Precision agriculture in Australia: present status and recent developments

A brief account of the present status of Precision Agriculture (PA) in Australia is presented, and areas of opportunity in the grains, sugar and wine industries are identified. In particular, these relate to the use of spatially-distributed experimentation to fine-tune management so as to achieve production efficiencies, reduced risk of environmental impact and enhanced food security, and the management of crop quality through selective harvesting and product streaming. The latter may be an important avenue by which farmers can take a more active role in the off-farm part of agricultural value chains. The important role of grower groups in facilitating PA adoption is also discussed.

Promoting Customer Loyalty Through a Telecommunication Specific CRM Framework

The objective of this thesis is to find new methods to promote customer loyalty in the telecommunication industry. The study was made on the appointment of Tecnotree Corporation, which operates in a telecommunication software business. This thesis comprises of a theoretical section, which includes the presentation of relevant theoretical background and of an empirical section, which is mostly based on interviews and professional opinions. One of the most important aspects of customer relationship management (CRM) is building customer loyalty. Telecommunication markets are becoming saturated in an increasing number of markets. Customer acquisition is no longer a way to grow; companies need to hold on to their existing customers. Companies are always looking for new ways to avoid churning customers. These new methods are searched from recent studies and they are discussed with marketing professionals from operators. Current CRM lacks the ability to extract data efficiently from databases. Social media’s utilization is also in its early stages. It contains a lot of possibilities, but also things that can be risky for companies. In order to obtain full advantage of the new methods companies are required to invest considerable amounts of time and money to develop new systems, but not all companies are ready for the change.

Crecimiento de plántulas en relación al tamaño de las semillas en la parte árida de Australia

UANL

Factors influencing health care utilization following a cardiovascular event among aboriginal people in Central Australia

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal.

A comparative study of the resilience of coal logistics chains in Australia, South Africa and Canada

Au cours des dernières années l'industrie du charbon a connu un essor important. L'importance du charbon dans l'économie mondiale provient d'une demande mondiale soutenue et de niveaux de production en hausse constante. De ce fait, le nombre élevé d'importateurs et d'exportateurs est à l'origine d'un système d'échange complexe où la compétition est féroce. En effet, un nombre grandissant de pays importateurs se partagent les sources d'approvisionnement tandis qu'un nombre limité de pays exportateurs s'efforcent de répondre à la demande tout en essayant de s'accaparer le plus de parts du marché mondial. L'objectif de cette recherche s'inscrit dans ce contexte en démontrant les bénéfices associés aux chaînes logistiques résilientes pour tout acteur de l'industrie soucieux de devancer la compétition. Une analyse de la logistique de l'industrie du charbon permet entre autres de se pencher sur les questions suivantes: Comment les infrastructures influencent-elles la résilience d'une chaîne logistique? Quels risques est-ce que les catastrophes naturelles présentent pour une chaîne logistique? Comment la gouvernance influence-t-elle la résilience d'une chaîne logistique? Une chaîne logistique représente le trajet effectué par un bien ou produit au cours de son cycle de vie, du point d'origine au point de consommation. Ceci étant dit, le meilleur moyen de régler les problèmes inhérents aux chaînes logistiques est de maintenir de hauts niveaux de résilience. Cette recherche évaluera donc la résilience de chaînes logistiques du charbon des industries australienne, sud-africaine et canadienne. Pour ce faire, trois variables seront étudiées: les infrastructures, les catastrophes naturelles et la gouvernance. La comparaison des trois cas à l'étude se fera par un nombre défini d'indicateurs (12 au total) pour chacune des variables étudiées. Les résultats de cette recherche démontrent que la résilience des trois cas à l'étude se ressemble. Cependant, certaines chaînes logistiques détiennent des avantages comparatifs qui améliorent grandement leur résilience et leur compétitivité. Plusieurs sujets de recherche pourraient être utilisés pour compléter cette recherche. L'analyse comparative pourrait être appliquée à d'autres chaînes logistiques pour vérifier la viabilité des résultats. Une analyse semblable pourrait également être entreprise pour le secteur en aval de la chaîne logistique. Finalement, une méthodologie basée sur des interviews pourrait ajouter un regard différent sur les questions abordées.

Reforming Federal Systems: Insights from Australia, Canada, Germany and Switzerland

Série de l'Observatoire des fédérations

Synthesis, Characterization and Properties of Ca5A2TiO12 (A=Nb, Ta) Ceramic Dielectric Materials for Applications in Microwave Telecommunication Systems

Microwave ceramic dielectric materials Ca5Nb2TiO12 and Ca5Ta2TiO12 have been prepared by a conventional solid-state ceramic process. The structure was studied by X-ray diffraction and the dielectric properties were characterized at microwave frequencies. The ceramics posses a relatively high dielectric constant, very low dielectric loss (Q5 x f > 30000GHz) and small temperature variation of resonant frequency. These materials are potential candidates for dielectric resonator applications in microwave integrated circuits. [DOI: 10. 1 143/JJAP.41.3834]

High-Speed Semiconductor Lasers based on Low-Dimensional Active Materials for Optical Telecommunication

The scope of this work is the fundamental growth, tailoring and characterization of self-organized indium arsenide quantum dots (QDs) and their exploitation as active region for diode lasers emitting in the 1.55 µm range. This wavelength regime is especially interesting for long-haul telecommunications as optical fibers made from silica glass have the lowest optical absorption. Molecular Beam Epitaxy is utilized as fabrication technique for the quantum dots and laser structures. The results presented in this thesis depict the first experimental work for which this reactor was used at the University of Kassel. Most research in the field of self-organized quantum dots has been conducted in the InAs/GaAs material system. It can be seen as the model system of self-organized quantum dots, but is not suitable for the targeted emission wavelength. Light emission from this system at 1.55 µm is hard to accomplish. To stay as close as possible to existing processing technology, the In(AlGa)As/InP (100) material system is deployed. Depending on the epitaxial growth technique and growth parameters this system has the drawback of producing a wide range of nano species besides quantum dots. Best known are the elongated quantum dashes (QDash). Such structures are preferentially formed, if InAs is deposited on InP. This is related to the low lattice-mismatch of 3.2 %, which is less than half of the value in the InAs/GaAs system. The task of creating round-shaped and uniform QDs is rendered more complex considering exchange effects of arsenic and phosphorus as well as anisotropic effects on the surface that do not need to be dealt with in the InAs/GaAs case. While QDash structures haven been studied fundamentally as well as in laser structures, they do not represent the theoretical ideal case of a zero-dimensional material. Creating round-shaped quantum dots on the InP(100) substrate remains a challenging task. Details of the self-organization process are still unknown and the formation of the QDs is not fully understood yet. In the course of the experimental work a novel growth concept was discovered and analyzed that eases the fabrication of QDs. It is based on different crystal growth and ad-atom diffusion processes under supply of different modifications of the arsenic atmosphere in the MBE reactor. The reactor is equipped with special valved cracking effusion cells for arsenic and phosphorus. It represents an all-solid source configuration that does not rely on toxic gas supply. The cracking effusion cell are able to create different species of arsenic and phosphorus. This constitutes the basis of the growth concept. With this method round-shaped QD ensembles with superior optical properties and record-low photoluminescence linewidth were achieved. By systematically varying the growth parameters and working out a detailed analysis of the experimental data a range of parameter values, for which the formation of QDs is favored, was found. A qualitative explanation of the formation characteristics based on the surface migration of In ad-atoms is developed. Such tailored QDs are finally implemented as active region in a self-designed diode laser structure. A basic characterization of the static and temperature-dependent properties was carried out. The QD lasers exceed a reference quantum well laser in terms of inversion conditions and temperature-dependent characteristics. Pulsed output powers of several hundred milli watt were measured at room temperature. In particular, the lasers feature a high modal gain that even allowed cw-emission at room temperature of a processed ridge wave guide device as short as 340 µm with output powers of 17 mW. Modulation experiments performed at the Israel Institute of Technology (Technion) showed a complex behavior of the QDs in the laser cavity. Despite the fact that the laser structure is not fully optimized for a high-speed device, data transmission capabilities of 15 Gb/s combined with low noise were achieved. To the best of the author`s knowledge, this renders the lasers the fastest QD devices operating at 1.55 µm. The thesis starts with an introductory chapter that pronounces the advantages of optical fiber communication in general. Chapter 2 will introduce the fundamental knowledge that is necessary to understand the importance of the active region`s dimensions for the performance of a diode laser. The novel growth concept and its experimental analysis are presented in chapter 3. Chapter 4 finally contains the work on diode lasers.

Development of directly modulated high speed telecommunication lasers based on surface defined feedback gratings

High-speed semiconductor lasers are an integral part in the implemen- tation of high-bit-rate optical communications systems. They are com- pact, rugged, reliable, long-lived, and relatively inexpensive sources of coherent light. Due to the very low attenuation window that exists in the silica based optical fiber at 1.55 μm and the zero dispersion point at 1.3 μm, they have become the mainstay of optical fiber com- munication systems. For the fabrication of lasers with gratings such as, distributed bragg reflector or distributed feedback lasers, etching is the most critical step. Etching defines the lateral dimmensions of the structure which determines the performance of optoelectronic devices. In this thesis studies and experiments were carried out about the exist- ing etching processes for InP and a novel dry etching process was de- veloped. The newly developed process was based on Cl2/CH4/H2/Ar chemistry and resulted in very smooth surfaces and vertical side walls. With this process the grating definition was significantly improved as compared to other technological developments in the respective field. A surface defined grating definition approach is used in this thesis work which does not require any re-growth steps and makes the whole fabrication process simpler and cost effective. Moreover, this grating fabrication process is fully compatible with nano-imprint lithography and can be used for high throughput low-cost manufacturing. With usual etching techniques reported before it is not possible to etch very deep because of aspect ratio dependent etching phenomenon where with increasing etch depth the etch rate slows down resulting in non-vertical side walls and footing effects. Although with our de- veloped process quite vertical side walls were achieved but footing was still a problem. To overcome the challenges related to grating defini- tion and deep etching, a completely new three step gas chopping dry etching process was developed. This was the very first time that a time multiplexed etching process for an InP based material system was demonstrated. The developed gas chopping process showed extra ordinary results including high mask selectivity of 15, moderate etch- ing rate, very vertical side walls and a record high aspect ratio of 41. Both the developed etching processes are completely compatible with nano imprint lithography and can be used for low-cost high-throughput fabrication. A large number of broad area laser, ridge waveguide laser, distributed feedback laser, distributed bragg reflector laser and coupled cavity in- jection grating lasers were fabricated using the developed one step etch- ing process. Very extensive characterization was done to optimize all the important design and fabrication parameters. The devices devel- oped have shown excellent performance with a very high side mode suppression ratio of more than 52 dB, an output power of 17 mW per facet, high efficiency of 0.15 W/A, stable operation over temperature and injected currents and a threshold current as low as 30 mA for almost 1 mm long device. A record high modulation bandwidth of 15 GHz with electron-photon resonance and open eye diagrams for 10 Gbps data transmission were also shown.

1.55 µm High-Speed QDs Lasers for Optical Telecommunication Applications

In this work investigation of the QDs formation and the fabrication of QD based semiconductor lasers for telecom applications are presented. InAs QDs grown on AlGaInAs lattice matched to InP substrates are used to fabricate lasers operating at 1.55 µm, which is the central wavelength for far distance data transmission. This wavelength is used due to its minimum attenuation in standard glass fibers. The incorporation of QDs in this material system is more complicated in comparison to InAs QDs in the GaAs system. Due to smaller lattice mismatch the formation of circular QDs, elongated QDs and quantum wires is possible. The influence of the different growth conditions, such as the growth temperature, beam equivalent pressure, amount of deposited material on the formation of the QDs is investigated. It was already demonstrated that the formation process of QDs can be changed by the arsenic species. The formation of more round shaped QDs was observed during the growth of QDs with As2, while for As4 dash-like QDs. In this work only As2 was used for the QD growth. Different growth parameters were investigated to optimize the optical properties, like photoluminescence linewidth, and to implement those QD ensembles into laser structures as active medium. By the implementation of those QDs into laser structures a full width at half maximum (FWHM) of 30 meV was achieved. Another part of the research includes the investigation of the influence of the layer design of lasers on its lasing properties. QD lasers were demonstrated with a modal gain of more than 10 cm-1 per QD layer. Another achievement is the large signal modulation with a maximum data rate of 15 Gbit/s. The implementation of optimized QDs in the laser structure allows to increase the modal gain up to 12 cm-1 per QD layer. A reduction of the waveguide layer thickness leads to a shorter transport time of the carriers into the active region and as a result a data rate up to 22 Gbit/s was achieved, which is so far the highest digital modulation rate obtained with any 1.55 µm QD laser. The implementation of etch stop layers into the laser structure provide the possibility to fabricate feedback gratings with well defined geometries for the realization of DFB lasers. These DFB lasers were fabricated by using a combination of dry and wet etching. Single mode operation at 1.55 µm with a high side mode suppression ratio of 50 dB was achieved.

Las operaciones de mantenimiento de paz de Australia en Timor Oriental y Papúa Nueva Guinea como herramientas de seguridad nacional de 1996 a 2009

La seguridad nacional, en este caso específico la seguridad nacional australiana, no está limitada su espacio físico del territorio sino que se expande a escenarios más amplios cómo sus vecinos inmediatos (Indonesia, Timor Oriental y Papúa Nueva Guinea) e incluso la región en la que se encuentra Australia. En esta perspectiva, las operaciones de mantenimiento de paz son herramientas de la política de seguridad australiana que se han establecido debido a la necesidad de responder a los nuevos desafíos en seguridad. En este trabajo se analizarán las Operaciones de Mantenimiento de Paz en Timor Oriental (1999) y Papúa Nueva Guinea (1997) como parte de la política de seguridad nacional de Australia.

Análisis de las relaciones bilaterales entre Timor Oriental y Australia a partir de la influencia de la ubicación geopolítica de recursos petroleros y gas natural presentes en el mar de Timor. 1999-2008.

Este trabajo busca comprender el surgimiento de una nueva estructura geopolítica dentro del sistema internacional haciendo uso de la teoría de Saul Bernard Cohen. Ésta nos permite identificar dos elementos preponderantes de la ubicación geopolítica de Timor Oriental que llegan a influir en sus relaciones bilaterales con Australia. Siendo estos; las Áreas Vacías y los límites. Ellos ayudan a tejer relaciones de cooperación con respecto a la explotación de recursos energéticos y el apoyo de Australia en la construcción de Timor Oriental como Estado. Todo lo anterior, enmarcado en un contexto en el que no es claro a quién pertenecen el gas natural y el petróleo del Mar de Timor puesto que no existe un límite fronterizo determinado entre Australia y Timor Oriental.

Diágnostico de la política comercial Colombiana hacia el Japón a partir del análisis de plan estratégico exportador para Asia y Australia

La monografía pretende demostrar que el Plan Estratégico Exportador para Asia y Australia con Japón fue diseñado con base en la complementariedad de las economías, donde la dependencia de los mercados naturales y tradicionales, el desarrollo en la competitividad del comercio internacional.