Expressão de uma quitinase de Metarhizium anisopliae em Nicotiana tabacum : obtenção de plantas transgênicas resistentes a doenças fúngicas

A resistência a doenças em plantas transgênicas tem sido obtida por meio da expressão de genes isolados de bactérias, fungos micoparasitas e plantas. Neste trabalho, relatamos a utilização de um gene do fungo entomopatogênico Metarhizium anisopliae como modo de gerar resistência a doenças fúngicas em plantas. O gene chit1 codifica a quitinase CHIT42 (EC 3.2.1.14), pertencente a uma classe de glicosil-hidrolases capazes de converter quitina em oligômeros de N-acetil-glicosamina (NAcGlc). Quando presentes em tecidos vegetais, supõese que as quitinases ataquem especificamente a parede celular de fungos invasores, provocando danos às hifas e causando a morte por lise das células fúngicas. Deste modo, dois diferentes grupos de plantas transgênicas de Nicotiana tabacum foram produzidos: no primeiro deles, denominado chitplus, os indivíduos possuem o gene chit1 sob o controle do promotor CaMV 35S. O segundo grupo, demoninado chitless, consiste de plantas transformadas com um T-DNA não contendo o gene do fungo. Trinta e quatro plantas transgênicas resistentes à canamicina (17 de cada grupo) foram regeneradas a partir de discos de folhas infectados por Agrobacterium tumefaciens. A produção da quitinase em extratos protéicos de folhas foi analisada por zimogramas em SDS-PAGE contendo glicol-quitina e corados por calcoflúor branco, na forma de um screening dos transgênicos primários. As plantas transgênicas foram testadas, ainda, por meio de ensaios colorimétricos empregando oligômeros sintéticos de NAcGlc como substratos específicos, além de immunoblot e Western blot com soro anti-quitinase. A quantidade de enzima recombinante nas plantas chitplus variou desde nenhuma atividade detectável a elevados níveis de expressão da enzima. A hibridização de Southern blot demonstrou que o número de cópias do gene chit1 integradas no genoma vegetal foi estimado entre uma e quatro. A primeira geração de plantas transgênicas geradas por autofecundação de parentais portadores de duas cópias do transgene foi testada com relação à estabilidade da herança do transgene e em 43 de um total de 67 descendentes, originados de quatro cruzamentos independentes, o padrão de segregação não diferiu das proporções Mendelianas esperadas. Ensaios de resistência, desafiando as plantas transgênicas com o basidiomiceto Rhizoctonia solani foram realizados e uma evidente diminuição da área foliar contendo lesões fúngicas foi observada entre as linhagens transgênicas, embora variações na atividade quitinolítica tenham influenciado o nível de resistência. Nossos resultados sugerem uma relação direta entre a atividade específica de quitinase e ao aumento nos níveis de resistência às lesões causadas pela infecção por R. solani.

Busca pelo homem social nas organizações: indícios, constatações, possibilidades

This study approaches the question of organizations in search for competitiveness when globalization, knowledge and technological advances in the First World is a challenge in developing countries. The case study research focus on Bahia Sul ¿ a large organization which belongs to the important sector of paper and cellulose, especially in terms of exports. This study analyses an organization in that underpriviledged situation of a third world country in which the majority of organizational strategies are heavily thrown on people who are simultaneously reduced to instruments for economic results and who are highly demanded in terms of productivity and creativity. Due to that reality, references chosen present two key contrasting concepts. Mass man, going back to Taylor¿s blue collars as well as to Marcel¿s knowledgeable but empty words man, whose abilities do not feet his needs, in contrast with rogerian expectations of person as a mutable and continuously enriched human being and with habermasian position looking for political and decision making participation in work an social situations. Results show a strong presence of mass man, despite his technological knowledge, and scarce indications of the social man and which appears in mere aspirations out of labor situations. Conclusions emphasize a need for coherence between organizational practices in search for competitiveness and expectations on persons¿ performance because they stimulate exchanges in terms of working places for obedience and some material comfort which is aggravated by the fact that any possibility of personal fulfillment is interpreted as only possible in out of work situations. Competitiveness in such a context is not to be expected.

Valoração ambiental: aplicação de métodos de valoração em empresas dos setores mineração, papel e celulose e siderurgia

Industrial segment uses natural resources in a wide scale, but evaluate the use of these resources is a complex and new task. Few is known about existing methodologies of evaluation, mainly because of the fact that the value of this resource is more implicit than explicit. It is known that evaluation methods support the environmental accounting but the industrial community for an effective environmental management of their businesses does not yet use this tool in a regular basis. The main objective of this work is to analyze how companies who develop industrial activities on mining, siderurgy, paper and cellulose segments, are evaluating the use of natural resources for economic development, in terms of methodologies application for environment evaluation. Based on an explore research with companies from the segments previously defined in an intentional sampling and through a case study, it was possible to understand enterprise behavior according to the existing level of knowledge internalized on evaluation methodologies, to go deeper on an analysis of the premises and of the basis of the methodologies in an environmental accounting project of a paper and cellulose segment industry.

Uso da cola de fibrina na anastomose nervosa : estudo comparativo experimental, em ratos

A procura de um método que permita um melhor resultado na anastomose de um nervo completamente seccionado é antiga. Há muitos anos a técnica, dita convencional, para aproximação dos cotos afastados do nervo lesado, é realizada com pontos de fios microcirúrgicos. Mais recentemente, a utilização da cola de fibrina tem permitido a adesão de tecidos, como pele, fáscia e outras estruturas anatômicas. O uso da cola de fibrina, na aproximação das extremidades nervosas, tem sido propagada pela indústria como um fato incontestável. No entanto, somente com a realização de estudos comparativos clínicos e laboratoriais tornou-se possível comparar a eficácia da cola de fibrina como agente de reconstituição em lesões de nervos periféricos. Com o objetivo de comprovar essa afirmação foi realizado um trabalho através de uma mensuração nas bainhas de mielina de cotos regenerados de nervos entre diferentes tipos de anastomose nervosas em nervo isquiático de ratos da raça Wistar. Com esse mesmo escopo, foi mensurado o número de axônios em regeneração após o uso dessa cola. Foi utilizada uma amostra de 35 ratos divididos em 03 grupos (A, B e C). No grupo A, 25 ratos foram submetidos à cirurgia com o uso da cola de fibrina para a anastomose nervosa. No grupo B, 05 ratos foram submetidos ao mesmo procedimento; entretanto, ao reparo nervoso acrescentou-se a utilização de dois pontos opostos de mononylon 9-0, usando-se cola de fibrina no seu interior. No terceiro grupo (C), 05 ratos foram submetidos a neurorrafia com 6 a 8 pontos de mononylon 9-0 sem auxílio da cola de fibrina (anastomose nervosa convencional). Os animais foram submetidos a um novo procedimento após 90 dias, quando o nervo isquiático tratado foi retirado e encaminhado para o estudo. Após esse procedimento, os animais foram sacrificados. Cabe esclarecer que os espécimens foram submetidas a uma preparação histológica, sendo avaliados. Para tanto, foi realizada uma mensuração da espessura média da bainha de mielina das fibras regeneradas. Também foi realizada uma medição do número de axônios regenerados em um milímetro quadrado. Com base nesses achados, foram comparados os resultados.

Avaliação da eficiência de co-transformação de soja (Glycine max (L.) Merrill) via bombardeamento de partículas utilizando um gene de seleção e um gene de interesse em plamídeos diferentes

Visando aumentar a resistência a moléstias fúngicas, o presente trabalho teve como objetivo introduzir um gene (chit1) que codifica uma quitinase do fungo Metarhizium anisopliae em cultivares de soja [Glycine max (L.) Merrill]. A co-transformação foi a estratégia escolhida, visando a obtenção de plantas livres de transgenes marcadores na progênie das plantas transformadas. A co-transformação foi realizada via biolística, tendo como tecido-alvo conjuntos de embriões somáticos globulares das cultivares MG/BR46 Conquista e IAS-5. O plasmídeo pGusHyg, que contém o gene repórter gusA e o gene marcador hpt, foi bombardeado concomitantemente com o plasmídeo pMOG463chit1, que porta o gene chit1. Os conjuntos de embriões bombardeados foram transferidos para meio seletivo contendo higromicina, visando a obtenção de material estavelmente transformado. Os conjuntos embriogênicos higromicina-resistentes foram transferidos seqüencialmente para meios de proliferação D-20 (sem higromicina), maturação e regeneração. No total, foram obtidos 387 e 380 embriões histodiferenciados das cultivares MG/BR46 Conquista e IAS-5, respectivamente. Plantas transgênicas adultas e férteis foram regeneradas. Para avaliar a eficiência da estratégia de cotransformação, foram realizadas análises moleculares de embriões histodiferenciados e de plantas regeneradas. Os resultados obtidos neste trabalho permitiram o cálculo da taxa de co-transformação de 44% para os embriões histodiferenciados da cultivar MG/BR46 Conquista e de 50% para plantas de IAS-5. Não existem, até o momento, relatos de trabalhos em soja utilizando embriões somáticos globulares em proliferação como alvo para estudos de co-transformação.

Estrutura e dinâmica da interação de éteres de celulose com surfactantes

As técnicas de fluorimetria, condutometria, viscosimetria, turbidimetria, espalhamento de luz e espalhamento de raios-X a baixo ângulo (SAXS) foram empregadas no estudo da agregação de diferentes surfactantes aniônicos em presença de soluções aquosas diluídas de (hidroxipropil)celulose (HPC) 0,25% m/m, (hidroxipropilmetil)celulose (HPMC) 0,20% m/m e HPMC 0,10% m/m / NaCl 0,10 mol L-1. Também foram investigadas através de SAXS soluções concentradas de HPC (30, 40 e 50% m/m). Admitindo-se uma faixa geral de concentração, entre 10-4 e 10-1 mol L-1, foram utilizados neste estudo os surfactantes colato de sódio (CS), deoxicolato de sódio (DC), derivados dos sais biliares, e o alquilsintético dodecilsulafato de sódio (SDS). Observou-se que os polímeros contribuem diferentemente no processo de agregação de cada surfactante, evidenciado pela mudança dos valores da concentração de agregação crítica (CAC) em relação à concentração micelar crítica (CMC). Os resultados condutométricos confirmaram a interação éteres de celulose/sais biliares, embora a mesma tenha se mostrado mais fraca em relação a éteres de celulose/SDS. Os dados termodinâmicos demonstraram que a formação de agregados polímero/surfactante apresenta maior estabilidade do que as próprias micelas livres. Os resultados de viscosimetria e turbidimetria evidenciaram as diferenças estruturais entre HPC e HPMC, assim como entre os surfactantes. Através do espalhamento de luz dinâmico, verificou-se a existência de dois modos de correlação, rápido e lento. O primeiro é atribuído à cadeia polimérica isolada, agregados polímero/surfactante intramoleculares ou mesmo a micelas livres. Por sua vez, o modo lento relaciona-se a clusters poliméricos ou agregados polímero/surfactante intermoleculares. Adicionalmente, as curvas de distribuição dos tempos de relaxação demonstraram a influência de cada surfactante sobre a dinâmica dos polímeros. Tal influência é percebida antes mesmo da CAC, contrariando o modelo da interação polímero/surfactante proposto por Cabane. Os resultados de SAXS acusaram a formação de domínios líquido-cristalinos em xx soluções concentradas de HPC, assim como confirmaram a presença de micelas livres a altas concentrações de surfactantes nos sistemas diluídos. Em linhas gerais, os resultados indicaram a interação dos polímeros com SDS mais efetiva do que os mesmos polímeros e os sais biliares. No que tange à natureza do polímero, a HPC mostrou uma maior estabilidade na sua interação com os surfactantes do que a HPMC.

Entry on the Brazilian renewable power market: a case study

Conferências internacionais sobre o clima, bem como crescente conscientização sobre as questões de sustentabilidade lançaram luz sobre o papel fundamental que as energias renováveis poderiam desempenhar na transição energética. Ao contrário de combustíveis fósseis, elas podem ser regeneradas em um curto período de tempo e, por conseguinte, espera-se que sejam uma parte da solução para reduzir o aquecimento global. O Brasil sempre teve um forte setor hidrelétrico, mas agora está na vanguarda em relação a todas as outras fontes de energias alternativas, como energia eólica, biomassa o energia solar. Estas indústrias são uma promessa para um futuro próspero, graças ao potencial natural do país, bem como uma legislação de apoio, e estão atraindo muitas empresas locais e internacionais. Este estudo tem como objetivo preencher uma lacuna na literatura analisando o exemplo de uma empresa estrangeira que entra no mercado da energia renovável no Brasil. Baseando-se na literatura como um fundo conceptual, um único estudo de caso têm sido realizados para delinear todos os aspectos do processo de entrada. Neste desenvolvimento, relações causais entre as orientações estratégicas e a evolução do negócio foram identificadas. Esta pesquisa traz uma contribuição para as discussões acadêmicas sobre as dinâmicas de entrada no setor de energia renovável através de evidências do mercado brasileiro.

Purificação e caracterização parcial de uma B-D glicosidade de Artemia franciscana com ação sobre celobiose e lactose

-D-glucosidase (EC 3.2.1.21) is one of the most interesting glycosidases, especially for hydrolysis cellobiose releasing glucose, is last step degradation of cellulose. This function makes the -D-glucosidase is of great interest as a versatile industrial biocatalyst, being critical to various bio-treatment / biorefinery processes, such as bioethanol production. Hen in the report, a -D-glucosidase was extracts from protein extracted of the invertebrate marine Artemia franciscana was purified and characterized with a combination of precipitation with ammonium sulfate (0 - 30%, 30 to 50%, 50 to 80%), the fraction saturated in the range of 30 to 50% (called F-II) was applied in a molecular exclusion chromatography, in Sephacryl S-200, the fractions corresponding to the first peak of activity of -D-glucosidase were gathered and applied in a chromatography of ion exchange in Mono Q; the third peak this protein obtained chromatography, which coincides with the peak of activity of -D-glucosidase was held and applied in a gel filtration chromatography Superose 12 where the first peak protein, which has activity of -D-glucosidase was rechromatography on Superose 12. This enzyme is probably multimerica, consisting of three subunit molecular mass of 52.7 kDa (determined by SDS-PAGE) with native molecular mass of 157 kDa (determined by gel filtration chromatography on Superose 12 under the system FPLC). The enzyme was purified 44.09 times with a recovery of 1.01%. Using up p-nitrophenyl-β-D-glucopiranoside as substrate obtained a Km apparent of 0.229 mM and a Vmax of 1.109 mM.60min-1.mL-1mM. The optimum pH and optimum temperature of catalysis of the synthetic substrate were 5.0 and 45 °C, respectively. The activity of the -D-glucosidase was strongly, inhibited by silver nitrate and N- etylmaleimide, this inhibition indicates the involvement of radical sulfidrila the hydrolysis of synthetic substrate. The -D-glucosidase of Artemia franciscana presented degradativa action on celobiose, lactose and on the synthetic substrate -nitrophenyl-β-D-glucopiranoside indicating potential use of this enzyme in the industry mainly for the production of bioethanol (production of alcohol from the participating cellulose), and production hydrolysate milk (devoid of milk lactose)

Purificação, caracterização e análise da atividade bioinseticida, de um inibidor de tripsina em sementes de catanduva (Piptadenia moniliformis)

One Kunitz-type trypsin inhibitors (PmTI) was purified from Piptadenia moniliformis seeds, a tree of the sub-family Mimosoideae, by TCA precipitation, affinity chromatography on immobilized trypsin-Sepharose, DEAE cellulose (ion exchange) and Superose 12 (molecular exclusion) column FPLC/AKTA. The inhibitor has Mr of 25 kDa by SDS-PAGE and chromatography molecular exclusion. The N-terminal sequence of this inhibitor showed high homology with other family Kunitz inhibitors. This also stable variations in temperature and pH and showed a small decrease in its activity when incubated with DDT in the concentration of 100mM for 120 minutes. The inhibition of trypsin by PmTI was competitive, with Ki of 1.57 x10-11 M. The activity of trypsin was effectively inhibited by percentage of inhibition of 100%, among enzymes tested, was not detected inhibition for the bromelain, was weak inhibitor of pancreatic elastase (3.17% of inhibition) and inhibited by 76.42% elastase of neutrophils, and inhibited in a moderate, chymotrypsin and papain with percentage of inhibition of 42.96% and 23.10% respectively. In vitro assays against digestive proteinases from Lepidoptera, Diptera and Coleoptera pests were carried out. Several degrees of inhibition were found. For Anthonomus grandis and Ceratitis capitata the inhibition was 89.93% and 70.52%, respectively, and the enzymes of Zabrotes subfasciatus and Callosobruchus maculatus were inhibited by 5.96% and 9.41%, respectively, and the enzymes of Plodia. interpunctella and Castnia licus were inhibited by 59.94% and 23.67, respectively. In vivo assays, was observed reduction in the development of larvae in 4rd instar of C. capitata, when PmTI was added to the artificial diet, getting WD50 and LD50 of 0.30% and 0.33%, respectively. These results suggest that this inhibitor could be a strong candidate to plant management programs cross transgenic

Aproveitamento da fibra do epicarpo do coco babaçu em compósito com matriz epóxi: estudo do efeito do tratamento da fibra

Nowadays the environmental issues are increasingly highlighted since the future of humanity is dependent on the actions taken by man. Major efforts are being expended in pursuit of knowledge and alternatives to promote sustainable development without compromising the environment. In recent years there has been a marked growth in the development of reinforced composite fiber plants, as an alternative for economic and ecological effects, especially in the substitution of synthetic materials such as reinforcement material in composites. In this current study the chemical- physical or (thermophysics )characteristics of the babassu coconut fiber, derived from the epicarp of the fruit (Orbignyda Phalerata), which the main constituents of the fiber: Klason lignin, insoluble, cellulose, holocellulose, hemicellulose and the content of ash and moisture will be determined. A study was conducted about the superficial modification of the fibers of the epicarp babassu coconut under the influence of chemical treatment by alkalinization, in an aqueous solution of NaOH to 2.5% (m/v) and to 5.0% to improve the compatibility matrix / reinforcement composite with epoxy matrix. The results of the changes occurred in staple fibers through the use of the techniques of thermogravimetric analyses (TG) and differential scanning calorimetry (DSC). The results found on thermal analysis on samples of fiber without chemical treatment (alkalinities), and on fiber samples treated by alkalinization show that the proposed chemical treatment increases the thermal stability of the fibers and provides a growth of the surface of area fibers, parameters that enhance adhesion fiber / composite. The findings were evaluated and compared with published results from other vegetable fibers, showing that the use of babassu coconut fibers has technical and economic potential for its use as reinforcement in composites

Síntese, aplicação e avaliação do efeito do teor de fósforo da celulose fosfatada em argamassa de alvenaria com aditivo comercial a base de hidroxi-etil-metil celulose (HEMC)

Generally, cellulose ethers improves mortar properties such as water retention, workability and setting time, along with adherence to the substrate. However, a major disadvantage of the addition of cellulose ethers in mortars is the delay in hydration of the cement. In this paper a cellulose phosphate (Cp) was synthesized water soluble and has been evaluated the effect of their incorporation into mortar based on Portland cement. Cellulose phosphate obtained was characterized by spectrophotometry Fourier transform infrared (FTIR), X-ray diffraction (XRD), elemental analysis and scanning electron microscopy (SEM). Mortar compositions were formulated with varying phosphorus content in cellulose and cellulose phosphate concentrations, when used in partial or total replacement of the commercial additive based hydroxyethyl methyl cellulose (HEMC). The mortars formulated with additives were prepared and characterized by: testing in the fresh state (consistency index, water retention, bulk density and air content incorporated) and in the hardened state (absorption by capillarity, density, flexural and compression strength). In mixtures the proportion of sand:cement of 1:5 (v / v) and factor a / c = 1.31 and water were held constant. Overall, the results showed that the celluloses phosphates employed in mortars added acted significantly when partially substituting the commercial additive. With regard to consistency index, water retention and bulk density in the fresh state and absorption by capillarity and bulk density apparent in the hardened state, showed no appreciable differences as compared to the commercial additive. The incorporated air content in the fresh state reduced markedly, but did not affect other properties. The mortars with cellulose phosphate, partially replacing the commercial additive showed an improvement of the properties of flexural strength and compressive strength

Biocompósitos poliméricos obtidos a partir da fração lignocelulósica e amilácea do caroço de manga (mangifera indica), Tommy atkins

This employment has the function the utilization of mango seeds Tommy Atkins, like starch source to obtain biopolymers and fibers source and nanowhiskers cellulose also, that will be use like reinforcing fillers in micro and nanobiocomposites polymeric. The fibers in natura removed from tegument mango seed were characterized, as weel as the treated fibers and nanowhiskers of cellulose extracted from them. The starch extracted from seed s almond showed a good performance (32%) and a high purity. The chemicals analyzes, of crystallinity and morphological of the fibers in natura, treated fibers and nanowhiskers of cellulose confirmed the efficacy of the chemical treatement performed to remove amorphous constituents (hemicellulose and lignina). The thermoplastic starch (TPS) obtained from two sources, corn starch and starchy material mango, was produced in a twin screw extruder with compositon mass of 62,5% of starch, 9,4% of water and 28,1% of glycerol. The starch material mango was the main objective of this work for the production of biodegradable materials, and the starch corn was utilized during the production stage to evaluate the processability of the starch and use as parameter for comparison, according of being a conventional source for obtaining conventional comercial starch. The incorporation of fibers (6% in mass) and nanowhiskers cellulose (1% in mass) in matrix of TPS to obtain composite and nanocomposite, respectively, it was performed in single screw extruder. The biocomposites and bionanocomposites polymeric were obtained and the TPS from starchy material mango presented better results of thermal and mechanicals properties when compared to TPS corn starch. Concludes that the sediment generated of the agroindustrial processing mango used presents potencial to producing of biodegradables materials

Pirólise termoquímica de pós da fibra de coco seco em um reator de cilindro rotativo para produção de bio-óleo

This master thesis aims at developing a new methodology for thermochemical degradation of dry coconut fiber (dp = 0.25mm) using laboratory rotating cylinder reactor with the goal of producing bio-oil. The biomass was characterized by infrared spectroscopy with Fourier transform FTIR, thermogravimetric analysis TG, with evaluation of activation energy the in non-isothermal regime with heating rates of 5 and 10 °C/min, differential themogravimetric analysis DTG, sweeping electron microscopy SEM, higher heating value - HHV, immediate analysis such as evaluated all the amounts of its main constituents, i.e., lignin, cellulose and hemicelluloses. In the process, it was evaluated: reaction temperature (450, 500 and 550oC), carrier gas flow rate (50 and 100 cm³/min) and spin speed (20 and 25 Hz) to condensate the bio-oil. The feed rate of biomass (540 g/h), the rotation of the rotating cylinder (33.7 rpm) and reaction time (30 33 min) were constant. The phases obtained from the process of pyrolysis of dry coconut fiber were bio-oil, char and the gas phase non-condensed. A macroscopic mass balance was applied based on the weight of each phase to evaluate their yield. The highest yield of 20% was obtained from the following conditions: temperature of 500oC, inert gas flow of 100 cm³/min and spin speed of 20 Hz. In that condition, the yield in char was 24.3%, non-condensable gas phase was 37.6% and losses of approximately 22.6%. The following physicochemical properties: density, viscosity, pH, higher heating value, char content, FTIR and CHN analysis were evaluated. The sample obtained in the best operational condition was subjected to a qualitative chromatographic analysis aiming to know the constituents of the produced bio-oil, which were: phenol followed by sirigol, acetovanilona and vinyl guaiacol. The solid phase (char) was characterized through an immediate analysis (evaluation of moisture, volatiles, ashes and fixed carbon), higher heating value and FTIR. The non-condensing gas phase presented as main constituents CO2, CO and H2. The results were compared to the ones mentioned by the literature.

Adsorção de cobre e cromo utilizando fibra de sisal visando o tratamento da água produzida pela indústria petrolífera

Currently, the oil industry is the biggest cause of environmental pollution. The objective was to reduce the concentration of copper and chromium in the water produced by the oil industry. It was used as adsorbent natural sisal fiber Agave sp treated with nitric acid and sodium hydroxide. All vegetable fibers have physical and morphological properties that enablies the adsorption of pollutants. The basic composition of sisal is cellulose, hemicellulose and lignin. The features are typically found in the characterization of vegetable fibers, except the surface area that was practically zero. In the first stage of adsorption, it was evaluated the effect of temperature and time skeeking to optimize the execution of the factorial design. The results showed that the most feasible fiber was the one treated with acid in five hours (30°C). The second phase was a factorial design, using acid and five hours, this time was it determined in the first phase. The tests were conducted following the experimental design and the results were analyzed by statistical methods in order to optimize the main parameters that influence the process: pH, concentration (mol / L) and fiber mass/ metal solution volume. The volume / mass ratio factor showed significant interference in the adsorption process of chromium and copper. The results obtained after optimization showed that the highest percentages of extraction (98%) were obtained on the following operating conditions: pH: 5-6, Concentration: 100 ppm and mass/ volume: 1 gram of fiber/50mL solution. The results showed that the adsorption process was efficient to remove chromium and copper using sisal fibers, however, requiring further studies to optimize the process.

Pirólise rápida catalítica do capim elefante utilizando materiais mesoporosos e óxidos metálicos para deoxigenação em bio-óleo

The fast pyrolysis of lignocellulosic biomass is a thermochemical conversion process for production energy which have been very atratactive due to energetic use of its products: gas (CO, CO2, H2, CH4, etc.), liquid (bio-oil) and charcoal. The bio-oil is the main product of fast pyrolysis, and its final composition and characteristics is intrinsically related to quality of biomass (ash disposal, moisture, content of cellulose, hemicellulose and lignin) and efficiency removal of oxygen compounds that cause undesirable features such as increased viscosity, instability, corrosiveness and low calorific value. The oxygenates are originated in the conventional process of biomass pyrolysis, where the use of solid catalysts allows minimization of these products by improving the bio-oil quality. The present study aims to evaluate the products of catalytic pyrolysis of elephant grass (Pennisetum purpureum Schum) using solid catalysts as tungsten oxides, supported or not in mesoporous materials like MCM-41, derived silica from rice husk ash, aimed to reduce oxygenates produced in pyrolysis. The biomasss treatment by washing with heated water (CEL) or washing with acid solution (CELix) and application of tungsten catalysts on vapors from the pyrolysis process was designed to improve the pyrolysis products quality. Conventional and catalytic pyrolysis of biomass was performed in a micro-pyrolyzer, Py-5200, coupled to GC/MS. The synthesized catalysts were characterized by X ray diffraction, infrared spectroscopy, X ray fluorescence, temperature programmed reduction and thermogravimetric analysis. Kinetic studies applying the Flynn and Wall model were performed in order to evaluate the apparent activation energy of holoceluloce thermal decomposition on samples elephant grass (CE, CEL and CELix). The results show the effectiveness of the treatment process, reducing the ash content, and were also observed decrease in the apparent activation energy of these samples. The catalytic pyrolysis process converted most of the oxygenate componds in aromatics such as benzene, toluene, ethylbenzene, etc