Modelos Masculinos e Femininos no Oeste Americano de Annie Proulx

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Línguas, Literaturas e Culturas – Estudos Ingleses e Norte-Americanos

Influência do teor em pozolana na reatividade e nas características mecânicas de argamassas

Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Perfil de Construção

Trypanosoma cruzi in marsupial didelphids (Philander frenata and Didelhis marsupialis): differences in the humoral immune response in natural and experimental infections

Philander frenata and Didelphis marsupialis harbor parasitism by Trypanosoma cruzi without developing any apparent disease and on the contrary to D. marsupialis, P. frenata maintains parasitism by T. cruzi II subpopulations. Here we compared the humoral immune response of the two didelphids naturally and experimentally infected with T. cruzi II group, employing SDS-PAGE/Western blot techniques and by an Indirect immunofluorescence assay. We also studied the histopathological pattern of naturally and experimentally infected P. frenata with T. cruzi. P. frenata sera recognized more antigens than D. marsupialis, and the recognition pattern did not show any change over the course of the follow up of both didelphid species. Polypeptides of 66 and 90kDa were the most prominent antigens recognized by both species in the soluble and enriched membrane fractions. P. frenata recognized intensely also a 45kDa antigen. Our findings indicate that: 1) there were no quantitative or qualitative differences in the patent or subpatent phases in the recognition pattern of P. frenata; 2) the significant differences in the recognition pattern of parasitic antigens by P. frenata and D. marsupialis sera suggest that they probably "learned" to live in harmony with T. cruzi by different strategies; 3) although P. frenata do not display apparent disease, tissular lesions tended to be more severe than has been described in D. marsupialis; and 4) Both didelphids probably acquired infection by T. cruzi after their evolutionary divergence.

Electrodialytic remediation of two types of air pollution control residues and their applicability in construction materials

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente Perfil de Engenharia de Sistemas Ambientais

Argamassas de cal aérea e metacaulino influência do traço, da cura marítima e da idade

Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Perfil Construção

Molecular characterization of clinical multiresistant isolates of Acinetobacter sp. from hospitals in Porto Alegre, State of Rio Grande do Sul, Brazil

INTRODUCTION: Hospitals around the world have presented multiresistant Acinetobacter sp. outbreaks. The spread of these isolates that harbor an increasing variety of resistance genes makes the treatment of these infections and their control within the hospital environment more difficult. This study aimed to evaluate the occurrence and dissemination of Acinetobacter sp. multiresistant isolates and to identify acquired resistance genes. METHODS: We analyzed 274 clinical isolates of Acinetobacter sp. from five hospitals in Porto Alegre, RS, Brazil. We evaluated the susceptibility to antimicrobial, acquired resistance genes from Ambler's classes B and D, and performed molecular typing of the isolates using enterobacterial repetitive intergenic consensus-polymerase chain reaction (ERIC-PCR) technique. RESULTS: A high (68%) percentage of multiresistant isolates of Acinetobacter sp. was observed, and 69% were resistant to carbapenems. We identified 84% of isolates belonging to species A. baumannii because they presented the gene blaOXA-51. The gene blaOXA-23 was detected in 62% of the isolates, and among these, 98% were resistant to carbapenems. Using the ERIC-PCR technique, we identified clones of Acinetobacter sp. spread among the four hospitals analyzed during the sampling period. CONCLUSIONS: The data indicate the dissemination of Acinetobacter sp. isolates among hospitals and their permanence in the hospital after one year.

Epstein-Barr virus-positive gastric cancer: a distinct molecular subtype of the disease?

Abstract: Approximately 90% of the world population is infected by Epstein-Barr virus (EBV). Usually, it infects B lymphocytes, predisposing them to malignant transformation. Infection of epithelial cells occurs rarely, and it is estimated that about to 10% of gastric cancer patients harbor EBV in their malignant cells. Given that gastric cancer is the third leading cause of cancer-related mortality worldwide, with a global annual incidence of over 950,000 cases, EBV-positive gastric cancer is the largest group of EBV-associated malignancies. Based on gene expression profile studies, gastric cancer was recently categorized into four subtypes; EBV-positive, microsatellite unstable, genomically stable and chromosomal instability. Together with previous studies, this report provided a more detailed molecular characterization of gastric cancer, demonstrating that EBV-positive gastric cancer is a distinct molecular subtype of the disease, with unique genetic and epigenetic abnormalities, reflected in a specific phenotype. The recognition of characteristic molecular alterations in gastric cancer allows the identification of molecular pathways involved in cell proliferation and survival, with the potential to identify therapeutic targets. These findings highlight the enormous heterogeneity of gastric cancer, and the complex interplay between genetic and epigenetic alterations in the disease, and provide a roadmap to implementation of genome-guided personalized therapy in gastric cancer. The present review discusses the initial studies describing EBV-positive gastric cancer as a distinct clinical entity, presents recently described genetic and epigenetic alterations, and considers potential therapeutic insights derived from the recognition of this new molecular subtype of gastric adenocarcinoma.

Characterization of earth-based mortars for rammed earth repair

All over the world, many earth buildings are deteriorating due to lack of maintenance and repair. Repairs on rammed earth walls are mainly done with mortars, by rendering application; however, often the repair is inadequate, resorting to the use of incompatible materials, including cement-based mortars. It has been observed that such interventions, in walls that until that day only had presented natural ageing issues, created new problems, much more dangerous for the building than the previous ones, causing serious deficiencies in this type of construction. One of the problems is that the detachment of the new cement-based mortar rendering only occurs after some time but, until that occurrence, degradations develop in the wall itself. When the render detaches, instead of needing only a new render, the surface has to be repaired in depth, with a repair mortar. Consequently, it has been stablished that the renders, and particularly repair mortars, should have physical, mechanical and chemical properties similar to those of the rammed earth walls. This article intends to contribute to a better knowledge of earth-based mortars used to repair the surface of rammed earth walls. The studied mortars are based on four types of earth: three of them were collected from non-deteriorated parts of walls of unstabilized rammed earth buildings located in Alentejo region, south of Portugal; the fourth is a commercial earth, consisting mainly of clay. Other components were also used, particularly: sand to control shrinkage; binders stabilizers such as dry hydrated air-lime, natural hydraulic lime, Portland cement and natural cement; as well as natural vegetal fibers (hemp fibers). The experimental analysis of the mortars in the fresh state consisted in determining the consistency by flow table and the bulk density. In the hardened state, the tests made it possible to evaluate the following properties: linear and volumetric shrinkage; capillary water absorption; drying capacity; dynamic modulus of elasticity; flexural and compressive strength.

Release of insulin from PLGA-alginate dressing stimulates regenerative healing of burn wounds in rats

Burn wound healing involves a complex set of overlapping processes in an environment conducive to ischemia, inflammation, and infection costing $7.5 billion/year in the US alone, in addition to the morbidity and mortality that occur when the burns are extensive. We previously showed that insulin, when topically applied to skin excision wounds, accelerates re-epithelialization, and stimulates angiogenesis. More recently, we developed an alginate sponge dressing (ASD) containing insulin encapsulated in PLGA microparticles that provides a sustained release of bioactive insulin for >20days in a moist and protective environment. We hypothesized that insulin-containing ASD accelerates burn healing and stimulates a more regenerative, less scarring, healing. Using a heat-induced burn injury in rats, we show that burns treated with dressings containing 0.04mg insulin/cm2, every three days for 9 days, have faster closure, faster rate of disintegration of dead tissue, and decreased oxidative stress.In addition, in insulin-treated wounds the pattern of neutrophil inflammatory response suggests faster clearing of the burn dead tissue. We also observe faster resolution of the pro-inflammatory macrophages. We also found that insulin stimulates collagen deposition and maturation with the fibers organized more like a basket weave (normal skin) than aligned and crosslinked (scar tissue). In summary , application of ASD-containing insulin-loaded PLGA particles on burns every three days stimulates faster and more regenerative healing. These results suggest insulin as a potential therapeutic agent in burn healing and, because of its long history of safe use in humans, insulin could become one of the treatments of choice when repair and regeneration are critical for proper tissue function.

Influence of type of binder and sand on the characteristics of masonry mortars

This study deals with the characterization of masonry mortars produced with different binders and sands. Several properties of the mortars were determined, like consistence, compressive and flexural strengths, shrinkage and fracture energy. By varying the type of binder (Portland cement, hydrated lime and hydraulic lime) and the type of sand (natural or artificial), it was possible to draw some conclusions about the influence of the composition on mortars properties. The results showed that the use of Portland cement makes the achievement of high strength classes easier. This was due to the slower hardening of lime compared with cement. The results of fracture energy tests showed much higher values for artificial sand mortars when compared with natural sand ones. This is due to the higher roughness of artificial sand particles which provided better adhesion between sand and binder.

Comparative environmental life-cycle analysis of concretes using biomass and coal fly ashes as partial cement replacement material

Nowadays, the concrete production sector is challenged by attempts to minimize the usage of raw materials and energy consumption, as well as by environmental concerns. Therefore, it is necessary to choose better options, e.g. new technologies or materials with improved life-cycle performance. One solution for using resources in an efficient manner is to close the materials' loop through the recycling of materials that result either from the end-of-life of products or from being the by-product of an industrial process. It is well known that the production of Portland cement, one of the materials most used in the construction sector, has a significant contribution to the environmental impacts, mainly related with carbon dioxide emission. Therefore, the study and utilization of by-products or wastes usable as cement replacement in concrete can supply more sustainable options, provided that these type of concrete produced has same durability and equivalent quality properties as standard concrete. This work studied the environmental benefits of incorporating different percentages of two types of fly ashes that can be used in concrete as cement replacement. These ashes are waste products of power and heat production sectors using coal or biomass as fuels. The results showed that both ashes provide a benefit for the concrete production both in terms of environmental impact minimization and a better environmental performance through an increase in cement replacement. It is possible to verify that the incorporation of fly ashes is a sustainable option for cement substitution and a possible path to improve the environmental performance of the concrete industry.

Segurança contra incêndios na reabilitação sustentável de edifícios antigos

Dissertação de mestrado em Construção e Reabilitação Sustentáveis

Controlo da qualidade de betões

Dissertação de mestrado em Construção e Reabilitação Sustentáveis

Avaliação da durabilidade de concretos autoadensáveis com reduzido teor de cimento e elevados teores de adições minerais

A indústria de concreto é uma grande consumidora de recursos naturais, seja para a produção de agregados, ou para a produção de cimento Portland, onde grandes quantidades de calcário são extraídas. Além disso, a indústria do cimento tem uma grande contribuição na emissão de gases responsáveis pelo efeito estufa, portanto iniciativas que busquem reduzir o consumo de cimento nos concretos são importantes para a sustentabilidade das construções. Este trabalho avalia parâmetros de durabilidade de concretos autoadensáveis (CAA) com baixo consumo de cimento e elevados teores de cinza volante e metacaulim, com e sem a adição de cal, em comparação a dois concretos sem adições. Foram avaliados CAA com consumos de cimento entre 150 e 200 kg por m3 de concreto. Os ensaios realizados foram de resistividade, difusão de íons cloreto (LNEC E-463/2004), carbonatação acelerada e absorção por capilaridade. Os resultados demonstram a aptidão em produzir CAA com misturas terciárias e quaternárias com baixo consumo e que atendam as resistências correntes aos 28 dias (30 a 40 MPa), proporcionando ainda ganhos acentuados na durabilidade e elevadas resistências aos 90 dias.

A new Paxillus MacLeay, 1819 (Coleoptera: Passalidae: Passalinae) from the state of Amazonas, Brazil

Paxillus is a neotropical genus belonging to the subfamily Passalinae widespread from Mexico to Argentina. Brazil is known to harbor five species belonging to this genus with most of them presenting at head a flattened central tubercle lacking a free apex. However, one of these species, Paxillus macrocerus Reyes-Castillo & Fonseca, differs from that pattern by having a long central tubercle with a completely free apex. The present study describes and illustrates another new species, which has been found in the Brazilian Amazon, showing this same characteristic.