Asymmetric sexual conflict over parental care in a biparental cichlid

Theoretical models predict that parents should adjust the amount of care both to their own and their partner's body condition. In most biparental species, parental duties are switched repeatedly allowing for repeated mutual adjustment of the amount of care. In the mouthbrooding cichlid Eretmodus cyanostictus, terms are switched only once with females taking the first share. The timing of the shift of the clutch between mates strongly determines both partners' brooding period and thereby their parental investment. Females signal their readiness to transfer the young several days before the male finally takes them, suggesting sexual conflict over the timing of the shift. In a lab experiment, we reduced the body condition of either the female or the male of a pair to test whether energy reserves affect the timing of the shift and whether female signalling behaviour depends on energetic state. Males with a lowered condition took the young later and incubated for a shorter period, which prolonged the incubation time of their female partners. When female condition was lowered, female and male incubation durations remained unchanged, although females signalled their readiness to shift more intensely. Our results suggest that males adjust their parental investment to own energy reserves but are unresponsive to their mate's condition. Females appear to carry the entire costs for the male's adjustment of care. We propose that intrinsic asymmetries in the scope for mutual adjustment of parental investment and the costs of negotiation crucially influence solutions of the conflict between sexes over care.

Performance evaluation and characterization of symmetric capacitors with carbon black, and asymmetric capacitors using a carbon foam supported nickel electrode

This thesis evaluates a novel asymmetric capacitor incorporating a carbon foam supported nickel hydroxide positive electrode and a carbon black negative electrode. A series of symmetric capacitors were prepared to characterize the carbon black (CB) negative electrode. The influence of the binder, PTFE, content on the cell properties was evaluated. X-ray diffraction characterization of the nickel electrode during cycling is also presented. The 3 wt% and 5 wt% PTFE/CB symmetric cells were examined using cyclic voltammetry (CV) and constant current charge/discharge measurements. As compared with symmetric cells containing more PTFE, the 3 wt% cell has the highest average specific capacitance, energy density and power density over 300 cycles, 121.8 F/g, 6.44 Wh/kg, and 604.1 W/kg, respectively. Over the 3 to 10 wt% PTFE/CB range, the 3 wt% sample exhibited the lowest effective resistance and the highest BET surface area. Three asymmetric cells (3 wt% PTFE/CB negative electrode and a nickel positive) were fabricated; cycle life was examined at 3 current densities. The highest average energy and power densities over 1000 cycles were 20 Wh/kg (21 mA/cm2) and 715 W/kg (31 mA/cm2), respectively. The longest cycle life was 11,505 cycles (at 8 mA/cm2), with an average efficiency of 79% and an average energy density of 14 Wh/kg. The XRD results demonstrate that the cathodically deposited nickel electrode is a typical α-Ni(OH)2 with the R3m structure (ABBCCA stacking); the charged electrodes are 3γ-NiOOH with the same stacking as the α-type; the discharged electrodes (including as-formed electrode) are aged to β’-Ni(OH)2 (a disordered β) with the P3m structure (ABAB stacking). A 3γ remnant was observed.

Synthesis of chiral ferrosalen ligands and their applications in asymmetric catalysis

A new series of chiral ferrosalen ligands was designed and synthesized. The special feature of the ferrosalen ligands is that the chirality originated from the planar chiral ferrocenyl structure. For most known salen ligands, chirality comes from central and axial chiral centers. The key building block for the construction of these ferrosalen ligands was synthesized stereoselectively by a chiral auxiliary approach. This approach does not consume any chiral material, and does not require chiral HPLC resolution. Using this method, nine ligands were prepared using ferrocene as the starting material. In addition, the steric hindrance was modulated by changing the cyclopentadienyl group to the more bulky pentamethylcyclopentadienyl- and pentaphenylcyclopentadienyl- groups. The structure of these ligands was established by 1H and 13C NMR. The structure of a ferrosalen-Cu (II) complex was determined by single crystal X-ray diffraction analysis. All the chiral ferrosalen ligands were tested in catalytic asymmetric reactions including enantioselective carbonyl-ene reaction, enantioselective Strecker-type reaction and enantioselective silylcyanation. For the carbonyl-ene reaction, up to 99% yield and 29% enantiomeric excess (ee) were obtained using ligand-Co (III) as the catalysts; For the Strecker-type reaction, a maximum of 20% ee was obtained using ligand-AlCl as the catalyst; For the silylcyanation reaction, up to 99% yield and 26% ee were obtained using ligand-AlCl as the catalyst.

Development and testing of an asymmetric capacitor with a nickel-carbon foam positive electrode

Electrochemical capacitors (ECs), also known as supercapacitors or ultracapacitors, are energy storage devices with properties between batteries and conventional capacitors. EC have evolved through several generations. The trend in EC is to combine a double-layer electrode with a battery-type electrode in an asymmetric capacitor configuration. The double-layer electrode is usually an activated carbon (AC) since it has high surface area, good conductivity, and relatively low cost. The battery-type electrode usually consists of PbO2 or Ni(OH)2. In this research, a graphitic carbon foam was impregnated with Co-substituted Ni(OH)2 using electrochemical deposition to serve as the positive electrode in the asymmetric capacitor. The purpose was to reduce the cost and weight of the ECs while maintaining or increasing capacitance and gravimetric energy storage density. The XRD result indicated that the nickel-carbon foam electrode was a typical α-Ni(OH)2. The specific capacitance of the nickel-carbon foam electrode was 2641 F/g at 5 mA/cm2, higher than the previously reported value of 2080 F/g for a 7.5% Al-substituted α-Ni(OH)2 electrode. Three different ACs (RP-20, YP-50F, and Ketjenblack EC-600JD) were evaluated through their morphology and electrochemical performance to determine their suitability for use in ECs. The study indicated that YP-50F demonstrated the better overall performance because of the combination of micropore and mesopore structures. Therefore, YP-50F was chosen to combine with the nickel-carbon foam electrode for further evaluation. Six cells with different mass ratios of negative to positive active mass were fabricated to study the electrochemical performance. Among the different mass ratios, the asymmetric capacitor with the mass ratio of 3.71 gave the highest specific energy and specific power, 24.5 W.h/kg and 498 W/kg, respectively.

Performance evaluation of a novel asymmetric capacitor using a light-weight, carbon foam supported nickel electrode

Electrochemical capacitors have been an important development in recent years in the field of energy storage. Capacitors can be developed by utilizing either double layer capacitance at the electrode/solution interfaces alone or in combination with a battery electrode associated with a faradic redox process in one electrode. An asymmetric capacitor consisting of electrochemically deposited nickel hydroxide, supported on carbon foam as a positive electrode and carbon sheet as a negative electrode has been successfully assembled and cycled. One objective of this study has been to demonstrate the viability of the nickel carbon foam positive electrode, especially in terms of cycle life. Electrochemical characterization shows stable, high cycle performance in 26 wt. % KOH electrolyte with a maximum energy density of 4.1 Wh/Kg and a relaxation time constant of 6.24 s. This cell has demonstrated high cycle life, 14,500 cycles, with efficiency better than 98%. In addition, the cell failure mechanism and self-discharge behavior of the aforesaid capacitor are analyzed.

Public preferences of the Great Lakes Environment : a Lake Michigan pilot study

The Great Lakes watershed is home to over 40 million people, and the health of the Great Lakes ecosystem is vital to the overall economic, societal, and environmental health of the U.S. and Canada. However, environmental issues related to them are sometimes overlooked. Policymakers and the public face the challenges of balancing economic benefits with the need to conserve and/or replenish regional natural resources to ensure long term prosperity. From the literature review, nine critical stressors of ecological services were delineated, which include pollution and contamination, agricultural erosion, non-native species, degraded recreational resources, loss of wetlands habitat, climate change, risk of clean water shortage, vanishing sand dunes, and population overcrowding; this list was validated through a series of stakeholder discussions and focus groups in Grand Rapids. Focus groups were conducted in Grand Rapids to examine the awareness of, concern with, and willingness to expend resources on these stressors. Stressors that the respondents have direct contact with tend to be the most important. The focus group results show that concern related to pollution and contamination is much higher than for any of the other stressors. Low responses to climate change result in recommendations for outreach programs.

Conformational preferences of natural and C3-modified epothilones in aqueous solution

The conformational properties of the microtubule-stabilizing agent epothilone A ( 1a) and its 3-deoxy and 3-deoxy-2,3-didehydro derivatives 2 and 3 have been investigated in aqueous solution by a combination of NMR spectroscopic methods, Monte Carlo conformational searches, and NAMFIS calculations. The tubulin-bound conformation of epothilone A ( 1a), as previously proposed on the basis of solution NMR data, was found to represent a significant fraction of the ensemble of conformations present for the free ligands in aqueous solution.

Tariff-Specific Preferences and Their Influence on Price Sensitivity

For many services, consumers can choose among a range of optional tariffs that differ in their access and usage prices. Recent studies indicate that tariff-specific preferences may lead consumers to choose a tariff that does not minimize their expected billing rate. This study analyzes how tariff-specific preferences influence the responsiveness of consumers’ usage and tariff choice to changes in price. We show that consumer heterogeneity in tariff-specific preferences leads to heterogeneity in their sensitivity to price changes. Specifically, consumers with tariff-specific preferences are less sensitive to price increases of their preferred tariff than other consumers. Our results provide an additional reason why firms should offer multiple tariffs rather than a uniform nonlinear pricing plan to extract maximum consumer surplus.

Exact Solutions to the Symmetric and Asymmetric Vehicle Routing Problem with Simultaneous Delivery and Pick-Up

In reverse logistics networks, products (e.g., bottles or containers) have to be transported from a depot to customer locations and, after use, from customer locations back to the depot. In order to operate economically beneficial, companies prefer a simultaneous delivery and pick-up service. The resulting Vehicle Routing Problem with Simultaneous Delivery and Pick-up (VRPSDP) is an operational problem, which has to be solved daily by many companies. We present two mixed-integer linear model formulations for the VRPSDP, namely a vehicle-flow and a commodity-flow model. In order to strengthen the models, domain-reducing preprocessing techniques, and effective cutting planes are outlined. Symmetric benchmark instances known from the literature as well as new asymmetric instances derived from real-world problems are solved to optimality using CPLEX 12.1.

Asymmetric Effects of Loss and Gain of a Floral Trait on Pollinator Preference

Shifts in pollination syndromes involve coordinated changes in multiple floral traits. This raises the question of how plants can cope with rapid changes in pollinator availability by the slow process of accumulation of mutations in multiple genes. Here we study the transition from bee to hawkmoth pollination in the genus Petunia. Interspecific crosses followed by single locus introgressions were used to recreate putative intermediate evolutionary stages in the evolution of moth pollination. The effect of the loss/gain of petal color was asymmetric: it had no influence on the established pollinator but enhanced visitation by the new pollinator. Therefore, shifts in pollination syndromes may proceed through intermediate stages of reduced specialization and consequently enhanced reproductive assurance. The loss of petal color in moth-pollinated Petunia involves null mutations in a single regulatory gene, An2. Such simple genetic changes may be sufficiently rapid and frequent to ensure survival during pollinator failure.

The Role of Online Platforms for Media Markets – Two‐Dimensional Spatial Competition in a Two‐Sided Market

We analyze the market for online and offline media in a model of two-dimensional spatial competition where media outlets sell content and advertising space. Consumer preferences are distributed along the style and type of news coverage where the distance costs may vary across dimensions. For integrated provision of online and offline platforms we show that entering the online market reduces average profits and may even constitute a prisoner's dilemma. Specialized provision may yield polarization in the style and type dimensions. This is in contrast to the maximum–minimum differentiation result previously established in the literature on multidimensional horizontal competition. We show that maximal differentiation in both dimensions occurs due to the discrete nature of the type dimension and asymmetric advertising markets.