Logic cells as basic structures to add/drop WDM information signals

Nowadays, in order to take advantage of fiber optic bandwidth, any optical communications system tends to be WDM. The way to extract a channel, characterized by a wavelength, from the optical fiber is to filter the specific wavelength. This gives the systems a low degree of freedom due to the fact of the static character of most of the employed devices. In this paper we will present a different way to extract channels from an optical fiber with WDM transmission. The employed method is based on an Optically Programmable Logic Cells (OPLC) previously published by us, for other applications as a chaotic generator or as basic element for optical computing. In this paper we will describe the configuration of the OPLC to be employed as a dropping device. It acts as a filter because it will extract the data carried by a concrete wavelength. It does depend, internally, on the wavelength. We will show how the intensity of the signal is able to select the chosen information from the line. It will be also demonstrated that a new idea of redundant information it is the way of selecting the concrete wavelength. As a matter of fact this idea is apparently the only way to use the OPLC as a dropping device. Moreover, based on these concepts, a similar way to route signals to different routes is reported. The basis is the use of photonic switching configurations, namely Batcher or Bayan structures, where the unit switching cells are the above indicated OPLCs.

Boolean logic device done with DFB laser diode

We present simulation results on how power output-input characteristic Instability in Distributed FeedBack -DFB semiconductor laser diode SLA can be employed to implemented Boolean logic device. Two configurations of DFB Laser diode under external optical injection, either in the transmission or in the reflective mode of operation, is used to implement different Optical Logic Cells (OLCs), called the Q- and the P-Device OLCs. The external optical injection correspond to two inputs data plus a cw control signal that allows to choose the Boolean logic function to be implement. DFB laser diode parameters are choosing to obtain an output-input characteristic with the values desired. The desired values are mainly the on-off contrast and switching power, conforming shape of hysteretic cycle. Two DFB lasers in cascade, one working in transmission operation and the other one in reflective operation, allows designing an inputoutput characteristic based on the same respond of a self-electrooptic effect device is obtained. Input power for a bit'T' is 35 uW(70uW) and a bit "0" is zero for all the Boolean function to be execute. Device control signal range to choose the logic function is 0-140 uW (280 uW). Q-device (P-device)

Running away from side effects: physical exercise as a complementary intervention for breast cancer patients

The number of breast cancer survivors increases every year, thanks to the development of new treatments and screening techniques. However, patients present with numerous side effects that may affect their quality of life. Exercise has been demostrated to reduce some of these side effects, but in spite of this, few breast cancer patientes know and follow the exercise recommendations needed to remain healthy. In this review, we describe the differente breast cancer treatments and the related side effects and implications of exercise in relation to these. We propose that exercise could be and integrative complementary intervention to improve physiological, physical and psychological factors that affect survival and quality of life of these patients. For that reason, the main objective of this review is to provide a general overview of exercise benefits in breast cancer patients and recommendations of how to design exercise interventions in patients with different side effects.

Towards an abstract domain for resource analysis of logic programs using sized types

We present a novel general resource analysis for logic programs based on sized types.Sized types are representations that incorporate structural (shape) information and allow expressing both lower and upper bounds on the size of a set of terms and their subterms at any position and depth. They also allow relating the sizes of terms and subterms occurring at different argument positions in logic predicates. Using these sized types, the resource analysis can infer both lower and upper bounds on the resources used by all the procedures in a program as functions on input term (and subterm) sizes, overcoming limitations of existing analyses and enhancing their precision. Our new resource analysis has been developed within the abstract interpretation framework, as an extension of the sized types abstract domain, and has been integrated into the Ciao preprocessor, CiaoPP. The abstract domain operations are integrated with the setting up and solving of recurrence equations for both, inferring size and resource usage functions. We show that the analysis is an improvement over the previous resource analysis present in CiaoPP and compares well in power to state of the art systems.

Sized Type Analysis for Logic Programs (Technical Communication)

We present a novel analysis for relating the sizes of terms and subterms occurring at diferent argument positions in logic predicates. We extend and enrich the concept of sized type as a representation that incorporates structural (shape) information and allows expressing both lower and upper bounds on the size of a set of terms and their subterms at any position and depth. For example, expressing bounds on the length of lists of numbers, together with bounds on the values of all of their elements. The analysis is developed using abstract interpretation and the novel abstract operations are based on setting up and solving recurrence relations between sized types. It has been integrated, together with novel resource usage and cardinality analyses, in the abstract interpretation framework in the Ciao preprocessor, CiaoPP, in order to assess both the accuracy of the new size analysis and its usefulness in the resource usage estimation application. We show that the proposed sized types are a substantial improvement over the previous size analyses present in CiaoPP, and also benefit the resource analysis considerably, allowing the inference of equal or better bounds than comparable state of the art systems.

UAS See-and-Avoid Strategy using a Fuzzy Logic Controller Optimized by Cross-Entropy in Scaling Factors and Membership Functions

This work aims to develop a novel Cross-Entropy (CE) optimization-based fuzzy controller for Unmanned Aerial Monocular Vision-IMU System (UAMVIS) to solve the seeand- avoid problem using its accurate autonomous localization information. The function of this fuzzy controller is regulating the heading of this system to avoid the obstacle, e.g. wall. In the Matlab Simulink-based training stages, the Scaling Factor (SF) is adjusted according to the specified task firstly, and then the Membership Function (MF) is tuned based on the optimized Scaling Factor to further improve the collison avoidance performance. After obtained the optimal SF and MF, 64% of rules has been reduced (from 125 rules to 45 rules), and a large number of real flight tests with a quadcopter have been done. The experimental results show that this approach precisely navigates the system to avoid the obstacle. To our best knowledge, this is the first work to present the optimized fuzzy controller for UAMVIS using Cross-Entropy method in Scaling Factors and Membership Functions optimization.

Resource usage analysis of logic programs via abstract interpretation using sized types

We present a novel general resource analysis for logic programs based on sized types. Sized types are representations that incorporate structural (shape) information and allow expressing both lower and upper bounds on the size of a set of terms and their subterms at any position and depth. They also allow relating the sizes of terms and subterms occurring at different argument positions in logic predicates. Using these sized types, the resource analysis can infer both lower and upper bounds on the resources used by all the procedures in a program as functions on input term (and subterm) sizes, overcoming limitations of existing resource analyses and enhancing their precision. Our new resource analysis has been developed within the abstract interpretation framework, as an extension of the sized types abstract domain, and has been integrated into the Ciao preprocessor, CiaoPP. The abstract domain operations are integrated with the setting up and solving of recurrence equations for inferring both size and resource usage functions. We show that the analysis is an improvement over the previous resource analysis present in CiaoPP and compares well in power to state of the art systems.

Automated end user-centred adaptation of web components through automated description logic-based reasoning

Context: This paper addresses one of the major end-user development (EUD) challenges, namely, how to pack today?s EUD support tools with composable elements. This would give end users better access to more components which they can use to build a solution tailored to their own needs. The success of later end-user software engineering (EUSE) activities largely depends on how many components each tool has and how adaptable components are to multiple problem domains. Objective: A system for automatically adapting heterogeneous components to a common development environment would offer a sizeable saving of time and resources within the EUD support tool construction process. This paper presents an automated adaptation system for transforming EUD components to a standard format. Method: This system is based on the use of description logic. Based on a generic UML2 data model, this description logic is able to check whether an end-user component can be transformed to this modeling language through subsumption or as an instance of the UML2 model. Besides it automatically finds a consistent, non-ambiguous and finite set of XSLT mappings to automatically prepare data in order to leverage the component as part of a tool that conforms to the target UML2 component model. Results: The proposed system has been successfully applied to components from four prominent EUD tools. These components were automatically converted to a standard format. In order to validate the proposed system, rich internet applications (RIA) used as an operational support system for operators at a large services company were developed using automatically adapted standard format components. These RIAs would be impossible to develop using each EUD tool separately. Conclusion: The positive results of applying our system for automatically adapting components from current tool catalogues are indicative of the system?s effectiveness. Use of this system could foster the growth of web EUD component catalogues, leveraging a vast ecosystem of user-centred SaaS to further current EUSE trends.

Un entendimiento infraestructural del proyecto arquitectónico

Un entendimiento infraestructural del proyecto arquitectónico Este trabajo de tesis reivindica la pertinencia de la lógica infraestructural como herramienta de proyecto arquitectónico en el territorio urbano contemporáneo, a través del relato del tránsito que se produce entre las décadas de 1960 y 1970 y el final del siglo XX, desde unos sistemas urbanos centrales, vectoriales y ‘modernos’ hacia unos sistemas policéntricos, organizados según modelos de campos y ‘contemporáneos’. Las infraestructuras han sido tradicionalmente objeto de interés para generaciones de arquitectos y urbanistas que, bien desde su condición plástica más pregnante, bien desde una intuición de su capacidad organizativa, han sido fascinados por la irrupción en el territorio de estos elementos generalmente ajenos al proyecto arquitectónico. Los proyectos que durante décadas han explorado la posibilidad de habitar estas grandes estructuras, o de proyectar con su lenguaje y su escala, han resultado en un acercamiento a la capacidad de lo infraestructural como herramienta de proyecto limitada a cuestiones morfotipológicas. Sin embargo, a partir de un estudio de la infraestructura ‘clásica’ como aquella resultado de la manifestación de las redes de abastecimiento y conectividad básicas, se desvela una naturaleza de lo infraestructural que trasciende su expresión formal conocida y explora su capacidad performativa, como sistema de relaciones, como orden topológico, como soporte flexible para la actividad espontánea y no anticipada. A partir del trabajo de diversos autores y de una selección de proyectos de distinta índole –la mayoría no construidos– se muestra cómo la irrupción de una conciencia relacional, así como la problemática moderna de afrontar los procesos de generación de una ‘nueva ciudad para una nueva sociedad’, motivan la búsqueda de sistemas de generación y control de ‘forma colectiva’ adecuados a un modelo urbano contemporáneo. Transitando por los escritos de Fumihiko Maki en Investigations in Collective Form, Reyner Banham en Megastructure, o Shadrach Woods en The Man in the Street durante los 60 y 70 y, más recientemente, de Stan Allen en Points + Lines, Edward Soja en Postmetropolis o Frei Otto en Occupying and Connecting, se traza esta historia semántica de lo infraestructural desde lo tipológico hasta una noción ampliada que resulta pertinente para operar en el territorio contemporáneo postmetropolitano. Para ello el trabajo plantea, por un lado, la descripción del contexto urbano que podemos asumir como contemporáneo, su evolución y sus características principales. Por otro lado, se explora la formación de esta noción de entendimiento infraestructural en las últimas décadas desde enfoques complementarios. Una introducción describe las condiciones de contexto en las que este estudio doctoral adquiere su pertinencia: el tránsito relativamente reciente desde un modelo vectorial y clásico de ocupación del territorio, al modelo contemporáneo disperso y policéntrico propio del modelo de campos. Un bloque central de tres capítulos analiza ‘lo infraestructural’ como expresión de una arquitectura de las relaciones, como soporte para una sociedad en cambio y como lógica proyectual, no ligada a una forma dada. La última parte, a modo de epílogo, describe el territorio urbano contemporáneo, sus cualidades básicas y la capacidad de las lógicas infraestructurales enunciadas en los capítulos anteriores para operar en él. Un último apartado de conclusiones, establece las bases de una línea de investigación abierta acerca de la operatividad actual de estos sistemas en el proyecto de arquitectura. ABSTRACT An infrastructural understanding of architectural design This thesis project claims for the suitability of infrastructural logics as a design tool within contemporary urban territories. This claim is illustrated by means of a report on the transit between the 60–70’s decades and the end of the 20th century, ranging from vector, central, ‘modern’ urban systems, towards polycentric ‘contemporary’ urban patterns, arranged following field models. Infrastructures have been traditionally on the spot for generations of architects and urban planners who, due to either their aesthetical condition, or an intuition of their organizational capacity, have been fascinated by the bursting of these elements in the territory. Projects which have explored the possibility to inhabit these huge structures, or to design with its language or scale for decades, have turned out to be always limited to morphological-typological issues. However, from the base of a research on ‘classic’ infrastructure –understood as the outcome of supplies and connectivity basic networks– a new nature of infrastructure is revealed, going beyond its known formal expression and exploring its potential to perform as a system of relationships, as a topological pattern, or as a flexible support for spontaneous and unanticipated activity. The breakthrough of a relational consciousness, as well as the modern concern about the generation of ‘a new city for a new society’ are shown, through the works of several authors and a selection of heterogeneous mostly-unbuilt projects. This semantic history of infrastructures, regarding not only typologies but also a broader concept able to operate in contemporary postmetropolitan territory, is drawn by following the paths of Fumihiko Maki in Investigations in Collective Form, Reyner Banham in Megastructure, or Shadrach Woods in The Man in the Street during the 60’s and 70’s and, lately, those of Stan Allen in Points + Lines, Edward Soja in Postmetropolis or Frei Otto in Occupying and Connecting. In order to do so, this thesis project sets, on one hand, a description of the urban context which can be assumed as contemporary, as well as its evolution and main features. On the other hand, complementary approaches help go deep into how this notion of infrastructural insight within the last decades has been created. An introduction describes the contextual conditions for this thesis project to become relevant: the relatively recent transit from a classic spatial occupation pattern, to the contemporary, disperse and polycentric pattern inherent to field models. A three-chapters core analyzes the infrastructures as the expression of an architecture of relations, as well as a support for a changing society and as a formless design logic. The last part, an epilogue, describes the urban contemporary territory and the suitability of the infrastructural logics to operate in it. A final conclusive section, lays the foundations for an open line of research on present functionality of these systems in architectural designs.

UAS See-and-Avoid Strategy using a Fuzzy Logic Controller Optimized by Cross-Entropy in Scaling Factors and Membership Functions.

This work aims to develop a novel Cross-Entropy (CE) optimization-based fuzzy controller for Unmanned Aerial Monocular Vision-IMU System (UAMVIS) to solve the seeand-avoid problem using its accurate autonomous localization information. The function of this fuzzy controller is regulating the heading of this system to avoid the obstacle, e.g. wall. In the Matlab Simulink-based training stages, the Scaling Factor (SF) is adjusted according to the specified task firstly, and then the Membership Function (MF) is tuned based on the optimized Scaling Factor to further improve the collison avoidance performance. After obtained the optimal SF and MF, 64% of rules has been reduced (from 125 rules to 45 rules), and a large number of real flight tests with a quadcopter have been done. The experimental results show that this approach precisely navigates the system to avoid the obstacle. To our best knowledge, this is the first work to present the optimized fuzzy controller for UAMVIS using Cross-Entropy method in Scaling Factors and Membership Functions optimization.

Extending the expressiveness of fuzzy logic languages

En el trabajo que aquí presentamos se incluye la base teórica (sintaxis y semántica) y una implementación de un framework para codificar el razonamiento de la representación difusa o borrosa del mundo (tal y como nosotros, seres humanos, entendemos éste). El interés en la realización de éste trabajo parte de dos fuentes: eliminar la complejidad existente cuando se realiza una implementación con un lenguaje de programación de los llamados de propósito general y proporcionar una herramienta lo suficientemente inteligente para dar respuestas de forma constructiva a consultas difusas o borrosas. El framework, RFuzzy, permite codificar reglas y consultas en una sintaxis muy cercana al lenguaje natural usado por los seres humanos para expresar sus pensamientos, pero es bastante más que eso. Permite representar conceptos muy interesantes, como fuzzificaciones (funciones usadas para convertir conceptos no difusos en difusos), valores por defecto (que se usan para devolver resultados un poco menos válidos que los que devolveríamos si tuviésemos la información necesaria para calcular los más válidos), similaridad entre atributos (característica que utilizamos para buscar aquellos individuos en la base de datos con una característica similar a la buscada), sinónimos o antónimos y, además, nos permite extender el numero de conectivas y modificadores (incluyendo modificadores de negación) que podemos usar en las reglas y consultas. La personalización de la definición de conceptos difusos (muy útil para lidiar con el carácter subjetivo de los conceptos borrosos, donde nos encontramos con que cualificar a alguien de “alto” depende de la altura de la persona que cualifica) es otra de las facilidades incluida. Además, RFuzzy implementa la semántica multi-adjunta. El interés en esta reside en que introduce la posibilidad de obtener la credibilidad de una regla a partir de un conjunto de datos y una regla dada y no solo el grado de satisfacción de una regla a partir de el universo modelado en nuestro programa. De esa forma podemos obtener automáticamente la credibilidad de una regla para una determinada situación. Aún cuando la contribución teórica de la tesis es interesante en si misma, especialmente la inclusión del modificador de negacion, sus multiples usos practicos lo son también. Entre los diferentes usos que se han dado al framework destacamos el reconocimiento de emociones, el control de robots, el control granular en computacion paralela/distribuída y las busquedas difusas o borrosas en bases de datos. ABSTRACT In this work we provide a theoretical basis (syntax and semantics) and a practical implementation of a framework for encoding the reasoning and the fuzzy representation of the world (as human beings understand it). The interest for this work comes from two sources: removing the existing complexity when doing it with a general purpose programming language (one developed without focusing in providing special constructions for representing fuzzy information) and providing a tool intelligent enough to answer, in a constructive way, expressive queries over conventional data. The framework, RFuzzy, allows to encode rules and queries in a syntax very close to the natural language used by human beings to express their thoughts, but it is more than that. It allows to encode very interesting concepts, as fuzzifications (functions to easily fuzzify crisp concepts), default values (used for providing results less adequate but still valid when the information needed to provide results is missing), similarity between attributes (used to search for individuals with a characteristic similar to the one we are looking for), synonyms or antonyms and it allows to extend the number of connectives and modifiers (even negation) we can use in the rules. The personalization of the definition of fuzzy concepts (very useful for dealing with the subjective character of fuzziness, in which a concept like tall depends on the height of the person performing the query) is another of the facilities included. Besides, RFuzzy implements the multi-adjoint semantics. The interest in them is that in addition to obtaining the grade of satisfaction of a consequent from a rule, its credibility and the grade of satisfaction of the antecedents we can determine from a set of data how much credibility we must assign to a rule to model the behaviour of the set of data. So, we can determine automatically the credibility of a rule for a particular situation. Although the theoretical contribution is interesting by itself, specially the inclusion of the negation modifier, the practical usage of it is equally important. Between the different uses given to the framework we highlight emotion recognition, robocup control, granularity control in parallel/distributed computing and flexible searches in databases.

The Balanced Cross-Layer Design Routing Algorithm in Wireless Sensor Networks Using Fuzzy Logic

Recently, the cross-layer design for the wireless sensor network communication protocol has become more and more important and popular. Considering the disadvantages of the traditional cross-layer routing algorithms, in this paper we propose a new fuzzy logic-based routing algorithm, named the Balanced Cross-layer Fuzzy Logic (BCFL) routing algorithm. In BCFL, we use the cross-layer parameters’ dispersion as the fuzzy logic inference system inputs. Moreover, we give each cross-layer parameter a dynamic weight according the value of the dispersion. For getting a balanced solution, the parameter whose dispersion is large will have small weight, and vice versa. In order to compare it with the traditional cross-layer routing algorithms, BCFL is evaluated through extensive simulations. The simulation results show that the new routing algorithm can handle the multiple constraints without increasing the complexity of the algorithm and can achieve the most balanced performance on selecting the next hop relay node. Moreover, the Balanced Cross-layer Fuzzy Logic routing algorithm can adapt to the dynamic changing of the network conditions and topology effectively.

La invención en la obra de Julio Lafuente: entre la utopía y la construcción

La obra de Julio Lafuente es extraordinariamente abundante y heterogenea, de un experimentalismo tan admirable en casos particulares como difícilmente caracterizable en su conjunto. El inventario ha revelado la existencia de más de 360 proyectos, de los que cerca de 200 están construidos, e incluye obras de arquitectura, urbanismo, escenografía y mobiliario, muchas de ellas reconocidas internacionalmente y profusamente publicadas entre 1950 y 1980. Es decir, nos encontramos ante un panorama de producción, divulgación y reconocimiento de su obra en el pasado reciente que contrasta con el actual desconocimiento de la misma. Situación que esta tesis doctoral pretende revertir. La investigación se articula en dos partes. La primera de ellas constituye el núcleo argumental y se compone de cuatro capítulos que permiten comprender el carácter de la obra de Julio Lafuente: su biografía profesional, una panorámica contextualizada de su obra, el estudio en profundidad de dos obras escogidas y la revisión transversal de los aspectos más relevantes en su arquitectura. Este primer volumen incluye dos capítulos adicionales: una bibliografía exhaustiva de sus obras y la traducción de publicaciones específicas coetáneas, recogidas en un anexo. La segunda parte consiste en una catalogación de la obra de Julio Lafuente, inexistente hasta la fecha, desarrollada por la autora en paralelo a su participación en la realización del Archivo de Julio Lafuente en Roma, lo que ha facilitado el acceso directo a la documentación original. Una revisión panorámica de diversas obras de Lafuente en relación con otras obras y corrientes de pensamiento coetáneas ha permitido comprender la pertenencia inequívoca de la obra de Julio Lafuente a su contexto: fundamentalmente, la Italia del período comprendido entre 1950 y 1980, un contexto del que se nutre y al que contribuye sin descanso. La mayor parte de la abundante obra arquitectónica de Lafuente se dedica al desarrollo de edificios de vivienda, normalmente construidos en los ensanches de Roma. En el conjunto de esta prolija trayectoria sobresalen, sin embargo, algunos logros extraordinarios que han permitido apoyar el desarrollo argumental de la investigación. Entre ellos, se han escogido para su estudio en profundidad dos obras —el hotel en la roca (1967), en Gozo (Malta) y el hipódromo de Tor di Valle (1959), en Roma—, que constituyen sendos casos singulares en los que Lafuente alcanza las cotas más altas de coherencia, significación y calidad arquitectónica, y que caracterizan el marco en el que se desarrolla la investigación: entre la utopía y la construcción. Al mismo tiempo, se trata de dos obras complementarias que llevan al extremo algunos de los aspectos a los que Julio Lafuente presta más atención en el conjunto de su obra, como la relación con el lugar, la invención estructural o el cuidado de los detalles constructivos. Estos rasgos se han revisado de un modo transversal en el último capítulo, incidiendo en algunos casos particulares que, a modo de metonimia, han permitido tomar la parte por el todo. La investigación confirma el compromiso de la obra de Lafuente con la lógica constructiva, si bien la componente idealizada se reconoce, aunque en un tono menor respecto al empeño constructivo, en una gran parte su arquitectura. Esta tendencia a la idealización es, posiblemente, una de las razones que ha llevado a quienes hasta hoy han escrito sobre su obra, a especular con las ideas de invención y utopía en la arquitectura de Julio Lafuente. El catálogo inédito de la obra de Julio Lafuente constituye la segunda parte de la tesis doctoral y permite realizar consultas posteriores que puedan dar continuidad a la investigación aquí iniciada. ABSTRACT The architectural work of Julio Lafuente is extraordinary wide and heterogeneous, of so admirable experimentalism in particular cases as difficult to be characterized as a whole. The inventory of his work has revealed the existence of more than 360 projects, of which about 200 are built, including works of architecture, urban planning, scenery and furniture, many of which were internationally recognized and widely published between 1950 and 1980. This overview of production, spread and recognition of his work in the recent past hugely contrasts with the current lack of knowledge of it. Situation that this PhD thesis aims to reverse. The thesis is divided into two parts. The first part is the core argument and comprises four sections that provide insights into the nature of the work of Julio Lafuente: professional biography, a contextualized view of his work, in-depth study of two selected works and cross review of the most relevant aspects in his architecture. This volume includes an exhaustive bibliography and translation of contemporaneous specific publications, incorporated in an annex. The second part consists of a catalog of the work of Julio Lafuente, non-existent to date, developed in parallel with the participation of the author in the making process of the Archive of Julio Lafuente in Rome, which has provided access to the original documentation. Research develops a wide-ranging approach to the architecture of Julio Lafuente in its context. To this purpose, various of his works have been reviewed in relation to other contemporary works, which have revealed a direct attachment of Lafuente’s work to its context: mainly Italy, for the period between 1950 and 1980. Most of his wide architectural work is related to housing projects, usually built in the extensions of Rome. In this broad regular work, however, highlight some outstanding achievements which have given support to the research argumental line. Among them, two works have been selected for an in-depth study: the hotel in the Maltese rock of Gozo (1967) and the Tor di Valle racecourse building (1959) in Rome. Both are individual cases in which Lafuente reaches the highest levels of coherence, significance and architectural quality, and both characterize the frame in which this research takes place: between utopia and construction. These selected projects are two complementary works that embody some of the aspects to which Julio Lafuente pays more attention, such as the experiencing of place, the structural invention or concern for construction details, among others. These features have been reviewed through a transversal regard in the last chapter, focusing on some particular cases, in the way in which metonymy is used, allowing to take the part for the whole. Research confirms that the work of Julio Lafuente stands out for its commitment to construction logic, while the idealized component is recognized, although in a minor key with respect to constructive engagement, in most of his architecture from the beginning to his latest proposals. This tendency to idealization is probably one of the reasons that has often led to those who have written about him, to speculate on the ideas of invention and utopia in the work of Julio Lafuente. The unpublished catalog of the work of Julio Lafuente, which constitutes the second part of the thesis, presents the architectural work of Julio Lafuente and allows further research that could continue the one started here.

Soundscape quality analysis by fuzzy logic: A field study in Cordoba, Argentina

This research studies urban soundscapes through the comparative analysis of twelve public open spaces in the city of Córdoba (Argentina), taken as case studies. The work aims to examine selection of indicators and assessment tools intended to characterize soundscape quality. The field study was carried out through surveys and acoustic and psychoacoustic indicators, that are used together to objectively describe the sound quality of urban spaces. The study shows that, while there is a relationship of these indicators with the sound quality of the spaces, this is not linear. Their relative importance or influence depends on the interrelations occurring between the parameters studied. A model analyzing and correlating the parameters with the sound quality, based on the postulates of fuzzy logic, was applied as a tool of analysis, and it was seen to achieve a very close approximation to the subjective or perceptual response of the inhabitants. This close match between the model results and the perceptual response of the users confirms the fuzzy model as an effective tool for the study, not only of soundscapes, but also for those situations in which objective parameters must be related to the perceptual response of users.

Mechanical separation of the complementary strands of DNA

We describe the mechanical separation of the two complementary strands of a single molecule of bacteriophage λ DNA. The 3′ and 5′ extremities on one end of the molecule are pulled progressively apart, and this leads to the opening of the double helix. The typical forces along the opening are in the range of 10–15 pN. The separation force signal is shown to be related to the local GC vs. AT content along the molecule. Variations of this content on a typical scale of 100–500 bases are presently detected.