Compósitos Portland-biopolímeros para cimentação de poços de petróleo

The oil production in mature areas can be improved by advanced recovery techniques. In special, steam injection reduces the viscosity of heavy oils, thus improving its flow to surrounding wells. On the other hand, the usually high temperatures and pressures involved in the process may lead to cement cracking, negatively affecting both the mechanical stability and zonal isolation provided by the cement sheath of the well. The addition of plastic materials to the cement is an alternative to prevent this scenario. Composite slurries consisting of Portland cement and a natural biopolymer were studied. Samples containing different contents of biopolymer dispersed in a Portland cement matrix were prepared and evaluated by mechanical and rheological tests in order to assess their behavior according to API (American Petroleum Institute) guidelines. FEM was also applied to map the stress distribution encountered by the cement at bottom bole. The slurries were prepared according to a factorial experiment plan by varying three parameters, i.e., cement age, contents of biopolymer and water-to-cement ratio. The results revealed that the addition of the biopolymer reduced the volume of free water and the setting time of the slurry. In addition, tensile strength, compressive strength and toughness improved by 30% comparing hardened composites to plain Portland slurries. FEM results suggested that the stresses developed at bottomhole may be 10 to 100 times higher than the strength of the cement as evaluated in the lab by unconfined mechanical testing. An alternative approach is proposed to adapt the testing methodology used to evaluate the mechanical behavior of oilwell cement slurries by simulating the confined conditions encountered at bottornhole

Desenvolvimento de argamassa para restauração utilizando resíduo do polimento do porcelanato

The coatings mortars are essential elements of building structures because they execute an important role in protecting walls and are particularly exposed to aggressive action responsible for its degradation over time. The importance of wall coverings has been the subject of discussion and analysis in the conservation and rehabilitation of old buildings. Are sometimes removed and replaced with inappropriate solutions of constructive point of view or architecture. The most commonly used coatings on walls of old buildings is based on traditional hydraulic lime mortars. The present study aims at the formulation of new lime- based mortars and aerial fine aggregate, in order to contribute to a better field of conservation and restoration mortar coating of old buildings. Residue was used for polishing porcelain as fine aggregate, replacing the aggregate (sand), in percentages 05-30% by mass. We conducted a thorough evaluation of the mortar properties in fresh and hardened state by comparing the performance of the same with a reference mortar. The residue used was characterized as the density, bulk density, and particle size laser, scanning electron microscopy, X-ray diffraction and X-ray fluorescence. Formulations were produced 7, 6 with residue and one commonly used formulation, which served as a reference. In the formulations of lime mortars air (hydrated lime powder CH-I) has been adopted a stroke volume (1:3) with constant binder, was varied and the water / binder and aggregate and waste. For evaluation of mortars fresh, proceeded to consistency analysis, specific gravity, water retention and air content embedded. In the hardened state assays were performed in specific gravity, water retention, modulus of elasticity, tensile strength in bending, compressive strength, water absorption by capillary action, adhesion, tensile strength, resistance to shrinkage and salts by of crystallization trials with resources chloride solution, nitrate and sulfate all sodium in prismatic at 90 days of age, in addition to the micro structural analysis of mortars. Based on the results we can see that the mortar formulated with 10% content of waste and the reference free retraction feature more stable closer to neutrality. The composition of 10% was obtained better performance against the action of the salt crystallization. The mortar with 15% residue obtained better density, lower air content embedded and high capacity for water retention developing good workability. The replacement of 20% of waste generates a satisfactory utilization of resistance to compression, flexion and traction grip the base. And, finally, it can be seen that the mortar with 10, 15 and 20% residual show, in principle, good suitability as coatings, thus enabling a final result consistent with durability, workability and aesthetics developing therefore a material with better performance to repair or replace existing mortars in old buildings

Influência da vermiculita expandida na formulação de pastas leves para evitar a migração de gás em cimentação de poços petrolíferos

The gas migration during the cementing of wells is one of the main problems of oil wells engineering. Its occurrence can cause severe problems since shortly to loss of control of the well after cementation. Recently, 20/04/2010 In an accident of major proportions in the Gulf of Mexico, among other factors, faulty cementing operation provided the gas migration, causing the accident, in which 11 people died and 17 were injured occurred. Besides the serious consequences that can be caused by gas migration, remediation of the problem, which is made by injecting cement in damaged areas, usually involves additional costs and is not always effective. Therefore, preventing gas migration to be preferred. Some methods are used to prevent the migration of the pressurized gas as the annular space, application of pressure pulses, reducing the height of the cement column compressible cement pastes of low permeability, pastes and to control free filtered water, and binders of thixotropic cement expandable and flexible. Thus, the cement pastes used to prevent gas migration must meet the maximum these methods. Thus, this study aimed to formulate a cement paste to prevent gas migration, using the expanded vermiculite, and evaluate the behavior of the folder trials necessary for use in oil wells. Free water content, rheological properties, compressive strength, loss of liquid phase sedimentation of solids, specific weight, thickening time and gas migration: The following tests were performed. The results show that meets the specifications paste formulated for use in oil wells and the use of expanded vermiculite contribute to the absorption of free water, thixotropy and low density. The absorption of free water is proven to result in zero percentage test free water content, thixotropy is observed with the high value of the initial gel strength (Gi) in testing rheological properties and low density is proven in test weight specific

Efeito da adição de fibras da palma do licuri (syagrus coronata) no comportamento físico e mecânico de compósitos de matriz cimentícia

This research was motivated by the requirement of asbestos s replacement in building systems and the need to generate jobs and income in the country side of the state of Bahia, Brazil. The project aimed at using fibers from licuri leaves (syagrus coronata), an abundant palm in the region, to produce composites appropriate for the sustainable production of cement fibre reinforced products in small plants. The composites were produced in laboratory using Portland cement CP-II-F32, sand, water, licuri palm fiber contents of 1.0, 1.5 and 2.0% by weight of binder (two different fiber length) and metakaolin. The latter was chosen as an additional binder for its efficiency to reduce the alkalinity of cementitious matrixes therefore preventing the degradation of vegetable fibers. The characterization of the composite components was carried out by sieving and laser particle size analyses, thermal analysis, fluorescence and X-ray diffraction. The composites performance was evaluated by 3- point-bending tests, compressive strength, ultrasound module of elasticity, free and restrained shrinkage, water capillarity absorption and apparent specific gravity. It has been found that the addition of fibers increased the time to onset of cracking over 200.00% and a 25% reduction in cracks opening in the restrained shrinkage test. The capillary absorption reduced about 25% when compared to fiber-free composites. It was also observed with regard to flexural strength, compressive strength and specific gravity, that the addiction of fibers did not affect the composite performance presenting similar results for compounds with and without fibers. In general it can be stated that the reinforced composite fibers of palm licuri presents physical and mechanical characteristics which enable them to be used in the intended proposals of this research

Cinemática de partículas em fluidos de viscosidade variável com o tempo e sua aplicação na construção de poços de petróleo: avaliação durante paradas operacionais

The new oil reservoirs discoveries in onshore and ultra deep water offshore fields and complex trajectories require the optimization of procedures to reduce the stops operation during the well drilling, especially because the platforms and equipment high cost, and risks which are inherent to the operation. Among the most important aspects stands out the drilling fluids project and their behavior against different situations that may occur during the process. By means of sedimentation experiments, a correlation has been validated to determe the sedimentation particles velocity in variable viscosity fluids over time, applying the correction due to effective viscosity that is a shear rate and time function. The viscosity evolution over time was obtained by carrying out rheologic tests using a fixed shear rate, small enough to not interfere in the fluid gelling process. With the sedimentation particles velocity and the fluid viscosity over time equations an iterative procedure was proposed to determine the particles displacement over time. These equations were implemented in a case study to simulate the cuttings sedimentation generated in the oil well drilling during stops operation, especially in the connections and tripping, allowing the drilling fluid project in order to maintain the cuttings in suspension, avoiding risks, such as stuck pipe and in more drastic conditions, the loss of the well

Estudo da formulação de pré-misturas secas para a cimentação de poços em terra

An economical solution for cementing oil wells is the use of pre-prepared dry mixtures containing cement and additives. The mixtures may be formulated, prepared and transported to the well where is added water to be pumped.Using this method, becomes dispensable to prepare the cement mixes containing additives in the cementing operation, reducing the possibility of error. In this way, the aim of this work is to study formulations of cement slurries containing solid additives for primary cementing of oil wells onshore for typical depths of 400, 800 and 1,200 meters. The formulations are comprised of Special Class Portland cement, mineral additions and solids chemical additives.The formulated mixtures have density of 1.67 g / cm ³ (14.0 lb / gal). Their optimization were made through the analysis of the rheological parameters, fluid loss results, free water, thickening time, stability test and mechanical properties.The results showed that mixtures are in conformity the specifications for cementing oil wells onshore studied depths

Efeito da adição de microfibras de lã de vidro na tenacidade à ruptura de pastas de cimento para poços de petróleo

Although there are a wide variety of additives that act in fresh state, to adjust the properties of cement, there is also a search by additions that improve the tenacity of the cement in the hardened state. This, in turn, can often be increased by inserting fibers, which act on the deflection of microcracks. This study aimed to use a microfiber glass wool (silica-based) as an additive reinforcing the cement matrix, improving the rupture tenacity, in order to prevent the propagation of microcracks in the cement sheath commonly found in oil wells submitted to high temperatures. The fibers were added at different concentrations, 2 to 5% (BWOC) and varied average sizes, grinding for 90 s, 180 s, 300 s, 600 s. The cement slurries were made with a density of 1,90 g/ cm3 (15,6 lb/gal), using Portland cement CPP- Special Class as the hydraulic binder and 40% silica flour. The characterization of the fiber was made by scanning electron microscopy (SEM), particle size by sieving, X-ray fluorescence (XRF), X-ray diffraction (XRD) and thermogravimetry (TG / DTG). Were performed technological tests set by the API (American Petroleum Institute) by rheology, stability, free water, compressive strength, as well as testing rupture energy, elastic modulus and permeability. The characterization results showed good thermal stability of the microfiber glass wool for application in oil wells submitted to steam injection and, also, that from the particle size data, it was possible to suggest that microfibers milled up to 300 s, are ideal to act as reinforcement to the cement slurries. The rheological parameters, there was committal of plastic viscosity when larger lengths were inserted of microfiber (F90). The values obtained by free water and stability were presented according to API. The mechanical properties, the incorporation of microfiber to the cement slurries gave better rupture tenacity, as compared to reference cement slurries. The values of compressive strength, elastic modulus and permeability have been maintained with respect to the reference cement slurries. Thus, cement slurries reinforced with microfiber glass wool can ensure good application for cementing oil wells submitted to steam injection, which requires control of microcracks, due to the thermal gradients

Influência da adição de cinza do bagaço de cana calcinada em sistemas de pastas para cimentação de poços petrolíferos

Cementing operation is one of the most important stages in the oil well drilling processes and has main function to form hydraulic seal between the various permeable zones traversed by the well. However, several problems may occur with the cement sheath, either during primary cementing or during the well production period. Cements low resistance can cause fissures in the cement sheath and compromise the mechanical integrity of the annular, resulting in contamination of groundwater and producing zones. Several researches show that biomass ash, in particular, those generated by the sugarcane industry have pozzolanic activity and can be added in the composition of the cementing slurries in diverse applications, providing improvements in mechanical properties, revenue and cement durability. Due to the importance of a low cost additive that increases the mechanical properties in a well cementing operations, this study aimed to potentiate the use of sugarcane bagasse ash as pozzolanic material, evaluate the mechanisms of action of this one on cement pastes properties and apply this material in systems slurries aimed to cementing a well with 800 m depth and geothermal gradient of 1.7 °F/100 ft, as much primary cementing operations as squeeze. To do this, the ash beneficiation methods were realized through the processes of grinding, sifting and reburning (calcination) and then characterization by X-ray fluorescence, XRD, TG / DTG, specific surface area, particle size distribution by laser diffraction and mass specific. Moreover, the ash pozzolanic activity added to the cement at concentrations of 0%, 20% and 40% BWOC was evaluated by pozzolanic activity index with lime and with Portland cement. The evaluation of the pozzolanic activity by XRD, TG / DTG and compressive strength confirmed the ash reactivity and indicated that the addition of 20% in the composition of cement slurries produces improvement 34% in the mechanical properties of the slurry cured. Cement slurries properties evaluated by rheological measurements, fluid loss, free fluid, slurry sedimentation, thickening time and sonic strength (UCA) were satisfactory and showed the viability of using the sugarcane ash in cement slurries composition for well cementing

Efeito da adição de cargas minerais leves na resistência mecânica de grautes para cimentação de poços offshore

The preparation of cement slurries for offshore well cementing involves mixing all solid components to be added to the mixing water on the platform. The aim of this work was to study the formulation of pre-prepared dry mixtures, or grouts, for offshore oilwell cementing. The addition of mineral fillers in the strength of lightweight grouts applied for depths down to 400 m under water depths of 500 m was investigated. Lightweight materials and fine aggregates were selected. For the choice of starting materials, a study of the pozzolanic activity of low-cost fillers such as porcelain tile residue, microsilica and diatomaceous earth was carried out by X-ray diffraction and mechanical strength tests. Hardened grouts containing porcelain tile residue and microsilica depicted high strength at early ages. Based on such preliminary investigation, a study of the mechanical strength of grouts with density 1.74 g/cm3 (14.5 lb/gal) cured initially at 27 °C was performed using cement, microsilica, porcelain tile residue and an anti-foaming agent. The results showed that the mixture containing 7% of porcelain tile residue and 7% of microsilica was the one with the highest compressive strength after curing for 24 hours. This composition was chosen to be studied and adapted for offshore conditions based on testes performed at 4 °C. The grout containing cement, 7% of porcelain tile residue, 7% of active silica and admixtures (CaCl2), anti-foaming and dispersant resulted satisfactory rheology and mechanical strength after curing for 24 hours of curing

Metodologia para avaliação de cinemática de partículas gasosas em fluidos de viscosidade variável com o tempo e sua aplicação na construção de poços de petróleo

Many challenges have been presented in petroleum industry. One of them is the preventing of fluids influx during drilling and cementing. Gas migration can occur as result of pressure imbalance inside the well when well pressure becomes lower than gas zone pressure and in cementing operation this occurs during cement slurry transition period (solid to fluid). In this work it was developed a methodology to evaluate gas migration during drilling and cementing operations. It was considered gel strength concept and through experimental tests determined gas migration initial time. A mechanistic model was developed to obtain equation that evaluates bubble displacement through the fluid while it gels. Being a time-dependant behavior, dynamic rheological measurements were made to evaluate viscosity along the time. For drilling fluids analyzed it was verified that it is desirable fast and non-progressive gelation in order to reduce gas migration without affect operational window (difference between pore and fracture pressure). For cement slurries analyzed, the most appropriate is that remains fluid for more time below critical gel strength, maintaining hydrostatic pressure above gas zone pressure, and after that gels quickly, reducing gas migration. The model developed simulates previously operational conditions and allow changes in operational and fluids design to obtain a safer condition for well construction

A representação social do cuidado no Programa Saúde da Família na cidade do Natal

The aim of this study was to learn about the social representations of the care provided by the Family Health Program (FHP) in the city of Natal, Brazil and determine how these representations guide the daily actions of doctors, dentists, nurses, nurse s assistants and oral health assistants during the work process. In this sense, we used the theoreticalmethodological approach to the Theory of Social Representations. For data collection, we used the following instruments: a two-part questionnaire, where the first part recorded sociodemographic data and the second part was adapted to the free word association technique (FWAT), which was applied to 90 professionals belonging to 18 FHP units. Interviews were also used as collection instruments. These were based on inductive stimuli and on direct observations of 30 of these professionals. After a superficial reading of the material, we constructed a corpus from which ten categories emerged. To analyze FWAT we used lexicographic analysis, combining frequency and the mean order of responses. The interviews and sociodemographic variables were analyzed using content analysis and descriptive statistical analysis, respectively. The study showed that the central nucleus of the social representation in question is composed of the elements attention, receptivity and love, revealing that the subjects have different understandings of the FHP care process and that the knowledge accumulated in this respect is supported by an approximate vision of the meaning of care. However, traditional elements with trivializing connotations about care predominate, which compromises the development of strategies to overcome traditional practices. In the set of analyses, we were able to capture the invariance of a contradiction: on one hand, professionals know and affirm the importance of providing care for FHP patients; on the other, the experience of daily practice translates into the negation of this concept. In this contradictory context, professionals build gradual and successive syntheses that allow them to act and affirm themselves by associating information from their academic formation, structured knowledge acquired in other experiences, values and symbols of their daily routine. Thus, they shape and reshape themselves, according to what is concretely and specifically required, at the same time both plural and multiple. The composition of the central nucleus indicates that any measure that intends to modify attitudes that is, the daily actions of FHP professionals with respect to care must take into account and give priority to the debate about the redefining of the semantic fields of the central nucleus (love/attention/receptivity and humanization), especially those of love and attention

Fatores preditivos da dor em pacientes submetidos à cirurgia cardíaca

A identificação de fatores que interferem na dor pós-operatória é útil para minimizar o sofrimento desnecessário e favorecer a uma intervenção analgésica adequada, evitando generalizações nas condutas terapêuticas. O propósito dessa investigação foi identificar os fatores preditivos da dor em pacientes submetidos à cirurgia cardíaca e a relação existente entre dor, analgesia e personalidade. Trata-se de um estudo prospectivo e analítico, aprovado pelo comitê de ética da UFRN (175/06), o qual proporcionou uma abordagem multidisciplinar ao envolver áreas distintas como: fisioterapia, psicologia, médica e enfermagem (interdisciplinaridade) na elucidação do objeto de estudo relacionado a fatores preditivos da dor. Para caracterização geral dos pacientes foi utilizada uma ficha de avaliação fisioterapêutica; a dor pós-operatória foi avaliada pela escala numérica de dor e questionário para dor McGill e o Inventário Millon de Estilos de Personalidade (MIPS) foi utilizado para identificar e avaliar as manifestações das características comportamentais e de personalidade. Foram acompanhados, do 1º ao 5º dia de pós-operatório (DPO), 160 pacientes submetidos à cirurgia cardíaca, 57,5% do sexo masculino, com idade média de 56,8±14,4 anos, sendo incluídos no estudo aqueles que se queixaram de dor no pós-operatório em pelo menos um dos dias de avaliação e assinaram termo de concentimento livre e esclarecido (TCLE). Os dados foram submetidos ao teste Qui-quadrado, regressão logística multivariada, teste de correlação de Spearman, teste t e ANOVA. Ao serem submetidos à análise de regressão foram encontrados seis fatores preditivos da dor: tempo cirúrgico > 3 horas, dreno mediastinal e lateral, tosse, vômitos, tempo de dreno > 24 horas e sexo feminino. Estes fatores apresentaram uma correlação positiva e significava com a intensidade dolorosa referida pelos pacientes na escala numérica de dor e os pacientes que apresentaram mais fatores preditivos da dor referiram mais dor. 23 Já em relação ao McGill não se obteve diferença significativa entre os pacientes com mais e menos fatores preditivos. Observou-se que foram administrados diferentes tipos de analgésicos, isolados ou associados, sendo estes: paracetamol, paracetamol associado à codeína, dipirona, tramadol, toradol e tilatil. A percepção dolorosa apresentou magnitudes variando de leve a moderada do 1º ao 5º DPO e ao ser relacionada com as características de personalidade, nos pacientes com menos dor, observou-se os fatores: preservação, individualismo, introversão e os com mais dor foram: proteção, extroversão, retraimento, discrepância, afetividade, acomodação, comunicabilidade e firmeza. Evidenciou-se que o comportamento doloroso pós-cirurgia cardíaca é multifatorial e que a determinação da existência de fatores preditivos da dor permite ao profissional da área de saúde fazer o uso adequado dos analgésicos, haja vista que o alívio da dor é responsabilidade de todos os profissionais da saúde. Os aspectos psicológicos enquanto características de personalidade podem influenciar padrões de comportamento como os observados.

Dynamics of some limnological characteristics in pacu (Piaractus mesopotamicus) culture tanks as function of handling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Benzocaine and eugenol as anesthetics for Brycon hilarii

A utilização de produtos anestésicos durante práticas de manejo é frequentemente empregada, porém doses corretas de diferentes fármacos e para espécies distintas ainda estão em fases de pesquisa. O objetivo do estudo foi determinar a melhor concentração de benzocaína e eugenol para juvenis de piraputanga (B. hilarii). Foram utilizados 104 juvenis de piraputanga com peso médio de 50,04 ± 20,80 g e comprimento total médio de 16,30 ± 12,32 cm adquiridos em uma piscicultura comercial localizada na região Oeste do Estado do Paraná. O trabalho foi conduzido no Laboratório de Aquicultura do Grupo de Estudos de Manejo na Aquicultura - GEMAq da Universidade Estadual do Oeste do Paraná (UNIOESTE). Os animais foram submetidos a cinco concentrações de benzocaína (50,0; 100,0; 150,0; 200,0 e 250,0 mg L-1) e sete concentrações de eugenol (50,0; 100,0; 150,0; 200,0; 250,0; 300,0 e 350 mg L-1), para a aferição dos tempos referentes à letargia. Para a recuperação, os animais foram mantidos em aquários livre do anestésico e observado o tempo em que retornaram às atividades normais. A melhor dose de benzocaína verificada foi de 100 mg L-1, enquanto a melhor dose de eugenol foi entre 100 e 150 mg L-1.

A influência do tempo de diálise e do paratormônio sobre as condições clínico-radiográficas bucais de indivíduos com insuficiência renal crônica em diálise

Universidade Estadual do Rio Grande do Norte