A study visit to a vitual company

To integrate study visits to different workplaces in higher education implies important benefits for the course quality. The study visit gives the students a better understanding for the real situations they will meet in working life. However for practical and economical reasons is that not always possible. The purpose of this project is to create a virtual company that shall replace the real one for study visits. The goal is to create a realistic picture and that intended use of it can come as close as possible to a real study visit. It is also important to facilitate linking theory and practice. The virtual company is built up by pictures, videos and text. All material is made available on a web page and when entering the students will meet a layout of the company. From that position is it possible to walk around and look at videos from different workstations. Besides that can they also listen to interviews with managers and representatives of staff as well as reading reports concerning productivity and the work environment. The focus of the study visit is work sciences, therefore the material also include some visualized information about work hazards. On the web page there are also a number of tasks for the students to carry out. Until the autumn 2011, 132 students at Dalarna University have visited and produced reports from the virtual company. They were studying in programs for mechanical engineering, production technicians and human resource management. An evaluation among some ten students showed that the study visit to the virtual company is flexible in time and effective, but that students wish to have even more detailed information about the company. Experiences from four years of use in a number of classes show that the concept is worth further development. Furthermore with production of new material the concept is likely to be applicable for other purposes.

Use of Photovoltaic on an E-bike? : A Feasibility Study

In recent years the number of bicycles with e-motors has been increased steadily. Within the pedelec – bikes where an e-motor supports the pedaling – a special group of transportation bikes has developed. These bikes have storage boxes in addition to the basic parts of a bike. Due to the space available on top of those boxes it is possible to install a PV system to generate electricity which could be used to recharge the battery of the pedelec. Such a system would lead to grid independent charging of the battery and to the possibility of an increased range of motor support. The feasibility of such a PV system is investigated for a three wheeled pedelec delivered by the company BABBOE NORDIC.The measured data of the electricity generation of this mobile system is compared to the possible electricity generation of a stationary system.To measure the consumption of the pedelec different tracks are covered, and the energy which is necessary to recharge the bike battery is measured using an energy logger. This recharge energy is used as an indirect measure of the electricity consumption. A PV prototype system is installed on the bike. It is a simple PV stand alone system consisting of PV panel, charge controller with MPP tracker and a solar battery. This system has the task to generate as much electricity as possible. The produced PV current and voltage aremeasured and documented using a data logger. Afterwards the average PV power is calculated. To compare the produced electricity of the on-bike system to that of a stationary system, the irradiance on the latter is measured simultaneously. Due to partial shadings on the on-bike PV panel, which are caused by the driver and some other bike parts, the average power output during riding the bike is very low. It is too low to support the motor directly. In case of a similar installation as the PV prototype system and the intention always to park the bike on a sunny spot an on-bike system could generate electricity to at least partly recharge a bike battery during one day. The stationary PV system using the same PV panel could have produced between 1.25 and 8.1 times as much as the on-bike PV system. Even though the investigation is done for a very specific case it can be concluded that anon-bike PV system, using similar components as in the investigation, is not feasible to recharge the battery of a pedelec in an appropriate manner. The biggest barrier is that partial shadings on the PV panel, which can be hardly avoided during operation and parking, result in a significant reduction of generated electricity. Also the installation of the on-bike PV system would lead to increased weight of the whole bike and the need for space which is reducing the storage capacity. To use solar energy for recharging a bike battery an indirect way is giving better results. In this case a stationary PV stand alone system is used which is located in a sunny spot without shadings and adjusted to use the maximum available solar energy. The battery of the bike is charged using the corresponding charger and an inverter which provides AC power using the captured solar energy.

Electricity Supply Solutions for an Educational Center in Tanzania

The aim of this study was to investigate electricity supply solutions for an educationalcenter that is being built in Chonyonyo Tanzania. Off-grid power generation solutions andfurther optimization possibilities were studied for the case.The study was done for Engineers Without Borders in Sweden. Who are working withMavuno Project on the educational center. The school is set to start operating in year 2015with 40 girl students in the beginning. The educational center will help to improve genderequality by offering high quality education in a safe environment for girls in rural area.It is important for the system to be economically and environmentally sustainable. Thearea has great potential for photovoltaic power generation. Thus PV was considered as theprimary power generation and a diesel generator as a reliable backup. The system sizeoptimization was done with HOMER. For the simulations HOMER required componentdata, weather data and load data. Common components were chose with standardproperties, the loads were based on load estimations from year 2011 and the weather datawas acquired from NASA database. The system size optimization result for this base casewas a system with 26 kW PW; 5.5 kW diesel generator, 15 kW converter and 112 T-105batteries. The initial cost of the system was 55 875 €, the total net present cost 92 121 €and the levelized cost of electricity 0.264 €/kWh.In addition three optimization possibilities were studied. First it was studied how thesystem should be designed and how it would affect the system size to have night loads(security lights) use DC and could the system then be extended in blocks. As a result it wasfound out that the system size could be decreased as the inverter losses would be avoided.Also the system extension in blocks was found to be possible. The second study was aboutinverter stacking where multiple inverters can work as one unit. This type of connectionallows only the required number of inverters to run while shutting down the excess ones.This would allow the converter-unit to run with higher efficiency and lower powerconsumption could be achieved. In future with higher loads the system could be easilyextendable by connecting more inverters either in parallel or series depending on what isneeded. Multiple inverters would also offer higher reliability than using one centralizedinverter. The third study examined how the choice of location for a centralized powergeneration affects the cable sizing for the system. As a result it was found that centralizedpower generation should be located close to high loads in order to avoid long runs of thickcables. Future loads should also be considered when choosing the location. For theeducational center the potential locations for centralized power generation were found outto be close to the school buildings and close to the dormitories.

Combined solar and pellet heating systems for single-family houses : How to achieve decreased electricity usage, increased system efficiency and increased solar gains

In Sweden, there are about 0.5 million single-family houses that are heated by electricity alone, and rising electricity costs force the conversion to other heating sources such as heat pumps and wood pellet heating systems. Pellet heating systems for single-family houses are currently a strongly growing market. Future lack of wood fuels is possible even in Sweden, and combining wood pellet heating with solar heating will help to save the bio-fuel resources. The objectives of this thesis are to investigate how the electrically heated single-family houses can be converted to pellet and solar heating systems, and how the annual efficiency and solar gains can be increased in such systems. The possible reduction of CO-emissions by combining pellet heating with solar heating has also been investigated. Systems with pellet stoves (both with and without a water jacket), pellet boilers and solar heating have been simulated. Different system concepts have been compared in order to investigate the most promising solutions. Modifications in system design and control strategies have been carried out in order to increase the system efficiency and the solar gains. Possibilities for increasing the solar gains have been limited to investigation of DHW-units for hot water production and the use of hot water for heating of dishwashers and washing machines via a heat exchanger instead of electricity (heat-fed appliances). Computer models of pellet stoves, boilers, DHW-units and heat-fed appliances have been developed and the parameters for the models have been identified from measurements on real components. The conformity between the models and the measurements has been checked. The systems with wood pellet stoves have been simulated in three different multi-zone buildings, simulated in detail with heat distribution through door openings between the zones. For the other simulations, either a single-zone house model or a load file has been used. Simulations were carried out for Stockholm, Sweden, but for the simulations with heat-fed machines also for Miami, USA. The foremost result of this thesis is the increased understanding of the dynamic operation of combined pellet and solar heating systems for single-family houses. The results show that electricity savings and annual system efficiency is strongly affected by the system design and the control strategy. Large reductions in pellet consumption are possible by combining pellet boilers with solar heating (a reduction larger than the solar gains if the system is properly designed). In addition, large reductions in carbon monoxide emissions are possible. To achieve these reductions it is required that the hot water production and the connection of the radiator circuit is moved to a well insulated, solar heated buffer store so that the boiler can be turned off during the periods when the solar collectors cover the heating demand. The amount of electricity replaced using systems with pellet stoves is very dependant on the house plan, the system design, if internal doors are open or closed and the comfort requirements. Proper system design and control strategies are crucial to obtain high electricity savings and high comfort with pellet stove systems. The investigated technologies for increasing the solar gains (DHW-units and heat-fed appliances) significantly increase the solar gains, but for the heat-fed appliances the market introduction is difficult due to the limited financial savings and the need for a new heat distribution system. The applications closest to market introduction could be for communal laundries and for use in sunny climates where the dominating part of the heat can be covered by solar heating. The DHW-unit is economical but competes with the internal finned-tube heat exchanger which is the totally dominating technology for hot water preparation in solar combisystems for single-family houses.

The role of entrepreneurial networking on internationalization of a micro-sized Born Global Swedish fashion company : A narrative ethnographic research

Background: In recent studies a lot of attention is drawn to the connection between networking and entrepreneurship. Many scholars consider successful business and networking inseparable. Taking into consideration the topicality of the two notions discussed above the authors of this thesis decided to conduct the research dedicated to these phenomena in the field that interests them most – in the field of Swedish fashion. Purpose: The purpose of the thesis is to gain a deeper insight into entrepreneur’s experiences to point out the role of entrepreneurial networking in the process of internationalization of a micro-sized Swedish fashion company and to contribute to the research in this field by telling its unique story. Method: To achieve the purpose of the research a narrative ethnographic research was conducted. This research strategy was chosen because it suits the purpose best by giving an opportunity to get fresh insights into the field of entrepreneurial networking from the point of view of the entrepreneur. The data collected has a narrative nature therefore narrative analysis is used to present it. The methods of gathering the data are face-to-face interview and documents. Conclusion: we can define the most important role of entrepreneurial networking on the internationalization process of Odeur as an effective accelerator and a tool to fulfil the knowledge and expertise gaps in certain areas through other actors in the network.

System Integration of PV/T Collectors in Solar Cooling Systems

The demand for cooling and air-conditioning of building is increasingly ever growing. This increase is mostly due to population and economic growth in developing countries, and also desire for a higher quality of thermal comfort. Increase in the use of conventional cooling systems results in larger carbon footprint and more greenhouse gases considering their higher electricity consumption, and it occasionally creates peaks in electricity demand from power supply grid. Solar energy as a renewable energy source is an alternative to drive the cooling machines since the cooling load is generally high when solar radiation is high. This thesis examines the performance of PV/T solar collector manufactured by Solarus company in a solar cooling system for an office building in Dubai, New Delhi, Los Angeles and Cape Town. The study is carried out by analyzing climate data and the requirements for thermal comfort in office buildings. Cooling systems strongly depend on weather conditions and local climate. Cooling load of buildings depend on many parameters such as ambient temperature, indoor comfort temperature, solar gain to the building and internal gains including; number of occupant and electrical devices. The simulations were carried out by selecting a suitable thermally driven chiller and modeling it with PV/T solar collector in Polysun software. Fractional primary energy saving and solar fraction were introduced as key figures of the project to evaluate the performance of cooling system. Several parametric studies and simulations were determined according to PV/T aperture area and hot water storage tank volume. The fractional primary energy saving analysis revealed that thermally driven chillers, particularly adsorption chillers are not suitable to be utilizing in small size of solar cooling systems in hot and tropic climates such as Dubai and New Delhi. Adsorption chillers require more thermal energy to meet the cooling load in hot and dry climates. The adsorption chillers operate in their full capacity and in higher coefficient of performance when they run in a moderate climate since they can properly reject the exhaust heat. The simulation results also indicated that PV/T solar collector have higher efficiency in warmer climates, however it requires a larger size of PV/T collectors to supply the thermally driven chillers for providing cooling in hot climates. Therefore using an electrical chiller as backup gives much better results in terms of primary energy savings, since PV/T electrical production also can be used for backup electrical chiller in a net metering mechanism.

Pricing and competition in the Swedish retail market for electricity

Sweden, together with Norway, Finland and Denmark, have created a multi-national electricity market called NordPool. In this market, producers and retailers of electricity can buy and sell electricity, and the retailers then offers this electricity to end consumers such as households and industries. Previous studies have shown that pricing at the NordPool market is functioning quite well, but no other study has to my knowledge studied if pricing in the retail market to consumers in Sweden is well functioning. If the market is well functioning, with competition and low transaction costs when changing electricity retailer, we would expect that a homogeneous good such as electricity would be sold at the approximately same price, and that price changes would be highly correlated, in this market. Thus, the aim of this study is to test whether the price of Vattenfall, the largest energy firm in the Swedish market, is highly correlated to the price of other firms in the Swedish retail market for electricity. Descriptive statistics indicate that the price offered by Vattenfall is quite similar to the price of other firms in the market. In addition, regression analysis show that the correlation between the price of Vattenfall and other firms is as high as 0.98.

Identity and image – the story of expertise in a manufacturing company

This thesis is an investigation on the corporate identity of the firm SSAB from a managerial viewpoint (1), the company communication through press releases (2), and the image of the company as portrayed in news press articles (3). The managerial view of the corporate identity is researched through interviews with a communication manager of SSAB (1), the corporate communication is researched through press releases from the company (2) and the image is researched in news press articles (3). The results have been deducted using content analysis. The three dimensions are compared in order to see if the topics are coherent. This work builds on earlier research in corporate identity and image research, stakeholder theory, corporate communication and media reputation theory. This is interesting to research as the image of the company framed by the media affects, among other things, the possibility for the company to attract new talent and employees. If there are different stories, or topics, told in the three dimensions then the future employees may not share the view of the company with the managers in it. The analysis show that there is a discrepancy between the topics on the three dimensions, both between the corporate identity and the communication through press releases, as well as between the communication through press releases and the image in news press articles.

Ed Tilin, Specialist Product Service, General Electric Company

Ed Tilin a graduate of the New York Trade School's Advanced Television program is pictured here as part of the General Electric Company. Original caption reads, "Ed Tilin - Advanced Television 1954, joined G.E. in 1956 and has risen rapidly. He now supervises all television product service, product training and consumer relations activities for the New York district. He is a member of the exemtive [sic] board of CETA (Certified Electronic Technicians Association). Black and white photograph with original caption glued to reverse.

Dennis Mahoney, Electrician, Consolidated Edison Company, New York

A graduate of the New York Trade School's Electrical program in 1958, Dennis Mahoney is show at work for the Consolidated Edison Company in New York. Caption written on reverse reads "Dennis J. Mahoney is shown closing the Armature Switch of a Rotary Converter in a D.C. substation. The average rotary in our stations has a capacity of 4,200 K.W. and there are 30 such stations in Manhattan with an annual output of 800,000 amperes. Although the D.C. load is gradually being reduced, it can be seen that there is still considerable demand for direct current in Manhattan." Black and white photograph.

Benefícios fiscais nas importações executadas pelas Trading Company e as Comerciais Exportadoras pelos estados do Espírito Santo e Santa Catarina versus o fomento à exportação brasileira

Dissertação apresentada ao Programa de Pós – Graduação em Administração da Universidade Municipal de São Caetano do Sul como requisito parcial para obtenção do titulo de Mestre em Administração.

A Light, investimento estrangeiro no Brasil: uma luz sobre o ciclo privado-público-privado em 80 anos pela análise de taxa de retorno

A Brazilian Traction, Light and Power Company ("Light"), formada por empreendedores canadenses em 1899, operou por 80 anos praticamente toda a infraestrutura (bondes, luz, telefones, gás) do eixo Rio-São Paulo. A empresa passou por vários ciclos políticos, desde sua fundação até sua estatização em 1979. Durante este período de 80 anos, a infra-estrutura nacional, inicialmente privada, foi gradativamente passando para as mãos do Estado. O setor voltaria a ser privado a partir dos anos 90, configurando o ciclo privado-público-privado, similar ao ocorrido nos países mais desenvolvidos. A Light, símbolo maior do capital estrangeiro até os anos 50, foi inicialmente bem recebida no país, posto que seu desenvolvimento era simbiótico, causa e conseqüência, ao desenvolvimento industrial. Dos anos 20 em diante, crescem os debates econômicos ou ideológicos quanto ao papel do capital privado estrangeiro no desenvolvimento nacional, vis-a-vis a opção do setor público como ator principal. Sempre permaneceu sob névoa quais teriam sido os lucros da Light no Brasil, e se esses seriam excessivos, acima do razoável. Outra questão recorrente se refere até que ponto os congelamentos de tarifas teriam contribuido para a crise de oferta de infra-estrutura. Através de um trabalho de pesquisa em fontes primárias, esta dissertação procura reconstituir a história da Light, sob um foco de Taxa de Retorno sob o capital investido. Foi reconstruída a história financeira da Light no Brasil, a partir da qual calculou-se, para vários períodos e para os seus 80 anos de vida, os retornos obtidos pelos acionistas da empresa. A partir dos resultados obtidos, e utilizando-se de benchmarks comparativos, foi possível mostrar que: i) ao contrário da crença vigente à época, o retorno obtido pelo maior investidor estrangeiro no setor de infra-estrutura do Brasil do Séc. XX, se mostrou bem abaixo do mínimo aceitável, e ii) o represamento de tarifas, por várias décadas, foi de fato determinante para o subdesenvolvimento do setor de infra-estrutura no Brasil.

Relations between regulation, competition policy and consumer protection in telecommunications, electricity and water supply

The purpose of this article is to discuss the relations between regulation, competition policy and consumer protection these relations in three key sectors of Brazil’s infrastructure: telecommunications, electricity and water supply. A study of the literature points to two general principles. First, the need for consumer protection depends on the “degree of sovereignty” enjoyed by consumers, defined in terms of the cost of consumer organization, consumers’ ability to evaluate services, and the level of competition in each sector. Second, the less sovereignty consumers enjoy the more consumer protection institutions are involved with regulation agencies. The evidence for the Brazilian case apparently corroborates these points. In addition, it is important to stress that consumer complaints in regulated sectors seem to have increased more intensely than in others. The article is divided into three sections. Section 1 presents theoretical elements and aspects of the relations between regulation, competition policy and consumer protection evidenced by international experience. Section 2 analyzes the Brazilian experience and in particular the available statistics on consumer complaints about telecommunications, electricity and water supply, submitted to Fundação Procon-SP during the nineties. The last section points to possible configurations of the institutional relations between competition policy, regulation and consumer protection, showing how the existing configuration of these areas in the three infrastructure sectors discussed confirms that the theoretical framework proposed has reasonable predictive power.