Medium access control design for distributed opportunistic radio networks

Existing wireless networks are characterized by a fixed spectrum assignment policy. However, the scarcity of available spectrum and its inefficient usage demands for a new communication paradigm to exploit the existing spectrum opportunistically. Future Cognitive Radio (CR) devices should be able to sense unoccupied spectrum and will allow the deployment of real opportunistic networks. Still, traditional Physical (PHY) and Medium Access Control (MAC) protocols are not suitable for this new type of networks because they are optimized to operate over fixed assigned frequency bands. Therefore, novel PHY-MAC cross-layer protocols should be developed to cope with the specific features of opportunistic networks. This thesis is mainly focused on the design and evaluation of MAC protocols for Decentralized Cognitive Radio Networks (DCRNs). It starts with a characterization of the spectrum sensing framework based on the Energy-Based Sensing (EBS) technique considering multiple scenarios. Then, guided by the sensing results obtained by the aforementioned technique, we present two novel decentralized CR MAC schemes: the first one designed to operate in single-channel scenarios and the second one to be used in multichannel scenarios. Analytical models for the network goodput, packet service time and individual transmission probability are derived and used to compute the performance of both protocols. Simulation results assess the accuracy of the analytical models as well as the benefits of the proposed CR MAC schemes.

A systematic methodology to analyse the performance and design configurations of business interoperability in cooperative industrial networks

This thesis proposes a methodology for modelling business interoperability in a context of cooperative industrial networks. The purpose is to develop a methodology that enables the design of cooperative industrial network platforms that are able to deliver business interoperability and the analysis of its impact on the performance of these platforms. To achieve the proposed objective, two modelling tools have been employed: the Axiomatic Design Theory for the design of interoperable platforms; and Agent-Based Simulation for the analysis of the impact of business interoperability. The sequence of the application of the two modelling tools depends on the scenario under analysis, i.e. whether the cooperative industrial network platform exists or not. If the cooperative industrial network platform does not exist, the methodology suggests first the application of the Axiomatic Design Theory to design different configurations of interoperable cooperative industrial network platforms, and then the use of Agent-Based Simulation to analyse or predict the business interoperability and operational performance of the designed configurations. Otherwise, one should start by analysing the performance of the existing platform and based on the achieved results, decide whether it is necessary to redesign it or not. If the redesign is needed, simulation is once again used to predict the performance of the redesigned platform. To explain how those two modelling tools can be applied in practice, a theoretical modelling framework, a theoretical Axiomatic Design model and a theoretical Agent-Based Simulation model are proposed. To demonstrate the applicability of the proposed methodology and/or to validate the proposed theoretical models, a case study regarding a Portuguese Reverse Logistics cooperative network (Valorpneu network) and a case study regarding a Portuguese construction project (Dam Baixo Sabor network) are presented. The findings of the application of the proposed methodology to these two case studies suggest that indeed the Axiomatic Design Theory can effectively contribute in the design of interoperable cooperative industrial network platforms and that Agent-Based Simulation provides an effective set of tools for analysing the impact of business interoperability on the performance of those platforms. However, these conclusions cannot be generalised as only two case studies have been carried out. In terms of relevance to theory, this is the first time that the network effect is addressed in the analysis of the impact of business interoperability on the performance of networked companies and also the first time that a holistic approach is proposed to design interoperable cooperative industrial network platforms. Regarding the practical implications, the proposed methodology is intended to provide industrial managers a management tool that can guide them easily, and in practical and systematic way, in the design of configurations of interoperable cooperative industrial network platforms and/or in the analysis of the impact of business interoperability on the performance of their companies and the networks where their companies operate.

The burden of chronic low back pain in the adult Portuguese population : an epidemiological population-based study under the scope of Epireumapt

RESUMO: Nos países desenvolvidos a lombalgia é a condição músculo-­‐esquelética mais prevalente. Quando evolui para um quadro crónico é responsável por um encargo económico bastante considerável, não só em relação aos indivíduos, mas também para a sociedade. A lombalgia crónica é por isso uma das principais causas de perda de produtividade e de perda de independência económica, nomeadamente através do absenteísmo (ausência do trabalho), do presenteísmo (perda de produtividade no trabalho, devido à capacidade diminuída provocada pela lombalgia) e da incapacidade para trabalhar (invalidez permanente, total ou parcial). Até à data, em Portugal, a prevalência e carga social da lombalgia crónica eram desconhecidas. Até agora não existiam estudos populacionais de grande dimensão sobre este tema. O objetivo principal desta tese foi determinar a prevalência de lombalgia crónica, e também avaliar a carga social que esta tem na população adulta Portuguesa. O trabalho de investigação foi desenvolvido no âmbito do Estudo Epidemiológico de Doenças Reumáticas em Portugal (EpiReumaPt). Este foi o primeiro estudo de larga escala e de base populacional, que determinou a prevalência de doenças reumáticas e músculo-­‐ esqueléticas na população adulta portuguesa. Foi realizado numa amostra aleatória e representativa, de 10.661 indivíduos do Continente, da Região Autónoma dos Açores e da Região Autónoma da Madeira, entre Setembro de 2011 e Dezembro de 2013. Esta tese foi dividida em duas secções. A primeira secção incluiu o detalhe das questões relativas ao desenvolvimento e gestão do EpiReumaPt, constituindo-­‐se como um guia prático sobre como realizar um estudo de base populacional de larga escala, em Portugal. A metodologia detalhada do EpiReumaPt foi também descrita nesta secção e incluiu os objectivos, o desenho do estudo, as características de recrutamento e a preparação de dados para análise. Nesta secção foram ainda descritos os principais resultados do EpiReumaPt. Estes evidenciaram que a lombalgia foi a condição músculo-­‐esquelética com maior prevalência na população adulta portuguesa.A segunda secção desta tese estimou a prevalência da lombalgia crónica ativa na população adulta Portuguesa, e avaliou a carga social esta condição. A lombalgia ativa foi definida com base na dor auto-­‐relatada no dia da entrevista e que persistia há pelo menos 90 dias (independentemente da causa). A lombalgia foi definida como dor na área definida entre a margem inferior das décimas segundas costelas até às pregas glúteas inferiores, com ou sem dor nos membros inferiores. A carga social foi medida tendo em conta os seguintes parâmetros: qualidade de vida, função, consumo de recursos de saúde, consumo de analgésicos e outros fármacos usados no alívio da dor, sintomas de ansiedade e sintomas de depressão. Os resultados mostraram que o consumo de recursos em saúde e a carga social da lombalgia crónica na população adulta Português é significativa. Também a incapacidade causada pela lombalgia crónica,nos indivíduos com idade ativa, é responsável por elevadas taxas de absenteísmo e má qualidade de vida, aos quais acresce o consequente ónus socioeconómico. Esta tese também concluiu que o consumo de analgésicos e outros medicamentos para alívio da dor, na população adulta portuguesa com lombalgia crónica ativa, é relativamente baixa. A maioria destes indivíduos não tomava nenhum medicamento analgésico, independentemente da intensidade da dor. Mesmo os indivíduos que reportaram dor intensa, apenas 4.0% estavam no primeiro degrau da escada analgésica da Organização Mundial de Saúde; 2.3% usavam opióides fracos e 0.03% usavam opióides fortes para controlar a dor (segundo e terceiro degrau da escada analgésica da Organização Mundial da Saúde). O trabalho de investigação também confirmou que a prevalência de sintomas de ansiedade e depressão entre os indivíduos adultos portugueses com lombalgia crónica ativa é elevada. Nestes indivíduos, registou-­‐se um consumo mais elevado de analgésicos e outros medicamentos para alívio da dor, quando comparados com os indivíduos com lombalgia crónica activa sem esses sintomas psicológicos. Os grupos terapêuticos mais utilizados foram os ansiolíticos, sedativos e hipnóticos, os antidepressivos e os anti-­‐inflamatórios não esteróides. A intensidade média da dor reportada foi também maior entre os indivíduos com lombalgia ativa e sintomas de ansiedade e/ou depressão. Também nestes, foi reportada pior função e pior estado de saúde. Em relação ao consumo de recursos de saúde foram encontradas diferenças significativas entre as duas populações: os indivíduos com lombalgia ativa e sintomas psicológicos concomitantes registaram maior número de consultas de psiquiatria de outras especialidades médicas, assim como precisaram de mais apoio domiciliário nos 12 meses prévios à entrevista do EpiReumaPt. Foram também identificados os fatores associados a sintomas isolados de ansiedade, a sintomas isolados de depressão e a sintomas de ansiedade e depressão. Resumindo,esta tese permitiu concluir que a lombalgia crónica é um problema de saúde comum na população adulta portuguesa, contribuindo para um elevado grau de incapacidade e que consequentemente afeta o desempenho laboral e o bem-­‐estar dos indivíduos. A lombalgia crónica é também responsável por um consumo considerável de recursos de saúde. Acresce ainda que os sintomas de ansiedade e depressão são comuns, entre os indivíduos com lombalgia crónica, contribuindo com uma carga social adicional.---------------------------------- ABSTRACT:Low Back Pain(LBP) is the most prevalent of musculoskeletal condition in developed countries.When it becomes chronic, LBP causesan enormous economic burden on individuals and society -­‐ it is one of the leading causes of loss of productivity and economic independence through absenteeism (time off work), presenteeism (lost productivity because of diminished capacity while at work) and work disability (permanent, partial or complete disablement for work purposes). In Portugal the prevalence and burden of LBP and chronic LBP (CLBP) were poorly defined. Until now no large population-­‐based studies have focused on this. The main aim of this thesis was to determine the prevalence of LBP and CLBP, and also to assess the burden of CLBP in the adult rtuguese population. The research work was developed under the scope of EpiReumaPt (the Portuguese Epidemiologic Study of Rheumatic Diseases). EpiReumaPt was the first national large population-­‐based and prevalence study of rheumatic and musculoskeletal diseases (RMD). It was performed among a randomized and representative sample of 10,661 adult Portuguese subjects recruited in Mainland, Azores and Madeira Islands, from September 2011 to December 2013. The first section of this thesis included detailed issues regarding the development and management of EpiReumaPt, and provided a practical guide on how to set-­‐up a large population-­‐based study in Portugal. The detailed methodology of EpiReumaPt, including its objectives,study design,recruitment features,and data preparation for analyses were also described. The main results from EpiReumaPt study were provided in this section and showed that LBP was the musculoskeletal condition with highest prevalence among Portuguese population. The second section of this thesis estimated the prevalence of active CLBP among adult Portuguese population, and assessed the social burden of this condition. Active CLBP was defined based on self-­‐reported pain on the day of the interview, and for most of the time for at least 90 days (independently from cause). LBP was defined as pain in the back area from the lower margin of the twelfth ribs to he lower gluteal folds, with or without pain referred to the lower limbs. Social burden was measured taking into account the following outcomes: quality of life, function, healthcare resources consumption, analgesic and other pain relief drugs intake, anxiety and depression symptoms. Results showed that the healthcare consumption and social burden of CLBP among adult Portuguese population were enormous, and the disability caused by CLBP among subjects in a working age provides high rates of absenteeism (work loss) and poor quality of life, with a consequent socioeconomic burden. This thesis also concluded that analgesic and other pain relief drugs untake among adult Portuguese population with active CLBP was very low. Most of the subjects with active CLBP did not take any analgesic drug regardless pain severity. Even when subjects self-­‐reported severe pain, only 24.0% were in the 1st step of the analgesic ladder,2.3% used weak analgesic opioids and 0.03% used strong opioids (2nd and 3rd step of WHO analgesic ladder, respectively) to control pain . The research work also confirmed that the prevalence of anxiety and depression symptoms among adult Portuguese subjects with active CLBP was high. Regarding pharmacological therapy, the intake of analgesic and other pain relief drugs was higher among subjects with anxiety and/or depression symptoms, when compared with subjects without these psychological symptoms. Anxiolytics, sedatives and hypnotics, antidepressants and NSAIDs intake had higher usage rates among these subjects. The pain severity mean was also higher among this subjects and function and health status was worse. Regarding healthcare resources consumption,significant differences between the two populations were found. Subjects with ctive CLBP and concomitant psychological symptoms had a higher number of psychiatrist and other physician visits. They also needed more home care in the previous 12 months. Factors associated with isolated symptoms of anxiety, depression,and concomitant anxiety and depression symptoms were also identified. Summarizing, we concluded that CLBP is a common health problem among adult Portuguese population contributing to disability and affecting labor performance, and the well being of subjects. it is also responsible for considerable healthcare resource consumption. Anxiety and depression symptoms are common among subjects with CLBP and provided an additional burden among them.

Frequency-domain receiver design for doubly-selective channels

This work is devoted to the broadband wireless transmission techniques, which are serious candidates to be implemented in future broadband wireless and cellular systems, aiming at providing high and reliable data transmission and concomitantly high mobility. In order to cope with doubly-selective channels, receiver structures based on OFDM and SC-FDE block transmission techniques, are proposed, which allow cost-effective implementations, using FFT-based signal processing. The first subject to be addressed is the impact of the number of multipath components, and the diversity order, on the asymptotic performance of OFDM and SC-FDE, in uncoded and for different channel coding schemes. The obtained results show that the number of relevant separable multipath components is a key element that influences the performance of OFDM and SC-FDE schemes. Then, the improved estimation and detection performance of OFDM-based broadcasting systems, is introduced employing SFN (Single Frequency Network) operation. An initial coarse channel is obtained with resort to low-power training sequences estimation, and an iterative receiver with joint detection and channel estimation is presented. The achieved results have shown very good performance, close to that with perfect channel estimation. The next topic is related to SFN systems, devoting special attention to time-distortion effects inherent to these networks. Typically, the SFN broadcast wireless systems employ OFDM schemes to cope with severely time-dispersive channels. However, frequency errors, due to CFO, compromises the orthogonality between subcarriers. As an alternative approach, the possibility of using SC-FDE schemes (characterized by reduced envelope fluctuations and higher robustness to carrier frequency errors) is evaluated, and a technique, employing joint CFO estimation and compensation over the severe time-distortion effects, is proposed. Finally, broadband mobile wireless systems, in which the relative motion between the transmitter and receiver induces Doppler shift which is different or each propagation path, is considered, depending on the angle of incidence of that path in relation to the direction of travel. This represents a severe impairment in wireless digital communications systems, since that multipath propagation combined with the Doppler effects, lead to drastic and unpredictable fluctuations of the envelope of the received signal, severely affecting the detection performance. The channel variations due this effect are very difficult to estimate and compensate. In this work we propose a set of SC-FDE iterative receivers implementing efficient estimation and tracking techniques. The performance results show that the proposed receivers have very good performance, even in the presence of significant Doppler spread between the different groups of multipath components.

Implementation of a probabilistic based framework for safety assessment of existing timber elements

The assessment of existing timber structures is often limited to information obtained from non or semi destructive testing, as mechanical testing is in many cases not possible due to its destructive nature. Therefore, the available data provides only an indirect measurement of the reference mechanical properties of timber elements, often obtained through empirical based correlations. Moreover, the data must result from the combination of different tests, as to provide a reliable source of information for a structural analysis. Even if general guidelines are available for each typology of testing, there is still a need for a global methodology allowing to combine information from different sources and infer upon that information in a decision process. In this scope, the present work presents the implementation of a probabilistic based framework for safety assessment of existing timber elements. This methodology combines information gathered in different scales and follows a probabilistic framework allowing for the structural assessment of existing timber elements with possibility of inference and updating of its mechanical properties, through Bayesian methods. The probabilistic based framework is based in four main steps: (i) scale of information; (ii) measurement data; (iii) probability assignment; and (iv) structural analysis. In this work, the proposed methodology is implemented in a case study. Data was obtained through a multi-scale experimental campaign made to old chestnut timber beams accounting correlations of non and semi-destructive tests with mechanical properties. Finally, different inference scenarios are discussed aiming at the characterization of the safety level of the elements.

Acellular Gellan-gum based bilayered structures for the regeneration of osteochondral defects: a preclinical study

 In orthopaedics, the management and treatment of osteochondral (OC) defects remains an ongoing clinical challenge. Autologous osteochondral mosaicplasty has been used as a valid option for OC treatments although donor site morbidity remains a source of concern [1]. Engineering a whole structure capable of mimicking different tissues (cartilage and subchondral bone) in an integrated manner could be a possible approach to regenerate OC defects. In our group we have been proposing the use of bilayered structures to regenerate osteochondral defects [2,3]. The present study aims to investigate the pre-clinical performance of bilayered hydrogels and spongy-like hydrogels in in vivo  models (mice and rabbit, respectively), in both subcutaneous and orthotopic models. The bilayered structures were produced from Low Acyl Gellan Gum (LAGG) from Sigma-Aldrich, USA. Cartilage-like layers were obtained from a 2wt% LAGG solution. The bone-like layers were made of 2wt% LAGG with incorporation of hydroxyapatite at 20% and 30% (w/v). Hydrogels and spongy-like were subcutaneouly implanted in mice to evaluate the inflammatory response. Then, OC defects were induced in rabbit knee to create a critical size defect (4 mm diameter and 5 mm depth), and then hydrogels and sponges implanted. Both structures followed different processing methods. The hydrogels were injected allowing in situ  crosslinking. Unlike, the spongy-like were pre-formed by freeze-drying. The studies concerning subcutaneous implantation and critical size OC defect were performed for 2 and 4 weeks time, respectively. Cellular behavior and inflammatory responses were assessed by means of histology staining and biochemical function and matrix deposition by immunohistochemistry. Additionally, both OC structures stability and new cartilage and bone formation were evaluated by using vivo- computed tomography (Scanco 80). The results showed no acute inflammatory response for both approaches. New tissue formation and integration in the adjacent tissues were also observed, which present different characteristic behaviors when comparing hydrogels and sponges response. As future insights, a novel strategy for regeneration of OC defects can be designed encompassing both, hydrogels and spongy-like structures and cellular approaches. References: 1. Espregueira-Mendes J. et al. Osteochondral transplantation using autografts from the upper tibio-fibular joint for the treatment of knee cartilage lesions. Knee Surgery, Sports Traumatology, Arthroscopy 20,1136, 2012. 2. Oliveira JM. et al, Novel hydroxyapatite/chitosan bilayered scaffold for osteochondral tissue-engineering applications: Scaffold design and its performance when seeded with goat bone marrow stromal cells. Biomaterials 27, 6123, 2006. 3. Pereira D R. et al. Gellan Gum-Based Hydrogel Bilayered Scaffolds for Osteochondral Tissue Engineering. Key Engineering Materials 587, 255, 2013.

A GIS extension model to calculate urban heat island intensity based on urban geometry

This paper presents a simulation model, which was incorporated into a Geographic Information System (GIS), in order to calculate the maximum intensity of urban heat islands based on urban geometry data. The method-ology of this study stands on a theoretical-numerical basis (Okeâ s model), followed by the study and selection of existing GIS tools, the design of the calculation model, the incorporation of the resulting algorithm into the GIS platform and the application of the tool, developed as exemplification. The developed tool will help researchers to simulate UHI in different urban scenarios.

Assessment of the effectiveness of steel fibre reinforcement for the punching resistance of flat slabs by experimental research and design approach

The present paper deals with the experimental assessment of the effectiveness of steel fibre reinforcement in terms of punching resistance of centrically loaded flat slabs, and to the development of an analytical model capable of predicting the punching behaviour of this type of structures. For this purpose, eight slabs of 2550 x 2550 x 150 mm3 dimensions were tested up to failure, by investigating the influence of the content of steel fibres (0, 60, 75 and 90 kg/m3) and concrete strength class (50 and 70 MPa). Two reference slabs without fibre reinforcement, one for each concrete strength class, and one slab for each fibre content and each strength class compose the experimental program. All slabs were flexurally reinforced with a grid of ribbed steel bars in a percentage to assure punching failure mode for the reference slabs. Hooked ends steel fibres provided the unique shear reinforcement. The results have revealed that steel fibres are very effective in converting brittle punching failure into ductile flexural failure, by increasing both the ultimate load and deflection, as long as adequate fibre reinforcement is assured. An analytical model was developed based on the most recent concepts proposed by the fib Mode Code 2010 for predicting the punching resistance of flat slabs and for the characterization of the behaviour of fibre reinforced concrete. The most refined version of this model was capable of predicting the punching resistance of the tested slabs with excellent accuracy and coefficient of variation of about 5%.

A performance-based method for seismic evaluation of masonry walls strengthened with RC layers

A conventional method for seismic strengthening of masonry walls is externally application of reinforced concrete layer (shotcrete). However, due to the lack of analytical and experimental information on the behavior of strengthened walls, the design procedures are usually followed based on the empirical relations. Using these design procedures have resulted in massive strengthening details in retrofitting projects. This paper presents a computational framework for nonlinear analysis of strengthened masonry walls and its versatility has been verified by comparing the numerical and experimental results. Based on the developed numerical model and available experimental information, design relations and failure modes are proposed for strengthened walls in accordance with the ASCE 41 standard. Finally, a sample masonry structure has been strengthened using the proposed and available conventional methods. It has been shown that using the proposed method results in lower strengthening details and appropriate (ductile) failure modes

Systematic design analysis and risk management on engineered nanoparticles occupational exposure

The production of nanotechnology-based products is increasing, along with the conscience of the possible harmful effects of some nanomaterials. The “safety-by-design” approaches are getting attention as helpful tools to develop safer products and production processes. The Systematic Design Analysis Approach could help to identify the solutions to control the workplace risks by defining the emission and exposure scenarios and the possible barriers to interrupt them. By applying this approach in a photocatalytic ceramic tiles development project it was possible to identify relevant nanoparticles emission scenarios and related barriers, and defining possible ways to reduce it.

Validação de design de armazém automatizado com uso de simulação discreta

Dissertação de mestrado em Engenharia de Sistemas

Using the GPU to design complex profile extrusion dies

In the present work the benefits of using graphics processing units (GPU) to aid the design of complex geometry profile extrusion dies, are studied. For that purpose, a3Dfinite volume based code that employs unstructured meshes to solve and couple the continuity, momentum and energy conservation equations governing the fluid flow, together with aconstitutive equation, was used. To evaluate the possibility of reducing the calculation time spent on the numerical calculations, the numerical code was parallelized in the GPU, using asimple programing approach without complex memory manipulations. For verificationpurposes, simulations were performed for three benchmark problems: Poiseuille flow, lid-driven cavity flow and flow around acylinder. Subsequently, the code was used on the design of two real life extrusion dies for the production of a medical catheter and a wood plastic composite decking profile. To evaluate the benefits, the results obtained with the GPU parallelized code were compared, in terms of speedup, with a serial implementation of the same code, that traditionally runs on the central processing unit (CPU). The results obtained show that, even with the simple parallelization approach employed, it was possible to obtain a significant reduction of the computation times.

Algorithms and tools for in silico design of cell factories

PhD thesis in Bioengineering

Gamification e game-based learning: uma abordagem lúdica à aprendizagem

Relatório de estágio de mestrado em Ensino de Informática

Using OpenFOAM to aid the design of complex profile extrusion dies

[Extrat] Thermoplastic profiles are very attractive due to their inherent design freedom. However, the usual methodologies employed to design extrusion forming tools, based on experimental based trial–and–error procedures, are highly dependent on the designer’s experience and lead to high resources consumption. Despite of the relatively low cost of the raw materials employed on the production of this type of profiles, the resources involved in the die design process significantly increase their cost. These difficulties are even more evident when a complex geometry profile has to be produced and there is no previous experience with similar geometries. Therefore, novel design approaches are required, in order to reduce the required resources and guarantee a good performance for the produced profile. (...)