Approaches to documents of the Quebrada de Humahuaca, a path of exploration file of the Prelature of Humahuaca.

The work of cataloging and digitizing the Historical Ar-chive of the Prelature of Humahuaca, presents us with documen-tary mass, almost unused for historical research. Due to organiza-tional reasons, this documentary heritage was limited to consulta-tion of researchers. The development of “Documenta” project will allow us to know the contents of that file, get closer to these do-cuments for consultation and scientific production.

Co-exposure to mycotoxins: the case of waste management workers

Introduction - Occupational exposures are characterized by being complex and associated to co-exposure to several contaminants by different exposure routes. Even if exposure occurs to only a chemical agent, it can have different exposure routes and can result in different health effects. The waste management setting is recognized by the presence of several chemical and biologic agents in the workplaces. Recently, it was reported occupational exposure to Aflatoxin B1 (AFB1) in one Portuguese waste management industry. However, data regarding to fungal burden showed that exposure to other mycotoxins should be expected. Aim of the study - The aim of the present work was to know if workers from this waste management industry were exposed to other mycotoxins besides AFB1.

Corrosion protection of PVD and paint coatings for selective solar absorber surfaces

The selective solar absorber surface is a fundamental part of a solar thermal collector, as it is responsible for the solar radiation absorption and for reduction of radiation heat losses. The surface’s optical properties, the solar absorption (á) and the emittance (å), have great impact on the solar thermal collector efficiency. In this work, two coatings types were studied: coatings obtained by physical vapor deposition (PVDs) and coatings obtained by projection with different paints (PCs) on aluminum substrates. The most common industrial high performing solar selective absorbers are nowadays produced by vacuum deposition methods, showing some disadvantages, such as lower durability, lower resistance to corrosion, adhesion and scratch, higher cost and complex production techniques. Currently, spectrally selective paints are a potential alternative for absorbing surfaces in low temperature applications, with attractive features such as ease of processing, durability and commercial availability with low cost. Solar absorber surfaces were submitted to accelerated ageing tests, specified in ISO 22975-3. This standard is applicable to the evaluation of the long term behavior and service life of selective solar absorbers for solar collectors working under typical domestic hot water system conditions. The studied coatings have, in the case of PVDs solar absorptions between 0.93 and 0.96 and emittance between 0.07 and 0.10, and in the case of PCs, solar absorptions between 0.91 and 0.93 and emittance between 0.40 and 0.60. In addition to evaluating long term behavior based on artificial ageing tests, it is also important to know the degradation mechanism of different coatings that are currently in the market. Electrochemical impedance spectroscopy (EIS) allows for the assessment of mechanistic information concerning the degradation processes, providing quantitative data as output, which can easily relate to the kinetic parameters of the system. EIS measures were carried out on Gamry FAS2 Femostat coupled with a PCL4 Controller. Two electrolytes were used, 0.5 M NaCl and 0.5 M Na2SO4, and the surfaces were tested at different immersion times up to 4 weeks. The following types of specimens have been tested: Aluminium with/without surface treatment, 3 selective paint coatings (one with a poly(urethane) binder and two with silicone binders) and 2 PVD coatings. Based on the behaviour of the specimens throughout the 4 weeks of immersion, it is possible to conclude that the coating showing the best protective properties corresponds to the selective paint coating with a polyurethane resin followed by the other paint coatings, whereas both the PVD coatings do not confer any protection to the substrate, having a deleterious effect as compared to the untreated aluminium reference.

Design of experiments to optimized the determination of TDIs in agglomerated cork stoppers

Isocyanates are included into a class with an extreme commercial importance because their use in the manufacture of polyurethanes. Polyurethanes are used in several applications such as adhesives, coatings, foams, thermoplastics resins, printing inks, foundry moulds and rubbers. Agglomerated cork stoppers are currently used for still wines, semi-sparkle and gaseous wines, beer and cider. Methylene diphenyl diisocyanate (MDI) is presently the isocyanate used in the production of polyurethane based adhesive in use due to its lowest toxicity comparing with toluene diisocyanate (TDI) previously employed. However, free monomeric TDI or MDI, depending on the based polyurethane, can migrate from agglomerated cork stoppers to beverages therefore it needs to be under control. The presence of these compounds are usually investigated by HPLC with Fluorescence or UV-Vis detector depending on the derivatising agent. Ultra Performance Liquid Chromatography with Diode Array Detector (UPLC-DAD) method is replacing HPLC. The objective of this study is to determine which method is better to analyze isocyanates from agglomerated cork stoppers, essentially TDI to quantify its monomer. A Design of Experiments (DOE) with three factors, column temperature, flow and solvent, at two levels was done. Eight experiments with three replications and two repetitions were developed. Through an ANOVA the significance of the factors was evaluated and the best level’s factors were selected. As the TDI has two isomers and in this method these two isomers were not always separated an ANOVA with results of resolution between peaks was performed. The Design of Experiments reveals to be a suitable statistical tool to determine the best conditions to quantified free isocyanates from agglomerated cork stoppers to real foodstuff. The best level’s factors to maximize area was column temperature at 30ºC, flow to 0,3 mL/min and solvent 0,1% Ammonium Acetate, to maximize resolution was the same except the solvent that was 0,01% Ammonium Acetate.

Compulsory licensing of standard-essential patents and injunctive relief as abuse of dominant position in violation of Article 102 TFEU

When a dominant undertaking holding a standard-essential patent uses its exclusive right to the IP to seek injunctions against those wishing to produce either de jure or de facto standard compliant products, it creates a conflict between the exclusive right to the use of the IP on the one hand and the possible abuse of dominance due to the exclusionary conduct on the other. The aim of the thesis is to focus on the issues concerning abuse of dominance in violation of Article 102 TFEU when the holder of the standard-essential patent seeks an injunction against a would-be licensee. The thesis is mainly based on the most recent ECJ case law in Huawei and the Commission’s recent decisions in Samsung and Motorola. The case law in Europe prior to those decisions was mainly focused on the German case law from Orange Book Standard which provided IP holders great leverage due to the almost automatic granting of injunctions against infringers. The ECJ in Huawei set out the requirements for when a de jure standard-essential patent holder would not be violating Article 102 TFEU when seeking an injunction, requiring that negotiations in good faith must take place prior to the seeking of the injunction and that all offers must comply with FRAND terms, thus limiting the scope of case law derived from Orange Book Standard in Germany. The ECJ chose not to follow all of the reasoning the Commission had laid out in Samsung and Motorola which provided a more licensee-friendly approach on the matter, but rather chose a compromise between the IP holder friendly German case law and the Commission’s decisions. However, the ECJ did not disclose how FRAND terms themselves should be interpreted, but rather left it for the national courts to decide. Furthermore, the thesis strongly argues that Huawei did not change the fact that only vertically integrated IP holders who have made a FRAND declaration are subject to the terms laid out in Huawei, thus leaving non-practicing entities such as patent trolls and entities that have not made a FRAND declaration outside its scope. The resulting conclusion from the thesis is that while the ECJ in Huawei presented new exceptional circumstances for when an IP holder could be abusing its dominant position when it seeks an injunction, it still left many more questions answered, such as the meaning of FRAND and whether deception in giving a FRAND declaration is prohibited under Article 102 TFEU or not.

In vitro studies of drug transformations: application to forensic toxicology

The forensic toxicologist faces challenges in the detection of drugs and poisons in biological samples due to transformations which occur both during life and after death. For example, changes can result from drug metabolism during life or from the use of formalin solution for post mortem embalming purposes. The former requires the identification of drug metabolites and the latter the identification of chemical reaction products in order to know which substances had been administered. The work described in this thesis was aimed at providing ways of tackling these challenges and was divided into two parts. Part 1 investigated the use of in vitro drug metabolism by human liver microsomes (HLM) to obtain information on drug metabolites and Part 2 investigated the chemical reactions of drugs and a carbamate pesticide with formalin solution and formalin-blood. The initial aim of part I was to develop an in vitro metabolism method using HLM, based on a literature review of previous studies of this type. MDMA was chosen as a model compound to develop the HLM method because its metabolism was known and standards of its metabolites were commercially available. In addition, a sensitive and selective method was developed for the identification and quantitation of hydrophilic phase I drug metabolites using LC/MS/MS with a conventional reverse-phase (C18) column. In order to obtain suitable retention factors for polar drug metabolites on this column, acetyl derivatives were evaluated for converting the metabolites to more lipophilic compounds and an optimal separation system was developed. Acetate derivatives were found to be stable in the HPLC mobile phase and to provide good chromatographic separation of the target analytes. In vitro metabolism of MDMA and, subsequently, of other drugs involved incubation of 4 µg drug substance in pH 7.4 buffer with an NADPH generating system (NGS) at 37oC for 90 min with addition of more NGS after 30 min. The reaction was stopped at 90 min by the addition of acetonitrile before extraction of the metabolites. Acetate derivatives of MDMA metabolites were identified by LC/MS/MS using multiple reaction monitoring (MRM). Three phase I metabolites (both major and minor metabolites) of MDMA were detected in HLM samples. 3,4-dihydroxy-methamphetamine and 4-hydroxy-3-methoxymethamphetamine were found to be major metabolites of MDMA whereas 3,4-methylenedioxyamphetamine was found to be a minor metabolite. Subsequently, ten MDMA positive urines were analysed to compare the metabolite patterns with those produced by HLM. An LC/MS method for MDMA and its metabolites in urine samples was developed and validated. The method demonstrated good linearity, accuracy and precision and insignificant matrix effects, with limits of quantitation of 0.025 µg/ml. Moreover, derivatives of MDMA and its metabolites were quantified in all 10 positive human urine samples. The urine metabolite pattern was found to be similar to that from HLM. The second aim of Part 1 was to use the HLM system to study the metabolism of some new psychoactive substances, whose misuse worldwide has necessitated the development of analytical methods for these drugs in biological specimens. Methylone and butylone were selected as representative cathinones and para-methoxyamphetamine (PMA) was chosen as a representative ring-substituted amphetamine, because of the involvement of these drugs in recent drug-related deaths, because of a relative lack of information on their metabolism, and because reference standards of their metabolites were not commercially available. An LC/MS/MS method for the analysis of methylone, butylone, PMA and their metabolites was developed. Three phase I metabolites of methylone and butylone were detected in HLM samples. Ketone reduction to β-OH metabolites and demethylenation to dihydroxy-metabolites were found to be major phase I metabolic pathways of butylone and methylone whereas N-demethylation to nor-methylone and nor-butylone were found to be minor pathways. Also, demethylation to para-hydroxyamphetamine was found to be a major phase I metabolic pathway of PMA whereas β-hydroxylation to β-OH-PMA was found to be a minor pathway. Formaldehyde is used for embalming, to reduce decomposition and preserve cadavers, especially in tropical countries such as Thailand. Drugs present in the body can be exposed to formaldehyde resulting in decreasing concentrations of the original compounds and production of new substances. The aim of part II of the study was to evaluate the in vitro reactions of formaldehyde with selected drug groups including amphetamines (amphetamine, methamphetamine and MDMA), benzodiazepines (alprazolam and diazepam), opiates (morphine, hydromorphone, codeine and hydrocodone) and with a carbamate insecticide (carbosulfan). The study would identify degradation products to serve as markers for the parent compounds when these were no longer detectable. Drugs standards were spiked in 10% formalin solution and 10% formalin blood. Water and whole blood without formalin were used for controls. Samples were analysed by LC/MS/MS at different times from the start, over periods of up to 30 days. Amphetamine, methamphetamine and MDMA were found to rapidly convert to methamphetamine, DMA and MDDMA respectively, in both formalin solution and formalin blood, confirming the Eschweiler-Clarke reaction between amine-containing compounds and formaldehyde. Alprazolam was found to be unstable whereas diazepam was found to be stable in both formalin solution and water. Both were found to hydrolyse in formalin solution and to give open-ring alprazolam and open-ring diazepam. Other alprazolam conversion products attached to paraformaldehyde were detected in both formalin solution and formalin blood. Morphine and codeine were found to be more stable than hydromorphone and hydrocodone in formalin solution. Conversion products of hydromorphone and hydrocodone attached to paraformaldehyde were tentatively identified in formalin solution. Moreover, hydrocodone and hydromorphone rapidly decreased within 24 h in formalin blood and could not be detected after 7 days. Carbosulfan was found to be unstable in formalin solution and was rapidly hydrolysed within 24 h, whereas in water it was stable up to 48 h. Carbofuran was the major degradation product, plus smaller amounts of other products, 3-ketocarbofuran and 3-hydrocarbofuran. By contrast, carbosulfan slowly hydrolysed in formalin-blood and was still detected after 15 days. It was concluded that HLM provide a useful tool for human drug metabolism studies when ethical considerations preclude their controlled administration to humans. The use of chemical derivatisation for hydrophilic compounds such as polar drug metabolites for analysis by LC/MS/MS with a conventional C18 column is effective and inexpensive, and suitable for routine use in the identification and quantitation of drugs and their metabolites. The detection of parent drugs and their metabolites or conversion and decomposition products is potentially very useful for the interpretation of cases in forensic toxicology, especially when the original compounds cannot be observed.

Aniseikonia tests: The role of viewing mode, response bias, and size-color illusions.

PURPOSE To identify the factors responsible for the poor validity of the most common aniseikonia tests, which involve size comparisons of red-green stimuli presented haploscopically. METHODS Aniseikonia was induced by afocal size lenses placed before one eye. Observers compared the sizes of semicircles presented haploscopically via color filters. The main factor under study was viewing mode (free viewing versus short presentations under central fixation). To eliminate response bias, a three-response format allowed observers to respond if the left, the right, or neither semicircle appeared larger than the other. To control decisional (criterion) bias, measurements were taken with the lens-magnified stimulus placed on the left and on the right. To control for size-color illusions, measurements were made with color filters in both arrangements before the eyes and under binocular vision (without color filters). RESULTS Free viewing resulted in a systematic underestimation of lens-induced aniseikonia that was absent with short presentations. Significant size-color illusions and decisional biases were found that would be mistaken for aniseikonia unless appropriate action is taken. CONCLUSIONS To improve their validity, aniseikonia tests should use short presentations and include control conditions to prevent contamination from decisional/response biases. If anaglyphs are used, presence of size-color illusions must be checked for. TRANSLATIONAL RELEVANCE We identified optimal conditions for administration of aniseikonia tests and appropriate action for differential diagnosis of aniseikonia in the presence of response biases or size-color illusions. Our study has clinical implications for aniseikonia management.

Foreign direct investment motives and location decision factors under economic recession: Three cases of Finnish FDI in Portugal

The purpose of this thesis was to study how uncertainty in economic conditions of the FDI host country affects location decision of an investment, and what kinds of motives are behind the investment decision to a country in economic recession, in this case Portugal. The country has attracted foreign direct investment steadily, but it is evident that most multinational firms and investors tend to be more interested in emerging economies in general. The aim was to find out also which host country specific advantages are important in this kind of cross-border investment and which factors are important for an FDI to succeed under economic uncertainty at the host country. The study was done by analyzing three Finnish case companies: a private equity and real estate investment firm Pontos Group, A wave energy technology research and development company AW Energy and NSN, Nokia Solutions and Networks, a global telecommunications company. The research was done empirically, by interviewing experts on the subject, mainly persons representing these companies. In addition relevant articles, journals and content from case companies’ web-pages is used for the desk research regarding the topic. The results of this thesis showed that the FDIs with strategic asset-seeking investments seem most profitable FDI types under uncertain economic conditions. This kind of investments aim to strengthen the company’s long-term strategy, including the time after recession. Firm-specific ownership advantages that bring competitive advantage proved out to be important under these circumstances, as well as first-mover advantages and externally created assets such as government promotional policies regarding FDI incentives. Also the location was considered suitable for resource- or efficiency seeking motives, based on the lowered price level at the host country. Problems were related mainly to financing, but as foreign companies receive financing usually from their home countries, the economic recession of the host country does not have significant effect for FDI decision, according to this study

Nitrogen vs argon: what is the most effective atmosphere for shelf-life extension of buckler sorrel leaves?

Buckler sorrel (Rumex induratus Boiss. & Reut.) is an underutilized leafy vegetable with peculiar sensory properties and potential as a gourmet food. In the food industry, different packaging methods have been used for shelf-life extension, but it is important to know how the quality of minimally processed vegetable is affected by these treatments. Recently, nitrogen and argon have been used for food packaging. Nitrogen is low soluble in water and other food constituents and does not support the growth of aerobic microbes. In turn, argon is biochemically active and appears to interfere with enzymatic oxygen receptor sites. In this study, modified atmospheres enriched with nitrogen and argon were evaluated for shelf-life extension of buckler sorrel leaves. Wild samples were gathered in Bragança, Portugal, considering local consumers’ sites and criteria. Healthy and undamaged leaves were selected, rinsed in tap water, and a portion was immediately analyzed (non-stored control). The remaining fresh material was packaged in polyethylene bags under nitrogen- and argon-enriched atmospheres and a conventional control atmosphere (air). All packaged samples were stored at 4 ºC for 12 days and then analyzed. The headspace gas composition was monitored during storage. Different quality attributes were evaluated, including visual (colour), nutritional (macronutrients, individual sugars and fatty acids) and bioactive (hydrophilic and lipophilic molecules and antioxidant properties) parameters. Different statistical tools were used; the one-way analysis of variance (ANO VA) was applied for analyse the differences among treatments and a linear discriminant analysis (LDA ) was used to evaluate the effects on the overall postharvest quality. The argon-enriched atmosphere better prevent the samples yellowing. The proximate composition did not change significantly during storage. Samples in control atmosphere revealed higher protein and ash contents and lower levels of lipids. The non-stored control samples presented the higher amounts of fructose, glucose and trehalose. The storage time increased the palmitic acid levels and decreased the content in α-linolenic and linoleic acids. The γ- e δ-tocopherols were higher after the 12 days of cold storage. Probably, the synthesis of these lipophilic compounds was a plant strategy to fight against the abiotic stress induced by storage. Higher levels of total phenolics and flavonoids and increased reducing power and β-carotene bleaching inhibition capacity were also found in the stored control samples. Once again, this result may be attributed to the intrinsic plant-protection mechanisms. Overall, the argon atmosphere was more suitable for quality preservation and shelf-life extension of buckler sorrel.

Polio eradication efforts in regions of geopolitical strife: the Boko Haram threat to efforts in sub-Saharan Africa.

The World Health Organization aims to eradicate wild poliovirus worldwide by the end of 2018. Cameroon and Nigeria, neighboring countries, have been affected by the terrorist and militant activities of the Islamist sect Boko Haram. Impacted regions are mainly the far North of Cameroon and Northern Nigeria. Targets of Boko Haram aggression in these zones include violence against polio workers, disruption of polio immunization campaigns, with consequent reduced access to health care and immunization. In addition to this significant problem, Northern Nigeria has historically seen rejection of polio virus vaccine initiatives. It remains to know how health systems can continue operations against polio in areas where Boko Haram operates. If appropriate measures are not urgently taken, it will be not possible to meet the 2018 goal of polio virus eradication. The response should include specialized immunization activities in conflict zones, will engagement of leaders. Countries should also explore immunization activities by soldiers and military personnel.

Proposal for linking the school library of the School Education Unit Four Queens in the nursery of J. Francisco Public Library Orlich Tibás Canton, Heredia, Costa Rica

Since classical antiquity, the public library has been the institution that helps people to know their history and face the changes that society increasingly demands. Similarly, school libraries are piloting the learning of children; in them, manage to have their first contact with books, his first great travel stories with dinosaurs, robots, fiction, among others through the stories, legends and knowledge games. School libraries contribute to strengthening reading habits from the earliest years of life.In conducting the research, developed an assessment of the current situation of the two libraries under study, based on the following variables: services, human resources, budget, infrastructure, children's collection, furniture, electronic equipment and audiovisual, recreational interests, needs of information, socio-cultural characteristics and availability. This was achieved through the collection of information externada by children of preschool and junior, mothers or guardians and teachers of the Education Unit of Four Queens and in charge of the School Library Education Unit Four Queens (BEUPCR) and J. Francisco Public Library Orlich (BPFJO).According to the diagnosis and analysis of information, it is shown that the aspects related to personnel, electronic equipment and resources are limited, in addition, there were deficiencies in infrastructure BEUPCR.

Proposed network of mobile libraries: alternative information to rural communities in Costa Rica

This study examines the services provided by the bookmobile of SINABI-Public Libraries in rural communities visited Costa Rica during 2009 and 2010 according to the sample selected for the presentation of a proposed Mobile Library Network to Costa Rica.Each country has very heterogeneous populations and the populations in unfavorable geographical areas (rural or urban fringe areas) and areas without library service or cultural institution, they have specific information needs. By its terms can not exercise the right to information, while urban areas have greater influence and social advantage to have easy access to various information resources.The mobile library services are presented as an ideal tool to deliver library services to any population, mainly those remote communities and vulnerable state as rural areas. Bookmobile is defined as any means of transport (buses, trains, boats, motorcycles, boats, animals, etc.), which shifts documentary material.

Parental feelings face to hospitalization of the child

The hospitalizatíon of a child carnes with it major changes, etther in the child's life or parent. lllness and hospttalizatíon constitute a crisis situation for both the child and the famHy as it incorporates financiai, psychotogical, relational and social changes. The purpose of this work and analyze the satísfactíon and parents' perception on the importance of nursing care during hospttalizatíon and feelings experienced by parents. Objectives: To know the opinions and feelings of the parents in relation to the admlsston of the child 1n the service of Pediatrics at North of Portugal. Methods: Integrated this study parents of chtldren hospttalized in the pediatric inpatíent at the Hospital Trás-os-Montes e alto Douro, Vila Real, whose children were in the service to at least more than 48 hours, In total 33 escorts that replied to the questionnaire. For such a study we chose the type quantitative deschptíve. We proceeded to collect data by conductíng a questíonnaire, and the results of it were drafted in the SPSS program through Quantitatíve model wtth exploratory qualitatíve approach. Results: The age ofthe partícipants is between the 21 and 46 years - old, 75. 8% of respondents were married, 78. 8% of chtldren was hospitalized in the first time. We conclude that the mother is who else accompanies the chtld in the hospital. We had positive feedback regarding the interactíon parent-nurses since many parents stressed the good relatíonship with the nursing team (It reported that "Nurses" and "Nurses and "auxiliaries" were who else helped them, with 30. 3% and 21. 2% respectively). The feelings more mentioned were: anxiety -21 answers, sadness-20, fear-15 and hope with 15. The conditions offered to the parents were considered goodfor60.6%.

What can the philosophy of science contribute to the ethics of science and technology?

Nascida para permitir que seus criadores possam atender suas próprias necessidades, a técnica científica sempre desempenhou papel significativo na civilização humana. Este é o contexto em que podemos vislumbrar o advento da tecnociência moderna, que tem contribuído significativamente para o incremento do controle humano sobre a natureza. Este estudo tem por objetivo analisar, sob o enfoque da bioética, reflexões sobre como a filosofia da ciência entende a neutralidade da ciência e sua convergência com a racionalidade epistêmica, bem como relacionar essas reflexões ao processo de tomada de decisões na administração da tecnociência. O estudo levantou dúvidas sobre a capacidade do conhecimento tecnocientífico para legitimar e justificar as decisões no âmbito dos sistemas de ciência e tecnologia nacionais, sinalizando assim a necessidade de promover ligação entre a auto-regulação tecnocientífico e hetero-regulação bioética. ______________________________________________________________________________ ABSTRACT

Exergy analysis of a solar photovoltaic module

PV energy is the direct conversion of solar radiation into electricity. In this paper, an analysis of the influence of parameters such as global irradiance or temperature in the performance of a PV installation has been carried out. A PV module was installed in a building at the University of Málaga, and these parameters were experimentally determined for different days and different conditions of irradiance and temperature. Moreover, IV curves were obtained under these conditions to know the open-circuit voltage and the short-circuit current of the module. With this information, and using the first law of thermodynamics, an energy analysis was performed to determine the energy efficiency of the installation. Similarly, using the second law of thermodynamics, an exergy analysis is used to obtain the exergy efficiency. The results show that the energy efficiency varies between 10% and 12% and the exergy efficiency between 14% and 17%. It was concluded that the exergy analysis is more suitable for studying the performance, and that only electric exergy must be considered as useful exergy. This exergy efficiency can be improved if heat is removed from the PV module surface, and an optimal temperature is reached.