Erosão dentária associada a distúrbios alimentares

Os distúrbios alimentares traduzem-se em comportamentos, quer pela falta, quer pelo excesso da ingestão de alimentos, sendo a anorexia nervosa e a bulimia as que mais frequentemente se verificam na população. O crescente aumento destes distúrbios, nomeadamente a obsessão pelos corpos magros, está relacionada com o impacto que os media têm na sociedade, uma vez que a magreza é vista como mecanismo de atracção sexual e de integração social. O diagnóstico das desordens alimentares não é fácil de ser efectuado, dado que os sinais são muitas vezes omitidos/ocultados pelos indivíduos. Os médicos dentistas podem ter um papel importante na sua detecção, dadas as manifestações precoces das alterações alimentares na cavidade oral. Há diversos sintomas comuns aos dois distúrbios alimentares como a erosão dentária, a hipersensibilidade dentinária, a hipertrofia das glândulas salivares e consequente hipossalivação, a cárie dentária, a doença periodontal, as mucosites, a candidíase oral e a queilite angular. Resultante do vómito induzido, há o aporte de ácido proveniente do conteúdo gástrico que induz alterações estruturais do esmalte e dentina, facilitando o processo de desgaste erosivo. Os fenómenos erosivos são uma das manifestações orais mais evidentes dos distúrbios alimentares. O conhecimento dos sinais, sintomas e da forma de evolução da erosão dentária, é imprescindível, e acaba por diferenciar a atuação profissional que possibilita um diagnóstico eficaz e o tratamento correto. A elaboração desta dissertação tem como objectivo reforçar a informação sobre estes fenómenos para que possam ser mais eficazmente prevenidos, diagnosticados e controlados/tratados. Para tal efectuou-se uma pesquisa na B-On, Medline/PubMed, sciELO, RCAAP e em livros, de informação válida sobre o tema. Interpôs-se limitação temporal e usaram-se as seguintes palavras-chave na seleção de artigos: “Dental erosion”, “Erosive wear”, “Anorexia”, “Bulimia”, “Eating disorders”.

Cimentos injetáveis à base de fosfatos de cálcio para vertebroplastia

O principal objectivo desta investigação foi o desenvolvimento cimentos de fosfatos de cálcio com injetabilidade melhorada e propriedades mecânicas adequadas para aplicação em vertebroplastia. Os pós de fosfato de tricálcico (TCP) não dopados e dopados (Mg, Sr e Mn) usados neste estudo foram obtidos pelo processo de precipitação em meio aquoso, seguidos de tratamento térmico de forma a obter as fases pretendidas, α− e β−TCP. A substituição parcial de iões Ca por iões dopantes mostrou ter implicações em termos de estabilidade térmica da fase β−TCP. Os resultados demonstraram que as transformações de fase alotrópicas β↔α−TCP são fortemente influenciadas por variáveis experimentais como a taxa de arrefecimento, a presença de impurezas de pirofosfato de cálcio e a extensão do grau de dopagem com Mg. Os cimentos foram preparados através da mistura de pós, β−TCP (não dopados e dopados) e fosfato monocálcico monidratado (MCPM), com meios líquidos diferentes usando ácido cítrico e açucares (sucrose e frutose) como agentes retardadores de presa, e o polietilenoglicol, a hidroxipropilmetilcelulose e a polivinilpirrolidona como agentes gelificantes. Estes aditivos, principalmente o ácido cítrico, e o MCPM aumentam significativamente a força iónica do meio, influenciando a injetabilidade das pastas. Os resultados também mostraram que a distribuição de tamanho de partícula dos pós é um factor determinante na injetabilidade das pastas cimentícias. A combinação da co-dopagem de Mn e Sr com a adição de sucrose no líquido de presa e com uma distribuição de tamanho de partícula dos pós adequada resultou em cimentos de brushite com propriedades bastante melhoradas em termos de manuseamento, microestrutura, comportamento mecânico e biológico: (i) o tempo inicial de presa passou de ~3 min to ~9 min; (ii) as pastas cimentícias foram totalmente injectadas para uma razão liquido/pó de 0.28 mL g−1 com ausência do efeito de “filter-pressing” (separação de fases líquida e sólida); (iii) após imersão numa solução durante 48 h, as amostras de cimento molhadas apresentam uma porosidade total de ~32% e uma resistência a compressão de ~17 MPa, valor muito superior ao obtido para os cimentos sem açúcar não dopados (5 MPa) ou dopados só com Sr (10 MPa); e (iv) o desempenho biológico, incluindo a adesão e crescimento de células osteoblásticas na superfície do cimento, foi muito melhorado. Este conjunto de propriedades torna os cimentos excelentes para regeneração óssea e engenharia de tecidos, e muito promissores para aplicação em vertebroplastia.

Fauna edáfica sob modelos em estágio inicial de restauração de floresta subtropical

The goal of this study was to compare areas under different forest restoration technologies in relation to abundance, richness, diversity and composition of the present fauna in the litter and soil. The treatments evaluated were: natural regeneration (RN); high diversity tree plantations (L) and nucleation (N). An area of secondary forest was included in the study as a reference of soil conditions. The experimental design was in randomized block with four replications. Samples were collected for extraction of mesofauna (October/2012; July and October/2013) and macrofauna (June and October/2013) in six points of each plot, totaling 24 samples per treatment. For collecting soil macrofauna was used TSBF method. The mesofauna was collected with a metal cylinder and extracted by Berlese-Tüllgren funnel. Litter and soil were collected separately at each point and the fauna was identified level of class/taxonomic order. The springtails were classified using morphotypes. In total, considering the mesofauna, macrofauna and three times collected were accounted 28618 organisms. In relation soil mesofauna, the evaluated technologies did not differ, after three years of restoration, in relation to total abundance of organisms and community composition. The Shannon diversity index (H), in soil mesofauna, followed a human impact gradient. This index was higher in natural regeneration, which not was undergone technical interventions and showed higher moisture in the soil. The tree planting technology, under the control of volunteer plants in total area, showed lower H index. In the case of litter mesofauna, the technologies did not differ in relation the mean richness, total abundance of organisms and community composition. Considering edaphic macrofauna, technologies did not differ in relation to the abundance and richness, and in the evaluation of June/2013, RN showed higher H index and differed in relation to the community composition of other technologies. In October/2013 evaluation, the differences between the technologies in relation to H index were narrower and these did not differ in terms of composition of soil macrofauna community. In litter macrofauna, in June/2013, the RN presented greater richness and H index when compared to other technologies and in evaluation October/2013 technologies did not differ in relation to community composition, richness and mean abundance of organisms. In the case of springtails, technologies after three years in the restoration process, did not differ in relation to the abundance, richness and composition of Collembola community for different morphotypes. The secondary forest, in relation to forest restoration technologies, presented greater abundance of saprophages, predators and greater diversity of morphotypes of springtails. From these results it, we recommended to natural regeneration by to have the lowest cost of deployment, followed by nucleation and online planting. The animals should be monitored over time, in the restoration technologies, as well as the physical and chemical characteristics of the soil, in order to understand the possible changes in the composition and diversity of organisms.

Caracterização de frutos, divergência genética e estrutura espacial de jaboticabeiras nativas de fragmento florestal em Clevelândia - PR

To design strategies for the conservation and use of genetic resources of tree species such as jaboticaba tree, it is essential to make the characterization. In southwestern Paraná region, there are several forest fragments containing native jaboticaba tree (Plinia cauliflora), whose materials have broad potential for commercial orchards or breeding programs. As is the potential genetic diversity of a population to produce different genotypes, it would be able to start in such a characterization one of these fragments. The aim was to characterize fruits of jaboticaba tree (P. caulifora) of forest fragment kept in Clevelândia - PR for the presence of phenotypic variability, seeking to identify those superiors named for future selection as farming or male parent, as well as estimate genetic divergence between them, as a complementary tool for this purpose. Also, verify the regeneration and spatial distribution of the species. For the study was defined portion of a hectare (10.000 m²), with all individuals identified, mapped, with local coordinate system, and measured height and diameter. Fruits were characterized by sensory and biochemical characteristics in two years, 70 genotypes at 2013 and 56 at 2014, and of these 33 genotypes in both years. As a pre-selection criteria was adopted the choice of 20% of the genotypes that showed the highest frequency of superiority in the evaluated characteristics of the fruit. Genetic divergence among 33 genotypes per year was analyzed. The distribution pattern and spatial association was evaluated by Ripley's K function. It was classified for the first time the following ontogenetic stages of jaboticaba tree, by plant height, seedling (from 0.01 to 0.99 m), juvenile (1.0 to 4.99 m), immature (> 5.0 m, non-reproductive), adult (reproductive). It was also have been describe for the first time the naturally occurring juxtaposed seedlings, indicating polyembryony. The number of regenerating identified in the population (seedlings: n = 2163; juveniles: n = 330; immature: n = 59) was much larger than the number of adults (n = 132). The species showed reverse J-shaped size structure standard, with high concentration of regenerating. The regeneration distribution occurs in aggregate pattern and there is seedling-adult dependence, due seed dispersal and seedling emergence closest to mothers. The jaboticaba tree regeneration is sufficient to maintain the species for long term in this population, which should serve as reference to regeneration success for other studies of this important fruiting species from Ombrofile Mixed Forests. Has been pre-selected the jaboticaba trees 7, 42, 43, 47, 54, 91, 97, 104, 105, 118, 134, 153, 154, 157, 163, 169, 177, 186, 212, J7-01 and J7- 02, and 16 and 194 the ones that can now be selected by the superior characteristics of both cycles. It was recommended to carry out hybridization between genotypes 79 and 119, and 96 to 148. The quality of fruit analyzed showed potential for use as a dual purpose serving both in natura market or processing.

Hybrid materials for biomedical applications

The increased longevity of humans and the demand for a better quality of life have led to a continuous search for new implant materials. Scientific development coupled with a growing multidisciplinarity between materials science and life sciences has given rise to new approaches such as regenerative medicine and tissue engineering. The search for a material with mechanical properties close to those of human bone produced a new family of hybrid materials that take advantage of the synergy between inorganic silica (SiO4) domains, based on sol-gel bioactive glass compositions, and organic polydimethylsiloxane, PDMS ((CH3)2.SiO2)n, domains. Several studies have shown that hybrid materials based on the system PDMS-SiO2 constitute a promising group of biomaterials with several potential applications from bone tissue regeneration to brain tissue recovery, passing by bioactive coatings and drug delivery systems. The objective of the present work was to prepare hybrid materials for biomedical applications based on the PDMS-SiO2 system and to achieve a better understanding of the relationship among the sol-gel processing conditions, the chemical structures, the microstructure and the macroscopic properties. For that, different characterization techniques were used: Fourier transform infrared spectrometry, liquid and solid state nuclear magnetic resonance techniques, X-ray diffraction, small-angle X-ray scattering, smallangle neutron scattering, surface area analysis by Brunauer–Emmett–Teller method, scanning electron microscopy and transmission electron microscopy. Surface roughness and wettability were analyzed by 3D optical profilometry and by contact angle measurements respectively. Bioactivity was evaluated in vitro by immersion of the materials in Kokubos’s simulated body fluid and posterior surface analysis by different techniques as well as supernatant liquid analysis by inductively coupled plasma spectroscopy. Biocompatibility was assessed using MG63 osteoblastic cells. PDMS-SiO2-CaO materials were first prepared using nitrate as a calcium source. To avoid the presence of nitrate residues in the final product due to its potential toxicity, a heat-treatment step (above 400 °C) is required. In order to enhance the thermal stability of the materials subjected to high temperatures titanium was added to the hybrid system, and a material containing calcium, with no traces of nitrate and the preservation of a significant amount of methyl groups was successfully obtained. The difficulty in eliminating all nitrates from bulk PDMS-SiO2-CaO samples obtained by sol-gel synthesis and subsequent heat-treatment created a new goal which was the search for alternative sources of calcium. New calcium sources were evaluated in order to substitute the nitrate and calcium acetate was chosen due to its good solubility in water. Preparation solgel protocols were tested and homogeneous monolithic samples were obtained. Besides their ability to improve the bioactivity, titanium and zirconium influence the structural and microstructural features of the SiO2-TiO2 and SiO2-ZrO2 binary systems, and also of the PDMS-TiO2 and PDMS-ZrO2 systems. Detailed studies with different sol-gel conditions allowed the understanding of the roles of titanium and zirconium as additives in the PDMS-SiO2 system. It was concluded that titanium and zirconium influence the kinetics of the sol-gel process due to their different alkoxide reactivity leading to hybrid xerogels with dissimilar characteristics and morphologies. Titanium isopropoxide, less reactive than zirconium propoxide, was chosen as source of titanium, used as an additive to the system PDMS-SiO2-CaO. Two different sol-gel preparation routes were followed, using the same base composition and calcium acetate as calcium source. Different microstructures with high hydrophobicit were obtained and both proved to be biocompatible after tested with MG63 osteoblastic cells. Finally, the role of strontium (typically known in bioglasses to promote bone formation and reduce bone resorption) was studied in the PDMS-SiO2-CaOTiO2 hybrid system. A biocompatible material, tested with MG63 osteoblastic cells, was obtained with the ability to release strontium within the values reported as suitable for bone tissue regeneration.

Atributos do solo sob modelos em estágio inicial de restauração de floresta subtropical

The replacement of native vegetation by other land uses is one of the main degrading ecosystem agents, being the most important component of terrestrial environments, natural or with different levels of human disturbance, besides being the main substrate used by plants to obtain conditions soil for its development. In this context, there is the need to adopt the use and sustainable management of land systems. The study aimed to evaluate what is forest restoration system more efficient degraded areas, based on the potential recovery of physical, chemical, carbon and biological activity in the soil. The work was conducted in a forest restoration area UTFPR- Campus two neighbors, whose experiment was established in October 2010. The experimental design is completely randomized, with four replications and experimental plot of 40 m wide by 54 m long ( 2160 m2) were collected and six sampling points per plot. The soil is classified as a Typic. The models evaluated are: 1 - natural or passive regeneration; 2 - Nucleation; 3 - Planting trees in the total area under lines fill and diversity (total planting); 4 - Reference area (forest). The collection of soil samples in layers of 0.0-0.05, 0.05-0.10, 0.10-0.20 and 0.20-0.40 m was carried out in October 2013 and evaluated physical attributes of texture, bulk density, total porosity, microporosity and soil macroporosity and stability of water in households, chemical properties, and total organic carbon (TOC) and physical particle size fractionation and soil biological activity. To find the best forest restoration model, we designed a Restoration Quality Weighted Index for each variable analyzed. Natural regeneration and total plantation showed generally better soil aggregation over 0.10 m and nucleation volume of similar porosity the forest for these layers. There were no differences between the models below 0.10 m for the variables aggregation and soil porosity. The nucleation template had the lowest bulk density, but being greater than the density in the layer forest 0.05-0.10 m, however, was similar to below 0.10 m above the ground. The models had chemical properties similar to or greater than the forest. The forest had the highest stock of COT and carbon associated with minerals (CAM), but natural regeneration was similar to the particulate organic carbon (POC) in the superficial layers of the soil (0-0.10 m), below 0, 10 m, the forest showed higher stock of COT and COP on the ground. The highest peak of C-CO2 emissions occurred in the 28-35 day range where the total plantation was similar to forest. After four years of experiments, it was found that the effect of restoration methods on physical attributes and soil carbon restricted to 0.10 m deep.

Quitosana imobilizada em suporte inerte para a adsorção de corantes alimentícios em coluna de leito fixo

O uso de corantes sintéticos na indústria de alimentos tem provocado transtornos à saúde humana e ao meio ambiente. A quitosana pode ser imobilizada em matrizes sólidas e aplicada na remoção de corantes em coluna de leito fixo. A análise da dinâmica de uma coluna de leito fixo é baseada na curva de ruptura, esta é dependente da geometria da coluna, das condições operacionais e dos dados de equilíbrio. Neste contexto, o objetivo deste trabalho foi estudar o recobrimento de esferas de vidro por quitosana e sua aplicação como adsorvente de corantes em coluna de leito fixo. No estudo do recobrimento avaliaram-se os efeitos da concentração de quitosana e dos métodos de cura. As esferas recobertas foram aplicadas em ensaios de adsorção estático e dinâmico. Inicialmente, avaliou-se o equilíbrio de adsorção através da construção de isotermas e ajuste de modelos, e após, avaliaram-se os efeitos do tipo de cura e do grau de desacetilação da quitosana. Em seguida, foram analisados os efeitos do tipo de corante e do pH, e o comportamento cinético da adsorção pela construção de curvas de ruptura e ajuste de modelos dinâmicos. A influência da altura do leito e da concentração inicial de corante sobre os parâmetros da adsorção em leito fixo foram analisados através da metodologia de superfície de resposta (MSR). Ao final, estudou-se a regeneração da coluna. Os resultados mostraram que os maiores percentuais de recobrimento foram obtidos pelos métodos físico e físico/químico, na concentração de quitosana de 0,5% (m/v). Nestas condições o percentual de recobrimento foi de 46%. Nas imagens da superfície das esferas (MEV) observou-se que as mesmas foram recobertas de forma homogênea pela quitosana. As isotermas de equilíbrio obtidas foram classificadas como do tipo V, sendo o modelo de Sips o mais adequado para representar os dados experimentais. As capacidades máximas de adsorção foram 337 mg g-1, 286 mg g-1 e 200 mg g-1 para os corantes amarelo tartrazina, amarelo crepúsculo e vermelho 40, respectivamente. A aplicação das esferas recobertas com quitosana em leito fixo mostrou-se mais adequada utilizando o método de cura físico/químico e quitosana com grau de desacetilação de 85%. A máxima capacidade de adsorção da coluna em função do corante e do pH variou de 13 a 108 mg g–1. Os modelos BDST (bed–depth–service–time), Thomas e Yoon–Nelson foram adequados para representar os dados experimentais. De acordo com a MSR, o melhor desempenho do leito foi com altura de 30 cm e concentração inicial de corante de 50 mg L-1. Nestas condições, obteve-se tempo de ruptura de 88 min, máxima capacidade da coluna de 108 mg g-1 e remoção de 86 %. Na regeneração da coluna observou-se que cerca de 75% da capacidade máxima da coluna foi mantida após cinco ciclos de adsorção–eluição. Diante do exposto, a coluna de leito fixo empacotada com esferas recobertas com quitosana mostrou-se promissora na remoção de corantes de soluções aquosas.

COMPOSIÇÃO FLORÍSTICO-ESTRUTURAL AO LONGO DE UM GRADIENTE DE BORDA EM FRAGMENTO DE FLORESTA OMBRÓFILA MISTA ALTO-MONTANA EM SANTA CATARINA

O objetivo desse estudo foi caracterizar a composição florística e a estrutura do componente arbóreo em fragmento de Floresta Ombrófila Mista Alto-Montana e avaliar a influência do efeito de borda sobre a organização, estrutura, riqueza e diversidade de espécies. Foram alocadas 50 parcelas permanentes de 10 x 20 m, divididas em cinco transeções distanciadas, no mínimo, 100 m entre si, em um fragmento florestal, no município de Bom Jardim da Serra - SC. As árvores com circunferência ≥ 15,7 cm na altura do peito (CAP) foram mensuradas (CAP e altura total), identificadas e classificadas quanto às guildas de regeneração (pioneiras, climácicas exigentes em luz e climácicas tolerantes à sombra). Os dados foram analisados por meio dos índices de valor de importância (IVI), NMDS (Nonmetric Multidimensional Scaling), modelo aditivo generalizado e regressões lineares simples. Foram observados 1.457 indivíduos arbóreos, distribuídos em 29 famílias, 43 gêneros e 55 espécies. A espécie com maior valor de importância foi Dicksonia sellowiana Hook. Não foi observada influência do efeito de borda sobre a organização, a estrutura (diâmetro médio, altura média e densidade) da comunidade e participação relativa das guildas de regeneração. No entanto, ficaram evidenciados maiores valores de diversidade, riqueza e equabilidade nas áreas de borda. Desta forma, concluí-se que parte das variações dos valores relativos à diversidade de espécies arbóreas na Floresta Ombrófila Mista Ato-Montana foi determinada pela distância da borda.

EVOLUÇÃO ESTRUTURAL DE BRACATINGAIS DA REGIÃO METROPOLITANA DE CURITIBA, PARANÁ, BRASIL

O objetivo deste trabalho foi estudar a evolução estrutural de espécies arbóreas em bracatingais, ao longo de vinte anos. A bracatinga ( Mimosa scabrella Benth.) é a espécie pioneira, de vida curta, que caracteriza os bracatingais. Sob as bracatingas forma-se um sub-bosque com outras espécies arbóreas, que vai assumindo o lugar da bracatinga com o passar dos anos e que é tratado como se fosse lenha da própria bracatinga, quando a área é cortada a cada 7 anos e a regeneração da bracatinga é novamente induzida com o uso do fogo. O processo de sucessão em bracatingais ainda não foi estudado e é útil identificar a idade em que as demais espécies passam a dominar o bracatingal. Trabalhou-se com 320 parcelas, distribuídas em bracatingais com idades variando de 3 a 20 anos, medidas entre 1998 e 2011. Foram medidos os DAP (diâmetro a altura do peito) e altura total de todas as espécies com DAP ≥ 5 cm. Observou-se que, aos 11 anos, o conjunto das espécies supera a bracatinga em número de indivíduos e aos 19 anos as espécies arbóreas já apresentam uma distribuição diamétrica semelhante ao de uma floresta em fase mais avançada. De forma geral observou-se que, após os 10 anos de idade, um bracatingal já começa a tomar forma de um capoeirão.

PRODUTOS FLORESTAIS NÃO MADEIREIROS E VALOR POTENCIAL DE EXPLORAÇÃO SUSTENTÁVEL DA FLORESTA ATLÂNTICA NO SUL DE SANTA CATARINA

Este estudo indicou os produtos florestais não madeireiros (PFNM) associados a espécies arbóreas dos remanescentes de Floresta Ombrófila Densa estudados no Sul de Santa Catarina. As espécies analisadas foram hierarquizadas com base na análise de valor potencial de exploração sustentável (VPES) dos PFNM, integrando-se às seguintes informações obtidas a partir de revisão bibliográfica: densidade, parte usada, capacidade de regeneração natural e crescimento, conhecimento sobre biologia reprodutiva e dinâmica populacional, processamento requerido e nível de injúria ou toxicidade. Os resultados obtidos evidenciam ser possível a conservação e desenvolvimento regional, a partir de alternativas sustentáveis de uso dos recursos florestais. Das 79 espécies observadas, 38 atingiram VPES igual ou superior a 10, sendo consideradas de elevado potencial de exploração sustentável de PFNM.

COMPOSIÇÃO FLORÍSTICA E CARACTERIZAÇÃO SUCESSIONAL COMO SUBSÍDIO PARA CONSERVAÇÃO E MANEJO DO PNMCBio, SOROCABA - SP

O trabalho foi realizado no Parque Natural Municipal Corredores da Biodiversidade (PNMCBio), em Sorocaba -SP, com o objetivo de avaliar a composição florística do componente arbóreo e o estágio sucessional de uma área de floresta nativa de aproximadamente 31 hectares. Para tanto, foram alocadas 64 parcelas de tamanho 10 x 10 m, distribuídas aleatoriamente na área, sendo coletados todos os indivíduos com CAP igual ou maior que 15 cm. Estimou-se a diversidade por meio do índice de diversidade de Shannon (H’) e a equabilidade por meio do índice de Pielou (J’). As espécies foram caracterizadas nos grupos sucessionais, síndrome de dispersão, categorias de ameaça, amplitude de distribuição e indicadoras do estágio de regeneração. Foram amostrados 1088 indivíduos, distribuídos em 79 espécies, 54 gêneros e 29 famílias, sendo o H’ estimado em 3,421 e o J’ em 0,78, valores próximos aos encontrados em outras áreas de formações vegetacionais similares. Foram identificadas quatro espécies ameaçadas de extinção, 11 espécies endêmicas da Mata Atlântica e duas espécies restritas à Floresta Estacional Semidecidual no domínio da Mata Atlântica. O fragmento encontra-se em estágio médio de regeneração, sendo de suma importância sua conservação e manejo para a manutenção da biodiversidade local e regional.

Adsorção de corantes têxteis aniônicos e catiônicos em resíduos do processamento de fios de algodão modificados quimicamente

The textile industry generates a large volume of high organic effluent loading whoseintense color arises from residual dyes. Due to the environmental implications caused by this category of contaminant there is a permanent search for methods to remove these compounds from industrial waste waters. The adsorption alternative is one of the most efficient ways for such a purpose of sequestering/remediation and the use of inexpensive materials such as agricultural residues (e.g., sugarcane bagasse) and cotton dust waste (CDW) from weaving in their natural or chemically modified forms. The inclusion of quaternary amino groups (DEAE+) and methylcarboxylic (CM-) in the CDW cellulosic structure generates an ion exchange capacity in these formerly inert matrix and, consequently, consolidates its ability for electrovalent adsorption of residual textile dyes. The obtained ionic matrices were evaluated for pHpcz, the retention efficiency for various textile dyes in different experimental conditions, such as initial concentration , temperature, contact time in order to determine the kinetic and thermodynamic parameters of adsorption in batch, turning comprehensive how does occur the process, then understood from the respective isotherms. It was observed a change in the pHpcz for CM--CDW (6.07) and DEAE+-CDW (9.66) as compared to the native CDW (6.46), confirming changes in the total surface charge. The ionized matrices were effective for removing all evaluated pure or residual textile dyes under various tested experimental conditions. The kinetics of the adsorption process data had best fitted to the model a pseudosecond order and an intraparticle diffusion model suggested that the process takes place in more than one step. The time required for the system to reach equilibrium varied according to the initial concentration of dye, being faster in diluted solutions. The isotherm model of Langmuir was the best fit to the experimental data. The maximum adsorption capacity varied differently for each tested dye and it is closely related to the interaction adsorbent/adsorbate and dye chemical structure. Few dyes obtained a linear variation of the balance ka constant due to the inversion of temperature and might have influence form their thermodynamic behavior. Dyes that could be evaluated such as BR 18: 1 and AzL, showed features of an endothermic adsorption process (ΔH° positive) and the dye VmL presented exothermic process characteristics (ΔH° negative). ΔG° values suggested that adsorption occurred spontaneously, except for the BY 28 dye, and the values of ΔH° indicated that adsorption occurred by a chemisorption process. The reduction of 31 to 51% in the biodegradability of the matrix after the dye adsorption means that they must go through a cleaning process before being discarded or recycled, and the regeneration test indicates that matrices can be reused up to five times without loss of performance. The DEAE+-CDW matrix was efficient for the removal of color from a real textile effluent reaching an UV-Visible spectral area decrease of 93% when applied in a proportion of 15 g ion exchanger matrix L-1 of colored wastewater, even in the case of the parallel presence of 50 g L-1 of mordant salts in the waste water. The wide range of colored matter removal by the synthesized matrices varied from 40.27 to 98.65 mg g-1 of ionized matrix, obviously depending in each particular chemical structure of the dye upon adsorption.

Evaluation of circulating endothelial progenitor cells by multicolor flow cytometry in chronic kidney disease patients

Endothelial dysfunction and impaired endothelial regenerative capacity play a key role in the pathogenesis of cardiovascular disease, which is one of the major causes of mortality in chronic kidney disease (CKD) patients. Circulating endothelial cells (CEC) may be an indicator of vascular damage, while circulating endothelial progenitor cells (EPC) may be a biomarker for vascular repair. However, the simultaneously evaluation of CEC and EPC circulating levels and its relation were not previously examined in CKD population. A blood sample (18ml) of healthy subjects (n=10), early CKD (n=10) and advanced CKD patients (n=10) was used for the isolation of early and late EPCs, CECs, and hematopoietic cells, identified by flow cytometry (BD FACSCanto™ II system) using a combination of fluorochrome-conjugated primary antibodies: CD31-PE, CD45-APC Cy7, CD34-FITC, CD117-PerCp Cy5.5, CD133-APC, CD146-Pacific Blue, and CD309-PECy7. Exclusion of dead cells was done according to a fixable viability dye staining. This eightcolor staining flow cytometry optimized protocol allowed us to accurate simultaneously identify EPCs, CECs and hematopoietic cells. In addition, it was also possible to distinguish the two subpopulations of EPCs, early and late EPCs subpopulation, by CD45intCD31+CD34+CD117-CD133+CD309-CD146- and CD45intCD31+CD34+CD117-CD133-CD309+CD146- multiple labeling, respectively. Moreover, the identification of CECs and hematopoietic cells was performed by CD45-CD31+CD34-/lowCD117-CD133-CD309-CD146+ and CD34+CD117+, respectively. The levels of CECs were non-significantly increased in early CKD (312.06 ± 91.34) and advanced CKD patients (191.43±49.86) in comparison with control group (103.23±24.13). By contrast, the levels of circulating early EPCs were significantly reduced in advanced CKD population (17.03±3.23) in comparison with early CKD (32.31±4.97), p=0.04 and control group (36.25 ± 6.16), p=0.03. In addition the levels of late EPCs were significantly reduced in both advanced (6.60±1.89), p=0.01, and early CKD groups (8.42±2.58), p=0.01 compared with control group (91.54±29.06). These results were accompanied by a dramatically reduction in the recruitment, differentiation and regenerative capacity indexes in CKD population. Taken together, these results suggest an imbalance in the process of endothelial repairment in CKD population, and further propose that the indexes of recruitment, differentiation and regenerative capacity of EPCs, may help to select the patients to benefit from guiding intervention strategies to improve cardiovascular health by inducing vascular protection.

The military in the Chamber of Deputies 1851-1870 – corporative lines of action in defense of the army

Based on our reading of the minutes of the parliamentary sessions, we shall attempt in this study to analyze the performance of army officers in the Chamber of Deputies, which, from 1851 to 1870, represented one of the most important settings for the military’s participation in politics

A preliminary examination of the relationship between compulsive exercise and shame in individuals with an eating disorder: and clinical research portfolio

Objective: To explore the relationship between compulsive exercise and shame in a clinical sample of eating disorder patients. Method: In a cross-sectional study, individuals with an eating disorder (n=21) completed self-report measures of compulsive exercise, internal shame, external shame, bodily shame, anxiety and depression. Results: Internal shame was moderately associated with compulsive exercise (r=.496, p<.05). No further variables were significantly related to compulsive exercise. Individuals with Anorexia-Nervosa and Bulimia-Nervosa did not significantly differ on any of the study variables. Discussion: Hypotheses regarding the possible nature of the relationship between compulsive exercise and shame are suggested. For instance, that compulsive exercise may serve a role in the regulation of internal shame. That compulsive exercise may act as a compensatory behaviour and be a consequence of high levels of shame. Or that internal shame may result as a response to negative perceptions of one’s exercise habits. The results are discussed in line with current literature.