Prevalence of Vitamin D Insufficiency in Brazilian Adolescents

Background/Aims: Cutaneous sun exposure and dietary vitamin D intake are important determinants of vitamin D status. The objective of the present study was to evaluate the vitamin D status of a group of healthy adolescent students living in Brazil. Methods: One hundred and thirty-six adolescents, 64 boys and 72 girls, aged 16-20 years old, living in a rural town in the state of Sao Paulo, Brazil, participated in this study. Results: The mean dietary vitamin D intake was 140 (120-156) IU/day [3.5 (3.0-3.9) mu g/day]. Only 14.9% of the students met the daily adequate intake recommendation of vitamin D. Only 27.9% practice physical activity outdoors and 17.6% of the adolescents apply sunscreen daily. The mean 25(OH)D concentration was 73.0 (22.0) nmol/l [29.2 (8.8) ng/ml]. Vitamin D insufficiency was observed in 60% of adolescents. Conclusions: The present study suggests that even in a sunny climate like Brazil the prevalence of vitamin D insufficiency in adolescents is high. Most likely this is due to low intakes of vitamin D in this group. Due to the limited extent of natural dietary sources of vitamin D, a policy of vitamin D food fortification should be considered in the future, and in the meantime greater use of vitamin D supplements in this population group should be encouraged to provide the increased amounts of this essential nutrient for optimal health. Copyright (C) 2009 S. Karger AG, Basel

The numbers of sample design for evaluation of the soil fertility

The determination of the amount of sample units that will compose the sample express the optimization of the workforce, and reduce errors inherent in the report of recommendation and evaluation of soil fertility. This study aimed to determine in three systems use and soil management, the numbers of units samples design, needed to form the composed sample, for evaluation of soil fertility. It was concluded that the number of sample units needed to compose the composed sample to determination the attributes of organic matter, pH, P, K, Ca, Mg, Al and H+Al and base saturation of soil vary by use and soil management and error acceptable to the mean estimate. For the same depth of collected, increasing the number of sample units, reduced the percentage error in estimating the average, allowing the recommendation of 14, 14 and 11 sample in management with native vegetation, pasture cultivation and corn, respectively, for a error 20% on the mean estimate.

Identification of the nuclear factor kappa-beta (NF-kB) in cortical of mice Wistar using Technovit 7200 VCR (R)

Objective: this study aimed to develop a nondecalcified bone sample processing technique enabling immunohistochemical labeling of proteins by kappa-beta nuclear factor (NF-kB) utilizing the Technovit 7200 VCR (R) in adult male Wistar rats. Study Method: A 1.8 mm diameter defect was performed 0.5mm from the femur proximal joint by means of a round bur. Experimental groups were divided according to fixing solution prior to histologic processing: Group 1- ethanol 70%; Group 2-10% buffered formalin; and Group 3- Glycerol diluted in 70% ethanol at a 70/30 ratio + 10% buffered formalin. The post-surgical periods ranged from 01 to 24 hours. Control groups included a nonsurgical procedure group (NSPG) and surgical procedures where bone exposure was performed (SPBE) without drilling. Prostate carcinoma was the positive control (PC) and samples subjected to incomplete immunohistochemistry protocol were the negative control (NC). Following euthanization, all samples were kept at 4 degrees C for 7 days, and were dehydrated in a series of alcohols at -20 degrees C. The polymer embedding procedure was performed at ethanol/polymer ratios of 70%-30%, 50%-50%, 30%-70%, 100%, and 100% for 72 hours at -20 degrees C. Polymerization followed the manufacturer`s recommendation. The samples were grounded and polished to 10-15 mu m thickness, and were deacrylated. The sections were rehydrated and were submitted to the primary polyclonal antibody anti-NF-kB on a 1:75 dilution for 12 hours at room temperature. Results: Microscopy showed that the Group 2 presented positive reaction to NF-kB, diffuse reactions for NSPG and SPBE, and no reaction for the NC group. Conclusion: The results obtained support the feasibility of the developed immunohistochemistry technique.

Taking advantage of contextualized interactions while users watch TV

While watching TV, viewers use the remote control to turn the TV set on and off, change channel and volume, to adjust the image and audio settings, etc. Worldwide, research institutes collect information about audience measurement, which can also be used to provide personalization and recommendation services, among others. The interactive digital TV offers viewers the opportunity to interact with interactive applications associated with the broadcast program. Interactive TV infrastructure supports the capture of the user-TV interaction at fine-grained levels. In this paper we propose the capture of all the user interaction with a TV remote control-including short term and instant interactions: we argue that the corresponding captured information can be used to create content pervasively and automatically, and that this content can be used by a wide variety of services, such as audience measurement, personalization and recommendation services. The capture of fine grained data about instant and interval-based interactions also allows the underlying infrastructure to offer services at the same scale, such as annotation services and adaptative applications. We present the main modules of an infrastructure for TV-based services, along with a detailed example of a document used to record the user-remote control interaction. Our approach is evaluated by means of a proof-of-concept prototype which uses the Brazilian Digital TV System, the Ginga-NCL middleware.

Theoretical Characterization of Hydrogen Polyoxides: HOOH, HOOOH, HOOOOH, and HOOO

We have investigated the polyoxides HOOH, HOOOH, HOOOOH, and HOOO employing the CCSD(T) methodology, and the correlation consistent basis sets. For all molecules, we have computed fundamental vibrational frequencies, structural parameters, rotational constants, and rotation-vibration corrections. For HOOOH, we have obtained a good agreement between our results and microwave and infrared spectra measurements, although for the symmetric OO stretch some important differences were found. Heats of formation were computed using atomization energies, and our recommendation is as follows: Delta H degrees(f,298)(HOOOH) = -21.50 kcal/mol and Delta H degrees(f,298)(HOOOOH) = -10.61 kcal/mol. In the case of HOOO, to estimate the heat of formation, we have constructed three isodesmic reactions to cancel high order correlation effects. The results obtained confirmed that the latter effects are very important for HOOO. The new Delta H degrees(f,298)(HOOO) obtained is 5.5 kcal/mol. We have also calculated the zero-point energies of DO and DOOO to correct the experimental lower limit determined for the Delta H degrees(f,298)(HOOO). The Delta(Delta ZPE) decreases the binding energy of HOOO by 0.56 kcal/mol. Employing the latter value, the new experimental lower limit for Delta H degrees(f,298)(HOOO) is 3.07 kcal/mol, just 2.4 kcal/mol lower than our determination. We expect that the fundamental vibrational frequencies and rotational constants determined for HOOOOH and DOOOOD contribute to its identification in the gas phase. The vibrational spectrum of HOOOOH shows some overlapping with that of HOOOH thus indicating that one may encounter some difficulties in its characterization. We discuss the consequences of the thermochemical properties determined in this work, and suggest that the amount of HOOO present in the atmosphere is smaller than that proposed recently in this journal (J. Phys. Chem A 2007, 111, 4727).

Alternativa förpackningsmaterial och konstruktioner för »Hackman tools«-serien

Choosing a new plastic material for a container includes several different steps. In this case,the Finnish company Hackman needed a new type of packaging material for theircutlery- and kitchentool series »Hackman tools«. The project was carried out in cooperationwith the design agency Ytterborn & Fuentes, which has Hackman as a client.Several different demands were put on the material in order to fulfill as many of the clientswishes as possible. The most urgent problem with the existing container was the difficultysfor the customer to clearly see the contents in the container. Because of this problemthe customer tried to open the container in the shop. To avoid this from happening,Hackman wanted a more transparent plastic material that still fulfilled all other necessaryproperties such as strength, viscosity, printability, sealability and exhaustion strength.The final result and recommendation of a polypropylen-plastic (Evacast) was based ondetailed studies of packaging plastics and their properties as well as discussions with plasticconvertersand suppliers. The recommended plastic is avaliable in several different modelsthat fulfill all demands on material properties, environmental aspects, cost aspects and transparency.Apart from the material problem the project also included drafting some sketches and ideason new construction solutions for the container. The construction of the exsisting containerwas also a problem because of its complexity. As a result of the change of material it has beenpossible to simplify the construction.

Samband mellan mammans BMI relaterat till amningsduration och mammans skattning av barnets hälsa : En enkätstudie

I ett internationellt perspektiv har Sverige hög amningsfrekvens, men under 2000-talet har amningsfrekvensen sjunkit och stora regionala skillnader ses. Kvinnorna rekommenderas att helamma sex månader. Mödravårdcentralen (MVC) informerar om bröstmjölkens hälsoeffekter som till exempel att bröstmjölken skyddar barn mot allergier. Forskning visar att överviktiga och feta kvinnor har kortare amningsduration, men få studier behandlar svenska förhållanden. Syfte: Syfte med fördjupningsarbetet är att studera samband mellan mammans BMI relaterat till amningsduration och mammans skattning av barnets hälsa de tre första levnadsåren. Metod: Studien är en kvantitativ retrospektiv tvärsnittstudie. Data insamlades via enkäter, 418 deltagare inkluderades. Data har analyserats med Statistical Package for the Social Sciences (SPSS). För deskriptiv och jämförande analys har parametriska och icke-parametriska analyser genomförts. Resultat: De kvinnor som inte ammade skattade sitt barns hälsa sämre vid tre års ålder i jämförelse med kvinnor som ammat någon period. Vid tre års ålder skattade kvinnor med övervikt och fetma sitt barns hälsa sämre. Slutsats: Det är viktigt att kunna identifiera kvinnor som är behov av stöd för att initiera amning och kunna bidra till anpassat stöd till dem. AbstractSweden reports high duration of breastfeeding compared to international findings. During the last century, the frequency of breastfeeding duration has decreased in Sweden, with large regional differences. Recommendation for exclusive breastfeeding is six months. Midwives provide information about healthy benefits of breast milk, such as breast milk protecting baby´s against allergies. Research has presented associations between obesity and short duration of breastfeeding. However, there is a lack of knowledge regarding women in a Swedish context. Aim: To investigate the relation between mothers BMI, duration of breastfeeding and maternal valuation of the baby´s health during the first three year of life. Method: The study is a quantitative retrospective cross-sectional study. Data was collected through questionnaires, 418 participants were included. Data was analyzed using the SPSS. For descriptive and comparative analysis parametric and nonparamateric statistics have been used.Results: Women who did not breastfed perceived their baby´s health worse at three years compared with women who did breastfeed. Women with overweight and obesity also perceived the health of their three year old worse than the other maternal group. Conclusions: It´s important to identify women who need support to initiate breastfeeding and give them customized support.

Brytmånens utformning vid trädfällning - Jämförande studier av böjmotstånd och gångjärnseffekt : Designing felling hinge in tree felling - Comparative studies of bending resistance and hinge effect

Vid trädfällning med motorsåg sparar man en så kallad brytmån som skall fungera som ett gång¬järn när trädet fälls. Om brytmånen går av tidigt finns en risk att trädet faller okontrolle¬rat. De rekommendationer som finns säger att brytmånens bredd skall göras proportionell mot trädets diameter. Genom att teoretiskt och praktiskt undersöka vilka krafter brytmånen utsätts för och vad den håller för har det varit möjligt att dra vissa slutsatser om hur en bra brytmån skall se ut. Ett viktigt resultat är att en bred brytmån (över 30-40 mm) är mycket trög att böja och inte fungerar i det avseendet att den går av redan vid små böjningar. Teoretiska be¬räkningar och praktiska försök visar att en relativt smal brytmån håller för belastningen vid rakt motlut även på stora träd. Som ny rekommendationen föreslås att brytmånens bredd inte bör vara mer än 30 mm. Av försöken kan man också dra slutsatsen att frusen ved är stel och brister tidigt, varför svår¬fällda träd inte bör fällas när veden är fryst.A felling hinge is used when felling trees by help of chain saw. If the hinge breaks early in the fall of the tree there is a great risk that the tree will fall without control. Present recommenda¬tions in Sweden say that the thickness of the felling hinge shall be made in proportion to the stem diameter. By use of theoretical and practical examinations of the forces stressing the felling hinge, and the strength of the wood itself, it has been possible to draw conclusions regarding the correct design of a felling hinge. One important result is that a thick felling hinge (over 30-40 mm) is very hard to bend and does not work well as it looses most of its strength already at a small forward bending angel. Theoretical calculations and practical tests show that a relatively narrow felling hinge will manage very well the forces when felling trees with lean opposite to the felling direction even for large trees. Our new recommendation is that the thickness of the felling hinge in normal Swedish conditions should not exceed 30 mm. Through the studies it can also be seen that frozen, brittle wood breaks at small bending angels. For that reason particularly difficult trees not should be felled when the wood is frozen.

Internet- den nya barnmorskan? : En enkätstudie om hur gravida kvinnor söker information om graviditet och förlossning via Internet

Bakgrund: Internet används globalt inom många områden och aktuell forskning visar att gravida kvinnor använder Internet till att söka information om graviditet och förlossning. En graviditet innebär många frågor hos kvinnan och kvinnor söker efter information för att få en trygghet och försäkran om att allt är normalt med deras hälsa och barnet i magen. Syfte: Syftet är att undersöka gravida kvinnors informationssökning via Internet avseende graviditet och förlossning. Metod: Beskrivande tvärsnittstudie. Datainsamling skedde via en enkätundersökning och data analyserades med deskriptiv och jämförande ansats. Resultat: Nästan alla kvinnor i undersökningen använde Internet för att söka information om graviditet och förlossning. Kvinnorna söker information om barnets utveckling, kost/näring och graviditetslängd i hög utsträckning. Högutbildade kvinnor har andra kriterier för trovärdighet på hemsidor än kvinnor med lägre utbildning. Slutsats: Barnmorskor bör vara medvetna om gravida kvinnors användning av Internet samt själva skapa sig en uppfattning om informationen som de gravida kvinnorna läser på Internet. Vår studie visar att barnmorskors rekommendation av hemsidor på Internet har stor betydelse för gravida kvinnor.  

Electrical Evaluation of a Low Concentrating PVT Collector Based on Performance Ratio

Photovoltaic Thermal/Hybrid collectors are an emerging technology that combines PV and solar thermal collectors by producing heat and electricity simultaneously. In this paper, the electrical performance evaluation of a low concentrating PVT collector was done through two testing parts: power comparison and performance ratio testing. For the performance ratio testing, it is required to identify and measure the factors affecting the performance ratio on a low concentrating PVT collector. Factors such as PV cell configuration, collector acceptance angle, flow rate, tracking the sun, temperature dependence and diffuse to irradiance ratio. Solarus low concentrating PVT collector V12 was tested at Dalarna University in Sweden using the electrical equipment at the solar laboratory. The PV testing has showed differences between the two receivers. Back2 was producing 1.8 energy output more than Back1 throughout the day. Front1 and Front2 were almost the same output performance. Performance tests showed that the cell configuration for Receiver2 with cells grouping (6- 32-32-6) has proved to have a better performance ratio when to it comes to minimizing the shading effect leading to more output power throughout the day because of lowering the mismatch losses. Different factors were measured and presented in this thesis in chapter 5. With the current design, it has been obtained a peak power at STC of 107W per receiver. The solar cells have an electrical efficiency of approximately 19% while the maximum measured electrical efficiency for the collector was approximately 18 % per active cell area, in addition to a temperature coefficient of -0.53%/ ˚C. Finally a recommendation was done to help Solarus AB to know how much the electrical performance is affected during variable ambient condition and be able to use the results for analyzing and introducing new modification if needed.

On statistical bounds of heuristic solutions to location problems

Solutions to combinatorial optimization problems, such as problems of locating facilities, frequently rely on heuristics to minimize the objective function. The optimum is sought iteratively and a criterion is needed to decide when the procedure (almost) attains it. Pre-setting the number of iterations dominates in OR applications, which implies that the quality of the solution cannot be ascertained. A small, almost dormant, branch of the literature suggests using statistical principles to estimate the minimum and its bounds as a tool to decide upon stopping and evaluating the quality of the solution. In this paper we examine the functioning of statistical bounds obtained from four different estimators by using simulated annealing on p-median test problems taken from Beasley’s OR-library. We find the Weibull estimator and the 2nd order Jackknife estimator preferable and the requirement of sample size to be about 10 being much less than the current recommendation. However, reliable statistical bounds are found to depend critically on a sample of heuristic solutions of high quality and we give a simple statistic useful for checking the quality. We end the paper with an illustration on using statistical bounds in a problem of locating some 70 distribution centers of the Swedish Post in one Swedish region. 

A stopping rule while searching for optimal solution of facility-location

Solutions to combinatorial optimization, such as p-median problems of locating facilities, frequently rely on heuristics to minimize the objective function. The minimum is sought iteratively and a criterion is needed to decide when the procedure (almost) attains it. However, pre-setting the number of iterations dominates in OR applications, which implies that the quality of the solution cannot be ascertained. A small branch of the literature suggests using statistical principles to estimate the minimum and use the estimate for either stopping or evaluating the quality of the solution. In this paper we use test-problems taken from Baesley's OR-library and apply Simulated Annealing on these p-median problems. We do this for the purpose of comparing suggested methods of minimum estimation and, eventually, provide a recommendation for practioners. An illustration ends the paper being a problem of locating some 70 distribution centers of the Swedish Post in a region.

Licenshantering av programvaror i enkommunal verksamhet : En fallstudie över licenshanteringen i Falu kommun

Forskningen visar att förändringar av informationsteknologin och en ökande anskaffning av nya programvaror har lett till underliggande problem som kan drabba heterogena programvarulicensmiljöer och stora organisationer. Underliggande problem i den stora kontexten är mjukvaruhantering. Licenshantering av programvaror är just en förgrening av det stora problemet. Stora organisationer som en kommunal verksamhet är drabbad av det här underliggande problemet på grund av komplexitet hos organisationens miljö. Att tillämpa förändringar i området programvarulicens är omöjligt utan att göra förändringar i hela den organisationsprocess som följer med det. Fallstudiens uppdrag är ett nytt omfattande område kring licenshantering av programvaror som kan vara väldigt lärorikt och en bra erfarenhet att ta del av. Uppsatsen beskriver hur en kommunal verksamhets licenshantering av programvaror ser ut och de problem som finns med den nuvarande licenshanteringsprocessen. Förarbetet med en litteraturstudie tillsammans med datagenereringsmetoderna intervjuer, dokumentstudier och observationer används för att studera fallet på djupet. Målet är att kunna ta fram de nuvarande problem som finns, analysera dem och ge rekommendation för åtgärder som det studerade fallobjektet, Falu Kommuns IT-kontor, kan använda. En rekommendation för en tydlig licenshanteringsprocessmodell anses vara ett bra akademiskt bidrag eftersom problemet med licenshanteringen av programvaror är ett generellt problem. Uppsatsens resultat är en processmodell om licenshantering av programvaror för organisationer med IT-tjänstkunder. Det är en generisk lösning som skulle kunna användas av andra kommunverksamheter och liknande organisationer.

'They would never receive you without a husband' : Paradoxical barriers to antenatal care scale-up in Rwanda

OBJECTIVE: to explore perspectives and experiences of antenatal care and partner involvement among women who nearly died during pregnancy ('near-miss'). DESIGN: a study guided by naturalistic inquiry was conducted, and included extended in-community participant observation, semi-structured interviews, and focus group discussions. Qualitative data were collected between March 2013 and April 2014 in Kigali, Rwanda. FINDINGS: all informants were aware of the recommendations of male involvement for HIV-testing at the first antenatal care visit. However, this recommendation was seen as a clear link in the chain of delays and led to severe consequences, especially for women without engaged partners. The overall quality of antenatal services was experienced as suboptimal, potentially missing the opportunity to provide preventive measures and essential health education intended for both parents. This seemed to contribute to women's disincentive to complete all four recommended visits and men's interest in attending to ensure their partners' reception of care. However, the participants experienced a restriction of men's access during subsequent antenatal visits, which made men feel denied to their increased involvement during pregnancy. CONCLUSIONS: 'near-miss' women and their partners face paradoxical barriers to actualise the recommended antenatal care visits. The well-intended initiative of male partner involvement counterproductively causes delays or excludes women whereas supportive men are turned away from further health consultations. Currently, the suboptimal quality of antenatal care misses the opportunity to provide health education for the expectant couple or to identify and address early signs of complications IMPLICATIONS FOR PRACTICE: these findings suggest a need for increased flexibility in the antenatal care recommendations to encourage women to attend care with or without their partner, and to create open health communication about women's and men's real needs within the context of their social situations. Supportive partners should not be denied involvement at any stage of pregnancy, but should be received only upon consent of the expectant mother.