Rapid detection and quantification of the marine toxic algae, Alexandrium minutum, using a super-paramagnetic immunochromatographic strip test

The dinoflagellates of Alexandrium genus are known to be producers of paralytic shellfish toxins that regularly impact the shellfish aquaculture industry and fisheries. Accurate detection of Alexandrium including A. minutum is crucial for environmental monitoring and sanitary issues. In this study, we firstly developed a quantitative lateral flow immunoassay (LFIA) using super-paramagnetic nanobeads for A. minutum whole cells. This dipstick assay relies on two distinct monoclonal antibodies used in a sandwich format and directed against surface antigens of this organism. No sample preparation is required. Either frozen or live cells can be detected and quantified. The specificity and sensitivity are assessed by using phytoplankton culture and field samples spiked with a known amount of cultured A. minutum cells. This LFIA is shown to be highly specific for A. minutum and able to detect reproducibly 105 cells/L within 30 min. The test is applied to environmental samples already characterized by light microscopy counting. No significant difference is observed between the cell densities obtained by these two methods. This handy super-paramagnetic lateral flow immnunoassay biosensor can greatly assist water quality monitoring programs as well as ecological research.

THE FEASIBILITY OF USING WEB-BASED TECHNOLOGY FOR THE MANAGEMENT OF DREDGING PROJECTS

The research investigates the feasibility of using web-based project management systems for dredging. To achieve this objective the research assessed both the positive and negative aspects of using web-based technology for the management of dredging projects. Information gained from literature review and prior investigations of dredging projects revealed that project performance, social, political, technical, and business aspects of the organization were important factors in deciding to use web-based systems for the management of dredging projects. These factors were used to develop the research assumptions. An exploratory case study methodology was used to gather the empirical evidence and perform the analysis. An operational prototype of the system was developed to help evaluate developmental and functional requirements, as well as the influence on performance, and on the organization. The evidence gathered from three case study projects, and from a survey of 31 experts, were used to validate the assumptions. Baselines, representing the assumptions, were created as a reference to assess the responses and qualitative measures. The deviation of the responses was used to evaluate for the analysis. Finally, the conclusions were assessed by validating the assumptions with the evidence, derived from the analysis. The research findings are as follows: 1. The system would help improve project performance. 2. Resistance to implementation may be experienced if the system is implemented. Therefore, resistance to implementation needs to be investigated further and more R&D work is needed in order to advance to the final design and implementation. 3. System may be divided into standalone modules in order to simplify the system and facilitate incremental changes. 4. The QA/QC conceptual approach used by this research needs to be redefined during future R&D to satisfy both owners and contractors. Yin (2009) Case Study Research Design and Methods was used to develop the research approach, design, data collection, and analysis. Markus (1983) Resistance Theory was used during the assumptions definition to predict potential problems to the implementation of web-based project management systems for the dredging industry. Keen (1981) incremental changes and facilitative approach tactics were used as basis to classify solutions, and how to overcome resistance to implementation of the web-based project management system. Davis (1989) Technology Acceptance Model (TAM) was used to assess the solutions needed to overcome the resistances to the implementation of web-base management systems for dredging projects.

Genetic variation in growth and wood-quality traits of Corymbia citriodora subsp. variegata across three sites in south-east Queensland, Australia

Ten growth or wood-quality traits were assessed in three nearby Corymbia citriodora subsp. variegata (CCV) open-pollinated family-within-provenance trials (18 provenances represented by a total of 374 families) to provide information for the development of a breeding program targeting both pulp and solid-wood products. Growth traits (diameter at breast high over bark [DBH], height and conical volume) were assessed at 3 and 7 years of age. Wood-quality traits (density [DEN], Kraft pulp yield [KPY], modulus of elasticity [MoE] and microfibril angle [MfA]) were predicted using near-infrared spectroscopy on wood samples collected from these trials when aged between 10 and 12 years. The high average KPY, DEN and MoE, and low average MfA observed indicates CCV is very suitable for both pulp and timber products. All traits were under moderate to strong genetic control. In across- trials analyses, high (>0.4) heritability estimates were observed for height, DEN, MoE and MfA, while moderate heritability estimates (0.24 to 0.34) were observed for DBH, volume and KPY. Most traits showed very low levels of genotype × site interaction. Estimated age–age genetic correlations for growth traits were strong at both the family (0.97) and provenance (0.99) levels. Relationships among traits (additive genetic correlation estimates) were favourable, with strong and positive estimates between growth traits (0.84 to 0.98), moderate and positive values between growth and wood-quality traits (0.32 to 0.68), moderate and positive between KPY and MoE (0.64), and high and positive between DEN and MoE (0.82). However, negative (but favourable) correlations were detected between MfA and all other evaluated traits (−0.31 to −0.96). The genetic correlation between the same trait expressed on two different sites, at family level, ranged from 0.24 to 0.42 for growth traits, and from 0.29 to 0.53 for wood traits. Therefore simultaneous genetic improvement of growth and wood property traits in CCV for the target environment in south-east Queensland should be possible, given the moderate to high estimates of heritability and favourable correlations amongst all traits studied, unless genotype × site interactions are greater than was evident. © 2016 NISC (Pty) Ltd

Detection of viral diseases in shrimp Litopenaeus vannamei in Iran with emphasis on white spot disease prevention by using marine alga extract

Nowadays, following was expanded shrimp breeding and culture; viral diseases have been main problem which threatened shrimp industry in the country. Therefore, shrimp samples were obtained from different stages of Litopenaeus vannmei life cycle (larval, post larval, juveniles, adults and broodstocks) based on clinical signs in the breeding center and shrimp farming from Bushehr, Khozestan and Sistan and Baluchestan provinces. Viral diseases were detected by PCR (Polymerase Chain Reaction), histopathology and transmission electron microscopy (TEM) methods. Results of the PCR were indicated present white spot virus (WSV) in juveniles, sub adults and adults shrimp with medium intensity from three provinces, but it was not showed in larval and post larval stages. Histopathological sections were indicated hypertrophy and basophilic Cowdry type A formation in nucleus cells of gill, haematopoietic, lymphoid and epithelial's cuticles and intestinal tissues which was associated with small vacuoles increased in B cells of hepatopancreas tissue of infection shrimps. Transmission electronic microscopic studies were demonstrated that the length and diameter virus was detected, respectively, 300 ± 20 nm and 75 ± 5 nm. Considerable, results of the PCR were only displayed IHHNV in juvenile, adult and broodstock shrimps from breeding and farming center of Bushehr province. The main lesion pathology was formed eosinophilic Cowdry type A in nucleus cells of gill, haematopoietic, lymphoid and epithelial's cuticles and intestinal tissues. Whereas penaeid shrimps are lack specific immune system, hence, in the present study was used of marine alga (Lurensia snideria) collected from along costal Persian Gulf of Bushehr province for viral diseases were prevented. Powder alga extract were added with a ratio of 1 % to shrimp diet. Total haemocyte count (THC) and total protein plasma (TPP) were increased after 5 days of oral administration diets. When shrimps were infected by with spot virus experimentally, THC and TPP gradually were increased in both two groups (shrimps fed with diet containing alga extract and without alga extract) after 48h. Nevertheless; THC, TPP and survival of shrimp fed with diet containing alga extract were more than shrimp control in 15 days. So, oral administration Lurensia snideria extract was capable prevention infected L. vannamei via stimulant specific immune system.

Manual de boas práticas ambientais para a indústria do mobiliário de madeira

Este trabalho tem como finalidade a elaboração de um projeto na área ambiental denominado Manual de Boas Práticas Ambientais para a Indústria do Mobiliário de Madeira. Para conseguir atingir o objetivo proposto, inicialmente foi efetuado um breve enquadramento ao subsetor do mobiliário de madeira a nível nacional, recorrendo à bibliografia disponível apoiada em dados estatísticos de suporte. Foram caracterizados os dois concelhos alvo de estudo, Paços de Ferreira e Paredes por apresentarem a maior concentração industrial no subsetor a nível nacional. Procedeu-se à descrição do processo produtivo da indústria do mobiliário de madeira com a identificação dos seus principais aspetos ambientais. Posteriormente foi aplicado um questionário para verificar como as empresas do subsetor nos concelhos alvo de estudo tratam as questões ambientais da sua atividade industrial. De forma complementar, realizou-se um caso de estudo na empresa IKEA Industry Portugal, Lda, onde foi elaborado um diagnóstico ambiental detalhado com incidência nas boas práticas ambientais. Finalmente foi elaborado o Manual de Boas Práticas Ambientais para a Indústria do Mobiliário de Madeira.

Industry wage survey.

Mode of access: Internet.

Enzymatic hydrolysis and fermentation of ultradispersed wood particles after ultrasonic pretreatment

Background: A study of the correlation between the particle size of lignocellulosic substrates and ultrasound pretreatment on the efficiency of further enzymatic hydrolysis and fermentation to ethanol. Results: Themaximumconcentrations of glucose and, to a lesser extent, di- and trisaccharideswere obtained in a series of experiments with 48-h enzymatic hydrolysis of pine rawmaterials ground at 380–400 rpm for 30min. The highest glucose yield was observed at the end of the hydrolysis with a cellulase dosage of 10 mg of protein (204 ± 21 units CMCase per g of sawdust). The greatest enzymatic hydrolysis efficiency was observed in a sample that combined two-stage grinding at 400 rpm with ultrasonic treatment for 5–10 min at a power of 10 W per kg of sawdust. The glucose yield in this case (35.5 g glucose l−1) increased twofold compared to ground substrate without further preparation. Conclusions: Using a mechanical two-stage grinding of lignocellulosic raw materials with ultrasonication increases the efficiency of subsequent enzymatic hydrolysis and fermentation.

Protection of white leg shrimp (Litopenaeus vannamei) against white spot disease virus using oral recombinant bioencapsulated VP28

Aquaculture, is perceived as having the greatest potential to meet the growing demand for aquatic food. Crustaceans form one of the main value added components in aquaculture and among them, shrimp aquaculture is the predominant one. Industrial shrimp fanning, in combination with poor management in shrimp aquaculture, has quickly led to severe pollution in shrimp ponds, thereby creating a suitable environment for development of bacterial and virus diseases. White spot disease is one of the most deadly diseases that are caused heavy loss in all Penaeid shrimps family. In Iran during 2002 to 2004 in the Kuzestan province and in 2005 in Bushehr province, the most ponds and farms infected with white spot and the entire industry was facing threat of closure. Owing to the impact of WSSV infection to shrimp aquaculture, there is an urgent need to develop suitable strategies to protect cultured shrimps and make aquaculture more sustainable. Therefore, this study aimed to examine the possibility of protecting shrimp against white spot syndrome virus using bioencapsulated Anemia with E. coil containing the recombinant protein VP28, designed. Virus genome was extracted from naturally infected Litopenaeus vannamei in the Choebdch farms and VP28 gene by designed primers was amplified, extracted, purified and cloned in E. coli TGI. Protein expression evaluated and inactivated bacteria containing recombinant protein encapsulated in Artemia nauplii. White shrimp post larvae stage 5 were fed for 5 days with recombinant nauplii and twice on days 7 and 25 after feeding with Artemia nauplii were challenged with white spot virus. The results of the first experiment revealed that cumulative mortality percent in the group receiving the bacteria containing recombinant plasmid (pMal + VP28) was %14.44±1.11 and the relative percent survival %80.30±1.51. In this group the mortality rates in the various repetitions varied from the 13.33% to 16.66% and relative percent survival of 77.27% to 81.81%. in the Non-recombinant plasmid group (pMal) Mean percent mortality was% 33.33±3.84 and the Relative Percent Survival %54.54±5.24 and in the group that received bacteria contained no recombinant plasmid the Mean cumulative mortality percent was%48.88 ± 5.87 and Relative Percent Survival%33.33± 8.01.

Wood-derived biomaterials for biomedical applications

Driven by the global trend in the sustainable economy development and environmental concerns, the exploring of plant-derived biomaterials or biocomposites for potential biomedical and/or pharmaceutical applications has received tremendous attention. Therefore, the work of this thesis is dedicated to high-value and high-efficiency utilization of plant-derived materials, with the focus on cellulose and hemicelluloses in the field of biomedical applications in a novel biorefinery concept. The residual cellulose of wood processing waste, sawdust, was converted into cellulose nanofibrils (CNFs) with tunable surface charge density and geometric size through 2,2,6,6-tetramethylpiperidinyloxy (TEMPO)-mediated oxidation and mechanical defibrillation. The sawdust-based CNFs and its resultant free-standing films showed comparable or even better mechanical properties than those from a commercial bleached kraft pulp at the same condition, demonstrating the feasibility of producing CNFs and films thereof with outstanding mechanical properties from birch sawdust by a process incorporated into a novel biorefinery platform recovering also polymeric hemicelluloses for other applications. Thus, it is providing an efficient route to upgrade sawdust waste to valuable products. The surface charge density and geometric size of the CNFs were found to play key roles in the stability of the CNF suspension, as well as the gelling properties, swelling behavior, mechanical stiffness, morphology and microscopic structural properties, and biocompatibility of CNF-based materials (i.e. films, hydrogels, and aerogels). The CNFs with tunable surface chemistry and geometric size was found promising applications as transparent and tough barrier materials or as reinforcing additive for production of biocomposites. The CNFs was also applied as structural matrices for the preparation of biocomposites possessing electrical conductivity and antimicrobial activity by in situ polymerization and coating of polypyrrole, and incorporation of silver nanoparticles, which make the material possible for potential wound healing application. The CNF-based matrices (films, hydrogels, and aerogels) with tunable structural and mechanical properties and biocompatibility were further prepared towards an application as 3D scaffolds in tissue engineering. The structural and mechanical strength of the CNF matrices could be tuned by controlling the charge density of the nanocellulose, as well as the pH and temperature values of the hydrogel formation conditions. Biological tests revealed that the CNF scaffolds could promote the survival and proliferation of tumor cells, and enhance the transfection of exogenous DNA into the cells, suggesting the usefulness of the CNF-based 3D matrices in supporting crucial cellular processes during cell growth and proliferation. The CNFs was applied as host materials to incorporate biomolecules for further biomedical application. For example, to investigate how the biocompatibility of a scaffold is influenced by its mechanical and structural properties, these properties of CNF-based composite matrices were controlled by incorporation of different hemicelluloses (O-acetyl galactoglucomanan (GGM), xyloglucan (XG), and xylan) into CNF hydrogel networks in different ratios and using two different approaches. The charge density of the CNFs, the incorporated hemicellulose type and amount, and the swelling time of the hydrogels were found to affect the pore structure, the mechanical strength, and thus the cells growth in the composite hydrogel scaffolds. The mechanical properties of the composite hydrogels were found to have an influence on the cell viability during the wound healing relevant 3T3 fibroblast cell culture. The thusprepared CNF composite hydrogels may work as promising scaffolds in wound healing application to provide supporting networks and to promote cells adhesion, growth, and proliferation.

Flowers of Gomphrena globosa L. as an alternatve source of betacyanins: optimization of the extraction using response surface methodology

Betacyanins are betalain pigments that display a red-violet colour which have been reported to be three times stronger than the red-violet dye produced by anthocyanins [1]. The applications of betacyanins cover a wide range of matrices, mainly as additives or ingredients in the food industry, cosmetics, pharmaceuticals and livestock feed. Although, being less commonly used than anthocyanins and carotenoids, betacyanins are stable between pH 3 to 7 and suitable for colouring in low acid matrices. In addition, betacyanins have been reported to display interesting medicinal character as powerful antioxidant and chemopreventive compounds either in vitro or in vivo models [2]. Betacyanins are obtained mainly from the red beet of Beta vulgaris plant (between I 0 to 20 mg per I 00 g pulp) but alternative primary sources are needed [3]. In addition, independently of the source used, the effect of the variables that affect the extraction of betacyanins have not been properly described and quantified. Therefore, the aim of this study was to identifY and optimize the conditions that maximize betacyanins extraction using the tepals of Gomphrena globosa L. flowers as an alternative source. Assisted by the statistical technique of response surface methodology, an experimental design was developed for testing the significant explanatory variables of the extraction (time, temperature, solid-liquid ratio and ethanolwater ratio). The identification was performed using high-performance liquid chromatography coupled with a photodiode array detector and mass spectrometry with electron spray ionization (HPLC-PDAMS/ ESI) and the response was measured by the quantification of these compounds using HPLC-PDA. Afterwards, a response surface analysis was performed to evaluate the results. The major betacyanin compounds identified were gomphrenin 11 and Ill and isogomphrenin IJ and Ill. The highest total betacyanins content was obtained by using the following conditions: 45 min of extraction. time, 35•c, 35 g/L of solid-liquid ratio and 25% of ethanol. These values would not be found without optimizing the conditions of the betacyanins extraction, which moreover showed contrary trends to what it has been described in the scientific bibliography. More specifically, concerning the time and temperature variables, an increase of both values (from the common ones used in the bibliography) showed a considerable improvement on the betacyanins extraction yield without displaying any type of degradation patterns.

An analysis of workforce efficiency using organization expenses indicators

The objective of this paper is to carry out an evaluation of employee efficiency in the United States using a professional data base, namely the ECS Survey on Workforce Efficiency (2000/2001) conducted by Watson Wyatt, which includes the responses of 453 organizations covering 1,685,336 employees. To that end, we measure workforce efficiency of US organizations, differentiated by profit status, industry sector and employee size, using expenses indicators. Our findings reveal that new employee strengths will depend upon developing and using the kinds of information and analyzes that can keep workers, educators, employers and employee program administrators abreast or ahead of changing conditions.

Optimization models and methods for real-time transportation planning in forestry

Lors du transport du bois de la forêt vers les usines, de nombreux événements imprévus peuvent se produire, événements qui perturbent les trajets prévus (par exemple, en raison des conditions météo, des feux de forêt, de la présence de nouveaux chargements, etc.). Lorsque de tels événements ne sont connus que durant un trajet, le camion qui accomplit ce trajet doit être détourné vers un chemin alternatif. En l’absence d’informations sur un tel chemin, le chauffeur du camion est susceptible de choisir un chemin alternatif inutilement long ou pire, qui est lui-même "fermé" suite à un événement imprévu. Il est donc essentiel de fournir aux chauffeurs des informations en temps réel, en particulier des suggestions de chemins alternatifs lorsqu’une route prévue s’avère impraticable. Les possibilités de recours en cas d’imprévus dépendent des caractéristiques de la chaîne logistique étudiée comme la présence de camions auto-chargeurs et la politique de gestion du transport. Nous présentons trois articles traitant de contextes d’application différents ainsi que des modèles et des méthodes de résolution adaptés à chacun des contextes. Dans le premier article, les chauffeurs de camion disposent de l’ensemble du plan hebdomadaire de la semaine en cours. Dans ce contexte, tous les efforts doivent être faits pour minimiser les changements apportés au plan initial. Bien que la flotte de camions soit homogène, il y a un ordre de priorité des chauffeurs. Les plus prioritaires obtiennent les volumes de travail les plus importants. Minimiser les changements dans leurs plans est également une priorité. Étant donné que les conséquences des événements imprévus sur le plan de transport sont essentiellement des annulations et/ou des retards de certains voyages, l’approche proposée traite d’abord l’annulation et le retard d’un seul voyage, puis elle est généralisée pour traiter des événements plus complexes. Dans cette ap- proche, nous essayons de re-planifier les voyages impactés durant la même semaine de telle sorte qu’une chargeuse soit libre au moment de l’arrivée du camion à la fois au site forestier et à l’usine. De cette façon, les voyages des autres camions ne seront pas mo- difiés. Cette approche fournit aux répartiteurs des plans alternatifs en quelques secondes. De meilleures solutions pourraient être obtenues si le répartiteur était autorisé à apporter plus de modifications au plan initial. Dans le second article, nous considérons un contexte où un seul voyage à la fois est communiqué aux chauffeurs. Le répartiteur attend jusqu’à ce que le chauffeur termine son voyage avant de lui révéler le prochain voyage. Ce contexte est plus souple et offre plus de possibilités de recours en cas d’imprévus. En plus, le problème hebdomadaire peut être divisé en des problèmes quotidiens, puisque la demande est quotidienne et les usines sont ouvertes pendant des périodes limitées durant la journée. Nous utilisons un modèle de programmation mathématique basé sur un réseau espace-temps pour réagir aux perturbations. Bien que ces dernières puissent avoir des effets différents sur le plan de transport initial, une caractéristique clé du modèle proposé est qu’il reste valable pour traiter tous les imprévus, quelle que soit leur nature. En effet, l’impact de ces événements est capturé dans le réseau espace-temps et dans les paramètres d’entrée plutôt que dans le modèle lui-même. Le modèle est résolu pour la journée en cours chaque fois qu’un événement imprévu est révélé. Dans le dernier article, la flotte de camions est hétérogène, comprenant des camions avec des chargeuses à bord. La configuration des routes de ces camions est différente de celle des camions réguliers, car ils ne doivent pas être synchronisés avec les chargeuses. Nous utilisons un modèle mathématique où les colonnes peuvent être facilement et naturellement interprétées comme des itinéraires de camions. Nous résolvons ce modèle en utilisant la génération de colonnes. Dans un premier temps, nous relaxons l’intégralité des variables de décision et nous considérons seulement un sous-ensemble des itinéraires réalisables. Les itinéraires avec un potentiel d’amélioration de la solution courante sont ajoutés au modèle de manière itérative. Un réseau espace-temps est utilisé à la fois pour représenter les impacts des événements imprévus et pour générer ces itinéraires. La solution obtenue est généralement fractionnaire et un algorithme de branch-and-price est utilisé pour trouver des solutions entières. Plusieurs scénarios de perturbation ont été développés pour tester l’approche proposée sur des études de cas provenant de l’industrie forestière canadienne et les résultats numériques sont présentés pour les trois contextes.

Levels of some heavy Metals in Cocoyam ( Colocasia esculentum ) grown on Soil receiving Effluent from a Paint Industry

The levels of some heavy metals in soil samples and tubers of cocoyam ( Colocasia esculentum ) grown on soil receiving paint wastes (PWS) has been investigated using Atomic Absorption spectrophotometer (Unicam 939/959 model). Similar analyses were carried out for the same plant from a control area. The studies revealed that although the P.W.S contained abnormally high levels of Pb (474.14mgkg-1) and Cu (137.85mgkg-1). The paint waste tuber (PWT) recorded low levels of these metals: Pb (2.13mgkg-1) and Cu (13.85mgkg-1) respectively. Correlation analysis tested at 0.05 level of significance show that no significant correlation existed between the metals levels in the soil and the level in the tuber. In all cases the levels of the metals in the tubers were well below the upper limit documented for unpolluted plant. The results however suggest the ineffectiveness of the use of Colocasia esculentum as a bioindicator for heavy metal pollution in soil.

Industry Linkages and Audit Firms' Industry Portfolio Choice: Evidence from Product Language

Audit firms are organized along industry lines and industry specialization is a prominent feature of the audit market. Yet, we know little about how audit firms make their industry portfolio decisions, i.e., how audit firms decide which set of industries to specialize in. In this study, I examine how the linkages between industries in the product space affect audit firms’ industry portfolio choice. Using text-based product space measures to capture these industry linkages, I find that both Big 4 and small audit firms tend to specialize in industry-pairs that 1) are close to each other in the product space (i.e., have more similar product language) and 2) have a greater number of “between-industries” in the product space (i.e., have a greater number of industries with product language that is similar to both industries in the pair). Consistent with the basic tradeoff between specialization and coordination, these results suggest that specializing in industries that have more similar product language and more linkages to other industries in the product space allow audit firms greater flexibility to transfer industry-specific expertise across industries as well as greater mobility in the product space, hence enhancing its competitive advantage. Additional analysis using the collapse of Arthur Andersen as an exogenous supply shock in the audit market finds consistent results. Taken together, the findings suggest that industry linkages in the product space play an important role in shaping the audit market structure.

Building an Ontology of Product/Service-Systems: Using a Maritime Case Study to Elicit Classifications and Characteristics

Part 4: Transition Towards Product-Service Systems