A primer for use of genetic tools in selecting and testing the suitability of set-aside sites protected from deep-sea seafloor massive sulfide mining activities

Seafloor massive sulfide (SMS) mining will likely occur at hydrothermal systems in the near future. Alongside their mineral wealth, SMS deposits also have considerable biological value. Active SMS deposits host endemic hydrothermal vent communities, whilst inactive deposits support communities of deep water corals and other suspension feeders. Mining activities are expected to remove all large organisms and suitable habitat in the immediate area, making vent endemic organisms particularly at risk from habitat loss and localised extinction. As part of environmental management strategies designed to mitigate the effects of mining, areas of seabed need to be protected to preserve biodiversity that is lost at the mine site and to preserve communities that support connectivity among populations of vent animals in the surrounding region. These "set-aside" areas need to be biologically similar to the mine site and be suitably connected, mostly by transport of larvae, to neighbouring sites to ensure exchange of genetic material among remaining populations. Establishing suitable set-asides can be a formidable task for environmental managers, however the application of genetic approaches can aid set-aside identification, suitability assessment and monitoring. There are many genetic tools available, including analysis of mitochondrial DNA (mtDNA) sequences (e.g. COI or other suitable mtDNA genes) and appropriate nuclear DNA markers (e.g. microsatellites, single nucleotide polymorphisms), environmental DNA (eDNA) techniques and microbial metagenomics. When used in concert with traditional biological survey techniques, these tools can help to identify species, assess the genetic connectivity among populations and assess the diversity of communities. How these techniques can be applied to set-aside decision making is discussed and recommendations are made for the genetic characteristics of set-aside sites. A checklist for environmental regulators forms a guide to aid decision making on the suitability of set-aside design and assessment using genetic tools. This non-technical primer document represents the views of participants in the VentBase 2014 workshop.

Systematically retrieving research in the digital age: Case study on the topic of social networking sites and young people’s mental health

Online information seeking has become normative practice among both academics and the general population. This study appraised the performance of eight databases to retrieve research pertaining to the influence of social networking sites on the mental health of young people. A total of 43 empirical studies on young people’s use of social networking sites and the mental health implications were retrieved. Scopus and SSCI had the highest sensitivity with PsycINFO having the highest precision. Effective searching requires large
generic databases, supplemented by subject-specific catalogues. The methodology developed here may provide inexperienced searchers, such as undergraduate students, with a framework to define a realistic scale of searching to undertake for a particular literature review or similar project.

Accidental release of hazardous gases: modelling and assessing risk

The renewed concern in assessing risks and consequences from technological hazards in industrial and urban areas continues emphasizing the development of local-scale consequence analysis (CA) modelling tools able to predict shortterm pollution episodes and exposure effects on humans and the environment in case of accident with hazardous gases (hazmat). In this context, the main objective of this thesis is the development and validation of the EFfects of Released Hazardous gAses (EFRHA) model. This modelling tool is designed to simulate the outflow and atmospheric dispersion of heavy and passive hazmat gases in complex and build-up areas, and to estimate the exposure consequences of short-term pollution episodes in accordance to regulatory/safety threshold limits. Five main modules comprising up-to-date methods constitute the model: meteorological, terrain, source term, dispersion, and effects modules. Different initial physical states accident scenarios can be examined. Considered the main core of the developed tool, the dispersion module comprises a shallow layer modelling approach capable to account the main influence of obstacles during the hazmat gas dispersion phenomena. Model validation includes qualitative and quantitative analyses of main outputs by the comparison of modelled results against measurements and/or modelled databases. The preliminary analysis of meteorological and source term modules against modelled outputs from extensively validated models shows the consistent description of ambient conditions and the variation of the hazmat gas release. Dispersion is compared against measurements observations in obstructed and unobstructed areas for different release and dispersion scenarios. From the performance validation exercise, acceptable agreement was obtained, showing the reasonable numerical representation of measured features. In general, quality metrics are within or close to the acceptance limits recommended for ‘non-CFD models’, demonstrating its capability to reasonably predict hazmat gases accidental release and atmospheric dispersion in industrial and urban areas. EFRHA model was also applied to a particular case study, the Estarreja Chemical Complex (ECC), for a set of accidental release scenarios within a CA scope. The results show the magnitude of potential effects on the surrounding populated area and influence of the type of accident and the environment on the main outputs. Overall the present thesis shows that EFRHA model can be used as a straightforward tool to support CA studies in the scope of training and planning, but also, to support decision and emergency response in case of hazmat gases accidental release in industrial and built-up areas.

Genotoxicity in humans and indicator species exposed to uranium wastes

Os riscos dos resíduos provenientes da extração do urânio estão associados ao seu conteúdo em metais e radionuclídeos, o que levanta preocupações às autoridades governamentais e à população em geral. As populações humanas e outras espécies animais que vivem em zonas de exploração de urânio poderão estar expostas à radiação através de resíduos e poeiras radioactivase também através de água e alimentos contaminados. A determinação dos riscos deste tipo de contaminantes é feita, principalmente, através da análise química de amostras ambientais, dando-se menos importância à determinação de efeitos biológicos. A determinação de efeitos biológicos causados pela exposição a poluentes, tem-se revelado muito importante para uma avaliação da qualidade ambiental, de modo a providenciar indicações acerca dos efeitos negativos nos seres vivos e também para complementar a informação dada pelas análises químicas de amostras ambientais. Este facto levou ao estabelecimento de biomarcadores, que consistem em respostas biológicas adversas que são específicas de uma exposição a toxinas ambientais, para serem usadas como ferramentas de avaliação da qualidade ambiental. Neste trabalho foram analisadas respostas a nível molecular e celular, em minhocas, ratinhos do campo e humanos, a fim de determinar o risco químico e radiológico dos resíduos provenientes da mina de urânio da Cunha Baixa. Este trabalho teve também como objectivo a clarificação das respostas subjacentes à exposição a metais e radionuclídeos, a fim de permitir o desenvolvimento de potenciais novos biomarcadores moleculares. Durante este trabalho foram efectuados ensaios com minhocas, em que estas foram expostas durante 56 dias a solo contaminado proveniente da mina de urânio da Cunha Baixa, em laboratório e in situ. Durante a exposição foram analisados vários parâmetros, como o crescimento, reprodução, bioacumulação de metais e radionuclídeos, histopatologia, danos no DNA, citotoxicidade e perfil de expressão genética. Para além disso, foram amostrados ratinhos do campo na mina de urânio da Cunha Baixa e numa área de referência para determinação de danos no DNA, níveis de expressão e mutações em genes supressores de tumores e também bioacumulação de metais. Por fim, foram recolhidas amostras de sangue em voluntários saudáveis pertencentes à população da aldeia da Cunha Baixa, para determinação de danos no DNA, imunofenotipagem e quantificação de metais no sangue. Os resultados revelaram que as minhocas assim como os ratinhos do campo foram negativamente afetados pela exposição aos resíduos mineiros em todos os níveis de organização biológica aqui analisados, o que faz destes organismos bons indicadores para a determinação do risco destas áreas contaminadas, evidenciando o potencial risco da exposição a estes contaminantes. Para além disso, o estudo feito à população da Cunha Baixa revelou danos no ADN e diminuição de populações importantes de células imunitárias (nomeadamente linfócitos T e NK), o que poderá resultar da exposição aos resíduos da mina, tornando as pessoas mais susceptíveis ao desenvolvimento de processos de carcinogénese. O presente estudo contribuiu significativamente para a caracterização dos riscos da exposição a resíduos provenientes de minas de urânio abandonadas, evidenciando os seus efeitos negativos a nível molecular e celular, que potencialmente poderão causar instabilidade genómica e aumentar o risco de desenvolvimento de doenças genéticas.

Genotoxic risk of herbicides to Anguilla anguilla L.

No contexto dos contaminantes aquáticos, os herbicidas são considerados como um dos grupos mais perigosos. Uma vez aplicados, estes são facilmente transportados para cursos de água, quer devido a uma pulverização pouco cuidada ou devido a fenómenos de escorrência superficial e/ou subterrânea. A presença destes agroquímicos no ambiente tem vindo a ser associada a efeitos nefastos em organismos não-alvo, como é o caso dos peixes. Contudo, existe ainda uma grande lacuna no que diz respeito à informação científica relacionada com o seu impacto genotóxico. Deste modo, a presente tese foi delineada com o intuito de avaliar o risco genotóxico em peixes de duas formulações de herbicidas: o Roundup®, que tem como princípio activo o glifosato, e o Garlon®, que apresenta o triclopir na base da sua constituição, produtos estes largamente utilizados na limpeza de campos agrícolas, assim como em florestas. Foi ainda planeado desenvolver uma base de conhecimento no que diz respeito aos mecanismos de dano do ADN. Como último objectivo, pretendeu-se contribuir para a mitigação dos efeitos dos agroquímicos no biota aquático, nomeadamente em peixes, fornecendo dados científicos no sentido de melhorar as práticas agrícolas e florestais. Este estudo foi realizado adoptando a enguia europeia (Anguilla anguilla L.) como organismo-teste, e submetendo-a a exposições de curta duração (1 e 3 dias) dos produtos comerciais mencionados, em concentrações consideradas ambientalmente realistas. Para a avaliação da genotoxicidade foram aplicadas duas metodologias: o ensaio do cometa e o teste das anomalias nucleares eritrocíticas (ANE). Enquanto o ensaio do cometa detecta quebras na cadeia do ADN, um dano passível de ser reparado, o aparecimento das ANE revela lesões cromossomais, sinalizando um tipo de dano de difícil reparação. O ensaio do cometa foi ainda melhorado com uma nova etapa que incluiu a incubação com enzimas de reparação (FPG e EndoIII), permitindo perceber a ocorrência de dano oxidativo no ADN. No que diz respeito ao Roundup®, o envolvimento do sistema antioxidante como indicador de um estado próoxidante foi também alvo de estudo. Uma vez que as referidas formulações se apresentam sob a forma de misturas, o potencial genotóxico dos seus princípios activos foi também avaliado individualmente. No caso particular do Roundup®, também foram estudados o seu surfactante (amina polietoxilada; POEA) e o principal metabolito ambiental (ácido aminometilfosfórico; AMPA). Os resultados obtidos mostraram a capacidade do Roundup® em induzir tanto dano no ADN (em células de sangue, guelras e fígado) como dano cromossómico (em células de sangue). A investigação sobre o possível envolvimento do stresse oxidativo demonstrou que o tipo de dano no ADN varia com as concentrações testadas e com a duração da exposição. Deste modo, com o aumento do tempo de exposição, os processos relacionados com o envolvimento de espécies reactivas de oxigénio (ERO) ganharam preponderância como mecanismo de dano no ADN, facto que é corroborado pela activação do sistema antioxidante observado nas guelras, assim como pelo aumento dos sítios sensíveis a FPG em hepatócitos. O glifosato e o POEA foram também considerados genotóxicos. O POEA mostrou induzir uma maior extensão de dano no ADN, tanto comparado com o glifosato como com a mistura comercial. Apesar de ambos os componentes contribuirem para a genotoxicidade da formulação, a soma dos seus efeitos individuais nunca foi observada, apontando para um antagonismo entre eles e indicando que o POEA não aumenta o risco associado ao princípio activo. Deste modo, realça-se a necessidade de regulamentar limiares de segurança para todos os componentes da formulação, recomendando, em particular, a revisão da classificação do risco do POEA (actualmente classificado com “inerte”). Uma vez confirmada a capacidade do principal metabolito do glifosato – AMPA – em exercer dano no ADN assim como dano cromossómico, os produtos da degradação ambiental dos princípios activos assumem-se como um problema silencioso, realçando assim a importância de incluir o AMPA na avaliação do risco relacionado com herbicidas com base no glifosato. A formulação Garlon® e o seu princípio activo triclopir mostraram um claro potencial genotóxico. Adicionalmente, o Garlon® mostrou possuir um potencial genotóxico mais elevado do que o seu princípio activo. No entanto, a capacidade de infligir dano oxidativo no ADN não foi demonstrada para nenhum dos agentes. No que concerne à avaliação da progressão do dano após a remoção da fonte de contaminação, nem os peixes expostos a Roundup® nem os expostos a Garlon® conseguiram restaurar completamente a integridade do seu ADN ao fim de 14 dias. No que concerne ao Roundup®, o uso de enzimas de reparação de lesões específicas do ADN associado ao teste do cometa permitiu detectar um aparecimento tardio de dano oxidativo, indicando deste modo um decaimento progressivo da protecção antioxidante e ainda uma incapacidade de reparar este tipo de dano. O período de pós-exposição correspondente ao Garlon® revelou uma tendência de diminuição dos níveis de dano, apesar de nunca se observar uma completa recuperação. Ainda assim, foi evidente uma intervenção eficiente das enzimas de reparação do ADN, mais concretamente as direccionadas às purinas oxidadas. A avaliação das metodologias adoptadas tornou evidente que o procedimento base do ensaio do cometa, que detecta apenas o dano nãoespecífico no ADN, possui algumas limitações quando comparado com a metodologia que incluiu a incubação com as enzimas de reparação, uma vez que a última mostrou reduzir a possibilidade de ocorrência de resultados falsos negativos. Os dois parâmetros adoptados (ensaio do cometa e teste das ANE) demonstraram possuir aptidões complementares, sendo assim recomendado a sua utilização conjunta com vista a efectuar uma avaliação mais adequada do risco genotóxico. Globalmente, os resultados obtidos forneceram indicações de grande utilidade para as entidades reguladoras, contribuindo ainda para a (re)formulação de medidas de conservação do ambiente aquático. Neste sentido, os dados obtidos apontam para a importância da avaliação de risco dos herbicidas incluir testes de genotoxicidade. A magnitude de risco detectada para ambas as formulações adverte para a necessidade de adopção de medidas restritivas em relação à sua aplicação na proximidade de cursos de água. Como medidas mitigadoras de impactos ambientais, aponta-se o desenvolvimento de formulações que incorporem adjuvantes selecionados com base na sua baixa toxicidade.

Extension of electrochemically active sites in SOFCs and SOECs

Solid oxide fuel (SOFCs) and electrolyzer (SOECs) cells have been promoted as promising technologies for the stabilization of fuel supply and usage in future green energy systems. SOFCs are devices that produce electricity by the oxidation of hydrogen or hydrocarbon fuels with high efficiency. Conversely, SOECs can offer the reverse reaction, where synthetic fuels can be generated by the input of renewable electricity. Due to this similar but inverse nature of SOFCs and SOECs, these devices have traditionally been constructed from comparable materials. Nonetheless, several limitations have hindered the entry of SOFCs and SOECs into the marketplace. One of the most debilitating is associated with chemical interreactions between cell components that can lead to poor longevities at high working temperatures and/or depleted electrochemcial performance. Normally such interreactions are countered by the introduction of thin, purely ionic conducting, buffer layers between the electrode and electrolyte interface. The objective of this thesis is to assess if possible improvements in electrode kinetics can also be obtained by modifying the transport properties of these buffer layers by the introduction of multivalent cations. The introduction of minor electronic conductivity in the surface of the electrolyte material has previously been shown to radically enhance the electrochemically active area for oxygen exchange, reducing polarization resistance losses. Hence, the current thesis aims to extend this knowledge to tailor a bi-functional buffer layer that can prevent chemical interreaction while also enhancing electrode kinetics.The thesis selects a typical scenario of an yttria stabilized zirconia electrolyte combined with a lanthanide containing oxygen electrode. Gadolinium, terbium and praseodymium doped cerium oxide materials have been investigated as potential buffer layers. The mixed ionic electronic conducting (MIEC) properties of the doped-cerium materials have been analyzed and collated. A detailed analysis is further presented of the impact of the buffer layers on the kinetics of the oxygen electrode in SOFC and SOEC devices. Special focus is made to assess for potential links between the transport properties of the buffer layer and subsequent electrode performance. The work also evaluates the electrochemical performance of different K2NiF4 structure cathodes deposited onto a peak performing Pr doped-cerium buffer layer, the influence of buffer layer thickness and the Pr content of the ceria buffer layer. It is shown that dramatic increases in electrode performance can be obtained by the introduction of MIEC buffer layers, where the best performances are shown to be offered by buffer layers of highest ambipolar conductivity. These buffer layers are also shown to continue to offer the bifunctional role to protect from unwanted chemical interactions at the electrode/electrolyte interface.

Development of a sustainable method for the extraction of lycopene and β-carotene from food wastes

The main objective of the present work is the study of a profitable process not only in the extraction and selective separation of lycopene and β-carotene, two compounds present in tomato, but also in its potential application to food industry wastes. This is one of the industries that produce larger amounts of wastes, which are rich in high value biomolecules with great economic interest. However, the conventional methods used to extract this kind of compounds are expensive which limits their application at large scale. Lycopene and βcarotene are carotenoids with high commercial value, known for their antioxidant activity and benefits to human health. Their biggest source is tomato, one of the world’s most consumed fruits, reason for which large quantities of waste is produced. This work focuses on the study of diverse solvents with a high potential to extract carotenoids from tomato, as well as the search for more environmentally benign solvents than those currently used to extract lycopene and β-carotene from biomass. Additionally, special attention was paid to the creation of a continuous process that would allow the fractionation of the compounds for further purification. Thus, the present work started with the extraction of both carotenoids using a wide range of solvents, namely, organic solvents, conventional salts, ionic liquids, polymers and surfactants. In this stage, each solvent was evaluated in what regards their capacity of extraction as well as their penetration ability in biomass. The results collected showed that an adequate selection of the solvents may lead to the complete extraction of both carotenoids in one single step, particularly acetone and tetrahydrofuran were the most effective ones. However, the general low penetration capacity of salts, ionic liquids, polymers and surfactants makes these solvents ineffective in the solid-liquid extraction process. As the organic solvents showed the highest capacity to extract lycopene and βcarotene, in particular tetrahydrofuran and acetone, the latter solvent used in the development process of fractionation, using to this by strategic use of solvents. This step was only successfully developed through the manipulation of the solubility of each compound in ethanol and n-hexane. The results confirmed the possibility of fractionating the target compounds using the correct addition order of the solvents. Approximately, 39 % of the β-carotene was dissolved in ethanol and about 64 % of lycopene was dissolved in n-hexane, thus indicating their separation for two different solvents which shows the selective character of the developed process without any prior stage optimization. This study revealed that the use of organic solvents leads to selective extraction of lycopene and β-carotene, allowing diminishing the numerous stages involved in conventional methods. At the end, it was possible to idealize a sustainable and of high industrial relevance integrated process, nevertheless existing the need for additional optimization studies in the future.

Élaboration d'une grille d'analyse des conceptions de l'apprentissage sous-jacentes à des sites Internet destinés à l'enseignement des sciences au secondaire

Les progrès récents dans le domaine des technologies de l'information et de la communication (TIC) ouvrent de nouvelles possibilités pour l'enseignement en général et pour celui des sciences en particulier. Les efforts gouvernementaux en cette matière indiquent le caractère pour le moins irréversible de la percée des TIC en éducation et de la nécessite de se pencher sur le matériel qui est offert. Plus particulièrement, nous nous sommes intéressés à la question des conceptions de l'apprentissage qui peuvent sous-tendre l'élaboration d'un site Internet pour l'enseignement des sciences au secondaire. Cette recherche est de type développement. Elle s'intéresse à l'enseignement des sciences au secondaire et au matériel disponible dans Internet. Elle se limite aux premières étapes particulières à ce type de recherche, soit celles de l'exploration de la littérature, de la validation des énoncés par un comité d'experts et de l'élaboration d'une grille d'analyse des conceptions de l'apprentissage sous-jacentes aux sites Internet. Le but de cette recherche est de construire un outil d'analyse des conceptions de l'apprentissage sous-jacentes à des sites Internet pour l'enseignement des sciences au secondaire."--Résumé abrégé par UMI.

Generation of acid sites by incorporation of cobalt in the AFR structure

Pure CoAPO4-40 and CoAPSO-40 samples have been synthesized. The CoII <=> CoIII framework transformation, and hence the number of potential acid sites has been evaluated by spectroscopic techniques and using m-xylene isomerization as model reaction.

Bio-synthesis of nanosized semiconductors using mine wastes as material sources

This work describes the synthesis of nanosized metal sulfides and respective SiO2 and/or TiO2 composites in high yield via a straightforward process, under ambient conditions (temperature and pressure), by adding to aqueous metals a nutrient solution containing biologically generated sulfide from sulfate-reducing bacteria (SRB). The nanoparticles‘ (NPs) morphological properties were shown not to be markedly altered by the SRB growth media composition neither by the presence of bacterial cells. We further extended the work carried out, using the effluent of a bioremediation system previously established. The process results in the synthesis of added value products obtained from metal rich effluents, such as Acid Mine Drainage (AMD), when associated with the bioremediation process. Precipitation of metals using sulfide allows for the possibility of selective recovery, as different metal sulfides possess different solubilities. We have evaluated the selective precipitation of CuS, ZnS and FeS as nanosized metal sulfides. Again, we have also tested the precipitation of these metal sulfides in the presence of support structures, such as SiO2. Studies were carried out using both artificial and real solutions in a continuous bioremediation system. We found that this method allowed for a highly selective precipitation of copper and a lower selectivity in the precipitation of zinc and iron, though all metals were efficiently removed (>93% removal). This research has also demonstrated the potential of ZnS-TiO2 nanocomposites as catalysts in the photodegradation of organic pollutants using the cationic dye, Safranin-T, as a model contaminant. The influence of the catalyst amount, initial pH and dye concentration were also evaluated. Finally, the efficiency of the precipitates as catalysts in sunlight mediated photodegradation was investigated, using different volumes of dye-contaminated water (150 mL and 10 L). This work demonstrates that all tested composites have the potential to be used as photocatalysts for the degradation of Safranin-T.

Temporal and Georaphical Variations in Grass Pollen Seasons in Areas of Western Europe: an Analysis of Season dates at Sites of the European Pollen Information System.

Geographical and temporal variations in the start dates of grass pollen seasons are described for selected sites of the European Pollen Information Service. Daily average grass pollen counts are derived from Network sites in Finland, the Netherlands, Denmark, United Kingdom, Austria, Italy and Spain, giving a broad longitudinal transect over Western Europe. The study is part of a larger project that also examines annual and regional variations in the severity, timing of the peak and duration of the grass pollen seasons. For several sites, data are available for over twenty years enabling long term trends to be discerned. The analyses show notable contrasts in the progression of the seasons annually with differing lag times occurring between southern and northern sites in various years depending on the weather conditions. The patterns identified provide some insight into geographical differences and temporal trends in the incidence of pollinosis. The paper discusses the main difficulties involved in this type of analysis and notes possibilities for using data from the European Pollen Information service to construct pan European predictive models for pollen seasons.

Comparison of Poaceae Pollen Counts Recorded at Sites in Portugal, Spain and the UK

The main aim of this study was to analyse the temporal and spatial variations in grass (Poaceae) pollen counts (2005–2011) recorded in Évora (Portugal), Badajoz (Spain) and Worcester (UK). Weekly average data were examined using nonparametric statistics to compare differences between places. On average, Évora recorded the earliest start dates of the Poaceae pollen seasons and Worcester the latest. The intensity of the Poaceae pollen season varied between sites, with Worcester usually recording the least and Évora the most grass pollen in a season. Mean durations of grass pollen seasons were 77 days in Évora, 78 days in Badajoz and 59 days in Worcester. Overall, longer Poaceae pollen seasons coincided with earlier pollen season start dates. Weekly pollen data, from March to September, from the three pollen-monitoring stations studied were compared. The best fit and most statistically significant correlations were obtained by moving Worcester data backward by 4 weeks (Évora, r = 0.810, p < 0.001) and 5 weeks (Badajoz,r = 0.849, p < 0.001). Weekly data from Worcester therefore followed a similar pattern to that of Badajoz and Évora but at a distance of more than 1,500 km and 4–5 weeks later. The sum of pollen recorded in a season was compared with monthly rainfall between January and May. The strongest positive relationship between season intensity and rainfall was between the annual sum of Poaceae pollen recorded in the season at Badajoz and Évora and total rainfall during January and February. Winter rainfall noticeably affects the intensity of Poaceae pollen seasons in Mediterranean areas, but this was not as important in Worcester.

Readjusting our Sporting Sites/Sight: Sportification and the Theatricality of Social Life

This paper points out the potential of using sport for the analysis of society. Cultivated human movement is a specific social and cultural subsystem (involving sport, movement culture and physical culture), yet it becomes a part of wider social discourses by extending some of its characteristics into various other spheres. This process, theorised as sportification, provides as useful concept to examine the permeation of certain phenomena from the area of sport into the social reality outside of sport. In this paper, we investigate the phenomena of sportification which we parallel with visual culture and spectatorship practices in the Renaissance era. The emphasis in our investigation is on theatricality and performativity; particularly, the superficial spectator engagement with modern sport and sporting spectacles. Unlike the significance afforded to visualisation and deeper symbolic interpretation in Renaissance art, contemporary cultural shifts have changed and challenged the ways in which the active and interacting body is positioned, politicised, symbolised and ultimately understood. We suggest here that the ways in which we view sport and sporting bodies within a (post)modern context (particularly with the confounding amalgamations of signs and symbols and emphasis on hyper-realities) has invariably become detached from sports’ profound metaphysical meanings and resonance. Subsequently, by emphasising the associations between social theatrics and the sporting complex, this paper aims to remind readers of ways that sport—as a nuanced phenomenon—can be operationalised to help us to contemplate questions about nature, society, ourselves and the complex worlds in which we live.

Investigating Behaviour and Face Encoding in a Hypothetical Real-World Social Contract: Handwashing in Hazardous Health Settings

Investigations into the evolutionary origins of human cognition has shown that individuals’ memory for others is influenced by the latter’s behaviour in social contracts. Such research is primarily based on hypothetical or more abstract forms of social contracts, whereas an application of this knowledge to everyday health behaviours can be of great value. To address this, the current study investigated whether participants who were asked to imagine themselves in a hypothetical hazardous health scenario showed differential response sensitivity (d’) and latency (RT) to faces of hospital staff tagged with contrasting hand hygiene before touching patients: clean hands, dirty hands, or unknown hand-washing behaviour (control). The test used a two alternative forced-choice (2AFC: “old/new”) face recognition paradigm. The findings showed that d’ to dirty and clean hands was similar, but higher than for controls. Moreover, d’ was not affected by the occupation of hospital staff (nurses vs porters). The absence of memory gains towards clean or dirty hands points to the need for new strategies to remind patients to observe (and remember) the hand hygiene of others when exposed to hazardous health environments.

Nanoporous carbons from sisal residues and their application in hybrid TiO2/carbon photocatalysts for the removal and degradation of phenol in solution

Tese de doutoramento, Química (Química Tecnológica), Universidade de Lisboa, Faculdade de Ciências, 2016