Interação entre arquiteto e engenheiro de estruturas em fases preliminares da conceção estrutural: oportunidades e desafios das metodologias BIM

Dissertação de mestrado integrado em Engenharia Civil

Poly(ester-urethane) scaffolds: effect of structure on properties and osteogenic activity of stem cells

The present study aimed to investigate the effect of structure (design and porosity) on the matrix stiffness and osteogenic activity of stem cells cultured on poly(ester-urethane) (PEU) scaffolds. Different three-dimensional (3D) forms of scaffold were prepared from lysine-based PEU using traditional salt-leaching and advanced bioplotting techniques. The resulting scaffolds were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), mercury porosimetry and mechanical testing. The scaffolds had various pore sizes with different designs, and all were thermally stable up to 300â °C. In vitrotests, carried out using rat bone marrow stem cells (BMSCs) for bone tissue engineering, demonstrated better viability and higher cell proliferation on bioplotted scaffolds compared to salt-leached ones, most probably due to their larger and interconnected pores and stiffer nature, as shown by higher compressive moduli, which were measured by compression testing. Similarly, SEM, von Kossa staining and EDX analyses indicated higher amounts of calcium deposition on bioplotted scaffolds during cell culture. It was concluded that the design with larger interconnected porosity and stiffness has an effect on the osteogenic activity of the stem cells.

Classificação e organização de objetos BIM e sua aplicação em modelos 4D&5D

Dissertação de mestrado integrado em Engenharia Civil

Evaluation of fish pots as a feasible fishing method in Irish waters, with specific reference to the physiological effects of common and alternate pots on the lesser spotted dogfish (Scyliorhinus canicula).

Finfish pots have emerged as a “responsible” gear, when used in combination with conservational and technical measures to sustain fisheries. Previous trials in Irish waters have offered no published reported data and so three designs tested in the current study provide new information on this gear. The most successful traps in terms of fish catch were rigid steel framed rectangular pots used to target Conger eel. Although commercial yield was low (0.2 per trap haul), potential existed for a viable pot fishery. Deployment and storage of Norwegian floating pots was conducted with relative ease but performance in the water was poor resulting in loss of gear. Catch returns were notable even though effort was restricted as mega-faunal by-catch was a problem, which lead to ending this trial. From these initial trials it was evident that catch rates were low compared to established Norwegian fisheries (3.6 cod per pot), which resulted in the utilisation of pots, already established in the crustacean fishery, to find species readily accessible to pot capture. Although fished and designed differently, these gears provided an opportunity to establish the benefits of pot fishing to fish quality and to determine the effects on by-catch. The fishing effects of three catching methods (pots, angling and trawl) and the effects of air exposure on the physiological status of a common by-catch, the lesser spotted dogfish Scyliorhinus canícula (L.) were examined using a range of physiological biomarkers (plasma catecholamine, glucose, lactate, muscle pH and muscle lactate). Physiological responses of fish to an emersion stress regime resulted in a significant metabolic disturbance in groups, but may not have weakened the overall health of these fish, as signified in the revival of some metabolites. Plasma glucose and lactate concentrations did not however recovery to baseline levels indicating that to achieve an accurate profile, responses should be determined by a suite of biomarkers. Responses did not demonstrate that samples from the pots were significantly less stressed than for the other two methods; angling and trawling, which are in contrast to many other studies. Employment of finfish potting therefore in Irish waters needs further consideration before further promotion as a more responsible method to supplement or replace established techniques.

Computer integrated testing for the transport refrigeration systems industry.

This is a study of a state of the art implementation of a new computer integrated testing (CIT) facility within a company that designs and manufactures transport refrigeration systems. The aim was to use state of the art hardware, software and planning procedures in the design and implementation of three CIT systems. Typical CIT system components include data acquisition (DAQ) equipment, application and analysis software, communication devices, computer-based instrumentation and computer technology. It is shown that the introduction of computer technology into the area of testing can have a major effect on such issues as efficiency, flexibility, data accuracy, test quality, data integrity and much more. Findings reaffirm how the overall area of computer integration continues to benefit any organisation, but with more recent advances in computer technology, communication methods and software capabilities, less expensive more sophisticated test solutions are now possible. This allows more organisations to benefit from the many advantages associated with CIT. Examples of computer integration test set-ups and the benefits associated with computer integration have been discussed.

Experiments in square lattice with a common treatment in all blocks

This paper deals with a generalization of square lattice designs, with k² treatments in blocks of k + 1 plots, the extra plot in each block receiving a standard treatment, the same for all blocks. The new design leads to lower variances for contrasts between adjusted treatment means

Abundance, breeding and food of the Little Blue Heron Egretta caerulea (Aves, Ardeidae) in the Patos Lagoon estuary, a recently colonized area in southern Brazil

We document the expansion of the breeding distribution of the Little Blue Heron Egretta caerulea (Linnaeus, 1758) to 850 km beyond its previous southern limit in South America. In addition we present data on abundance, breeding biology and food of the species in the Patos Lagoon estuary, the area which the species recently colonized. The maximum abundance recorded in the breeding colony and in a nocturnal roosting site was 53 and 49 individuals respectively. Nesting occurred from September to March. Birds nested in a mixed breeding colony together with about 3,000 breeding pairs of seven other species of Pelecaniformes, in a swampy forest near the margin of the estuary. Five nests were between 1.5 and 4.3 m from the ground, on the shrub Daphnopsis racemosa (Thymelaeaceae), on the trees Sebastiana brasiliensis (Euphorbiaceae) and Mimosa bimucronata (Leguminosae), or on the bamboo Bambusa sp. (Poaceae). Four nests produced two fledglings each, while one nest was abandoned. Of 13 grouped samples of food regurgitated by five nestlings, Pink Shrimp Farfantepenaeus paulensis (Perez-Farfante, 1967) constituted 70% in mass, while total length of ingested fishes and shrimps varied mostly between 20 and 50 mm. Estuarine prey items represented 99% of the total food mass. The recent southward expansion of the breeding range of the Little Blue Heron in South America may be a response to climate warming of the Patos Lagoon estuary. Degradation of estuaries in the southwestern Atlantic may also be forcing the birds to breed in areas outside previous geographical range.

Shifts in composition of avian communities related to temperate-grassland afforestation in southeastern South America

Afforestation of temperate grasslands with fast-growing trees for industrial pulpwood production is spreading in South America. Despite high afforestation rates resulting from governmental policies that stimulate pulpwood production in grasslands of southern Brazil and Uruguay, the impact of this activity on biodiversity remains to be properly assessed. We used an Impact-Reference study design to evaluate how grassland afforestation affects the composition of grassland bird assemblages. We sampled eucalyptus plantations and neighboring natural grasslands in southern Brazil from 2006-2009, and relied on nested sampling and analysis to separate the effects of afforestation from the natural variability of grasslands. We recorded a significant difference in composition between assemblages from grasslands and tree plantations. Species adapted to open, treeless areas tended to be negatively affected in relation to edge or forest birds in eucalyptus plantations. Afforestation is systematically replacing the bird assemblage of hilltop grasslands by a collection of common edge and forest species that occur in nearby riverine and hillside forests. Although most grassland birds negatively affected by tree plantations are common and widespread, observed and predicted afforestation rates in southeastern South America may result in regional population reductions in the near future.

Preventive health care and payment systems to providers

Prevention has been a main issue of recent policy orientations in health care. This renews the interest on how different organizational designs and the definition of payment schemes to providers may affect the incentives to provide preventive health care. We present, both the normative and the positive analyses of the change from independent providers to integrated services. We show the evaluation of that change to depend on the particular way payment to providers is done. We focus on the externality resulting from referral decisions from primary to acute care providers. This makes our analysis complementary to most works in the literature allowing to address in a more direct way the issue of preventive health care.

Environmental management problems, future generations and social decisions

The decisions of many individuals and social groups, taking according to well-defined objectives, are causing serious social and environmental problems, in spite of following the dictates of economic rationality. There are many examples of serious problems for which there are not yet appropriate solutions, such as management of scarce natural resources including aquifer water or the distribution of space among incompatible uses. In order to solve these problems, the paper first characterizes the resources and goods involved from an economic perspective. Then, for each case, the paper notes that there is a serious divergence between individual and collective interests and, where possible, it designs the procedure for solving the conflict of interests. With this procedure, the real opportunities for the application of economic theory are shown, and especially the theory on collective goods and externalities. The limitations of conventional economic analysis are shown and the opportunity to correct the shortfalls is examined. Many environmental problems, such as climate change, have an impact on different generations that do not participate in present decisions. The paper shows that for these cases, the solutions suggested by economic theory are not valid. Furthermore, conventional methods of economic valuation (which usually help decision-makers) are unable to account for the existence of different generations and tend to obviate long-term impacts. The paper analyzes how economic valuation methods could account for the costs and benefits enjoyed by present and future generations. The paper studies an appropriate consideration of preferences for future consumption and the incorporation of sustainability as a requirement in social decisions, which implies not only more efficiency but also a fairer distribution between generations than the one implied by conventional economic analysis.

Extracció de tasques locals d'un itinerari protegit per arquitectures criptogràfiques

En aquest projecte s'ha realitzat una ampliació del llenguatge de protecció d'itineraris d'agents mòbils i la seva implementació per tal d'extreure'n les tasques locals. Aquestes tasques es troben encriptades dintre de l'itinerari de l'agent i descriuen el comportament que tindrà, així que és necessària una classe que les sàpiga extreure. El nostre compilador crea aquesta classe a partir de l'arquitectura d'extracció. L'hem provat amb les arquitectures simple i nested i els resultats amb itineraris reals han estat els esperats. A la pràctica, aquest projecte completa una mica més l'entorn de desenvolupament integrat d'agents mòbils MARISM-A.

Una arqueometria del canvi tecnològic: producció i consum d'àmfores durant el canvi d'era en la zona nord de la costa catalana

L’objectiu de la recerca és definir un marc teòric i metodològic per a l’estudi del canvi tecnològic en Arqueologia. Aquest model posa èmfasi en caracteritzar els compromisos que configuren una tecnologia i avaluar-los en funció dels factors de situació —tècnics, econòmics, polítics, socials i ideològics. S’ha aplicat aquest model a un cas d’estudi concret: la producció d’àmfores romanes durant el canvi d’Era en la província Tarraconensis. L’estudi tecnològic dels envasos s’ha realitzat mitjançant diverses tècniques analítiques: Fluorescència de raigs X (FRX), Difracció de raigs X (DRX), Microscòpia òptica (MO) i Microscòpia electrònica de rastreig (MER). Les dades obtingudes permeten, a més, establir els grups de referència per a cada centre productor d’àmfores i, així, identificar la provinença dels individus recuperats en els centres consumidors. Donat que les àmfores en estudi són artefactes dissenyats específicament per a ser estibats en una nau i servir com a envàs de transport, l’estudi inclou la caracterització de les propietats mecàniques de resistència a la fractura i de tenacitat. En aquest sentit, i per primera vegada, s’ha aplicat l’Anàlisi d’Elements Finits (AEF) per a conèixer el comportament dels diferents dissenys d’àmfora en ésser sotmesos a diverses forces d’ús. L’AEF permet simular per ordinador les activitats en què les àmfores haurien participat durant el seu ús i avaluar-ne el seu comportament tècnic. Els resultats mostren una gran adequació entre les formulacions teòriques i el programa analític implementat per a aquest estudi. Respecte el cas d’estudi, els resultats mostren una gran variabilitat en les eleccions tecnològiques preses pels ceramistes de diferents tallers, però també al llarg del període de funcionament d’un mateix taller. L’aplicació del model ha permès proposar una explicació al canvi de disseny de les àmfores romanes.

Caracteritació de models funcionals d'àmfores romanes mitjançant Finite Element Analysis

Projecte de recerca elaborat a partir d’una estada al Laboratory of Archaeometry del National Centre of Scientific Research “Demokritos” d’Atenes, Grècia, entre juny i setembre 2006. Aquest estudi s’emmarca dins d’un context més ampli d’estudi del canvi tecnològic que es documenta en la producció d’àmfores de tipologia romana durant els segles I aC i I dC en els territoris costaners de Catalunya. Una part d’aquest estudi contempla el càlcul de les propietats mecàniques d’aquestes àmfores i la seva avaluació en funció de la tipologia amforal, a partir de l’Anàlisi d’Elements Finits (AEF). L’AEF és una aproximació numèrica que té el seu origen en les ciències d’enginyeria i que ha estat emprada per estimar el comportament mecànic d’un model en termes, per exemple, de deformació i estrès. Així, un objecte, o millor dit el seu model, es dividit en sub-dominis anomenats elements finits, als quals se’ls atribueixen les propietats mecàniques del material en estudi. Aquests elements finits estan connectats formant una xarxa amb constriccions que pot ser definida. En el cas d’aplicar una força determinada a un model, el comportament de l’objecte pot ser estimat mitjançant el conjunt d’equacions lineals que defineixen el rendiment dels elements finits, proporcionant una bona aproximació per a la descripció de la deformació estructural. Així, aquesta simulació per ordinador suposa una important eina per entendre la funcionalitat de ceràmiques arqueològiques. Aquest procediment representa un model quantitatiu per predir el trencament de l’objecte ceràmic quan aquest és sotmès a diferents condicions de pressió. Aquest model ha estat aplicat a diferents tipologies amforals. Els resultats preliminars mostren diferències significatives entre la tipologia pre-romana i les tipologies romanes, així com entre els mateixos dissenys amforals romans, d’importants implicacions arqueològiques.

Pratiquer la religion ensemble : analyse des paroisses et communautés religieuses en Suisse dans une perspective de sociologie des organisations

RESUMÉ DE LA THÈSE EN FRANÇAIS La présente recherche se veut être un examen de la première enquête quantitative menée en Suisse sur les paroisses et communautés religieuses. La recherche vise de à appréhender la dynamique institutionnelle du champ religieux de ce pays. En relation avec une enquête similaire menée aux États-Unis (National Congregations Study, Chaves, 2004) la présente recherche analyse les données récoltées auprès d'un échantillon représentatif de plus de mille responsables spirituels des communautés religieuses de Suisse. Dans la perspective de la sociologie des organisations, elle examine le positionnement des communautés dans le champ institutionnel pour comprendre comment elles s'activent pour se maintenir dans la durée. Les communautés, pour assurer leurs services sur le long terme, sont imbriquées dans des structures confessionnelles avec des contraintes administratives diverses selon leur reconnaissance légale. En conséquence, la dynamique du champ religieux institutionnel est différenciée en trois environnements, selon leur degré de reconnaissance, qui demandent des réponses particulières à chacun pour pouvoir s'adapter et perdurer. Ces trois environnements poussent les groupes qui s'y logent à adopter des structures identiques. Pratiquer la religion ensemble, c'est ainsi se rendre dans une communauté avec une forme de rituel et d'engagement des membres correspondant à la reconnaissance du groupe par la société. Même pratiquée fortuitement, la religion collective est loin d'être un acte fortuit. RESUMÉ DE LA THÈSE EN ANGLAIS Practice the religion together Analysis of parishes and religious congregations in Switzerland in a perspective of sociology of organization This research is intended as a review of the first quantitative survey conducted in Switzerland on parishes and religious communities. The research aims to understand the dynamics of institutional religious field in this country. In connection with a similar survey conducted in the U.S. (National Congregations Study, Chaves, 2004) this research examines data gathered from a representative sample of over a thousand spiritual leaders of religious communities in Switzerland. From the perspective of sociology of organization, it examines the position of communities in the institutional field to understand how they are activated to maintain over time. Communities to ensure their services over the long term, are nested within denominational structures with different administrative constraints according to their legal recognition. Consequently, the dynamics of the religious field is differentiated into three institutional environments according to their degree of recognition, which require specific responses to each in order to adapt and endure. These three environments grow groups staying there to adopt identical structures.