Relation between sequence and structure of HIV-1 protease inhibitor complexes: a model system for the analysis of protein flexibility.

The flexibility of different regions of HIV-1 protease was examined by using a database consisting of 73 X-ray structures that differ in terms of sequence, ligands or both. The root-mean-square differences of the backbone for the set of structures were shown to have the same variation with residue number as those obtained from molecular dynamics simulations, normal mode analyses and X-ray B-factors. This supports the idea that observed structural changes provide a measure of the inherent flexibility of the protein, although specific interactions between the protease and the ligand play a secondary role. The results suggest that the potential energy surface of the HIV-1 protease is characterized by many local minima with small energetic differences, some of which are sampled by the different X-ray structures of the HIV-1 protease complexes. Interdomain correlated motions were calculated from the structural fluctuations and the results were also in agreement with molecular dynamics simulations and normal mode analyses. Implications of the results for the drug-resistance engendered by mutations are discussed briefly.

Mielipidekyselyjärjestelmän suunnittelu ja toteutus

Tämän työn tavoitteena on suunnitella yksinkertainen Internet-pohjainen mielipidekyselyjärjestelmä sekä esitellä yksityiskohtaisesti järjestelmän toteutus ja siihen liittyvät menetelmät. Menetelmistäesitellään ainoastaan ennalta valitut menetelmät järjestelmän toteutukseen, tietojen esittämiseen, esitystavan muotoiluun sekä tietojen varastointiin. Järjestelmä toteutetaan HTML- ja PHP-kielillä sekä käyttämällä CSS-menetelmän tyylimuotoiluja ja XML-kielen muotoiluun perustuvia tiedostoja tietovarastoina. Järjestelmän suunnitteluun liittyen työssä pyritään kuvaamaan järjestelmään toteutettavat kaksi erillistä käyttöliittymää, pääkäyttäjän käyttöliittymä ja normaalin käyttäjän käyttöliittymä, sekä näihin toteutettavat toiminnot. Pääkäyttäjän tärkeimmät toiminnot ovat mielipidekyselyiden luominen, käyttäjien lisääminen kyselyihin sekä kyselyiden tulosten seuranta. Normaalin käyttäjän toiminnot taas rajoittuvat kirjautumiseen ja kyselyyn vastaamiseen. Järjestelmän toteutuksen kuvauksessa kuvataan tarkasti edellä mainittujen kahden käyttöliittymän toiminnot sekä näiden toimintojen toteutustavat. Lisäksi toteutuksen kuvauksen yhteydessä määritellään tarkasti järjestelmän tietovarastoina toimivien tiedostojen sisällön muoto. Työn lopputuloksena syntyi valituilla toteutustavoilla toteutettu toimiva mielipidekyselyjärjestelmä sekä tämä järjestelmän suunnitteluun ja toteutuksen selvittämiseen keskittynyt dokumentti. Toteutetusta järjestelmästä ei tullut täydellinen vaan jatkokehityksessä voidaan harkita esimerkiksi tietokannan käyttämistä järjestelmän tietovarastoina sekä joidenkin lisäominaisuuksien toteuttamista. Tavoitteeseen päästiin kuitenkin, sillä toteutettu järjestelmä on toimiva ja käyttötarkoitukseensa sopiva.

Phytochemical investigation of plants used in African traditional medicine: "Dioscorea sylvatica" (Dioscoreaceae), "Urginea altissima" (Liliaceae), "Jamesbrittenia fodina" and "Jamesbrittenia elegantissima" (Scrophulariaceae)

Les plantes médicinales représentent la seule source de médicaments pour près de 90 % de la population de certains pays d?Afrique. Le savoir-faire des guérisseurs traditionnels, d?une valeur inestimable, représente un point de départ pour l?investigation pharmacologique et phytochimique de ces médicaments naturels. Dans le cadre de ce travail, nous nous sommes dans un premier temps intéressés à valider l?utilisation en médecine traditionnelle de deux plantes, Diuscorea sylvatica (Dioscoreaceae) et Urginea altissima (Liliaceae), qui produisent, lorsqu?elles sont frottées sur la peau, une inflammation et des démangeaisons. Ces réactions cutanées ont pu être expliquées, au moins en partie, par la présence d?aiguilles acérées d?oxalate de calcium dans les organes souterrains. Ces microtraumatismes répétés de l?épiderme risquent de provoquer, lors d?une utilisation prolongée, des lésions granulomateuses. L?histamine n?a pas été détectée, mais d?autres substances pourraient être impliquées dans le processus inflammatoire. La seconde partie de ce travail a consisté en la détection, l?isolement et la caractérisation de nouveaux composés naturels présentant un intérêt thérapeutique potentiel. 70 extraits provenant de 28 plantes supérieures du Zimbabwe ont été soumis à un criblage chimique et biologique. Les extraits méthanoliques des parties aériennes de Jamesbrittenia fodina et J. elegantissima (Scrophulariaceae) ont été sélectionnés sur la base de leurs nombreuses activités. Le fractionnement guidé par l?activité de J. fudina a permis l?isolement des saponines A et B, responsables des activités antifongique, antibactérienne et molluscicide de l?extrait. De plus, les deux saponines ont montré une activité équivalente en tant qu?inhibiteurs de l?acétylcholinestérase, propriété encore non décrite pour cette classe de composés. Une analyse LC/uv/MS de l?extrait a permis d?attribuer l?activité antiradicalaire au verbascoside, un dérivé du phenylpropane; cette analyse a de plus montré la présence d?une série de dérivés de l?acide cinnamique, dont l?isolement a été entrepris. Deux problèmes d?instabilité sont apparus, empêchant l?isolement des composés par des méthodes chromatographiques de pointe, en dépit de très bonnes conditions de séparations. Des analyses LC/?H-NMR combinées à des analyses RMN classiques des mélanges ont permis d?attribuer ces instabilités d?une part à une isomérisation cis/trans induite par la lumière, et d?autre part à une transacylation du groupe cinnamoyl sur une unité de sucre. Ceci a permis l?identification de 12 esters cinnamiques d?iridoïdes, dont 8 nouveaux produits naturels. Ces dérivés présentent un intérêt thérapeutique, car des composés similaires ont montré des propriétés anti-inflammatoires significatives dans différents modèles in vivo. Deux flavanones ont aussi été isolées de l?extrait. Cette classe de composés n?a jamais été rapportée chez un membre des Scrophulariaceae. Une analyse LC/UV/MS comparative des extraits polaires des deux espèces, J. fodina et J. elegantissima, a été effectuée pour détecter la présence éventuelle de compos.és communs. Les saponines A et B et le verbascoside ont été identifiés dans l?extrait de J. elegantissima. Trois flavonoïdes ont de plus été isolés de ce dernier par CPC et HPLC semi-préparative.<br/><br/>In certain African countries, medicinal plants represent the unique source of to 90% of the population. The knowledge of traditional healers represents a basis for the pharmacological and phytochemical investigation of these natural medicines. This work first focused on the validation of use of two plants frequently employed in traditional medicine, Dioscorea sylvatica (Dioscoreaceae) and Urginea altissimu (Liliaceae), which produce mild inflammation and itching when rubbed on the skin. These cutaneous reactions were shown to be due, at least in part, to the presence of sharp needles of calcium oxalate, implying the risk of granulomatous lesions following a long term use. Histamine was not detected, but other compounds could be involved in the inflammatory process. The second part of this work consisted of the detection, isolation and characterisation of new natural compounds of potential therapeutic interest from African plants. Seventy extracts obtained from 28 higher plants of Zimbabwe were submitted to a chemical and biological screening. The methanol extracts of the whole plants of Jamesbrittenia fodina and J. elegantissima (Scrophulariaceae) were selected for their various activities. An activity-guided fractionation of J. fodina led to the isolation of the saponins A and B, responsible for the antifungal, antibacterial and molluscicidal properties. Both saponins were equally active as inhibitors of acetylcholinesterase, a property that has, to our knowledge, never been described for this class of compounds. A LC/UV/MS analysis of the extract allowed the identification of verbascoside as the product with radical scavenging activity, and indicated the presence of a series of potentially interesting cinnamic acid derivatives. Two types of instability problems occurred in the course of their isolation, as some compounds could not be separated despite very good chromatographic conditions. LC/'H-NMR analyses combined with in-mixture NMR analyses enabled the attribution of the cause of the instability in one case to a cidtrans light-induced isomerisation, and in the other case to a transacylation of the cinnamoyl moiety on a sugar residue. These problems of instability have not been the object of previous studies. 12 cinnamic iridoid esters could be characterised, 8 of these being new natural compounds. Several similar substances have displayed significant anti-inflammatory properties in different in vivo models, suggesting a therapeutic interest for these new derivatives. Two flavanones were isolated from the same extract. This class of compound has not been previously reported from species of the Scrophulariaceae family. A comparative LCAJVNS study of the polar extracts of the two species J. elegantissima and J. fodina was performed in order to detect possible common compounds. Saponins A and B and verbascoside were thus identified in .J. elegantissima. Moreover, three supplementary flavonoids were isolated from J. elegantissima..

Application des méthodes géophysiques à l'étude de deux sites (Kappelen et Grenchen) de l'aquifère poreux complexe du Seeland

L'aquifère du Seeland représente une richesse en ressources hydriques qu'il est impératif de préserver contre tout risque de détérioration. Cet aquifère prolifique est constitué principalement de sédiments alluviaux post-glaciaires (graviers, sables et limons). Il est soumis aux contraintes environnementales des pratiques d'agriculture intensive, du réseau routier, des villes et de leurs activités industrielles. La connaissance optimale de ces ressources est donc primordiale pour leur protection. Dans cette optique, deux sites Kappelen et Grenchen représentatifs de l'aquifère du Seeland ont été étudiés. L'objectif de ce travail est de caractériser d'un point de vue hydrogéophysique l'aquifère au niveau de ces deux sites, c'est-à-dire, comprendre la dynamique des écoulements souterrains par l'application des méthodes électriques de surface associées aux diagraphies en intégrant des méthodes hydrogéologiques. Pour le site de Kappelen, les méthodes électriques de surface ont permis d'identifier les différents faciès géoélectriques en présence et de mettre en évidence leur disposition en une structure tabulaire et horizontale. Il s'agit d'un aquifère libre constitué d'une série de graviers allant jusqu'à 15 m de profondeur reposant sur de la moraine argileuse. Les diagraphies électriques, nucléaires et du fluide ont servis à la détermination des caractéristiques pétrophysiques et hydrauliques de l'aquifère qui contrôlent son comportement hydrodynamique. Les graviers aquifères de Kappelen présentent deux minéraux dominants: quartz et calcite. Les analyses minéralogiques indiquent que ces deux éléments constituent 65 à 75% de la matrice. La porosité totale obtenue par les diagraphies nucléaires varie de 20 à 30 %, et de 22 à 29 % par diagraphies électrique. Avec les faibles valeurs de Gamma Ray ces résultats indiquent que l'aquifère des graviers de Kappelen est dépourvu d'argile minéralogique. La perméabilité obtenue par diagraphies du fluide varie de 3.10-4 à 5.10-2 m/s, et par essais de pompage de 10-4 à 10-2 m/s. Les résultats des analyses granulométriques indiquent une hétérogénéité granulométrique au niveau des graviers aquifères. La fraction de sables, sables très fins, silts et limons constitue de 10 à 40 %. Ces éléments jouent un rôle important dans le comportement hydraulique de l'aquifère. La porosité efficace de 11 à 25% estimée à partir des résultats des analyses granulométriques suppose que les zones les plus perméables correspondent aux zones les plus graveleuses du site. Etablie sur le site de Kappelen, cette méthodologie a été utilisée sur le site de Grenchen. Les méthodes électriques de surface indiquent que l'aquifère captif de Grenchen est constitué des sables silteux comprenant des passages sableux, encadrés par des silts argileux imperméables. L'aquifère de Grenchen est disposé dans une structure relativement tabulaire et horizontale. Son épaisseur totale peut atteindre les 25 m vers le sud et le sud ouest ou les passages sableux sont les plus importants. La détermination des caractéristiques pétrophysiques et hydrauliques s'est faite à l'aide des diagraphies. Les intensités Gamma Ray varient de 30 à 100 cps, les plus fortes valeurs n'indiquent qu'une présence d'éléments argileux mais pas de bancs d'argile. Les porosités totales de 15 à 25% et les densités globales de 2.25 à 2.45 g/cm3 indiquent que la phase minérale (matrice) est composée essentiellement de quartz et de calcaire. Les densités de matrice varient entre 2.65 et 2.75 g/cm3. La perméabilité varie de 2 10-6 à 5 10-4 m/s. La surestimation des porosités totales à partir des diagraphies électriques de 25 à 42% est due à la présence d'argiles. -- The vast alluvial Seeland aquifer system in northwestern Switzerland is subjected to environmental challenges due to intensive agriculture, roads, cities and industrial activities. Optimal knowledge of the hydrological resources of this aquifer system is therefore important for their protection. Two representative sites, Kappelen and Grenchen, of the Seeland aquifer were investigated using surface-based geoelectric methods and geophysical borehole logging methods. By integrating of hydrogeological and hydrogeophysical methods, a reliable characterization of the aquifer system at these two sites can be performed in order to better understand the governing flow and transport process. At the Kappelen site, surface-based geoelectric methods allowed to identify various geoelectric facies and highlighted their tabular and horizontal structure. It is an unconfined aquifer made up of 15 m thick gravels with an important sandy fraction and bounded by a shaly glacial aquitard. Electrical and nuclear logging measurements allow for constraining the petrophysical and hydrological parameters of saturated gravels. Results indicate that in agreement with mineralogical analyses, matrix of the probed formations is dominated by quartz and calcite with densities of 2.65 and 2.71 g/cc, respectively. These two minerals constitute approximately 65 to 75 % of the mineral matrix. Matrix density values vary from 2.60 to 2.75 g/cc. Total porosity values obtained from nuclear logs range from 20 to 30 % and are consistent with those obtained from electrical logs ranging from 22 to 29 %. Together with the inherently low natural gamma radiation and the matrix density values obtained from other nuclear logging measurements, this indicates that at Kappelen site the aquifer is essentially devoid of clay. Hydraulic conductivity values obtained by the Dilution Technique vary between 3.10-4 and 5.10-2 m/s, while pumping tests give values ranging from 10-4 to 10-2 m/s. Grain size analysis of gravel samples collected from boreholes cores reveal significant granulometric heterogeneity of these deposits. Calculations based on these granulometric data have shown that the sand-, silt- and shale-sized fractions constitute between 10 and 40 % of the sample mass. The presence of these fine elements in general and their spatial distribution in particular are important as they largely control the distribution of the total and effective porosity as well as the hydraulic conductivity. Effective porosity values ranging from 11 to 25% estimated from grain size analyses indicate that the zones of higher hydraulic conductivity values correspond to the zones dominated by gravels. The methodology established at the Kappelen site was then applied to the Grenchen site. Results from surface-based geoelectric measurements indicate that it is a confined aquifer made up predominantly of shaly sands with intercalated sand lenses confined impermeable shally clay. The Grenchen confined aquifer has a relatively tabular and horizontal structure with a maximum thickness of 25 m in the south and the southwest with important sand passages. Petrophysical and hydrological characteristics were performed using electrical and nuclear logging. Natural gamma radiation values ranging from 30 to 100 cps indicate presence of a clay fraction but not of pure clay layers. Total porosity values obtained from electrical logs vary form 25 to 42%, whereas those obtained from nuclear logs values vary from 15 to 25%. This over-estimation confirms presences of clays. Density values obtained from nuclear logs varying from 2.25 to 2.45 g/cc in conjunction with the total porosity values indicate that the dominating matrix minerals are quartz and calcite. Matrix density values vary between 2.65 and 2.75 g/cc. Hydraulic conductivity values obtained by the Dilution Technique vary from 2 10-6 to 5 10-4 m/s.

Residues of carbosulfan and its carbofuran metabolites and 3-hydroxy-carbofuran in oranges

The objectives of this study were to evaluate the residues of the insecticide carbosulfan and its carbofuran metabolites and 3-hydroxy-carbofuran in orange compartments (whole fruit, bagasse and juice) and comparison between the residual levels found in fruits with the maximum residue level and the safety interval established by the Brazilian legislation. Two field experiments were carried out, both with the following treatments: a-check; b-one application of 10 g of carbosulfan . 100 L-1 of water; c-one application with twice the rate applied in treatment b; d-four applications with the same rate applied in treatment b. Samples were taken at (-1), zero, 1, 3, 7, 14, 21 and 28 days after the last or unique application. The quantitative determinations were done by gas chromatography technique, using a nitrogen-phosphorus detector. The carbosulfan metabolism to its carbofuran metabolite was rapid (3 days), being both analytes concentrated in the bagasse (peel + flavedo + albedo). However, the metabolism of carbofuran to 3-hydroxy-carbofuran was of low intensity or this metabolite was quickly dissipated. Carbosulfan residues and its metabolites did not penetrate into the fruit, thus not contaminating the juice. The use of the pesticide was adequate, with respect to fruit consumption, in relation to the Brazilian legislation.

Ecology of Armillaria species on silver fir (Abies alba) in the Spanish Pyrenees

We describe the distribution and the ecology of three Armillaria species observed in silver fir (Abies alba) forests of the Pyrenees. We surveyed the presence and abundance of Armillaria above and belowground in 29 stands. Isolates were identified by the PCR-RFLP pattern of the IGS-1 region of their ribosomal DNA. We measured several ecological and management parameters of each stand in order to describe Armillaria infected sites. Armillaria cepistipes was the most abundant of three species observed. Armillaria gallica was dominant in soils with a higher pH and at lower elevations. Armillaria ostoyae seemed to be more frequent in stands where A. alba recently increased its dominance relative to other forest tree species. Thinning activities correlated with an increased abundance of Armillaria belowground. In 83% of the stands the same Armillaria species was observed above and belowground. It seems that in a conifer forest, A. cepistipes can be more frequent than A. ostoyae, a virulent conifer pathogen. Since logging is related to a higher abundance of Armillaria in the soil, the particular Armillaria species present in a given stand could be considered an additional site factor when making management decisions.

Identification and mutational analyses of phosphorylation sites of the calcineurin-binding protein CbpA and the identification of domains required for calcineurin binding in Aspergillus fumigatus.

Calcineurin is a key protein phosphatase required for hyphal growth and virulence in Aspergillus fumigatus, making it an attractive antifungal target. However, currently available calcineurin inhibitors, FK506 and cyclosporine A, are immunosuppressive, limiting usage in the treatment of patients with invasive aspergillosis. Therefore, the identification of endogenous inhibitors of calcineurin belonging to the calcipressin family is an important parallel strategy. We previously identified the gene cbpA as the A. fumigatus calcipressin member and showed its involvement in hyphal growth and calcium homeostasis. However, the mechanism of its activation/inhibition through phosphorylation and its interaction with calcineurin remains unknown. Here we show that A. fumigatus CbpA is phosphorylated at three distinct domains, including the conserved SP repeat motif (phosphorylated domain-I; PD-I), a filamentous fungal-specific domain (PD-II), and the C-terminal CIC motif (Calcipressin Inhibitor of Calcineurin; PD-III). While mutation of three phosphorylated residues (Ser208, Ser217, Ser223) in the PD-II did not affect CbpA function in vivo, mutation of the two phosphorylated serines (Ser156, Ser160) in the SP repeat motif caused reduced hyphal growth and sensitivity to oxidative stress. Mutational analysis in the key domains in calcineurin A (CnaA) and proteomic interaction studies confirmed the requirement of PxIxIT motif-binding residues (352-NIR-354) and the calcineurin B (CnaB)-binding helix residue (V371) for the binding of CbpA to CnaA. Additionally, while the calmodulin-binding residues (442-RVF-444) did not affect CbpA binding to CnaA, three mutations (T359P, H361L, and L365S) clustered between the CnaA catalytic and the CnaB-binding helix were also required for CbpA binding. This is the first study to analyze the phosphorylation status of calcipressin in filamentous fungi and identify the domains required for binding to calcineurin.

Hepatitis C virus variants resistant to macrocyclic NS3-4A inhibitors subvert IFN-β induction by efficient MAVS cleavage.

BACKGROUND & AIMS: The hepatitis C virus (HCV) NS3-4A protease is essential for the HCV life cycle and a prime target of antiviral treatment strategies. Protease inhibitors, however, are limited by emergence of resistance-associated amino acid variants (RAVs). The capacity to cleave and inactivate mitochondrial antiviral-signaling protein (MAVS) in the RIG-I-signaling pathway is a cardinal feature of NS3-4A, by which HCV blocks induction of interferon-(IFN)-β, thereby promoting viral persistence. Here, we aimed to investigate the impact of NS3-4A RAVs on MAVS cleavage. METHODS: The impact of NS3-4A RAVs on MAVS cleavage was assessed using immunoblot analyses, luciferase reporter assays and molecular dynamics simulations to study the underlying molecular principles. IFN-β was quantified in serum from patients with different NS3-4A RAVs. RESULTS: We show that macrocyclic NS3-4A RAVS with substitutions at residue D168 of the protease result in an increased capacity of NS3-4A to cleave MAVS and suppress IFN-β induction compared with a comprehensive panel of RAVs and wild type HCV. Mechanistically, we show the reconstitution of a tight network of electrostatic interactions between protease and the peptide substrate that allows much stronger binding of MAVS to D168 RAVs than to the wild-type protease. Accordingly, we could show IFN-β serum levels to be lower in patients with treatment failure due to the selection of D168 variants compared to R155 RAVs. CONCLUSIONS: Our data constitutes a proof of concept that the selection of RAVs against specific classes of direct antivirals can lead to the predominance of viral variants with possibly adverse pathogenic characteristics.

Grx5 glutaredoxin plays a central role in protection against protein oxidative damage in Saccharomyces cerevisiae

Glutaredoxins are members of a superfamily of thiol disulfide oxidoreductases involved in maintaining the redox state of target proteins. In Saccharomyces cerevisiae, two glutaredoxins (Grx1 and Grx2) containing a cysteine pair at the active site had been characterized as protecting yeast cells against oxidative damage. In this work, another subfamily of yeast glutaredoxins (Grx3, Grx4, and Grx5) that differs from the first in containing a single cysteine residue at the putative active site is described. This trait is also characteristic for a number of glutaredoxins from bacteria to humans, with which the Grx3/4/5 group has extensive homology over two regions. Mutants lacking Grx5 are partially deficient in growth in rich and minimal media and also highly sensitive to oxidative damage caused by menadione and hydrogen peroxide. A significant increase in total protein carbonyl content is constitutively observed in grx5cells, and a number of specific proteins, including transketolase, appear to be highly oxidized in this mutant. The synthetic lethality of the grx5 and grx2 mutations on one hand and ofgrx5 with the grx3 grx4 combination on the other points to a complex functional relationship among yeast glutaredoxins, with Grx5 playing a specially important role in protection against oxidative stress both during ordinary growth conditions and after externally induced damage. Grx5-deficient mutants are also sensitive to osmotic stress, which indicates a relationship between the two types of stress in yeast cells.

A peroxisomal glutathione transferase of Saccharomyces cerevisiae is functionally related to sulfur amino acid metabolism

Saccharomyces cerevisiae cells contain three omega-class glutathione transferases with glutaredoxin activity (Gto1, Gto2, and Gto3), in addition to two glutathione transferases (Gtt1 and Gtt2) not classifiable into standard classes. Gto1 is located at the peroxisomes, where it is targeted through a PTS1-type sequence, whereas Gto2 and Gto3 are in the cytosol. Among the GTO genes, GTO2 shows the strongest induction of expression by agents such as diamide, 1-chloro-2,4-dinitrobenzene, tert-butyl hydroperoxide or cadmium, in a manner that is dependent on transcriptional factors Yap1 and/or Msn2/4. Diamide and 1-chloro-2,4-dinitrobenzene (causing depletion of reduced glutathione) also induce expression of GTO1 over basal levels. Phenotypic analyses with single and multiple mutants in the S. cerevisiae glutathione transferase genes show that, in the absence of Gto1 and the two Gtt proteins, cells display increased sensitivity to cadmium. A gto1-null mutant also shows growth defects on oleic acid-based medium, which is indicative of abnormal peroxisomal functions, and altered expression of genes related to sulfur amino acid metabolism. As a consequence, growth of the gto1 mutant is delayed in growth medium without lysine, serine, or threonine, and the mutant cells have low levels of reduced glutathione. The role of Gto1 at the S. cerevisiae peroxisomes could be related to the redox regulation of the Str3 cystathionine -lyase protein. This protein is also located at the peroxisomes in S. cerevisiae, where it is involved in transulfuration of cysteine into homocysteine, and requires a conserved cysteine residue for its biological activity.

The AMPK family member Snf1 protects Saccharomyces cerevisiae cells upon glutatione oxidation

The AMPK/Snf1 kinase has a central role in carbon metabolism homeostasis in Saccharomyces cerevisiae. In this study, we show that Snf1 activity, which requires phosphorylation of the Thr210 residue, is needed for protection against selenite toxicity. Such protection involves the Elm1 kinase, which acts upstream of Snf1 to activate it. Basal Snf1 activity is sufficient for the defense against selenite, although Snf1 Thr210 phosphorylation levels become increased at advanced treatment times, probably by inhibition of the Snf1 dephosphorylation function of the Reg1 phosphatase. Contrary to glucose deprivation, Snf1 remains cytosolic during selenite treatment, and the protective function of the kinase does not require its known nuclear effectors. Upon selenite treatment, a null snf1 mutant displays higher levels of oxidized versus reduced glutathione compared to wild type cells, and its hypersensitivity to the agent is rescued by overexpression of the glutathione reductase gene GLR1. In the presence of agents such as diethyl maleate or diamide, which cause alterations in glutathione redox homeostasis by increasing the levels of oxidized glutathione, yeast cells also require Snf1 in an Elm1-dependent manner for growth. These observations demonstrate a role of Snf1 to protect yeast cells in situations where glutathione-dependent redox homeostasis is altered to a more oxidant intracellular environment and associates AMPK to responses against oxidative stress.

Signalling by neurotrophins and hepatocyte growth factor regulates axon morphogenesis by differential β-catenin phosphorylation

Tyrosine phosphorylation of ß-catenin, a component of adhesion complexes and the Wnt pathway, affects cell adhesion, migration and gene transcription. By reducing ßcatenin availability using shRNA-mediated gene silencing or expression of intracellular N-cadherin, we show that ß-catenin is required for axon growth downstream of Brain Derived Neurotrophic Factor (BDNF) and Hepatocyte Growth Factor (HGF) signalling. We demonstrate that receptor tyrosine kinases (RTK) Trk and Met interact with and phosphorylate ß-catenin. Neurotrophins (NT) stimulation of Trk receptors results in phosphorylation of ß-catenin at residue Y654 and increased axon growth and branching. Conversely, pharmacological inhibition of Trk or a Y654F mutant blocks these effects. ß-catenin phospho(P)-Y654 colocalizes with the cytoskeleton at growth cones. However, HGF that also increases axon growth and branching, induces ß-catenin phosphorylation at Y142 and a nuclear localization. Interestingly, dominant negative ΔN-TCF4 abolishes the effects of HGF in axon growth and branching, but not of NT. We conclude that NT and HGF signalling differentially phosphorylate ß-catenin, targeting ß-catenin to distinct compartments to regulate axon morphogenesis by TCF4-transcription-dependent and independent mechanisms. These results place ß-catenin downstream of growth factor/RTK signalling in axon differentiation.

Improvement of pyrolysis oil quality by scrubbing

Diplomityössä tutkittiin kuuman pyrolyysihöyryn puhdistamista haisevista ja kevyistä haihtuvista yhdisteistä. Työn kirjallisuusosassa selvitettiin pyrolyysiöljyn kannattavuutta uusiutuvana energialähteenä. Lisäksi eri pesurityyppejä tarkasteltiin ja ja vertailtiin. Työn kokeellisessa osassa käytettiin kahta erilaista koelaitteistoa. Tuotteen talteenotossa vertailtiin reaktorilämpötilan ja raaka-aineen kosteuden vaikutusta pyrolyysisaantoihin. Komponenttien talteenotossa tutkittiin epästabiilien ja pistävän hajuisten yhdisteiden poistamista kuumasta pyrolyysihöyrystä. Raaka-aineena käytettiin kuusen metsätäh-dehaketta, joka sisältää runsaasti neulasia ja kaarnaa. Kokeet toteutettiin lämpötila-alueella 460 - 520 °C. Koelaitteistot koostuivat kaasun (N2) syöttöjärjestelmään kytketystä kuumasta ja kyl-mästä puolesta. Tuotteen talteenotossa kuuma pyrolyysihöyry jäähdytettiin ja otettiin talteen. Komponenttien talteenotossa tuote kerättiin suodattimelle ja metyleeniklo-ridiloukkuun. Tuotteiden koostumukset analysoitiin kaasukromatokrafilla. Korkeimmat orgaaniset saannot saatiin 480 °C reaktorilämpötilalla ja 8-9 p-% raaka-ainekosteudella. Pyrolyysiveden määrä putosi raaka-aineen kosteutta nostettaessa. Eri reaktorilämpötiloilla ja raaka-ainekosteuksilla ei ollut vaikutusta hiiltosaantoihin. Kaasusaannot (pääosin CO2, CO ja hiilivedyt) olivat noin 10 p-%. Komponenttien talteenotossa suodatin tukkeutui matalissa (< 250 °C) lämpötiloissa. Suodattimelle jäänyt materiaali oli pääosin neulasista ja kaarnasta peräisin olevia uuteaineita (pääosin hartsi- rasvahappoja) ja sokereita. Korkeimmissa lämpötiloissa (> 250 °C) uuteaineet läpäisivät suodattimen paremmin. 250 ja 300 °C:n lämpötiloissa suuri määrä lyhytketjuisia helposti haihtuvia epästabiileja ja haisevia yhdisteitä (ketoneja, furaani- ja furfuraalijohdannaisia jne.) jäi metyleenikloridi- ja metanoliloukkuihin.

Puupellettien soveltuvuus energiantuotantoon

Puupelletit ovat mekaanisen puunjalostusteollisuuden sivutuotteista valmistettua puupuristetta, jota käytetään pääasiallisesti lämmityspolttoaineena. Suomessa puupellettien käyttö on ollut toistaiseksi vähäistä. Pellettien käyttö on Euroopassa suurinta Ruotsissa, jossa pellettiliiketoiminta on viime vuosina kasvanut voimakkaasti. Puupellettituotantolaitoksia on maahamme perustettu viime aikoina useita ja lisäksi hankkeita on vireillä. Työ on muodoltaan soveltuvuustutkimus, Feasibility Study. Työssä selvitetään puupellettien tuotannon ja käytön tekniikkaa sekä taloutta. Työssä kartoitetaan myös puupellettiliiketoiminnan laajenemisen mahdollisia esteitä ja selvitetään mahdollisuuksia puupellettiliiketoiminnan kasvulle Suomessa.

Biocide analysis, usability and stability

Biosidien toimittajat tavallisesti suorittavat biosidien annostelumäärien hallinnan paperi- ja kartonkiteollisuudessa. Useimmiten annostelun hallinta määritetään epäsuorilla menetelmillä, kuten esimerkiksi määrittämällä bakteerien kasvua. Biosidien tehoaineiden todellista konsentraatiota tai määrää prosessivesissä tai lopputuotteessa ei tavallisesti mitata. Diplomityössä kehitettiin kolmelle paperiteollisuudessa yleisesti käytetyllä biosidin tehoaineelle analyyttiset menetelmät. Menetelmät kehitettiin glutaraldehydille, 2,2-dibromi-3-nitriilipropionamidi:lle (DBNPA) ja 5-kloori-2-metyyli-4-isotiatsoliini-3-oni:lle (CMI). Kehitettyjä menetelmiä käytettiin tehoaineiden stabiilisuuden seuraamiseen vesiliuoksessa eri pH:ssa ja lämpötilassa. Lisäksi kartonkinäytteistä tehtiin uuttokokeita ja yritettiin kehittää uuttomenetelmät, joilla pystyttäisiin määrittämään biosidien tehoaineiden jäännöspitoisuuksia lopputuotteesta. Glutaraldehydille ja CMI:lle onnistuttiin kehittämään uuttomenetelmät, joilla pystyttiin määrittämään kartongista tutkittujen tehoaineiden jäännöspitoisuudet. Saadut tulokset vaikuttavat realistisilta. Glutaraldehydille ja DBNPA:lle tehtiin stabiilisuuskokeita ja tulokset ovat samankaltaisia mitä muut tutkijat ovat saaneet.