Techniques to improve the shear strength of impacted bone graft: The effect of particle size and washing of the graft

Background: When fresh morselized graft is compacted, as in impaction bone-grafting for revision hip surgery, fat and marrow fluid is either exuded or trapped in the voids between particles. We hypothesized that the presence of incompressible fluid damps and resists compressive forces during impaction and prevents the graft particles from moving into a closer formation, thus reducing the graft strength. In addition, viscous fluid such as fat may act as an interparticle lubricant, thus reducing the interlocking of the particles. Methods: We performed mechanical shear testing in the laboratory with use of fresh-frozen human femoral-head allografts that had been passed through different orthopaedic bone mills to produce graft of differing particle-size distributions (grading). Results: After compaction of fresh graft, fat and marrow fluid continued to escape on application of normal loads. Washed graft, however, had little lubricating fluid and better contact between the particles, increasing the shear resistance. On mechanical testing, washed graft was significantly (p < 0.001) more resistant to shearing forces than fresh graft was. This feature was consistent for different bone mills that produced graft of different particle-size distributions and shear strengths. Conclusions: Removal of fat and marrow fluid from milled human allograft by washing the graft allows the production of stronger compacted graft that is more resistant to shear, which is the usual mode of failure. Further research into the optimum grading of particle sizes from bone mills is required. Clinical Relevance: Understanding the mechanical properties of milled human allograft is important when impaction grafting is used for mechanical support. A simple means of improving the mechanical strength of graft produced by currently available bone mills, including an intraoperative washing technique, is described.

A decline in fish catches and the size of Oreochromis niloticus in Lake Wamala (Uganda) following human exploitation

The fishery of Lake Wamala has declined since the lake was stocked in 1956 and opened to fishing during the 1960s. Surveys were conducted on the lake during 1975/78 and 1988/92 to investigate the causes of declining fish catches. The lake produced an average of 4000 - 6000 tonnes of fish annually from 1960s through 1970s. Total fish catches decreased from a maximum of 7100 tonnes in 1967 to less than 500 tonnes by 1990s. Catch rates decreased from about 8 kg in the 1960s to less than 1 kg per net per night by 1975. During the 1970s the catch was dominated by Oreochromis niloticus (67%) followed by Clarias gariepinus (17%), and Protopterus aethiopicus (15.1 %). By 1990s the proportion of O. niloticus had decreased to 45.1% while that of P. aethiopicus had increased to 37.6%. These changes seem to have been caused by overfishing resulting from increased fishing effort from the recommended 250 to about 1000 boats and the additional increase in effort through driving fish into the nets by beating water. The maximum size of O. niloticus in the fishery decreased from 32 cm total length in 1975/78 to 22 cm in 1988/92 while the size at first maturity decreased from about 21 cm to 14 cm during the period. This has been concurrent with a shift in the mesh size of gillnet used from 127 mm (5") in 1960s to 64 mm by 1990s. Environmental changes, especially in lake level in 1980, may also have affected the fishery.

Group Size and Composition of Black．and．White Snub．nosedMonkey(rhinopithecus)Estimated by Faecesof Sleeping Sites at Baima Snow Mountain

介绍了应用过夜地粪便来估计白马雪山黑白仰鼻猴群大小和组成的一种方法。该物种以单雄多雌单 元和全雄组的形式在树上过夜。粪粒根据其大小可分为3种类型：成年雄性的(最大)、成年雌性的(中等大小)和 未成年个体的(最小)。2000一2001年，搜集了滇西北白马雪山国家级自然保护区北部南任村(99。04 7E，28。34 7N) 附近黑白仰鼻猴群每个季节2个过夜地的粪粒。根据2001年11月猴群通过开阔地的数据来确定猴群组成。每个 季节，由于单雄多雌单元的成年个体数与其粪粒数正相关，所以二者回归直线的斜率可以看作是每个个体每晚 的平均排便量。由于该物种的栖息地主要为高山峡谷，而且能见度较低，因此，利用过夜地粪便比以前通过猴群 活动痕迹来估计猴群大小和组成相对准确、可靠。从估计成年雌性个体数的角度看，利用粪粒来估计种群大约有 9．4％的偏差。导致偏差的可能原因有杂草和灌丛对粪粒准确计数的影响、个体排粪率的差异以及成年雄性最小 粪粒与成年雌性最大粪粒的混淆等。该方法适应于栖息地和主要食物与本文研究种群相似的其他种群。

CRANIODENTAL VARIATION OF MACAQUES ( Macaca ): SIZE,FUNCTION AND PHYLOGENY

为了研究猕猴属的颅骨差异性, 从而探 讨种间在形态、功能和系统分化方面的相互联系, 测定了11 个猕猴种类的77 个颅骨变量, 用于主成 分分析和判别分析。应用巢式分析方法, 分析过程 包括3 个步骤。所有变量根据功能和部位的不同首 先分为7 个单位: 下颌、下颌齿、上颌齿、上面 颅、下面颅、面颅后部和颅腔。第2 步根据它们所 揭示的相似性(具有相同的种间及种内差异性类 型) 合并为3 个解剖区域: 咀嚼器官(下颌、下颌 齿、上颌齿) , 面颅(上面颅和下面颅) 和整个面 颅后(面颅后和颅腔) 。第3 步从3 个解剖区域筛 选出27 个变量代表整个颅骨的形态结构。除了寻 找不同的功能单位, 解剖区域及总的颅骨具有不同 的种间和种内差异类型外, 此过程对筛出研究意义 不大的变量起很重要的作用。上述分析过程分别用 于对雌、雄性和两性的研究。所研究的11 个猕猴 种类间形成了3 聚类。第1 类包括食蟹猴(Macaca f ascicularis) 、戴帽猴( M1 sinica) 和头巾猴( M1 radiata) ; 第2 类包括猕猴( M1 mulatta ) 、熊猴 (M1 assensis ) 、平顶猴( M1 nemestrina ) 和黑猿 (M1 nigra) ; 第3 类包括蛮猴( M1 sylvanus ) 、日 本猴( M1 f uscata) 、短尾猴( M1 arctoides ) 和藏 酋猴(M1 thibetana) 。分别从两性差异、食物、生态、分类和系统分化方面进行了差异性讨论, 结果 认为猕猴种间颅骨的差异性主要是由于系统分化不 同而引起个体差异所致, 即种间和种内存在的个体 差异。在主成分分析中, 这些差异在不同的区域表 现在不同的成分上。在咀嚼器官上种间的差异在第 1 主成分上, 种内的差异则在第2 主成分上。面颅 的情况则刚好相反。这两种差异在面颅后及颅腔上 则被第1 和第2 主成分所平分。这样, 种间的差异 在咀嚼器官上大于种内的差异。种内的差异在面颅 上则大于种间的差异。这两种差异在面颅后和颅腔 上则几乎大小相等。这一研究结果表明, 与传统的 概念不同, 第2 主成分不仅仅表现形态、形状的差 异, 而如同第1 主成分一样, 也表现形态的大小成 分。此研究所揭示的猕猴种间关系部分与Foden (1976 , 1980) 和Delson (1980) 相同。如平顶猴 与黑猿、短尾猴、藏酋猴和熊猴的关系。食蟹猴、 头巾猴和戴帽猴的关系则不同, 并已得到有关分子 生物学的支持, 此3 种可能来自同一祖先并经历相 同的扩散过程。此研究所设计的巢式分析过程提供 了一种很好的差异性研究手段。最终结果暗示在形 态学研究中仅仅考虑某一区域的形态结构是很不够 的, 因为不同的部分具有不同的种间及种内差异类 型。这在化石研究中尤其要注意。

Size effects in indentation of hydrated biological tissues

Fluid flow in biological tissues is important in both mechanical and biological contexts. Given the hierarchical nature of tissues, there are varying length scales at which time-dependent mechanical behavior due to fluid flow may be exhibited. Here, spherical nanoindentation and microindentation testings are used for the characterization of length scale effects in the mechanical response of hydrated tissues. Although elastic properties were consistent across length scales, there was a substantial difference between the time-dependent mechanical responses for large and small contact radii in the same tissue specimens. This difference was far more obvious when poroelastic analysis was used instead of viscoelastic analysis. Overall, indentation testing is a fast and robust technique for characterizing the hierarchical structure of biological materials from nanometer to micrometer length scales and is capable of making quantitative material property measurements to do with fluid flow. © 2011 Materials Research Society.

Compressive failure of finite size unidirectional composite laminates with a region of fibre waviness

The compressive behaviour of finite unidirectional composites with a region of misaligned reinforcement is investigated via finite element analyses. Models with and without fibre bending stiffness are compared, confirming that compressive strength is accurately predicted without modelling fibre bending stiffness for real composite components which typically have waviness defects of several millimetres wavelength. Various defect parameters are investigated. Results confirm the well-known sensitivity of compressive strength to misalignment angle, and also show that compressive strength falls rapidly with the proportion of laminate width covered by the wavy region. A simple empirical equation is proposed to model the effect of a single patch of waviness in finite specimens. Other parameters such as length and position of the wavy region are found to have a smaller effect on compressive strength. The modelling approach is finally adapted to model distributed waviness and thus determine the compressive strength of composites with realistic waviness defects. © 2011 Elsevier Ltd. All rights reserved.

Discrete dislocation plasticity analysis of size effects in single crystals

The effect of size and slip system configuration on the tensile stress-strain response of micron-sized planar crystals as obtained from discrete dislocation plasticity simulations is presented. The crystals are oriented for either single or symmetric double slip. With the rotation of the tensile axis unconstrained, there is a strong size dependence, with the flow strength increasing with decreasing specimen size. Below a certain specimen size, the flow strength of the crystals is set by the nucleation strength of the initially present Frank-Read sources. The main features of the size dependence are the same for both the single and symmetric double slip configurations.

Analysis of asphalt concrete permeability data using representative pore size

The permeability of asphalt concrete has been the subject of much study by pavement engineers over the last decade. The work undertaken has tended to focus on high air voids as the primary indicator of permeable asphalt concrete. This paper presents a simple approach for understanding the parameters that affect permeability. Principles explained by Taylor in 1956 in channel theory work for soils are used to derive a new parameter-representative pore size. Representative pore size is related to the air voids in the compacted mix and the D75 of the asphalt mix grading curve. Collected Superpave permeability data from published literature and data collected by the writers at the Queensland Department of Transport and Main Roads is shown to be better correlated with representative pore size than air voids, reducing the scatter considerably. Using the database of collected field and laboratory permeability values an equation is proposed that pavement engineers can use to estimate the permeability of in-place pavements. © 2011 ASCE.

Size effects in the conical indentation of an elasto-plastic solid

The size effect in conical indentation of an elasto-plastic solid is predicted via the Fleck and Willis formulation of strain gradient plasticity (Fleck, N.A. and Willis, J.R., 2009, A mathematical basis for strain gradient plasticity theory. Part II: tensorial plastic multiplier, J. Mech. Phys. Solids, 57, 1045-1057). The rate-dependent formulation is implemented numerically and the full-field indentation problem is analyzed via finite element calculations, for both ideally plastic behavior and dissipative hardening. The isotropic strain-gradient theory involves three material length scales, and the relative significance of these length scales upon the degree of size effect is assessed. Indentation maps are generated to summarize the sensitivity of indentation hardness to indent size, indenter geometry and material properties (such as yield strain and strain hardening index). The finite element model is also used to evaluate the pertinence of the Johnson cavity expansion model and of the Nix-Gao model, which have been extensively used to predict size effects in indentation hardness. © 2012 Elsevier Ltd.