Estudo de antenas patches de microfita miniaturizadas em banda larga para aplicação em dispositivos móveis e portáteis

This work presents techniques used to design and manufacture microstrip patch antennas for applications in portable and mobile devices. To do so, are evaluated several factors that can influence the performance of microstrip patch antennas. Miniaturization techniques are studied and employed in order to apply this type of antenna in mobile and / or mobile. The theories of microstrip patch antennas are addressed by analyzing characteristics such as constitution, kinds of patches, substrates, feeding methods, analysis methods, the main advantages and disadvantages and others. Techniques for obtaining broadband microstrip patch antennas were surveyed in literature and exemplified mainly by means of simulations and measurements. For simulations of the antennas was used the commercial software . In addition, antenna miniaturization techniques have been studied as a main concern the fundamental limits of antennas with special attention to electrically small antennas because they are directly linked to the microstrip patch antennas. Five design antennas are proposed to demonstrate the effectiveness of techniques used to obtain the microstrip patch antennas broadband and miniaturized for use in mobile devices and/or portable. For this, the proposed antennas were simulated, built and measured. The antennas are proposed to be used in modern systems of wireless communications such as DTV, GPS, IEEE 802.16, IEEE 802.11, etc. The simulations of the antennas were made in business and computer programs. The measured results were obtained with a parser Vector of networks of the Rhode and Schwarz model ZVB 14

Análise de onda completa de superfície seletiva em freqüência do tipo anteparo duplo

This work presents a theoretical analysis and numerical and experimental results of the scattering characteristics of frequency selective surfaces, using elements of type patch perfectly conductor. The structures are composed of two frequency selective surfaces on isotropic dielectric substrates cascaded, separated by a layer of air. The analysis is performed using the method of equivalent transmission line in combination with the Galerkin method, to determine the transmission and reflection characteristics of the structures analyzed. Specifically, the analysis uses the impedance method, which models the structure by an equivalent circuit, and applies the theory of transmission lines to determine the dyadic Green's function for the cascade structure. This function relates the incident field and surface current densities. These fields are determined algebraically by means of potential incidents and the imposition of the continuity of the fields in the dielectric interfaces. The Galerkin method is applied to the numerical determination of the unknown weight coefficients and hence the unknown densities of surface currents, which are expanded in terms of known basis functions multiplied by these weight coefficients. From the determination of these functions, it becomes possible to obtain numerical scattered fields at the top and bottom of the structures and characteristics of transmission and reflection of these structures. At work, we present numerical and experimental results for the characteristics of transmission and reflection. Comparisons were made with other results presented in literature, and it was observed a good agreement in the cases presented suggestions continuity of the work are presented

Desenvolvimento de antenas de microfita com aberturas nos patches condutores através do método da segmentação

Microstrip antennas are widely used in modern telecommunication systems. This is particularly due to the great variety of geometries and because they are easily built and integrated to other high frequency devices and circuits. This work presents a study of the properties of the microstrip antenna with an aperture impressed in the conducting patch. Besides, the analysis is performed for isotropic and anisotropic dielectric substrates. The Multiport Network Model MNM is used in combination with the Segmentation Method and the Greens function technique in the analysis of the considered microstrip antenna geometries. The numerical analysis is performed by using the boundary value problem solution, by considering separately the impedance matrix of the structure segments. The analysis for the complete structure is implemented by choosing properly the number and location of the neighboor element ports. The numerial analysis is performed for the following antenna geometries: resonant cavity, microstrip rectangular patch antenna, and microstrip rectangular patch antenna with aperture. The analysis is firstly developed for microstrip antennas on isotropic substrates, and then extended to the case of microstrip antennas on anisotropic substrates by using a Mapping Method. The experimental work is described and related to the development of several prototypes of rectangular microstrip patch antennas wtih and without rectangular apertures. A good agreement was observed between the simulated and measured results. Thereafter, a good agreement was also observed between the results of this work and those shown in literature for microstrip antennas on isotropic substrates. Furthermore, results are proposed for rectangular microstrip patch antennas wtih rectangular apertures in the conducting patch

Simulação computacional do escoamento em bombas de cavidades progressivas

The use of Progressing Cavity Pumps (PCPs) in artificial lift applications in low deep wells is becoming more common in the oil industry, mainly, due to its ability to pump heavy oils, produce oil with large concentrations of sand, besides present high efficiency when compared to other artificial lift methods. Although this system has been widely used as an oil lift method, few investigations about its hydrodynamic behavior are presented, either experimental or numeric. Therefore, in order to increase the knowledge about the BCP operational behavior, this work presents a novel computational model for the 3-D transient flow in progressing cavity pumps, which includes the relative motion between rotor and stator, using an element based finite volume method. The model developed is able to accurately predict the volumetric efficiency and viscous looses as well as to provide detailed information of pressure and velocity fields inside the pump. In order to predict PCP performance for low viscosity fluids, advanced turbulence models were used to treat, accurately, the turbulent effects on the flow, which allowed for obtaining results consistent with experimental values encountered in literature. In addition to the 3D computational model, a simplified model was developed, based on mass balance within cavities and on simplification on the momentum equations for fully developed flow along the seal region between cavities. This simplified model, based on previous approaches encountered in literature, has the ability to predict flow rate for a given differential pressure, presenting exactness and low CPU requirements, becoming an engineering tool for quick calculations and providing adequate results, almost real-time time. The results presented in this work consider a rigid stator PCP and the models developed were validated against experimental results from open literature. The results for the 3-D model showed to be sensitive to the mesh size, such that a numerical mesh refinement study is also presented. Regarding to the simplified model, some improvements were introduced in the calculation of the friction factor, allowing the application fo the model for low viscosity fluids, which was unsuccessful in models using similar approaches, presented in previous works

Análise de desempenho de um fogão solar com parabola fabricada em material compósito

It is presented a solar cooker made with a parabolic reflector composed by a composite material. For this purpose, it was utilized a cast concrete with a parabolic profile obtained by means of modeling. It will be demonstrated the manufacturing process and settings, as well as tests results, in order to determine the contact temperature and cooking time of some foods. This solar cooker presents the following main characteristics: the concentration method, low cost and easy manufacturing process. It was performed by employing recycled materials such as cement, plaster, crushed polystyrene and wheels. The captation area measures 1 square meter and its parabole was covered with a mirrors measuring 25 cm2. A temperature higher than 650°C was obtained. Furthermore, it has been demonstrated that the cooking viability for several type of foods such as beans, potatoes, rice, yams and pasta can be used in two meals for a family of four. In addition, the advantages of this cooker were analysed in comparison with others described in literature as well as those operating on gas. Especially in Northeast of Brazil, where there is a potential for solar energy, this prototype is an important tool, because it avoids not only desertification, but also pollutants from burning firewoods which cause ecological imbalance

Modelagem dinâmica do escoamento de um sistema de elevação por plunger lift

A critical problem in mature gas wells is the liquid loading. As the reservoir pressure decreases, gas superficial velocities decreases and the drag exerted on the liquid phase may become insufficient to bring all the liquid to the surface. Liquid starts to drain downward, flooding the well and increasing the backpressure which decreases the gas superficial velocity and so on. A popular method to remedy this problem is the Plunger Lift. This method consists of dropping the "plunger"to the bottom of the tubing well with the main production valve closed. When the plunger reaches the well bottom the production valve is opened and the plunger carry the liquid to the surface. However, models presented in literature for predicting the behavior in plunger lift are simplistic, in many cases static (not considering the transient effects). Therefore work presents the development and validation of a numerical algorithm to solve one-dimensional compressible in gas wells using the Finite Volume Method and PRIME techniques for treating coupling of pressure and velocity fields. The code will be then used to develop a dynamic model for the plunger lift which includes the transient compressible flow within the well

Desenvolvimento de um destilador solar para tratamento de águas de produção de petróleo com vistas a sua utilização na agricultura e geração de vapor

The production of petroleum is frequently accomplished with great volumes of water, that it is carried of the underground with the oil. It is a challenge of the present century the development of technologies that allow the use of waste water for purposes that consume great amounts of water and don't demand as rigid as the one of the drinking water requirements. The solar distillation has been configuring as an alternative of clean technology for desalination of brine and saline. Besides causing the minimum possible damage to the environment, it takes advantage of an abundant and free energy source: the solar energy. That study aims to develop a Solar Distillator for treatment of the produced water of the oil wells, to obtain an efluent to use in agriculture and vapor generation. The methodology for collection, conservation and analysis of the physical-chemical parameters obeyed the norms in APHA (1995). The sampling was of the composed type. Experiments were accomplished in the solar distillation pilot and simulation in thermostatic bathing. The operation was in batch system and for periods of 4, 6 and 12 h. The developed Distillator is of the type simple effect of two waters. It was still tested two inclination angles for covering; 20º and 45º. The Distillator presented minimum of 2,85 L/m2d revenues and maximum of 7,14 L/m2d. The removals of salts were great than 98%. The removal of TOC in the simulation was great than 90%. In agreement with the data of energy and mass balance, it was verified that the developed solar Distillator presented compatible revenues with those found in literature for similar types. It can be inferred that the obtained distilled water assists to the requirements CONAMA in almost all the points and could be used for irrigation of cultures such as cotton and mamona. As the distilled water has characteristics of fresh water it can be used in the generation of vapor

Qualidade de mudas clonais de Eucalyptus urophylla x E. grandis em função do substrato

Considering the increasing demand for seedlings of plants for aforestation and the scarcity of raw materials for the substrates used for plant growth, it is necessary to evaluate new components and formulations that ensure the quality of seedlings. In this experiment the development and quality of production of Eucalyptus urophylla x E. grandis seedlings was studied through vegetative propagation, as a function of nine compositions of substrate, produced from fine-grained vermiculite, carbonized rice chaff and coconut fiber in hard plastic tubes of 50 mL as containers. The physical properties of substrates and morphological development and the quality of the root system of seedlings were evaluated at 90 days after staking. The substrates with higher total porosity promotes better quality of the root system, which consequently results in cuttings with larger diameter, shoot and root dry weight and Dickson Quality Index. Other properties for the physical characteristics of substrates other than mentioned in literature can also be considered adequate.

El mito, el paisaje y el hombre en la literatura ando-boliviana

This research was based on a study regarding the myth, the landscape and then man in Bolivian literature, a country whose cultural tradition transcends myth and reality, with an exotic nature, inherited from extraordinary people from a remote time, with archeological remains that show its glory, making it particular among other Latin American literatures. To contextualize the literary study of this nation, rich in fantasy literature, understanding its traits in the current literature, we have sought to rescue the history of its first inhabitants, the Kollas, and the cultural reference they inherited and reviewed in the acculturation process between indigenous and Spanish people. This study is based on the contributions of Latin American theorists, such as Antonio Conejo Polar, Nestor Canclini, the Cuban ethnologist Fernando Ortiz, and especially the concept of transculturation of the Uruguayan critic Ángel Rama. Thus, we have tried to rescue a study about the Andean past, approaching the fundamentals of mythic component in literature, addressing landscape and nature as the ones that illustrate, characterize and give life to the mythical characters and social problems of the Andean man

Crescimento e estado nutricional de crianças e adolescentes de Presidente Prudente, São Paulo, Brasil

OBJETIVOS: avaliar peso, altura, índice de massa corporal (IMC) e prevalência de sobrepeso e obesidade de crianças e adolescentes de Presidente Prudente, São Paulo, Brasil. MÉTODOS: foram avaliados 1327 jovens (692 masculino e 635 feminino) com idade de 7 a 19 anos. Os dados foram coletados com o mesmo equipamento e seguindo procedimento padrão descrito na literatura. O teste t de Student para variáveis independentes foi utilizado para as comparações entre sexo (p<0,05), e foram calculados os percentis para cada idade. Utilizou-se o programa SPSS, versão-10.0. A plotagem das curvas foi realizada no programa Minitab, versão-14.0. Os percentis 85 e 95 serviram para classificação de sobrepeso e de obesidade e foram analisados em relação aos dois estudos mais aceitos internacionalmente. RESULTADOS o peso e a altura estão acima dos valores encontrados em outras regiões brasileiras e semelhantes a dos países desenvolvidos. O IMC revelou alta prevalência de sobrepeso e obesidade, principalmente no sexo masculino, entre 7 e 10 anos. Esta prevalência foi menor no grupo feminino, especialmente entre as adolescentes. CONCLUSÕES: a amostra apresenta padrão de crescimento acima de outras regiões brasileiras e comparáveis a países desenvolvidos, entretanto o IMC indica alta prevalência de sobrepeso e obesidade.

Exercício resistido no cardiopata: revisão sistemática

INTRODUÇÃO: A perda de massa muscular secundária à idade e à inatividade física é clinicamente relevante na população cardíaca; contudo, a prescrição do exercício resistido dinâmico para esses pacientes apresenta-se inconclusiva na literatura. OBJETIVOS: Reunir informações e apresentar as principais diretrizes relacionadas à prescrição de exercícios resistidos em cardiopatas. MATERIAIS E MÉTODOS: Foi realizada busca sistemática de literatura, a partir das bases de dados LILACS, SciELO e MEDLINE, utilizando os seguintes descritores na língua portuguesa: força muscular, exercício isométrico, esforço físico, cardiopatia e coronariopatia, e seus correspondentes na língua inglesa (muscle strength, isometric exercise, physical effort, heart disease e artery coronary disease), os quais foram pesquisados separadamente e em cruzamentos, sendo considerados para esta revisão apenas artigos publicados entre 2005 e 2010. RESULTADOS E DISCUSSÃO: de um total de 806 artigos foram selecionados 22 para integrar a revisão, sendo 14 estudos classificados como artigos originais, 2 artigos de atualização da literatura e 6 artigos de revisão, além do capítulo 8 do livro intitulado Diretrizes do ACSM (American College of Sports Medicine) para os testes de esforço e sua prescrição, publicado em 2007. CONCLUSÃO: O exercício resistido, independente da variada metodologia utilizada na prescrição dos componentes específicos do treinamento, mostrou-se eficiente para aumentar a força muscular de membros superiores e inferiores em cardiopatas e sua aplicação pode ser considerada segura para esses pacientes, desde que prescrito corretamente.

Inês de Castro no romance contemporâneo português

Ines de Castro is a theme in literature from the fourteenth century. The historical fact of his death, in 1355, became a landmark in the history of Portugal and, since then, several literary texts from various genres, have dealt with this theme, this made the couple Pedro and Ines a myth of love passion, of love beyond the barriers of death, like Tristan and Isolde, Romeo and Juliet, Abelard and Heloise. The literary myth - or any picture that mythologize literature - is always prepared before culturally and works in the same way that so many others, this is, as an element of cultural identity, either collectively or individually, making it also a feature poetic. Thereby, is an archetype confirmed through time and eventually reveals a series of webs of the human psyche. Ines de Castro became the Portuguese myth of eternal love: she became queen after your dead. The persistence of the myth makes the love story of Pedro and Ines continue to produce texts of various literary genres. This study examines six contemporary historical novels, to show that the way actually this kind o novel does a new formulacion of Pedro e Ines mythical, because now it s different view likes the victim in Os lusiadas and other texts from the past. Collaborate to this news relacions between history and literature and a novelist's new stance in relation to historical facts that relate like reffering to novel. The intention is to show, through the novels chosen now Ines de Castro have different profiles than it had before in tradicional historic novels from the period of Romanticism and New Romanticism. Authored by Agustina Bessa-Luís, João Aguiar, António Cândido Franco, Seomara da Veiga Ferreira and Luis Rosa, the six novels studied show the circularity cultural of inesian myth showing this new character of the new person Ines in the contemporany historical novel

Análise farmacognóstica e atividade antibacteriana de extratos vegetais empregados em formulação para a higiene bucal

A utilização de extratos vegetais vem se tornando uma alternativa importante para a prevenção de doenças periodontais. Este trabalho objetivou desenvolver uma formulação de enxagüatório bucal, contendo, em associação, extratos hidroalcoólicos de Rosmarinus officinalis, Plantago major, Tabebuia impetiginosa, Achillea millefollium e Nasturtium officinale; avaliar sua composição farmacognóstica e sua atividade antibacteriana, como também da fórmula proposta. Foram realizados estudos de pré-formulação e análises farmacognósticas para as espécies vegetais. A atividade antibacteriana in vitro foi observada por meio dos métodos de difusão em disco de papel, por hole- plate e por template, frente a Staphylococcus aureus, Bacillus subtilis, Escherichia colik, Enterococcus faecalis e Pseudomonas aeruginosa. A concentração inibitória mínima (CIM) foi determinada por meio do método de macrodiluições sucessivas em caldo. Os resultados obtidos apresentaram-se de acordo com o histórico farmacognóstico das drogas estudadas. Todas as bactérias foram inibidas pelos extratos, observando-se que as espécies S. aureus e B. subtilis mostraram, aparentemente, maior sensibilidade. A CIM variou, em relação a sensibilidade de cada espécie bacteriana estudada, de 312,5 µL/mL a 1250 µL/mL para os extratos vegetais e de 625 µL/mL a 2500 µL/mL para o enxaguatório bucal. São necessários estudos complementares para a confirmação da eficácia deste produto e sua utilização na prevenção de doenças periodontais.

Estudo das propriedades críticas do processo de contato por par para diferentes atualizações

We study the critical behavior of the one-dimensional pair contact process (PCP), using the Monte Carlo method for several lattice sizes and three different updating: random, sequential and parallel. We also added a small modification to the model, called Monte Carlo com Ressucitamento" (MCR), which consists of resuscitating one particle when the order parameter goes to zero. This was done because it is difficult to accurately determine the critical point of the model, since the order parameter(particle pair density) rapidly goes to zero using the traditional approach. With the MCR, the order parameter becomes null in a softer way, allowing us to use finite-size scaling to determine the critical point and the critical exponents β, ν and z. Our results are consistent with the ones already found in literature for this model, showing that not only the process of resuscitating one particle does not change the critical behavior of the system, it also makes it easier to determine the critical point and critical exponents of the model. This extension to the Monte Carlo method has already been used in other contact process models, leading us to believe its usefulness to study several others non-equilibrium models

CENSUS HISTOGRAMS: A SIMPLE FEATURE EXTRACTION and MATCHING APPROACH FOR FACE RECOGNITION

Most face recognition approaches require a prior training where a given distribution of faces is assumed to further predict the identity of test faces. Such an approach may experience difficulty in identifying faces belonging to distributions different from the one provided during the training. A face recognition technique that performs well regardless of training is, therefore, interesting to consider as a basis of more sophisticated methods. In this work, the Census Transform is applied to describe the faces. Based on a scanning window which extracts local histograms of Census Features, we present a method that directly matches face samples. With this simple technique, 97.2% of the faces in the FERET fa/fb test were correctly recognized. Despite being an easy test set, we have found no other approaches in literature regarding straight comparisons of faces with such a performance. Also, a window for further improvement is presented. Among other techniques, we demonstrate how the use of SVMs over the Census Histogram representation can increase the recognition performance.