Intranetin ylläpitoprosessin kehittäminen

Työn tavoitteena on tutkia intranetin ylläpitoprosessien merkitystä sisäisen viestinnän, tiedonhallinnan ja käytettävyyden kannalta. Työn kirjallisuusosuuden tavoitteena on tutustua yrityksen sisäisen viestinnän eri tekijöihin, tavoitteisiin, merkityksiin ja menetelmiin. Intranetin roolia organisaation kontekstissa tarkastellaan näkökulmista: organisaatio, tieto organisaatiossa, organisaatioiden sisäinen viestintä ja viestintäteknologian keinot sisäiseen viestintään. Kirjallisuusosan toisena tavoitteena on tutustua käyttäjäkeskeisen suunnittelun lähtökohtiin ja malleihin. Nykypäivän tuotteissa käyttäjäkeskeisyys on itsestään selvää, ja se otetaankin huomioon jo tuotesuunnittelun alkuvaiheista lähtien. Työssä tutustutaan kolmeen käyttäjäkeskeisen suunnittelun prosessimalliin: ISO 13407 –prosessimalli, Usability engineering lifecycle ja vaatimusmäärittelyn spiraalimalli. Työssä esitellään myös käyttäjäkeskeisen vaatimusmäärittelyn toteuttamiseen liittyviä vaiheita, tekijöitä ja toimenpiteitä. Työn käytännönosuudessa tarkastellaan case-yrityksen intranet-palvelun nykytilannetta ja kuvataan nykyinen ylläpitoprosessi ja sen ongelmakohdat. Työn tavoitteena on pohtia ratkaisuja näihin ongelmiin. Käytännössä tämä tarkoittaa intranetin vaatimusmäärittelyn tekemistä, jonka pohjalta voidaan tunnistaa kehityskohteet ja tehdä suunnitelma toimintojen kehittämisestä. Työn lopputuloksena saadaan prosessien kuvaus, joilla ylläpito hoituu parhaiten.

Teknologiat ja toteutustavat palvelukeskeiseen arkkitehtuuriin perustuvassa Internet-pohjaisessajärjestelmässä

Palvelukeskeiseen arkkitehtuuriin perustuvia järjestelmiä voidaan kehittää käyttämällä useita vaihtoehtoisia teknologioita. Toteuttamiseen parhaiten soveltuvia teknologioita ovat erilaiset standardikokoelmat, jotka tukevat useiden toisistaan toteutustavaltaan poikkeavien järjestelmien yhdistämistä käyttämällä standardeihin perustuvia rajapintoja. Täten kyseiset kokoelmat tukevat laajojen, useista erillisistä osista koostuvien palvelujärjestelmien kehittämistä. Tässä työssä selvitetään mikä palvelukeskeinen arkkitehtuuri on sekä millaisia komponentteja ja teknologioita kyseiseen arkkitehtuuriin perustuvan palvelujärjestelmän toteuttamiseen tarvitaan. Tavoitteena on esitellä palvelukeskeinen arkkitehtuuri ja siihen liittyvät teknologiat sekä suunnitella korkealla tasolla kyseisiä teknologioita hyödyntävä integraatioalusta käyttäjien ja useiden palvelun tarjoajien yhdistämiseksi. Työn tuloksena syntyvän teknologiaselvitysraportin selvitysluonteen vuoksi työssä ei suunnitella tarkasti toteutettavaa järjestelmää vaan ainoastaanpohjustetaan järjestelmän suunnittelua sekä esitellään siihen liittyviä arkkitehtuuri- ja toteutusmahdollisuuksia. Internet-pohjainen palvelukeskeiseen arkkitehtuuriin perustuva järjestelmä voi perustua suoriinverkon välisiin yhteyksiin tai vaihtoehtoisesti erityyppisiin välitason sovelluksiin. Välitason sovellukset mahdollistavat niiden tyypistä riippuen järjestelmän erilaisten lisäominaisuuksien toteuttamisen ja tukevat useita yleisimpiä palvelukeskeisiä teknologioita. Työn tuloksena syntyneen teknologiaselvityksen perusteella näistä teknologioista Web-palvelu -arkkitehtuuri ja siihen liittyvät menetelmät soveltuvat parhaiten suunniteltavan järjestelmän rakenneosiksi. Järjestelmän tarkemmat toteutustavat riippuvat myöhemmin määriteltävistä yksityiskohtaisista vaatimuksista sekä valittavasta välitason ohjelmiston toteutuksesta.

Benchmarking project of the Department of Electrical Engineering of Lappeenranta University of Technology

Lappeenrannan teknillisen korkeakoulun sähkötekniikan osasto muutti 1.8.2005 sähkötekniikan tutkinnon kaksiportaiseksi ja vastaamaan näin Bologna-prosessia ja Suomen yliopistolainsäädäntöä. Tutkinnonuudistuksen myötä osasto haluaa varmistaa sähkötekniikan tutkintojen laadun ja vertailtavuuden sekä parantaa opiskelijoidensekä henkilökunnan liikkuvuutta. Tutkintojen laatu ja vertailtavuus osoitetaan sähkötekniikan osaston benchmark-projektilla, jossa kerätään tietoja maisteri- ja tohtorintutkintoa tarjoavista eurooppalaisista yliopistoista. Diplomityö käsittää BM-projektin kolmannen vaiheen suunnittelun ja toteutuksen sisältäen teoriaa benchmark-projekteille tyypillisistä toimintatavoista. Hyväksi havaitut menetelmiä, kuten kyselyt ja matriisit, on tässä työssä otettu soveltuvin osin sähkötekniikan osaston BM-projektin työkaluiksi. Diplomityössä analysoidaan työkalujen avulla BM-kumppaneilta kerättyjä tietoja sekä esitetään ratkaisuja, miten sähkötekniikan osastolla voidaan jatkaa parhaiden toimintatapojen löytämistä.

Ingénieur pédagogique et démarche projet : facteurs clés de succès pour l'intégration des technologies dans la pratique enseignante?

Résumé: Les gouvernements des pays occidentaux ont dépensé des sommes importantes pour faciliter l'intégration des technologies de l'information et de la communication dans l'enseignement espérant trouver une solution économique à l'épineuse équation que l'on pourrait résumer par la célèbre formule " faire plus et mieux avec moins ". Cependant force est de constater que, malgré ces efforts et la très nette amélioration de la qualité de service des infrastructures, cet objectif est loin d'être atteint. Si nous pensons qu'il est illusoire d'attendre et d'espérer que la technologie peut et va, à elle seule, résoudre les problèmes de qualité de l'enseignement, nous croyons néanmoins qu'elle peut contribuer à améliorer les conditions d'apprentissage et participer de la réflexion pédagogique que tout enseignant devrait conduire avant de dispenser ses enseignements. Dans cette optique, et convaincu que la formation à distance offre des avantages non négligeables à condition de penser " autrement " l'enseignement, nous nous sommes intéressé à la problématique du développement de ce type d'applications qui se situent à la frontière entre les sciences didactiques, les sciences cognitives, et l'informatique. Ainsi, et afin de proposer une solution réaliste et simple permettant de faciliter le développement, la mise-à-jour, l'insertion et la pérennisation des applications de formation à distance, nous nous sommes impliqué dans des projets concrets. Au fil de notre expérience de terrain nous avons fait le constat que (i)la qualité des modules de formation flexible et à distance reste encore très décevante, entre autres parce que la valeur ajoutée que peut apporter l'utilisation des technologies n'est, à notre avis, pas suffisamment exploitée et que (ii)pour réussir tout projet doit, outre le fait d'apporter une réponse utile à un besoin réel, être conduit efficacement avec le soutien d'un " champion ". Dans l'idée de proposer une démarche de gestion de projet adaptée aux besoins de la formation flexible et à distance, nous nous sommes tout d'abord penché sur les caractéristiques de ce type de projet. Nous avons ensuite analysé les méthodologies de projet existantes dans l'espoir de pouvoir utiliser l'une, l'autre ou un panachage adéquat de celles qui seraient les plus proches de nos besoins. Nous avons ensuite, de manière empirique et par itérations successives, défini une démarche pragmatique de gestion de projet et contribué à l'élaboration de fiches d'aide à la décision facilitant sa mise en oeuvre. Nous décrivons certains de ses acteurs en insistant particulièrement sur l'ingénieur pédagogique que nous considérons comme l'un des facteurs clé de succès de notre démarche et dont la vocation est de l'orchestrer. Enfin, nous avons validé a posteriori notre démarche en revenant sur le déroulement de quatre projets de FFD auxquels nous avons participé et qui sont représentatifs des projets que l'on peut rencontrer dans le milieu universitaire. En conclusion nous pensons que la mise en oeuvre de notre démarche, accompagnée de la mise à disposition de fiches d'aide à la décision informatisées, constitue un atout important et devrait permettre notamment de mesurer plus aisément les impacts réels des technologies (i) sur l'évolution de la pratique des enseignants, (ii) sur l'organisation et (iii) sur la qualité de l'enseignement. Notre démarche peut aussi servir de tremplin à la mise en place d'une démarche qualité propre à la FFD. D'autres recherches liées à la réelle flexibilisation des apprentissages et aux apports des technologies pour les apprenants pourront alors être conduites sur la base de métriques qui restent à définir. Abstract: Western countries have spent substantial amount of monies to facilitate the integration of the Information and Communication Technologies (ICT) into Education hoping to find a solution to the touchy equation that can be summarized by the famous statement "do more and better with less". Despite these efforts, and notwithstanding the real improvements due to the undeniable betterment of the infrastructure and of the quality of service, this goal is far from reached. Although we think it illusive to expect technology, all by itself, to solve our economical and educational problems, we firmly take the view that it can greatly contribute not only to ameliorate learning conditions but participate to rethinking the pedagogical approach as well. Every member of our community could hence take advantage of this opportunity to reflect upon his or her strategy. In this framework, and convinced that integrating ICT into education opens a number of very interesting avenues provided we think teaching "out of the box", we got ourself interested in courseware development positioned at the intersection of didactics and pedagogical sciences, cognitive sciences and computing. Hence, and hoping to bring a realistic and simple solution that could help develop, update, integrate and sustain courseware we got involved in concrete projects. As ze gained field experience we noticed that (i)The quality of courseware is still disappointing, amongst others, because the added value that the technology can bring is not made the most of, as it could or should be and (ii)A project requires, besides bringing a useful answer to a real problem, to be efficiently managed and be "championed". Having in mind to propose a pragmatic and practical project management approach we first looked into open and distance learning characteristics. We then analyzed existing methodologies in the hope of being able to utilize one or the other or a combination to best fit our needs. In an empiric manner and proceeding by successive iterations and refinements, we defined a simple methodology and contributed to build descriptive "cards" attached to each of its phases to help decision making. We describe the different actors involved in the process insisting specifically on the pedagogical engineer, viewed as an orchestra conductor, whom we consider to be critical to ensure the success of our approach. Last but not least, we have validated a posteriori our methodology by reviewing four of the projects we participated to and that we think emblematic of the university reality. We believe that the implementation of our methodology, along with the availability of computerized cards to help project managers to take decisions, could constitute a great asset and contribute to measure the technologies' real impacts on (i) the evolution of teaching practices (ii) the organization and (iii) the quality of pedagogical approaches. Our methodology could hence be of use to help put in place an open and distance learning quality assessment. Research on the impact of technologies to learning adaptability and flexibilization could rely on adequate metrics.

Introducing Basic Systematic Requirements Engineering Practices in Small Organizations with an Easy to Adopt Method

Requirements-relatedissues have been found the third most important risk factor in software projects and as the biggest reason for software project failures. This is not a surprise since; requirements engineering (RE) practices have been reported deficient inmore than 75% of all; enterprises. A problem analysis on small and low maturitysoftware organizations revealed two; central reasons for not starting process improvement efforts: lack of resources and uncertainty; about process improvementeffort paybacks.; In the constructive part of the study a basic RE method, BaRE, was developed to provide an; easy to adopt way to introduce basic systematic RE practices in small and low maturity; organizations. Based on diffusion of innovations literature, thirteen desirable characteristics; were identified for the solution and the method was implemented in five key components:; requirements document template, requirements development practices, requirements; management practices, tool support for requirements management, and training.; The empirical evaluation of the BaRE method was conducted in three industrial case studies. In; this evaluation, two companies established a completely new RE infrastructure following the; suggested practices while the third company conducted continued requirements document; template development based on the provided template and used it extensively in practice. The; real benefits of the adoption of the method were visible in the companies in four to six months; from the start of the evaluation project, and the two small companies in the project completed; their improvement efforts with an input equal to about one person month. The collected dataon; the case studies indicates that the companies implemented new practices with little adaptations; and little effort. Thus it can be concluded that the constructed BaRE method is indeed easy to; adopt and it can help introduce basic systematic RE practices in small organizations.

Factors Related to Study Success at Lappeenranta University of Technology

Tutkimuksen avulla selvitettiin opintomenestykseen liittyviä tekijöitä Lappeenrannan teknillisessä korkeakoulussa (LTKK). Tutkimus liittyi opetuksen ja oppimisen kehitystyöhön tuotantotalouden osastolla. Tutkimuksen viitekehyksen muodosti oppimistuloksia selittävä malli, joka on laadittu Tynjälän (1999) kokoaman mallin perusteella. Tutkimuksen perusjoukko muodostui LTKK:n läsnä olevista perusopiskelijoista lukuun ottamatta jatko- ja vaihto-opiskelijoita. Opiskelijat jaettiin ositetulla otannalla ryhmiin, joissa suoritettiin yksinkertainen satunnaisotanta. Otoskoko oli 645 opiskelijaa. Tiedonkeruumenetelmänä oli Internet-kysely. Aineisto analysoitiin useiden kvantitatiivisten ja kvalitatiivisten menetelmien avulla. Tutkimuksen tuloksia voidaan pitää luotettavina ja tutkimuksen avulla saatiin tärkeää ja hyödyllistä tietoa opintomenestyksestä ja oppimisprosesseista. Tulosten perusteella merkittävimmät oppimistuloksiin positiivisesti liittyvät tekijät ovat syväsuuntautunut opiskelustrategia ja luottaminen omiin kykyihin, ja negatiiviset tekijät ovat oppimisen itsesäätelyn puute, omien kykyjen epäily ja pintasuuntautunut opiskelustrategia. Merkitysorientoituneet, itsesäätelykykyiset opiskelijat menestyivät LTKK:ssa parhaiten.

New Climate Change Related EC Directives and Their Interrelations to Green Electricity and Certificate Practices

Työn päätavoite on tutkia vihreän sähkön ja sertifikaattien kaupan ja EY:n uusien ilmastonmuutosta koskevien direktiivien ja direktiiviehdotusten välisiä yhteyksiä. Tutkimuksessa käsitellään direktiiviä sähköntuotannosta uusiutuvilla energialähteillä ja direktiiviehdotuksia Euroopan Unionin alueen päästökaupasta sekä yhdistetyn sähkön ja lämmön tuotannon lisäämisestä. Työ keskittyy erään suomalaisen metsäteollisuusyrityksen toimiin ilmastonmuutoksen hidastamiseksi. Tutkimus keskittyy pääosin EU:n suunnitelmaan aloittaa Unionin jäsenvaltioiden välinen päästökauppa, koska tämä järjestelmä tulee toteutuessaan olemaan teollisuuden kannalta merkittävä. Tilannetta on analysoitu neljän sellu- ja paperitehtaan hiilidioksidipäästölaskelmien avulla. Työssä kehitettyjä laskumalleja voidaan käyttää avuksi yhtiön muilla tehtailla. Tämän lisäksi työssä on luotu malli energiainvestointien arvioimiseksi tulevaisuudessa ottamalla päästöoikeuden hinnan vaikutus huomioon. Päästökaupan vaikutukset pohjoismaisilla vapautuneilla sähkömarkkinoilla on analysoity, koska teollinen sähkönhankinta on suuresti riippuvainen tästä markkinasta. Suomen metsäteollisuuden oma yhdistetty sähkön ja lämmön tuotanto erityisesti uusiutuvista energialähteistä tulee olemaan entistäkin tärkeämpää tiukentuvassa toimintaympäristössä. Tällä hetkellä on käynnissä kokeilu lisäarvon saamiseksi omalle sähköntuotannolle. Tällä haetaan kokemuksia ja valmiutta tulevaa päästökauppaa varten.

Social justice in education : how the function of selection in educational institutions predicts support for (non)egalitarian assessment practices

Educational institutions are considered a keystone for the establishment of a meritocratic society. They supposedly serve two functions: an educational function that promotes learning for all, and a selection function that sorts individuals into different programs, and ultimately social positions, based on individual merit. We study how the function of selection relates to support for assessment practices known to harm vs. benefit lower status students, through the perceived justice principles underlying these practices. We study two assessment practices: normative assessment-focused on ranking and social comparison, known to hinder the success of lower status students-and formative assessment-focused on learning and improvement, known to benefit lower status students. Normative assessment is usually perceived as relying on an equity principle, with rewards being allocated based on merit and should thus appear as positively associated with the function of selection. Formative assessment is usually perceived as relying on corrective justice that aims to ensure equality of outcomes by considering students' needs, which makes it less suitable for the function of selection. A questionnaire measuring these constructs was administered to university students. Results showed that believing that education is intended to select the best students positively predicts support for normative assessment, through increased perception of its reliance on equity, and negatively predicts support for formative assessment, through reduced perception of its ability to establish corrective justice. This study suggests that the belief in the function of selection as inherent to educational institutions can contribute to the reproduction of social inequalities by preventing change from assessment practices known to disadvantage lowerstatus student, namely normative assessment, to more favorable practices, namely formative assessment, and by promoting matching beliefs in justice principles.

Evaluation and realisation of a market entry method: The entry of a small high technology company into the British construction software markets

Tutkielman tavoitteena on tutkia, mikä olisi parhaiten case-yritykselle sopiva menetelmä tulla tekemään kauppaa ulkomaan markkinoille. Kaikki yleiset kansainvälisille markkinoilletulomenetelmät esitetään ja niiden edut ja haitat tuodaan esille. Selvittäessä tehtävänantajayrityksen resurssit, odotukset ja vaatimukset todetaan, että yhteistyössä tehtävä markkinoilletulo on pätevin vaihtoehto. Tämän jälkeen valitaan parhaiten tarkoitukseen sopiva yritys ennalta valitusta yritysvaihtoehtojen ryhmästä ja testataan tämän yrityksen yhteistyösopivuus case-yrityksen kanssa. Yritysten välinen yhteistyösopivuus arvioidaan analysoimalla yritykset haastattelujen avulla ja tutkielmassa esitettyjen teorioiden avulla. Sopivuus todetaan hyväksi, kattaen 71 prosenttia analysoiduista kohdista. Kaksikymmentäyhdeksän prosenttia kohdista todetaan kohdiksi, joissa yritysten välinen yhteisymmärrys ei ole toimeksiantajayrityksen minimivaatimukset täyttävää. Näitä kohtia tullaan käyttämään suunnittelun pohjana kun suunnitellaan jatkoneuvotteluja yhteistyön käynnistämiseksi.

Responding to Young People's Health Risks in Primary Care: A Cluster Randomised Trial of Training Clinicians in Screening and Motivational Interviewing.

OBJECTIVE: To evaluate the effectiveness of a complex intervention implementing best practice guidelines recommending clinicians screen and counsel young people across multiple psychosocial risk factors, on clinicians' detection of health risks and patients' risk taking behaviour, compared to a didactic seminar on young people's health. DESIGN: Pragmatic cluster randomised trial where volunteer general practices were stratified by postcode advantage or disadvantage score and billing type (private, free national health, community health centre), then randomised into either intervention or comparison arms using a computer generated random sequence. Three months post-intervention, patients were recruited from all practices post-consultation for a Computer Assisted Telephone Interview and followed up three and 12 months later. Researchers recruiting, consenting and interviewing patients and patients themselves were masked to allocation status; clinicians were not. SETTING: General practices in metropolitan and rural Victoria, Australia. PARTICIPANTS: General practices with at least one interested clinician (general practitioner or nurse) and their 14-24 year old patients. INTERVENTION: This complex intervention was designed using evidence based practice in learning and change in clinician behaviour and general practice systems, and included best practice approaches to motivating change in adolescent risk taking behaviours. The intervention involved training clinicians (nine hours) in health risk screening, use of a screening tool and motivational interviewing; training all practice staff (receptionists and clinicians) in engaging youth; provision of feedback to clinicians of patients' risk data; and two practice visits to support new screening and referral resources. Comparison clinicians received one didactic educational seminar (three hours) on engaging youth and health risk screening. OUTCOME MEASURES: Primary outcomes were patient report of (1) clinician detection of at least one of six health risk behaviours (tobacco, alcohol and illicit drug use, risks for sexually transmitted infection, STI, unplanned pregnancy, and road risks); and (2) change in one or more of the six health risk behaviours, at three months or at 12 months. Secondary outcomes were likelihood of future visits, trust in the clinician after exit interview, clinician detection of emotional distress and fear and abuse in relationships, and emotional distress at three and 12 months. Patient acceptability of the screening tool was also described for the intervention arm. Analyses were adjusted for practice location and billing type, patients' sex, age, and recruitment method, and past health risks, where appropriate. An intention to treat analysis approach was used, which included multilevel multiple imputation for missing outcome data. RESULTS: 42 practices were randomly allocated to intervention or comparison arms. Two intervention practices withdrew post allocation, prior to training, leaving 19 intervention (53 clinicians, 377 patients) and 21 comparison (79 clinicians, 524 patients) practices. 69% of patients in both intervention (260) and comparison (360) arms completed the 12 month follow-up. Intervention clinicians discussed more health risks per patient (59.7%) than comparison clinicians (52.7%) and thus were more likely to detect a higher proportion of young people with at least one of the six health risk behaviours (38.4% vs 26.7%, risk difference [RD] 11.6%, Confidence Interval [CI] 2.93% to 20.3%; adjusted odds ratio [OR] 1.7, CI 1.1 to 2.5). Patients reported less illicit drug use (RD -6.0, CI -11 to -1.2; OR 0·52, CI 0·28 to 0·96), and less risk for STI (RD -5.4, CI -11 to 0.2; OR 0·66, CI 0·46 to 0·96) at three months in the intervention relative to the comparison arm, and for unplanned pregnancy at 12 months (RD -4.4; CI -8.7 to -0.1; OR 0·40, CI 0·20 to 0·80). No differences were detected between arms on other health risks. There were no differences on secondary outcomes, apart from a greater detection of abuse (OR 13.8, CI 1.71 to 111). There were no reports of harmful events and intervention arm youth had high acceptance of the screening tool. CONCLUSIONS: A complex intervention, compared to a simple educational seminar for practices, improved detection of health risk behaviours in young people. Impact on health outcomes was inconclusive. Technology enabling more efficient, systematic health-risk screening may allow providers to target counselling toward higher risk individuals. Further trials require more power to confirm health benefits. TRIAL REGISTRATION: ISRCTN.com ISRCTN16059206.

The farthest need the best. Human capital composition and development-specific economic growth

We provide robust and compelling evidence of the marked impact of tertiary education on the economic growth of less developed countries and of its the relatively smaller impact on the growth of developed ones. Our results argue in favor of the accumulation of high skill levels especially in technologically under-developed countries and, contrary to common wisdom, independently of the fact that these economies might initially produce lower-technology goods or perform technology imitation. Our results are robust to the different measures used in proxying human capital and to the adjustments made for cross-country differences in the quality of education. Country-specific institutional quality, as well as other indicators including legal origin, religious fractionalization and openness to trade have been used to control for the robustness of the results. These factors are also shown to speed up technology convergence thereby confirming previous empirical studies. Our estimates tackle problems of endogeneity by adopting a variety of techniques, including instrumental variables -for both panel and cross-section analyses- and the two-step efficient dynamics system GMM.

Practices of place-making through locative media artworks

Peer-reviewed

Drivers and Barriers of Collaboration in the Value Chain of Paperboard-Packed Consumer Goods

Value chain collaboration has been a prevailing topic for research, and there is a constantly growing interest in developing collaborative models for improved efficiency in logistics. One area of collaboration is demand information management, which enables improved visibility and decrease of inventories in the value chain. Outsourcing of non-core competencies has changed the nature of collaboration from intra-enterprise to cross-enterprise activity, and this together with increasing competition in the globalizing markets have created a need for methods and tools for collaborative work. The retailer part in the value chain of consumer packaged goods (CPG) has been studied relatively widely, proven models have been defined, and there exist several best practice collaboration cases. The information and communications technology has developed rapidly, offering efficient solutions and applications to exchange information between value chain partners. However, the majority of CPG industry still works with traditional business models and practices. This concerns especially companies operating in the upstream of the CPG value chain. Demand information for consumer packaged goods originates at retailers' counters, based on consumers' buying decisions. As this information does not get transferred along the value chain towards the upstream parties, each player needs to optimize their part, causing safety margins for inventories and speculation in purchasing decisions. The safety margins increase with each player, resulting in a phenomenon known as the bullwhip effect. The further the company is from the original demand information source, the more distorted the information is. This thesis concentrates on the upstream parts of the value chain of consumer packaged goods, and more precisely the packaging value chain. Packaging is becoming a part of the product with informative and interactive features, and therefore is not just a cost item needed to protect the product. The upstream part of the CPG value chain is distinctive, as the product changes after each involved party, and therefore the original demand information from the retailers cannot be utilized as such – even if it were transferred seamlessly. The objective of this thesis is to examine the main drivers for collaboration, and barriers causing the moderate adaptation level of collaborative models. Another objective is to define a collaborative demand information management model and test it in a pilot business situation in order to see if the barriers can be eliminated. The empirical part of this thesis contains three parts, all related to the research objective, but involving different target groups, viewpoints and research approaches. The study shows evidence that the main barriers for collaboration are very similar to the barriers in the lower part of the same value chain; lack of trust, lack of business case and lack of senior management commitment. Eliminating one of them – the lack of business case – is not enough to eliminate the two other barriers, as the operational model in this thesis shows. The uncertainty of the future, fear of losing an independent position in purchasing decision making and lack of commitment remain strong enough barriers to prevent the implementation of the proposed collaborative business model. The study proposes a new way of defining the value chain processes: it divides the contracting and planning process into two processes, one managing the commercial parts and the other managing the quantity and specification related issues. This model can reduce the resistance to collaboration, as the commercial part of the contracting process would remain the same as in the traditional model. The quantity/specification-related issues would be managed by the parties with the best capabilities and resources, as well as access to the original demand information. The parties in between would be involved in the planning process as well, as their impact for the next party upstream is significant. The study also highlights the future challenges for companies operating in the CPG value chain. The markets are becoming global, with toughening competition. Also, the technology development will most likely continue with a speed exceeding the adaptation capabilities of the industry. Value chains are also becoming increasingly dynamic, which means shorter and more agile business relationships, and at the same time the predictability of consumer demand is getting more difficult due to shorter product life cycles and trends. These changes will certainly have an effect on companies' operational models, but it is very difficult to estimate when and how the proven methods will gain wide enough adaptation to become standards.

Marketing of Lappeenranta University of Technology energy auditing services

The objective of this study was to find out how LUT Energy should start marketing its energy audit services, what would be the optimal pricing policy for its services and how LUT Energy could manage customer expectations towards quality of its auditing services. In order to answer these questions, a quantitative survey questionnaire was sent by e-mail to 56 companies from the regions of South Karelia and Kymenlaakso. The empirical data of the study was the answers and opinions of the companies, previous researches about energy efficiency and articles and presentations about the current situation in the energy efficiency market. The results of the study were that there is a great potential for energy audit services and also the legislation requires companies to improve their energy efficiency. To start marketing its services, LUT Energy should first clarify its service concept and divide its service offering into two offers. It should also clarify the marketing message it wants to send its customers and then do the marketing with the help of three-way-model. The best pricing policy for the service would be that the price is proportioned to the future savings. In order to ensure the quality of its services, LUT Energy has to make sure that both dimensions of the quality are managed properly and to fade out customer expectations towards the quality the auditing work has to be monitored.

Improving demand forecasting practices in the industrial context

Demand forecasting is one of the fundamental managerial tasks. Most companies do not know their future demands, so they have to make plans based on demand forecasts. The literature offers many methods and approaches for producing forecasts. When selecting the forecasting approach, companies need to estimate the benefits provided by particular methods, as well as the resources that applying the methods call for. Former literature points out that even though many forecasting methods are available, selecting a suitable approach and implementing and managing it is a complex cross-functional matter. However, research that focuses on the managerial side of forecasting is relatively rare. This thesis explores the managerial problems that are involved when demand forecasting methods are applied in a context where a company produces products for other manufacturing companies. Industrial companies have some characteristics that differ from consumer companies, e.g. typically a lower number of customers and closer relationships with customers than in consumer companies. The research questions of this thesis are: 1. What kind of challenges are there in organizing an adequate forecasting process in the industrial context? 2. What kind of tools of analysis can be utilized to support the improvement of the forecasting process? The main methodological approach in this study is design science, where the main objective is to develop tentative solutions to real-life problems. The research data has been collected from two organizations. Managerial problems in organizing demand forecasting can be found in four interlinked areas: 1. defining the operational environment for forecasting, 2. defining the forecasting methods, 3. defining the organizational responsibilities, and 4. defining the forecasting performance measurement process. In all these areas, examples of managerial problems are described, and approaches for mitigating these problems are outlined.