Design Patterns in EPOC Software Development

Työssä tutkittiin oliosuunnittelumalleja EPOC-käyttöjärjestelmässä. Työssä tutkittiin sekä yleisiä suunnittelumalleja että EPOC-ympäristössä esiintyviä oliorakenteita, niiden aiheuttamia vaatimuksia sovelluksille sekä niiden käyttämisestä saatavia hyötyjä. Työssä toteutettiin EPOC-ohjelmiston suunnittelu hyödyntäen suunnittelumalleja ja periaatteita. Oliosuunnittelumallit ovat yleistyneet huomattavasti viime vuosina. Suunnittelumallien lähtökohtana ovat sekä yleiset että ympäristökohtaiset suunnitteluperiaatteet ja säännöt. Suunnittelumallit ovat osa isompaa rakennekokonaisuutta, joka käsittää sekä prosessi-, analyysi-, arkkitehtuuri- ym. malleja. Oliosuunnittelumallit nopeuttavat ja helpottavat suunnittelua sekä parantavat uudelleenkäytettävyyttä korkeammalla abstraktiotasolla. EPOC on tulevaisuuden mobiililaitteiden yleisimpiä käyttöjärjestelmiä. EPOC on kokonaisuudessaan oliopohjainen ja sisältää lukuisia oliorakenteita, joiden ymmärtäminen on sovelluskehityksen kannalta elintärkeää. Koska ympäristöt, joissa EPOC-käyttöjärjestelmää käytetään, ovat yleensä resurssien puolesta rajoittuneita, on yleisten suunnittelumallien käytössä oltava tarkkana. EPOC vaatii yleisiin suunnittelumalleihin muutoksia ja estää joidenkin käytön kokonaan.

Operational Knowledge in Process Design

Työn tarkoituksena on selvittää, miten käyttötietämystä hyödynnetään prosessisuunnittelussa. Tavoitteena on löytää keinoja parantaa käyttötietämyksen hallintaa suunnitteluprosessin aikana ja selvittää, vaikuttaako tämä prosessisuunnittelun laatuun.Prosessisuunnittelun laatua arvioidaan seitsemällä kriteerillä, jotka ovat investointikustannukset, käyttökustannukset, turvallisuus, ympäristövaikutukset, käytettävyys, innovatiivisuus ja aikataulu. Suunnitteluprosessi jaetaan kolmeen vaiheeseen: esisuunnitteluun, perussuunnitteluun ja detaljisuunnitteluun. Prosessisuunnittelua, investointiprojektia, prosessisuunnittelun laatukriteerejä, suunnitteluprosessin eri vaiheita ja käyttötietämyksen luokittelua tarkastellaan yleisesti. Työssä selvitettiin käyttötietämyksen hyödyntämistä Kemiralla. Aluksi muotoiltiin yleisiä väittämiä käyttötietämyksen hyödyntämisestä Kemiran ulkopuolisten eri alojen asiantuntijoiden haastattelujen perusteella. Tämän jälkeen Kemiran prosessisuunnittelijat arvioivat väittämiä. Arvioiden perusteella tehtiin johtopäätöksiä yleisesti käyttötietämyksen hyödyntämisestä prosessisuunnittelussa. Seuraavaksi haastateltiin kahdessa erityyppisessä case-projektissa mukana olleita henkilöitä ja muotoiltiin yleiset väittämät näihin projekteihin sopiviksi. Projekteissa mukana olleet henkilöt arvioivat väittämiä, ja näiden arvioiden perusteella projekteja vertailtiin keskenään. Lopussa esitetään johtopäätökset kaikkien väittämien arvioiden perusteella. Johtopäätöksenä voidaan todeta, että käyttötietämystä voidaan hyödyntää kaikissa suunnittelun vaiheissa, mutta paras hyöty saadaan perus- ja detaljisuunnittelussa. Käyttötietämyksellä voidaan vaikuttaa joihinkin prosessisuunnittelun laatukriteereihin, kuten esimerkiksi käytettävyyteen ja turvallisuuteen enemmän kuin muihin. Kemiralle suositellaan nykyisten tiedonhallintamenetelmien kehittämistä, jotta käyttötietämyksen saatavuus ja sen siirtäminen paranisi. Pr

Tales of the City. Storytelling as a contemporary tool of urban planning and design

Almost thirty years ago, as the social sciences underwent their 'discursive turn', Bernardo Secchi (1984) drew, in what he called the 'urban planning narrative', the attention of planners to the production of myths, turning an activity often seen as primarily technical into one centred around the production of images and ideas. This conception of planning practice gave rise to a powerful current of research in English-speaking countries. Efforts were made to both combine the urban planning narrative with storytelling and to establish storytelling as a prescriptive or descriptive model for planning practice. Thus, just as storytelling is supposed to have led democratic communication off track through a pronounced concern for a good story, storytelling applied to the field of urban production may have led to an increasing preoccupation with staging and showmanship for projects to the detriment of their real inclusion in political debate. It is this possible transformation of the territorial action that will be the focus of the articles collected in this special issue of Articulo - Journal of urban research.

Effectiveness of a primary care-based intervention to reduce sitting time in overweight and obese patients (SEDESTACTIV): a randomized controlled trial; rationale and study design

Background: There is growing evidence suggesting that prolonged sitting has negative effects on people's weight, chronic diseases and mortality. Interventions to reduce sedentary time can be an effective strategy to increase daily energy expenditure. The purpose of this study is to evaluate the effectiveness of a six-month primary care intervention to reduce daily of sitting time in overweight and mild obese sedentary patients. Method/Design: The study is a randomized controlled trial (RCT). Professionals from thirteen primary health care centers (PHC) will randomly invite to participate mild obese or overweight patients of both gender, aged between 25 and 65 years old, who spend 6 hours at least daily sitting. A total of 232 subjects will be randomly allocated to an intervention (IG) and control group (CG) (116 individuals each group). In addition, 50 subjects with fibromyalgia will be included. Primary outcome is: (1) sitting time using the activPAL device and the Marshall questionnaire. The following parameters will be also assessed: (2) sitting time in work place (Occupational Sitting and Physical Activity Questionnaire), (3) health-related quality of life (EQ-5D), (4) evolution of stage of change (Prochaska and DiClemente's Stages of Change Model), (5) physical inactivity (catalan version of Brief Physical Activity Assessment Tool), (6) number of steps walked (pedometer and activPAL), (7) control based on analysis (triglycerides, total cholesterol, HDL, LDL, glycemia and, glycated haemoglobin in diabetic patients) and (8) blood pressure and anthropometric variables. All parameters will be assessed pre and post intervention and there will be a follow up three, six and twelve months after the intervention. A descriptive analysis of all variables and a multivariate analysis to assess differences among groups will be undertaken. Multivariate analysis will be carried out to assess time changes of dependent variables. All the analysis will be done under the intention to treat principle. Discussion: If the SEDESTACTIV intervention shows its effectiveness in reducing sitting time, health professionals would have a low-cost intervention tool for sedentary overweight and obese patients management.

The Optimisation of the Draft Tube of a Hydro Power Plant at Off-Design Conditions

Several possible methods of increasing the efficiency and power of hydro power plants by improving the flow passages are investigated in this stydy. The theoretical background of diffuser design and its application to the optimisation of hydraulic turbine draft tubes is presented in the first part of this study. Several draft tube modernisation projects that have been carried out recently are discussed. Also, a method of increasing the efficiency of the draft tube by injecting a high velocity jet into the boundary layer is presented. Methods of increasing the head of a hydro power plant by using an ejector or a jet pump are discussed in the second part of this work. The theoretical principles of various ejector and jet pump types are presented and four different methods of calculating them are examined in more detail. A self-made computer code is used to calculate the gain in the head for two example power plants. Suitable ejector installations for the example plants are also discussed. The efficiency of the ejector power was found to be in the range 6 - 15 % for conventional head increasers, and 30 % for the jet pump at its optimum operating point. In practice, it is impossible to install an optimised jet pump with a 30 % efficiency into the draft tube as this would considerabely reduce the efficiency of the draft tube at normal operating conditions. This demonstrates, however, the potential for improvement which lies in conventional head increaser technology. This study is based on previous publications and on published test results. No actual laboratory measurements were made for this study. Certain aspects of modelling the flow in the draft tube using computational fluid dynamics are discussed in the final part of this work. The draft tube inlet velocity field is a vital boundary condition for such a calculation. Several previously measured velocity fields that have successfully been utilised in such flow calculations are presented herein.

Problems of the architecture design in the system integration

This thesis studies the problems and their reasons a software architect faces in his work. The purpose of the study is to search and identify potential factors causing problens in system integration and software engineering. Under a special interest are non-technical factors causing different kinds of problems. Thesis was executed by interviewing professionals that took part in e-commerce project in some corporation. Interviewed professionals consisted of architects from technical implementation projects, corporation's architect team leader, different kind of project managers and CRM manager. A specific theme list was used as an guidance of the interviews. Recorded interviews were transcribed and then classified using ATLAS.ti software. Basics of e-commerce, software engineering and system integration is described too. Differences between e-commerce and e-business as well as traditional business are represented as are basic types of e-commerce. Software's life span, general problems of software engineering and software design are covered concerning software engineering. In addition, general problems of the system integration and the special requirements set by e-commerce are described in the thesis. In the ending there is a part where the problems founded in study are described and some areas of software engineering where some development could be done so that same kind of problems could be avoided in the future.

Impact of Study Design on Reported Incidences of Acute Mountain Sickness: A Systematic Review.

AIMS: Published incidences of acute mountain sickness (AMS) vary widely. Reasons for this variation, and predictive factors of AMS, are not well understood. We aimed to identify predictive factors that are associated with the occurrence of AMS, and to test the hypothesis that study design is an independent predictive factor of AMS incidence. We did a systematic search (Medline, bibliographies) for relevant articles in English or French, up to April 28, 2013. Studies of any design reporting on AMS incidence in humans without prophylaxis were selected. Data on incidence and potential predictive factors were extracted by two reviewers and crosschecked by four reviewers. Associations between predictive factors and AMS incidence were sought through bivariate and multivariate analyses for different study designs separately. Association between AMS incidence and study design was assessed using multiple linear regression. RESULTS: We extracted data from 53,603 subjects from 34 randomized controlled trials, 44 cohort studies, and 33 cross-sectional studies. In randomized trials, the median of AMS incidences without prophylaxis was 60% (range, 16%-100%); mode of ascent and population were significantly associated with AMS incidence. In cohort studies, the median of AMS incidences was 51% (0%-100%); geographical location was significantly associated with AMS incidence. In cross-sectional studies, the median of AMS incidences was 32% (0%-68%); mode of ascent and maximum altitude were significantly associated with AMS incidence. In a multivariate analysis, study design (p=0.012), mode of ascent (p=0.003), maximum altitude (p<0.001), population (p=0.002), and geographical location (p<0.001) were significantly associated with AMS incidence. Age, sex, speed of ascent, duration of exposure, or history of AMS were inconsistently reported and therefore not further analyzed. CONCLUSIONS: Reported incidences and identifiable predictive factors of AMS depend on study design.

High-Speed Solid-Rotor Induction Machine – Electromagnetic Calculation and Design

Within the latest decade high-speed motor technology has been increasingly commonly applied within the range of medium and large power. More particularly, applications like such involved with gas movement and compression seem to be the most important area in which high-speed machines are used. In manufacturing the induction motor rotor core of one single piece of steel it is possible to achieve an extremely rigid rotor construction for the high-speed motor. In a mechanical sense, the solid rotor may be the best possible rotor construction. Unfortunately, the electromagnetic properties of a solid rotor are poorer than the properties of the traditional laminated rotor of an induction motor. This thesis analyses methods for improving the electromagnetic properties of a solid-rotor induction machine. The slip of the solid rotor is reduced notably if the solid rotor is axially slitted. The slitting patterns of the solid rotor are examined. It is shown how the slitting parameters affect the produced torque. Methods for decreasing the harmonic eddy currents on the surface of the rotor are also examined. The motivation for this is to improve the efficiency of the motor to reach the efficiency standard of a laminated rotor induction motor. To carry out these research tasks the finite element analysis is used. An analytical calculation of solid rotors based on the multi-layer transfer-matrix method is developed especially for the calculation of axially slitted solid rotors equipped with wellconducting end rings. The calculation results are verified by using the finite element analysis and laboratory measurements. The prototype motors of 250 – 300 kW and 140 Hz were tested to verify the results. Utilization factor data are given for several other prototypes the largest of which delivers 1000 kW at 12000 min-1.

Soft tissue artifact distribution on lower limbs during treadmill gait: Influence of skin markers' location on cluster design.

Segment poses and joint kinematics estimated from skin markers are highly affected by soft tissue artifact (STA) and its rigid motion component (STARM). While four marker-clusters could decrease the STA non-rigid motion during gait activity, other data, such as marker location or STARM patterns, would be crucial to compensate for STA in clinical gait analysis. The present study proposed 1) to devise a comprehensive average map illustrating the spatial distribution of STA for the lower limb during treadmill gait and 2) to analyze STARM from four marker-clusters assigned to areas extracted from spatial distribution. All experiments were realized using a stereophotogrammetric system to track the skin markers and a bi-plane fluoroscopic system to track the knee prosthesis. Computation of the spatial distribution of STA was realized on 19 subjects using 80 markers apposed on the lower limb. Three different areas were extracted from the distribution map of the thigh. The marker displacement reached a maximum of 24.9mm and 15.3mm in the proximal areas of thigh and shank, respectively. STARM was larger on thigh than the shank with RMS error in cluster orientations between 1.2° and 8.1°. The translation RMS errors were also large (3.0mm to 16.2mm). No marker-cluster correctly compensated for STARM. However, the coefficient of multiple correlations exhibited excellent scores between skin and bone kinematics, as well as for STARM between subjects. These correlations highlight dependencies between STARM and the kinematic components. This study provides new insights for modeling STARM for gait activity.

Toward a rational design of combination therapy in cancer.

By merging computational systems modeling and experimental approaches, we have uncovered treatments reprogramming pro-angiogenic monocytes present in breast tumor into immunologically potent cells capable of mediating an anti-tumor immune response. The unraveled pathways and ligands which underlie monocyte pro-angiogenic activity have a strong predictive value for breast cancer patient relapse - free survival.

Effect of humeral stem design on humeral position and range of motion in reverse shoulder arthroplasty.

PURPOSE: The impacts of humeral offset and stem design after reverse shoulder arthroplasty (RSA) have not been well-studied, particularly with regard to newer stems which have a lower humeral inclination. The purpose of this study was to analyze the effect of different humeral stem designs on range of motion and humeral position following RSA. METHODS: Using a three-dimensional computer model of RSA, a traditional inlay Grammont stem was compared to a short curved onlay stem with different inclinations (155°, 145°, 135°) and offset (lateralised vs medialised). Humeral offset, the acromiohumeral distance (AHD), and range of motion were evaluated for each configuration. RESULTS: Altering stem design led to a nearly 7-mm change in humeral offset and 4 mm in the AHD. Different inclinations of the onlay stems had little influence on humeral offset and larger influence on decreasing the AHD. There was a 10° decrease in abduction and a 5° increase in adduction between an inlay Grammont design and an onlay design with the same inclination. Compared to the 155° model, the 135° model improved adduction by 28°, extension by 24° and external rotation of the elbow at the side by 15°, but led to a decrease in abduction of 9°. When the tray was placed medially, on the 145° model, a 9° loss of abduction was observed. CONCLUSIONS: With varus inclination prostheses (135° and 145°), elevation remains unchanged, abduction slightly decreases, but a dramatic improvement in adduction, extension and external rotation with the elbow at the side are observed.