Crystallographic and magnetic properties of nitride R3Fe29-xCrxN4 (R = Y, Ca, Nd, Sm, Gd, Tb, and Dy)

A systematic investigation of crystallographic and magnetic properties of nitride R3Fe29-xCrxN4 (R=Y, Ce, Nd, Sm, Gd, Tb, and Dy) has been performed. The lattice constants and unit cell volume decrease with increasing rare earth atomic number from Nd to Dy, reflecting the lanthanide contraction. After nitrogenation the relative volume expansion of each nitride is around between 5% and 7%. The nitrogenation results in a good improvement in the Curie temperature, the saturation magnetization and anisotropy fields at 4.2 K, and room temperature for R3Fe29-xCrxN4. Magnetohistory effects of R3Fe29-xCrxN4 and R3Fe29-xCrx (R=Nd and Sm) are observed in a low field of 0.04 T. First order magnetization process occurs in Sm3Fe24.0Cr5.0N4 in magnetic fields of 2.8 T at 4.2 K. After nitrogenation, the easy magnetization direction of Sm3Fe24.0Cr5.0 is changed from the easy-cone structure to the uniaxial. The good intrinsic magnetic properties of Sm3Fe24.0Cr5.0N4 make this compound a hopeful candidate for new high-performance hard magnets. (C) 1998 American Institute of Physics.

Crystallographic and magnetic properties of R3Fe29-xVxN4 (R = Y, Ce, Nd, Sm, Gd, Tb, and Dy)

A systematic investigation of crystallographic and magnetic properties of nitride R3Fe29-xVxN4 (R = Y, Ce, Nd, Sm, Gd, Tb, and Dy) has been performed. Nitrogenation leads to a relative volume expansion of about 6%. The lattice constants and unit cell volume decrease with increasing rare-earth atomic number from Nd to Dy, reflecting the lanthanide contraction. On average, the Curie temperature increases due to the nitrogenation to about 200 K compared with its parent compound. Generally speaking, nitrogenation also results in a remarkable improvement of the saturation magnetization and anisotropy fields at 4.2 K and room temperature for R3Fe29-xVxN4 compared with their parent compounds. The transition temperature indicates the spin reorientations of R3Fe29-xVxN4 for R = Nd and Sm are at around 375 and 370 K which are higher than that of R3Fe29-xVx, for R = Nd and Sm 145 and 140 K, respectively. The magnetohistory effects of R3Fe29-xVxN4 (R = Ce, Nd, and Sm) are observed in low fields of 0.04 T. After nitrogenation the easy magnetization direction of Sm3Fe26.7V2.3 is changed from an easy-cone structure to the b-axis. As a preliminary result, a maximum remanence B-r of 0.94 T, an intrinsic coercivity mu(0)H(C) of 0.75 T, and a maximum energy product (B H)(max) of 108.5 kJ m(-3) for the nitride magnet Sm3Fe26.7V2.3N4 are achieved by ball-milling at 293 K.

A direct-conversion mixer with a DC-offset cancellation for WLAN

This paper presents a 5GHz double-balanced mixer with DC-offset cancellation circuit for direct-conversion receiver compliant with IEEE 802.11a wireless LAN standard. The analog feedback loop is used, to eliminate the DC-offset at the output of the double-balanced mixer. The test results show that the mixer with DC-offset cancellation circuit has voltage conversion gain of 9.5dB at 5.15GHz, noise figure of 13.5dB, IIP3 of 7.6 dBm, 1.73mV DC-offset voltage and 67mW power with 3.3-V power supply. The DC-offset cancellation circuit has less than 0.1mm(2) additional area and 0.3mW added power dissipation. The direct conversion WLAN receiver has been implemented in a 0.35 mu m SiGe BiCMOS technology.

An adaptive frequency synthesizer architecture reducing reference sidebands

An adaptive phase-locked loop (PLL) frequency synthesizer architecture for reducing reference sidebands at the output of the frequency synthesizer is described. The architecture combines two tuning loops: one is the main loop for locking the PLL frequency synthesizer and operating all the time, the other one is auxiliary loop for reducing reference sidebands and operating only when the main loop is closely locked. A 1.8V 1GHz fully integrated CMOS dual-loop frequency synthesizer is designed in a 0.18um CMOS process. The suppression of the reference sidebands of the proposed frequency synthesizer is 13.8dB more than that of the general frequency synthesizer.

A direct-conversion mixer with DC-offset cancellation for IEEE 802.11a WLAN receiver

A DC-offset cancellation scheme in the 5GHz direct-conversion receiver compliant with IEEE 802.11a wireless LAN standard is described in this paper. It uses the analog feedback loop to eliminate the DC-offset at the output of the double-balanced mixer. The mixer has a simulation voltage conversion gain of IMB at 5.2GHz, noise figure of 9.67dB, IIP3 of 7.6dBm. The solution provides 39.1dB reduction according to the leakage value at LO and mixer load resistors, the additional noise figure added to mixer is less than 0.9dB, the added power dissipation is 0.1mW and was fabricated in 60GHz 0.35 mu m SiGe BiCMOS technology.

Simulation of a monolithically integrated CMOS bioamplifier for EEG recordings

A monolithically integrated CMOS bioamplifier is presented in this paper for EEG recording applications. The capacitive-coupled circuit input structure is utilized to eliminate the large and random DC offsets existing in the electrode-tissue interface. Diode-connected NMOS transistors with negative voltage between gate and source are candidates for large resistors necessary to the bioamplifier. A passive BEF (Band Eliminator Filter) can reduce 50 Hz noise disturbance strength by more than 60 dB. A novel analysis approach is given to help determine the noise power spectral density. Simulation results show that the two-stage CMOS bioamplifier in a closed-loop capacitive feedback configuration,provides an AC in-band gain of 39.6 dB, a DC gain of zero, and an input-referred noise of 87 nVrms integrated from 0.01 Hz to 100 Hz.

Circuit design and simulation of a CMOS-based preamplifier for brain neural signals

A novel CMOS-based preamplifier for amplifying brain neural signal obtained by scalp electrodes in brain-computer interface (BCI) is presented in this paper. By means of constructing effective equivalent input circuit structure of the preamplifier, two capacitors of 5 pF are included to realize the DC suppression compared to conventional preamplifiers. Then this preamplifier is designed and simulated using the standard 0.6 mu m MOS process technology model parameters with a supply voltage of 5 volts. With differential input structures adopted, simulation results of the preamplifier show that the input impedance amounts to more than 2 Gohm with brain neural signal frequency of 0.5 Hz-100 Hz. The equivalent input noise voltage is 18 nV/Hz(1/2). The common mode rejection ratio (CMRR) of 112 dB and the open-loop differential gain of 90 dB are achieved.

Spectrum shape compression and pedestal elimination employing a Sagnac loop

We report on the experimental demonstration of a spectrum shaping filter, which is formed by inserting a fiber polarization controller (PC) in to a Sagnac loop. Pedestal free and narrow spectrum with line width at 1.4-1.7 nm is obtained, which is advantageous for further power amplification and effective frequency doubling. (C) 2008 Elsevier B.V. All rights reserved.

M_2RSbO_6:R~(3+)复合氧化物的合成组成结构和性能的研究(M = Ba、Sr、Ca, R = La、Gd、Y、Bi, R' = Sm、Eu、Dy、Ho、Er、Tm)

对于稀土与非稀土所组成的二元复合氧化物的研究国外已有较多的报导。但是，对于稀土和锑的复合氧化物只是近年来才开始有些研究工作。含锑与稀土的多元复合氧化物的报导就更少。本文在我们实验室张静筠等人三元复合氧化物研究的基础上，开展Mo—Sb_2O_5—R_2O_3—R'_2O_3—Bi_2O_3多元体系的研究工作，这对于我国丰产元素稀土和锑的应用以及利用Bi~(3+)的激活与敏化将是有益的。本文按Thornton等人的方法合成了Ba_2BiSbO_6，Ba_2GdSbO_6，按EγΦECEHKO等人的方法合成了M_2RSbO_6 (M = Ba、Sr、Ca, R = La Y)。并以M_2RSbO_6为基质，掺Sm~(3+)、Eu~(3+)、Dy~(3+)、Ho~(3+)、Er~(3+)、Tm~(3+)和Bi~(3+)，研究它们的化学组成，晶体结构与发光性能的关系及规律，Bi~(3+)的荧光和敏作用。同时研究了它们的磁学和热学性能。化学组成的分析结果表明，计算的含量与实验测得的含量符合较好，说明化学反应是按化学计量比进行的。通过X-射线粉沫物相分析和晶胞参数的理论计算确定M_2RSbO_6(M = Ba、Sr、R = La、Y、Gd、Bi)复合氧化物是属于立方钙钛太型化合物。空间群为Fm3m，点群为Oh。用计算机计算了Ca_2YSbO_6的晶胞参数并结合荧光光谱分析确定它属于畸变的单斜钙钛矿，空间群为P_(21)。用磁天平测量了样品M_2RSbO_6 (M = Ba、Sr、Ca; R = Gd、Y、Bi)的磁化率。除Ba_2GdSbO_6是顺磁性物质外共余的都是反磁性的物质。按所用原料Sb_2O_5计算的磁化率与测量值符合较好，表明在所研究的M_2RSbO_6化合物中锑是正五价的。用热重热差分析仪测量了样品在反应中的热性能，观察到在化合物形成的过程中所用原料Sb_2O_3大约在520 ℃左右氧化变为Sb_2O_5。除所用原料碳酸盐分解外没有挥发性的物质，这就进一步证明化学组成分析和磁化率测量的结果是正确的。光学测量的结果表明，所有的磷光体随着激活离子浓度的不同其光谱都发生规律性的变化。对于不同Eu~(3+)浓度的Ba_2YSbO_6:Eu~(3+)和Br_2YSbO_6:Eu~(3+), Bi~(3+)体系用254nm激发时均能观察到Eu~(3+)于595nm的尖峰发射。用基质和Bi~(3+)的激发峰325nm激发时，明显地看到敏化剂Bi~(3+)到Eu~(3+)的能量传递，使Eu~(3+)于595nm的发射大大增强，我们认为Bi~(3+)对Eu~(3+)的敏化作用是由于基质和Bi~(3+)的~1S。→ 3P_1的跃迁吸收了激发的能量，然后无辐射弛豫到Eu~(3+)的激发态~5D_0，产生~5D_0 → 7F_1的磁偶极跃迁。对于不同Eu~(3+)浓度的Sr_2YSbO_6:Eu~(3+)和Sr_2YSbO_6:Eu~(3+), Bi~(3+)体系用245nm激发时均能观察到Eu~(3+)于595nm的尖峰发射。用基质和Bi~(3+)的激发峰335nm激发时，观察到基质和Bi~(3+)对Eu~(3+)具有某种能量传递。敏化作用机理与上述的Ba_2YSbO_6:Eu~(3+)和Ba_2YSbO_6:Eu~(3+), Bi~(3+)体系相同。对于不同Eu~(3+)浓度的Ca_2YSbO_6:Eu~(3+)和Ca_2YSbO_6:Eu~(3+), Bi~(3+)体系用396nm激发时，均能观察到Eu~(3+)于613nm很强的尖峰发射。用基质和Bi~(3+)的激发峰313nm激发时，见到Bi~(3+)和基质对Eu~(3+)具有某种能量传递，这种敏化作用主要是由于基质和Bi~(3+)的3P_1 → ~1S_0的400nm的宽带发射和Eu~(3+)的~7F_0 → ~5L_6的396nm的吸收相匹配产生~5L_6→~5D_0→~7F_2的跃迁。通过对激发光谱和荧光光谱的分析给出了Ca_2Y_(0.96)Eu_(0.04)SbO_6的能级图，从实验上可见，Eu~(3+)的发光强烈地依赖于钙钛矿的结构，当Eu~(3+)在空间群为Fm3m 的Ba_2YSbO_6和Sr_2YSbO_6中处于Oh点对称性时，主要是~5D_0 → ~7F_1的磁偶极跃迁。当Eu~(3+)在空间群为P_(21)的单斜钙钛矿中时，主要是~5D_0 → ~7F_2的电偶极跃迁。对于不同掺杂浓度M_2YSbO_6:R~(13+)(M = Ba、Ca; R' = Sm、Dy、Ho、Er、Tm)体系，通过激发和荧光光谱的研究，合理地确定了谱项。发现基质对Sm~(3+)、Dy~(3+)、Ho~(3+)具有敏化作用。对不同Bi~(3+)浓度的Ca_2YSbO_6:Bi~(3+)，由激发和荧光光谱可见Bi~(3+)具有二个激发带，第一激发带位于240nm处相当于~1S_0 → ~1P_1的跃迁，第二激发带位于315nm处相当于~1S_0 → ~3P_1的跃迁。有一个很强的兰紫色发射位于400nm处相当于~3P_1 →~1S_0的跃迁。

高Tc超导体R_1Ba_2Cu_3O_(2-x)(R-rare earth)的磁性和超异电性研究

本论文合成了R_1Ba_2Cu_3O_(2-x) (R = La、Nd、Sm、Eu、Gd、Dr、Ho、Er、Tm、Yb)、Y_2Ba_2Cu_3O_(2-x) (x = 0.10～1.17)和Y_1Ba_2Cu_3O_(7-x)S_x (x = 0～2)，并对磁性和超导电性进行了较为系统的研究。R_1Ba_2Cu_3O_(2-x)的磁化率在T > Tc的很宽的温度范围内服从Curic-Weiss定律，求得的有效磁矩略大于理论值，差值与Y_1Ba_2Cu_3O_(2-x)中Cu~(2+)磁矩相近，说明Cu~(2+)的磁矩对体系磁性有额外贡献，这贡献随R~(3+)离子中自旋平行的电子权的增多而增大。其高温下的磁化率CT > 700K)相对Curic-Weiss定律发生较大偏离，这偏离可能的来源有三个：高温下稀土离子发生较大的能级反转效应，高温下结构相变对磁性的影响，高温下氧含量减少造成Cu~(2+)磁矩增大。R_1Ba_2Cu_3O_(2-x)磁化率在T < Tc时也服从Curic-Weiss定律，R~(3+)磁矩是定域的，表明超导与磁性相互独立。互不相关，稀土磁矩与传导电子间无相互作用。用Sr取代R_1Ba_2Cu_3O_(2-x)中的Ba，没能使体系产生磁有序的变化，但却使有效磁矩增大，并完全破坏了样品的超导电性。Sm~(3+)磁化率不服从Curic-Weiss定律，在Sm_1Ba_2Cu_3O_(2-x)中Sm~(3+)显示了典型Van VlccK离子的特性。Y_1Ba_2Cu_3O_(2-x)随氧含量减少发生超导体一半导体一绝缘体的转化，当氧含量由6.90减小至6.49时发生由正交到四方的结构相变。当(7-x) = 5.83时有较多杂质相出现，123相开始分解。样品磁化率均服从Curic-Weiss定律，并随氧含量增大磁化率－温度曲线越来越趋于平缓（直线），当(7-x) = 6.90时磁化率基本不随温度变化，这时Pauli顺磁性占主导地位，这说明氧含量增加定域磁矩减少，求得的有效磁矩Peff随氧含量增大总趋势减小。提出了电子“巡游”的观点，较好地解释了上述现象，并推测出Cu(2)的d电子是离域的，对样品磁矩没有贡献，样品Peff来源于部分Cu(1)的定域Cu~(2+)的磁矩，上述推测被EPR结果证实。正交相Y_1Ba_2Cu_3O_(2-x)的EPR谱显示了中心对称成准立方晶场中Cu~(2+)(d~9, S = 1/2, I = 3/2)的EPR物性。而四方相样品的EPR谱却出现了明显的各向异性，说明观察到的为Cu(1)的EPR信号，由Cu(1)~(2+)的写域磁矩产生。Y_1Ba_2Cu_3O_(2-x)的EPR信号束源于本体相，而非Y_2Cu_2O_5、BaCuO_2、Y_2BaCuO_5等杂质相。各样品EPR信号的自旋浓度远小于1spin/cu，并随氧含量减小而增大，当(7-x) = 6.49、6.40时自旋浓度出现陡增，这时伴随由正交到四方的转化，证明了电子“巡游”观点的正确。用硫部分取代Y_1Ba_2Cu_3O_2g中的氧，当Y_1Ba_2Cu_3O_(2-x)Sx中x = 0.11时Tc = 92.6K，比Y_1Ba_2Cu_3O_(7-x)升高2K，但由于杂质相的存在，ΔTc加宽。其他样品多为半导体和绝缘体。硫取代0，当x = 0.04，0.06，0.11和1.20时磁化率服从Curic-Weiss定律，并且x = 0.87，1.2时分别在230K、240K出现反铁磁有序。其他样品由于Cu被还原为＋1价而变成抗磁性。x = 0.11 (Tc = 92.6K)，EPR谱为正交场中Cu~(2+)的信号。自旋浓度与温度无关。当所有Cu均为Cu~(1+)时，测问的是-s-的EPR信号，而Cu为混合价态(+1和+2时)测问是上述两种信号的叠加。