on biological pump is still at its infancy. This study wants to investigate the effect of ocean acidification on the growth of the diatom Skeletonema marinoi and on its aggregation, using a mechanistic approach. The experiment consisted of two treatments (Present and Future) representing different pCO2 conditions and two sequential experimental phases. During the cell growth phase a culture of S. marinoi was inoculated into transparent bags and the effect of ocean acidification was studied on various growth parameters, including DOC and TEP production. The aggregation phase consisted in the incubation of the cultures into rolling tanks where the sinking of particles through the water column was simulated and aggregation promoted. Since few studies investigated the effect of pH on the growth of S. marinoi and none used pH ranges that are compatible with the OA scenarios, there were no baselines. I have shown here, that OA does not affect the cell growth of S. marinoi, suggesting that the physiology of this species is robust in respect to the changes in the carbonate chemistry expected for the end of the century. Furthermore, according to my results, OA does not affect the aggregation of S. marinoi in a consistent manner, suggesting that this process has a high natural variability but is not influenced by OA in a predictable way. The effect of OA was tested over a variety of factors including the number of aggregates produced, their size and sinking velocity, the algal, bacterial and TEP content. Many of these variables showed significant treatment effects but none of these were consistent between the two experiments.

Harmful algae and their potential impacts on the coastal ecosystem: growth and toxin production dynamics

The main goal of the present thesis was to study some harmful algal species which cause blooms in Italian coastal waters, leading to consequences for human health, coastal ecosystem, fishery and tourism. In particular, in the first part of this thesis the toxicity of Adriatic strains of the raphidophyte Fibrocapsa japonica was investigated. Despite several hypotheses have been proposed for the toxic mechanism of the raphidophytes, especially for the species Chattonella antiqua and C. marina, which have been studied more extensively, just a few studies on the toxic effects of these species for different organisms were reported. Moreover, a careful reading of the literature evidenced as any ichthyotoxic events reported worldwide can be linked to F. japonica blooms. Although recently several studies were performed on F. japonica strains from the USA, Japan, Australia, New Zealand, the Netherlands, Germany, and France in order to characterize their growth and toxicity features, the work reported in this thesis results one of the first investigation on the toxic effects of F. japonica for different organisms, such as bacteria, crustaceans and fish. Mortality effects, together with haemolysis of fish erythrocytes, probably due to the relatively high amount of PUFAs produced by this species, were observed. Mortality for fish, however, was reported only at a high cell density and after a long exposition period (9-10 days); moreover a significant increase of H2O2 obtained in the tanks where sea basses were exposed to F. japonica was also relevant. This result may justify the absence of ichthyotoxic events in the Italian coasts, despite F. japonica blooms detected in these areas were characterized by high cell densities. This work reports also a first complete characterization of the fatty acids produced and extracellularly released by the Adriatic F. japonica, and results were also compared with the fatty acid profile of other strains. The absence of known brevetoxins in F. japonica algal extracts was also highlighted, leading to the hypothesis that the toxicity of F. japonica may be due to a synergic effect of PUFAs and ROS. Another microalgae that was studied in this thesis is the benthic dinoflagellate Ostreopsis cf. ovata. This species was investigated with the aim to investigate the effect of environmental parameters on its growth and toxicity. O. cf. ovata, in fact, shows different blooming periods along the Italian coasts and even the reported toxic effects are variable. The results of this work confirmed the high variability in the growth dynamic and toxin content of several Italian strains which were isolated in recent years along the Adriatic and Tyrrhenian Seas. Moreover, the effects of temperature and salinity on the behaviour of the different isolates are in good agreement with the results obtained from field surveys, which evidence as the environmental parameters are important factors modulating O. cf. ovata proliferation. Another relevant result that was highlighted is the anomaly in the production of palytoxin-like compounds reported by one of the studied isolate, in particular the one isolated in 2008 in Ancona (Adriatic Sea). Only this strain reported the absence of two (ovatoxin-b and –c) of the five ovatoxins so far known in the toxin profile and a different relative abundance of the other toxins. The last aspect that was studied in this thesis regards the toxin biosythesis. In fact, toxins produced (palytoxin-like compounds) or supposed to be produced (brevetoxin-like compounds) by O. cf. ovata and F. japonica, respectively, are polyketides, which are highly oxygenated compounds synthesized by complex enzymes known as polyketide synthase (PKS) enzymes. These enzymes are multi-domain complexes that structurally and functionally resemble the fatty acid synthases (FASs). This work reports the first study of PKS proteins in the dinoflagellates O. cf. ovata, C. monotis and in the raphidophyte F. japonica. For the first time some PKSs were identified in these species, confirming the presence of PKS proteins predicted by the in silico translation of the transcripts found in K. brevis also in other species. The identification of O. cf. ovata PKSs and the localization of the palytoxin-like compounds produced by this dinoflagellate in a similar location (chloroplast) as that observed for other dinoflagellate and cyanobacterial toxins provides some indication that these proteins may be involved in polyketide biosynthesis. However, their potential function as fatty acid synthases cannot be ruled out, as plant fatty acid synthesis also occurs within chloroplasts. This last hypothesis is also supported by the fact that in all the investigated species, and in particular in F. japonica, PKS proteins were present. Therefore, these results provide an important contribution to the study of the polyketides and of the involvement of PKS proteins in the toxin biosynthesis.

Der Einsatz elektrochemischer Methoden für die Untersuchung superschwerer Elemente

Das Hauptziel der vorliegenden Arbeit war die Entwicklung eines Experimentaufbaus für die elektrochemische Abscheidung von Transactiniden mit anschließender Detektion. Zu diesem Zweck wurden Experimente mit den Homologen dieser Elemente durchgeführt. Die Elektrodeposition von Tracermengen an Fremdelektroden führt zu einer Elektrodenbedeckung von weniger als einer Monolage. Die erforderlichen Abscheidepotentiale sind häufig positiver, als nach der Nernst’schen Gleichung zu erwarten ist. Dieses Phänomen nennt man Unterpotentialabscheidung. In zahlreichen Versuchen mit Radiotracern wurde die Abscheideausbeute als Funktion des Elektrodenpotentials bestimmt, wobei abzuscheidendes Ion, Elektrodenmaterial und Elektrolyt variiert wurden. Es wurden kritische Potentiale, bei denen eine nennenswerte Abscheidung gerade begann, ermittelt sowie Potentiale für die Abscheidung von 50 % der in der Lösung befindlichen Atome. Diese Werte wurden mit theoretisch vorhergesagten Potentialen und Werten aus der Literatur verglichen. Die Abscheidung von Pb als Homologem von Element 114 funktionierte sehr gut an Elektroden aus Palladium oder palladinierten Nickelelektroden unter Verwendung von 0,1 M HCl als Elektrolyt. Zur Charakterisierung der Unterpotentialabscheidung wurde neben der Radiotracer-Methode auch die Cyclovoltammetrie eingesetzt. Hier findet die Abscheidung der ersten Monolage auf der Elektrode ebenfalls häufig bei positiveren Potentialen statt, als die der Hauptmenge. Die mit beiden Methoden ermittelten Werte wurden einander gegenübergestellt. Die Elektrodeposition von kurzlebigen Isotopen muss sehr schnell erfolgen. Es konnte gezeigt werden, dass eine hohe Temperatur und damit verbunden eine niedrige Viskosität des Elektrolyten die Abscheidung beschleunigt. Ebenfalls wichtig ist ein gutes Rühren der Lösung, um eine kleine Nernst’sche Diffusionsschichtdicke zu erzielen. Das Verhältnis von Elektrodenfläche zu Elektrolytvolumen muss möglichst groß sein. Auf der Grundlage dieser Ergebnisse wurde eine für schnelle Elektrolysen optimierte Elektrolysezelle entwickelt. Unter Einsatz dieser Zelle wurden die Abscheidegeschwindigkeiten für verschiedene Ionen- und Elektrodenkombinationen gemessen. Es wurden Experimente zur Kopplung von Gasjet und Elektrolysezelle durchgeführt, dabei wurde sowohl mit am Reaktor erzeugten Spaltprodukten, mit Pb-Isotopen aus einer emanierenden Quelle und mit am Beschleuniger erzeugten Isotopen gearbeitet. Mit den dort gewonnenen Erkenntnissen wurde ein Experimentaufbau für die kontinuierliche Abscheidung und Detektion von kurzlebigen Isotopen realisiert. Am Beschleuniger wurden u. a. kurzlebige Hg- und Pb-Isotope erzeugt und mit einem Gasjet aus der Targetkammer zum ALOHA-System transportiert. Dort wurden sie in einem quasi-kontinuierlichen Prozess in die wässrige Phase überführt und zu einer Elektrolyszelle transportiert. In dieser erfolgte die Elektrodeposition auf eine bandförmige Elektrode aus Nickel oder palladiniertem Nickel. Nach der Abscheidung wurde das Band zu einer Detektorphalanx gezogen, wo der -Zerfall der neutronenarmen Isotope registriert wurde. Es wurden charakteristische Größen wie die Abscheidegeschwindigkeit und die Gesamtausbeute der Elektrolyse ermittelt. Das System wurde im Dauerbetrieb getestet. Es konnte gezeigt werden, dass der gewählte Aufbau prinzipiell für die Abscheidung von kurzlebigen, am Beschleuniger erzeugten Isotopen geeignet ist. Damit ist eine wichtige Voraussetzung für den zukünftigen Einsatz der Methode zum Studium der chemischen Eigenschaften der superschweren Elemente geschaffen.

Sea Level Variations from Decades to Millennia: A few Case Studies

The main goals of this Ph.D. study are to investigate the regional and global geophysical components related to present polar ice melting and to provide independent cross validation checks of GIA models using both geophysical data detected by satellite mission, and geological observations from far field sites, in order to determine a lower and upper bound of uncertainty of GIA effect. The subject of this Thesis is the sea level change from decades to millennia scale. Within ice2sea collaboration, we developed a Fortran numerical code to analyze the local short-term sea level change and vertical deformation resulting from the loss of ice mass. This method is used to investigate polar regions: Greenland and Antarctica. We have used mass balance based on ICESat data for Greenland ice sheet and a plausible mass balance for Antarctic ice sheet. We have determined the regional and global fingerprint of sea level variations, vertical deformations of the solid surface of the Earth and variations of shape of the geoid for each ice source mentioned above. The coastal areas are affected by the long wavelength component of GIA process. Hence understanding the response of the Earth to loading is crucial in various contexts. Based on the hypothesis that Earth mantle materials obey to a linear rheology, and that the physical parameters of this rheology can be only characterized by their depth dependence, we investigate the Glacial Isostatic Effect upon the far field sites of Mediterranean area using an improved SELEN program. We presented new and revised observations for archaeological fish tanks located along the Tyrrhenian and Adriatic coast of Italy and new RSL for the SE Tunisia. Spatial and temporal variations of the Holocene sea levels studied in central Italy and Tunisia, provided important constraints on the melting history of the major ice sheets.

Synthese und Charakterisierung von Oxidchalkogeniden und Bronzen für die Nanostrukturierung

Ausgehend von der Entdeckung der reversiblen Strukturierung mittels Rastersondenmethoden im Phasensystem Na2O/V2O5/P2O5 wurden im Rahmen dieser Arbeit zwei Ansatzpunkte verfolgt. Einerseits sollten mittels der Schmelzflußelektrolyse einige bereits existierende niederdimensionale Molybdänbronzen mit bekannten elektronischen Übergängen in ausreichend großen Kristallen gezüchtet werden, um sie auf ihre Strukturierungseigenschaften hin zu untersuchen. Gleichzeitig sollte durch Variation versucht werden, neue, bisher unbekannte Bronzen oder reduzierte Oxide zu synthetisieren und charakterisieren. Der zweite Schwerpunkt dieser Arbeit lag in der Synthese und Charakterisierung von Oxidchalkogeniden, bestehend aus einem Seltenerdmetall und einem 3d-Metall von Titan bis hin zu den mittleren Übergangsmetallen. Diese Verbindungen können durch die Kombination der jeweiligen Eigenschaften der oxidischen und chalkogeniden Teilstrukturen völlig neue elektronische und/oder magnetische Eigenschaften aufweisen. Mögliche auftretende Phasenübergänge sind wiederum für Strukturierungsversuche interessant. Die zu den Oxidchalkogeniden durchgeführten Untersuchungen ergaben im Phasensystem Ln/Ti/S/O (Ln = Lanthanoide) insgesamt sechs Verbindungen. Zwei von ihnen, La8Ti9S24O4 und Nd20Ti11S44O6, besitzen als gemeinsames Strukturelement tetranukleare [Ti4(u4-S)2(u2-O)4]-Cluster, bestehend aus vier miteinander über gemeinsame Flächen kondensierte TiS4O2-Oktaeder. Die Titanpositionen innerhalb der Cluster sind mit Ti+3-Ionen besetzt. Beide Verbindungen weisen in einem Temperaturbereich zwischen 150 K und 250 K eine deutlich ausgeprägte Hysterese der magnetischen Suszeptibilität auf, die sich im Falle von La8Ti9S24O4 auf einen Jahn-Teller-Übergang zurückführen läßt. Daneben konnte erstmals eine Serie oxidisch/sulfidisch gemischter Ruddlesden-Popper-Verbindungen mit Ln2Ti2S2O5 (Ln = Pr, Nd, Sm) synthetisiert und charakterisiert werden. Titan liegt als vierwertiges Ion in aus TiSO5-Oktaedern gebildeten Perowskit-Doppelschichten vor. Die neunfach koordinierten Positionen sind mit den Seltenerdmetallionen gefüllt, die zwölffach koordinierten Lagen sind unbesetzt. Bei dem sechsten erhaltene Titanoxidsulfid, La4TiS6.5O1.5, handelt es sich um einen Halbleiter mit einer Bandlücke von etwa 2 eV. Weiterhin gelang es, die Serie Ln2M3S2O8 (Ln = La, Ce, Pr, Nd, Sm; M = Nb, Ta) zu synthetisieren und in ihren physikalischen Eigenschaften zu charakterisieren. Es handelt sich ausnahmslos um Halbleiter mit Bandlücken zwischen E=0.125 eV für La2Nb3S2O8 und E=0.222 eV für Pr2Ta3S2O8. Die Struktur der Oxidsulfide Ce2Ta3S2O8, Pr2Ta3S2O8, Nd2Nb3S2O8 sowie Sm2Ta3S2O8 weist im Gegensatz zu den anderen Verbindungen eine Fehlordnung eines der beiden kristallographisch unabhängigen Nb- bzw. Ta-Atome auf. Daraus resultiert eine Symmetrieerniedrigung von Pnma zu Pbam. Der Einsatz von Europium führte zu einer neuen Modifikation des bronzoiden Oxids EuTa2O6, in der das Europium als Eu+2 vorliegt, wie 151Eu-Mößbauer-Untersuchungen bestätigten. Vor der Durchführung der Kristallzüchtungen mittels der Schmelzflußelektrolysen mußten die benutzen Öfen und Elektrolysezellen geplant und angefertigt werden. Es konnten dann verschiedene blaue, rote und violette Moybdänbronzen (sowie La2Mo2O7) in Kristallen bis zu 25 mm Länge dargestellt werden. Ferner gelang die erste exakte Einkristalluntersuchung der roten Bronze Rb0.33MoO3. Sie verfügt über die höchste d-Elektronen-Lokalisierungsrate aller bekannten roten Bronzen. Die erhaltenen Bronzen wurden teilweise von der Arbeitsgruppe Fuchs, Physikalisches Institut der Westfälischen Wilhelms-Universität Münster, auf ihre Nanostrukturierbarkeit hin untersucht. Dabei ergaben sich zwei verschiedene Strukturierungsmechanismen. Sind es im Fall der blauen Alkalimetall-Molybdänbronzen ausschließlich Lochstrukturen, die entstehen, handelt es sich bei La2Mo2O7 um Hügelstrukturen. Mittels der Schmelzflußelektrolyse konnte auch das gemischtvalente Alkalimetall-Eisenmolybdat NaFe2(MoO4)3 synthetisiert werden. Daneben gelang die Synthese dreier weiterer Alkalimetall-Eisenmolybdate: Cs2Fe2(MoO4)3, NaFe4(MoO4)5 und CsFe5(MoO4)7. Bis auf Cs2Fe2(MoO4)3, welches in der bekannten Langbeinit-Struktur kristallisiert, handelt es sich bei den übrigen Alkalimetall-Eisenmolybdaten um völlig neuartige Käfigverbindungen, bzw. bei CsFe5(MoO4)7 um eine Tunnelverbindung. Die Kristallstrukturen beinhalten kondensierte FeO6-Oktaeder. Im Fall von NaFe2(MoO4)3 lassen sich [Fe2O10]-Einheiten, für NaFe4(MoO4)5 [Fe2O10]- sowie [Fe3O14]-Einheiten, und für CsFe5(MoO4)7 [Fe4O18]-Baueinheiten beobachten. Die Positionen der Fe+2- und Fe+3-Atome in NaFe4(MoO4)5 wurden mit Hilfe einer 57Fe-Mößbauer-Untersuchung bestimmt.

Electrosynthesis and characterization of structured catalysts

In this research work the optimization of the electrochemical system of LDHs as catalytic precursors on FeCrAlY foams was carried out. Preliminary sintheses were performed on flat surfaces in order to easily characterize the deposited material. From the study of pH evolution vs time at different cathodic potentials applied to a Pt electrode, the theoretical best working conditions for the synthesis of single hydroxides and LDH compounds was achieved. In order to define the optimal potential for the synthesis of a particular LDH compound, the collected data were compared with the interval of precipitation determined by titration with NaOH. However, the characterization of the deposited material on Pt surfaces did not confirm the deposition of a pure and homogeneous LDH phase during the synthesis. Instead a sequential deposition linked to the pH of precipitation of the involved elements is observed. The same behavior was observed during the synthesis of the RhMgAl LDH on FeCrAlY foam as catalytic precursor. Several parameters were considered in order to optimize the synthesis.. The development of electrochemical cells with different feature, such as the counter electrode dimensions or the contact between the foam and the potentiostat, had been carried out in order to obtain a better coating of the foam. The influence of the initial pH of the electrolyte solution, of the applied potential, of the composition of the electrolytic solution were investigated in order to improve a better coating of the catalyst support. Catalytic tests were performed after the calcination of the deposited foam for the CPO and SR reactions, showing an improve of performances along with optimization of the precursors synthesis conditions.