Reflexões sobre a formação clínica fenomenológico-existencial na era da técnica

Phenomenology is the focus of this study for its critique of the limits of positivist science, which guides most of the fields of study including Psychology. The clinical formation process in Psychology courses is especially difficult for students-interns who adopt phenomenology as their clinical framework. Such difficulty is due to the incompatibility between theory provided in Psychology courses a science traditionally based on paradigms of scientism , and the theoretical-methodological proposal adopted by the aforementioned approach. As a backdrop for our study, we carefully examined the thought of philosopher Martin Heidegger, especially the Era of Technique. This contemporary technicism society was studied so that we could understand the socio-cultural status where this formation lies. Thus, we questioned if this panorama upon which Clinical Psychology rests favors the development of a phenomenological attitude and a special look at the meanings of existence, as defined in phenomenological clinical practice. Knowing such limits, our research aimed at understanding the experience of formation of clinical psychologists who take part in internships in the field of phenomenology-existentialism. Such study was, then, a phenomenological-hermeneutic research based on Heideggerian ontology and used a semi-structured interview as access tool. Six students of the UFRN higher-degree Psychology course who were doing their supervised internship in clinical psychology and the referred approach took part in this research. The research revealed that the phenomenological-existential formation phase opens a door to discoveries on the part of the intern that transcend the dimension of the other, for they show a self disclosure while a person in the word. Despite the initial discomforts caused by the course curriculum itself and by the freedom for clinical practice, so characteristic of phenomenology, the narratives demonstrate that such difficulties may start a process of search for new meanings, which show a search for sharpening their practices and for a path in balance with the existence of the other

Fidelidade à área e padrão de associação em Sotalia guianensis, baseado na técnica de foto-identificação

The behavioral patterns follow to environmental changes, including area fidelity and individuals association patterns. Several techniques are used to record these behavioral patterns and the photo-identification has been suggested as a proper tool because of its various advantages. Based on this technique, this research verified, between August of 2005 and January of 2006, area fidelity and association patterns of Sotalia guianensis, at Distrito de Pipa s bays, Rio Grande do Norte State south coast. Besides, we measured the association patterns by using the Jaccard index or Half-Weight Index (HWI). According the observation, 22 individuals were not resighted, 11 were resighted, and 36 new individuals were recorded. Nowadays, 69 individuals are cataloged. The residency rate indicated heterogeneity on studied area permanence and the association patterns between photo-identified seem to be context-specific. In addiction, the comparison of associations between two different age classes showed some individuals more frequently interacting with immature individuals. We also observed fluidity on association patterns among our individuals. We suggest that S. guianensis population from Pipa shows plasticity

Técnica de parametrização geométrica para o fluxo de carga continuado baseado nas variáveis tensão nodal e fator de carregamento

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo das ligas titânio-zircônio resultantes do processo de fundição plasma-skull para aplicações como biomateriais

The aim of this work was to study a series of 11 different compositions of Ti-Zr binary alloys resistance to aggressive environment, i. e., their ability to keep their surface properties and mass when exposed to them as a way to evaluate their performance as biomaterials. The first stage was devoted to the fabrication of tablets from these alloys by Plasma-Skull casting method using a Discovery Plasma machine from EDG Equipamentos, Brazil. In a second stage, the chemical composition of each produced tablet was verified. In a third stage, the specimen were submitted to: as-cast microstructure analysis via optical and scanning electron microscopy (OM and SEM), x-ray dispersive system (EDS) chemical analysis via SEM, Vickers hardness tests for mechanical evaluation and corrosion resistence tests in a 0.9% NaCl solution to simulate exposition to human saliva monitored by open circuit potential and polarization curves. From the obtained results, it was possible to infer that specimens A1 (94,07 wt% Ti and 5,93% wt% Zr), A4 (77,81 wt % Ti and 22,19 wt % Zr) and A8 (27,83 wt% Ti and 72,17 wt% Zr), presented best performance regarding to corrosion resistance, homogeneity and hardness which are necessary issues for biomaterials to be applied as orthopedic and odontological prosthesis

Aplicação da técnica eletroanalítica de pulso diferencial usando o eletrodo de carbono vítreo modificado com cisteína para monitorar a degradação eletroquímica de ácido oxálico

In this paper, the technique of differential pulse voltammetry (DPV) has been studied for monitoring the concentration of oxalic acid (OA) during their electrochemical oxidation (EO) in acidic medium using platinum anode supported on titanium (Ti / Pt). The DPV was standardized and optimized using a glassy carbon electrode modified with cysteine. The modification with cysteine was developed electrochemically, forming a polymeric film on the surface of the glassy carbon electrode. The formation of the polymer film was confirmed by analysis of scanning electron microscope and atomic force microscope, confirming the modification of the electrode. The electrochemical degradation was developed using different current densities 10, 20 30 and 40 mA cm -2 electrode with Ti / Pt observing the degradation of oxalic acid, and monitored using the method of KMnO4 titration. However, the analyzes with DPV showed the same behavior elimination of oxalic acid titration. Compared with the titration method classical observed and DPV could be a good fit, confidence limits of detection and confirming the applicability of the technique electroanalytical for monitoring the degradation of oxalic acid

Avaliação clínica de pacientes submetidos à colocação de implantes zigomáticos pela técnica de Stella & Warner

This study aimed to evaluate patients who underwent placement of zygomatic implants technique by Stella & Warner, considering the survival of conventional and zygomatic implants, sinus health and level of patient satisfaction in relation to oral rehabilitation. We evaluated 28 patients where 14 had received conventional and zygomatic implants, being rehabilitated with implant-fixed dentures (group 1) and 14 were rehabilitated only with conventional implants and implant-fixed dentures (group 2). The study had four phases, represented by radiographic evaluation of implants (stage I), clinical evaluation (stage II), assessing the health of the maxillary sinus (stage III) and a questionnaire to measure satisfaction of rehabilitation with fixed prosthesis implant Total -backed (stage IV). Group 2 underwent only stage IV, while group 1 participated in all stages. Descriptive analysis and statistics were performed, using the t test for independent samples in the evaluation of phase IV. The results demonstrated that the technique of Stella & Warner proved effective, allowing a high survival rate of conventional implants and zygomatic (100%), considering a minimum follow-up of 15 months and maximum 53 months after prosthetic rehabilitation. There were no pathological changes in tissues periimplants conventional and zygomatic implants analyzed. Radiographic findings showed satisfactory levels bone implants in the oral rehabilitation with conventional zygomatic implants and a good positioning of the apex of the zygomatic implants over the zygomatic bone. The presence of the zygomatic implant did not cause sinus and the t test showed a satisfaction index lower in group 1 compared with group 2. The zygomatic implant placement technique by Stella & Warner proved to be a predictable technique with high survival rate in patients with atrophic jaws, necessitating long-term follow-up to confirm the initial findings of the study

Passividade na interface prótese/pilar intermediário de infraestrutura implantossuportadas confeccionadas pela tecnologia CAD/CAM e método convencional

The objective of this research was to evaluate the passivity and strain induced in infrastructures screwed on abutments, made by CAD/CAM technology, and to compare these samples with parts manufactured by conventional casting. Using CAD/CAM technology, 4 samples were made from zirconia (Zircad) and 4 samples were manufactured from cobaltchrome (CoCrcad). The control groups were 4 specimens of cobalt-chrome, made by onepiece casting (CoCrci), for a total of 12 infrastructures. To evaluate the passivity, the infraestructures were installed on the abutments. One end was tightened and the vertical gap between the infrastructure and the prosthetic abutment was measured with scanning electron microscopy (250×). The mean strain in these infrastructures was analyzed via the photoelasticity test. A significant difference (p = 0.000) in passivity was observed between the control (CoCrci) and sample groups (CoCrcad and CoCrci). CoCrcad exhibited the best value of passivity (48.76 ± 13.45 μm) and CoCrci the worst (187.55 ± 103.63 μm), Zircad presented an intermediate value (103.81 ± 43.15 μm). When compared to the other groups, CoCrci showed the highest mean strain around the implants (17.19 ± 7.22 kPa). It was concluded that the zirconia infrastructure made by CAD / CAM showed a higher vertical marginal misfit than those made in cobalt-chromium alloy with the same methodology, however, the tension generated in the implants was similar. The CAD/CAM technology is more accurate for passivity and mean strain of infrastructure screwed on abutments than conventional manufacturing techniques

Análises técnica e econômica da cultura da bananeira 'Maçã' (Musa spp.) na região noroeste do Estado de São Paulo

Este trabalho foi realizado no Escritório de Desenvolvimento Rural - Jales, região noroeste do Estado de São Paulo, com o objetivo de efetuar um levantamento do potencial da cultura da banana 'Maçã' na região, determinando-se indicadores técnicos e econômicos de dois sistemas de produção, os quais utilizam, no plantio, mudas micropropagadas e convencional. O levantamento de dados necessários à realização da pesquisa nos aspectos ligados à elaboração das matrizes de coeficientes técnicos, base para estimativas de custos de produção, foi obtido diretamente junto a produtores da região, e a metodologia de custos foi baseada no custo total de produção. Os resultados econômicos mostraram-se satisfatórios na região para os dois sistemas de produção, mas a receita líquida obtida com a utilização de mudas micropropagadas foi 34% maior que a obtida no sistema convencional.

Análise técnica e econômica do cultivo do cajueiro-anão (Anacardium occidentale L.) na regional de Jales-SP

Objetivou-se estimar os custos de produção e lucratividade do caju in natura na Regional de Jales, noroeste do Estado de São Paulo. Os dados foram levantados junto a produtores, a partir da aplicação de questionário e da elaboração de planilhas, para caracterizar todo o processo produtivo e realizar análise econômica. A produção de fruta para mesa exige um sistema de cultivo mais intensivo, principalmente no controle de pragas e doenças; por sua vez, eleva o custo de produção que, via de regra, é compensada pelos preços alcançados. Os custos de produção são altos, mas o que deve ser destacada é a participação relativa das embalagens que pode chegar a um terço do custo operacional efetivo, seguido pelos custos pós-colheita. Os indicadores de lucratividade mostram que a produção de caju é rentável nesta região, e o índice de lucratividade foi de 46,50%.

A assistência técnica e extensão rural no assentamento modelo: proposição e realidade

This discourse analyzes the technical assistance concerning the rural settlement, which is seen as a demand of the social movement that claims for agrarian reformation, and is a goal of II PNRA, launched in may 2004, as a essential national public politics on process of building and consolidation of settlement and familiar agriculture, proposing the return of technical assistance service and rural extension in Brazil, which were started in the and of 1940 s. We analyze, in particular, the technical assistance program, social and environmental agrarian reformation, on model settlement, a program created, especially, to the rural settlements, coordinated by INCRA. Based on the documental analyze and local study, it is noticed that the experience of technical assistance implemented on model settlement shows the non continuation and fragility on technical assistance actions to rural workers. This context goes against the lately technical assistance governmental apparatus, which ensures to make settlements stronger, to support and to get important the familiar agriculture system. This way, technical assistance execution, trough the tertiary service, follows the neoliberal strategy and, the State, besides decreases the estimate to public politics, takes its actions control from the State to the shared control through partnership and transferring of responsibility, expressing its historic lack of attention to the worker class demands. In spite of workers resistance, expectative and hope, the lack of these services, as well as the other politics deficiencies, which are necessary to the settlements, are endangering its activities and threatening its survival in the settlement

As diretrizes da política pública de saúde bucal e suas inflexões nos serviços da Clínica Odontológica da UFRN

The crisis that the Brazilian State have been crossing throughout the last decades has revealed intense oscillations in the the way of life of the population reality. In the health area, specifically of buccal health, new alternatives of attending to demands for odontological services have been increasing from the 1990 decade. The research had as objective to analyze the demand of the services of the clinic-school of odontology of the UFRN to identify the socio-economic profile of the users and the inflections of the standards of the National Politics of Buccal Health. The methodology is based on a dialectic perspective and a quali-quantitative boarding. It was used as instrument of data collection forms with open and closed questions, applied to two distinguished groups of citizens: 53 users of the services and 12 pupils of 9th and 10th term of the Odontology Course. The results reaffirm that, with the aggravation of the crisis of SUS (Sistema Único de Saúde- Single Health System) grow the difficulties of accessing the odontological services of the users majority. The subjects of the research make use of a regular socio-economic condition, with high school, own house, formal bond to labor and monthly medium income between 1 and 2 minimum wages. The conclusive analyses point to the selective and exculpatory character of the buccal health right, mainly, those users who find themselves in situation of extreme poverty and social vulnerability. Immediate and of lesser cost odontological assistance is what it s aimed, but the standards praised in the Public Politics of Buccal Health walk in another direction, requiring a bigger strongness of the formation bases and implementation of the programmatical actions since the academic field until the effectiveness of Politics of Buccal Health as a right while as a right to attention and care

Cooperação técnica internacional: aportes teóricos

Induzidos por uma mudança estrutural na dinâmica da sociedade internacional, muitos municípios, por meio do exercício da chamada paradiplomacia ou diplomacia federativa, vêm elaborando instrumentos de gestão municipal para captar recursos via experiências de Cooperação Técnica Internacional (CTI). Nesse contexto, o objetivo deste artigo é mapear conceitualmente o fenômeno de CTI, visando a facilitar sua compreensão e suas consequências práticas para a sociedade brasileira.

Tratamento da síndrome do roubo devido a fístula arteriovenosa para hemodiálise em membro inferior por meio da técnica de ligadura arterial e revascularização distal (técnica de DRIL)

RESUMO A fístula arteriovenosa com bom fluxo sangüíneo é de fundamental importância para os pacientes portadores de insuficiência renal crônica em tratamento hemodialítico. Uma das complicações da fístula arteriovenosa é a síndrome do roubo, mas esta é de ocorrência incomum, e o seu tratamento está diretamente indicado quando há sintomas manifestos. Vários métodos foram propostos para sua correção nos membros superiores, sendo considerada a revascularização distal com ligadura arterial o procedimento de escolha. Neste relato de caso inédito, descreve-se o tratamento da síndrome do roubo de uma fístula arteriovenosa realizada em membro inferior, tratada com sucesso por meio da mesma técnica indicada para os membros superiores.

Implementação da técnica de software pipelining na rede em chip IPNoSyS

Alongside the advances of technologies, embedded systems are increasingly present in our everyday. Due to increasing demand for functionalities, many tasks are split among processors, requiring more efficient communication architectures, such as networks on chip (NoC). The NoCs are structures that have routers with channel point-to-point interconnect the cores of system on chip (SoC), providing communication. There are several networks on chip in the literature, each with its specific characteristics. Among these, for this work was chosen the Integrated Processing System NoC (IPNoSyS) as a network on chip with different characteristics compared to general NoCs, because their routing components also accumulate processing function, ie, units have functional able to execute instructions. With this new model, packets are processed and routed by the router architecture. This work aims at improving the performance of applications that have repetition, since these applications spend more time in their execution, which occurs through repeated execution of his instructions. Thus, this work proposes to optimize the runtime of these structures by employing a technique of instruction-level parallelism, in order to optimize the resources offered by the architecture. The applications are tested on a dedicated simulator and the results compared with the original version of the architecture, which in turn, implements only packet level parallelism