Entwicklung einer Anordnung zur Nutzung von Massenschwerebewegungen beim Quarzitabbau im Rheinischen Schiefergebirge

Die (Wieder-)Nutzung auf Schwerkraft basierender Fördertechniken, die insbesondere durch das niedrige Energiepreisniveau in den Jahrzehnten nach dem 2. Weltkrieg in der Tagebautechnik nahezu vollständig verdrängt wurden, ist bei den heutigen wirtschaftlichen Randbedingungen und anzustrebenden ökologischen Standards eine Herausforderung für die bergbautreibende Industrie. Seit Aufnahme der Entwicklung des Förderkonzeptes – Geführte Versturztechnik – Mitte der 1990er Jahre haben sich die Kosten für Rohöl vor Steuern nach dem Tiefstand um das Jahr 1998 bis heute mehr als verdreifacht, alleine seit 2004 mehr als verdoppelt. Gesetzliche Regelwerke wie die europäische IVU-Richtlinie 96/61/EG zur „integrierten Vermeidung und Verminderung der Umweltverschmutzung“ fordern, Genehmigungen nur noch bei Einsatz der besten verfügbaren Techniken (BVT oder BAT: „best available techniques“) zu erteilen. Die Umsetzung in nationale Vorschriften wie das Bundes-Immissionsschutzgesetz und nachgeordnete Regelwerke fordern hierauf aufbauend, dass Umweltbelastungen nicht in andere Medien verlagert werden dürfen. Die Anordnung einer Versturzrinne zur Nutzung von Massenschwerebewegungen am Beispiel von Quarzitabbau im Rheinischen Schiefergebirge bei denen die Förderbezugsebene unterhalb der Strossen liegt, die zur sichern und selektiven Gewinnung des Rohstoffs aufgefahren werden müssen, erfüllt durch Rückgriff auf ein vermeintlich „archaisches“ Förderkonzept durch Nutzung der Schwerkraft die obigen Anforderungen. Offenkundige Umweltbelastungen, die alleine durch die Verbrennung von Dieselkraftstoff und hieraus resultierender Schadstoff- und Wärmeeinträge in die Luft beim verbreiteten Einsatz von SLKW zur Abwärtsförderung entstehen, können erheblich vermindert werden. Der Aspekt der Betriebssicherheit einer solchen Anordnung kann durch Auffahren eines geradlinigen Bauwerks mit an das Fördergut angepassten Dimensionen sowie Einrichtungen zur Beschränkung der kinetischen Energie erreicht werden. Diese stellen auch gleichzeitig sicher, dass die Zerkleinerung des durch die Versturzrinne abwärts transportierten Materials betrieblich zulässige Grenzen nicht überschreitet. Hierfür kann auf das umfangreiche Wissen zu Massenschwerebewegungen Rückgriff genommen werden. Dem Aspekt des Umweltschutzes, der sich in Bezug auf das Medium Luft auf den autochtonen Staub reduziert, kann durch Vorrichtungen zur Staubniederschlagung Rechnung getragen werden. Vertiefende Untersuchungen sind erforderlich, um die mit komplexen, aber erprobten Techniken arbeitende Tagebauindustrie auch in dicht besiedelten Regionen wieder an die Nutzung von Schwerkraft (-gestützten) Fördertechniken heranzuführen. Auch das Konzept – Geführte Versturztechnik – ist auf konkrete Anwendungsfälle hin in Details anzupassen.

Procedure e strumenti innovativi per lo sfruttamento sostenibile delle risorse minerarie

L'approvvigionamento di risorse minerali e la tutela dell'ambiente sono spesso considerate attività contrapposte ed inconciliabili, ma in realtà rappresentano due necessità imprescindibili per le società moderne. Le georisorse, in quanto non rinnovabili, devono essere valorizzate in maniera efficiente, adoperando strumenti che garantiscano la sostenibilità ambientale, sociale ed economica degli interventi estrattivi. La necessità di tutelare il territorio e migliorare la qualità della vita delle comunità locali impone alla Pubblica Amministrazione di implementare misure per la riqualificazione di aree degradate, ma fino ai primi anni '90 la normativa di settore non prevedeva strumenti a tal proposito, e ciò ha portato alla proliferazione di siti estrattivi dismessi e abbandonati senza interventi di recupero ambientale. Il presente lavoro di ricerca fornisce contributi innovativi alla pianificazione e progettazione sostenibile delle attività estrattive, attraverso l'adozione di un approccio multidisciplinare alla trattazione del tema e l'utilizzo esperto dei Sistemi Informativi Geografici, in particolare GRASS GIS. A seguito di una approfondita analisi in merito agli strumenti e le procedure adottate nella pianificazione delle Attività Estrattive in Italia, sono stati sviluppati un metodo di indagine ed un sistema esperto per la previsione ed il controllo delle vibrazioni indotte nel terreno da volate in cava a cielo aperto, che consentono di ottimizzare la progettazione della volata e del sistema di monitoraggio delle vibrazioni grazie a specifici strumenti operativi implementati in GRASS GIS. A supporto di una più efficace programmazione di interventi di riqualificazione territoriale, è stata messa a punto una procedura per la selezione di siti dismessi e di potenziali interventi di riqualificazione, che ottimizza le attività di pianificazione individuando interventi caratterizzati da elevata sostenibilità ambientale, economica e sociale. I risultati ottenuti dimostrano la necessità di un approccio esperto alla pianificazione ed alla progettazione delle attività estrattive, incrementandone la sostenibilità attraverso l'adozione di strumenti operativi più efficienti.

La tutela penale ambientale e la nozione di rifiuto fra istanze soprannazionali ed approdi nostrani

Fast and accurate numerical solutions in some problems of particle and radiation transport: synthetic acceleration for the method of short characteristics, Doppler-broadened scattering kernel, remote sensing of the cryosphere

The aim of this work is to present various aspects of numerical simulation of particle and radiation transport for industrial and environmental protection applications, to enable the analysis of complex physical processes in a fast, reliable, and efficient way. In the first part we deal with speed-up of numerical simulation of neutron transport for nuclear reactor core analysis. The convergence properties of the source iteration scheme of the Method of Characteristics applied to be heterogeneous structured geometries has been enhanced by means of Boundary Projection Acceleration, enabling the study of 2D and 3D geometries with transport theory without spatial homogenization. The computational performances have been verified with the C5G7 2D and 3D benchmarks, showing a sensible reduction of iterations and CPU time. The second part is devoted to the study of temperature-dependent elastic scattering of neutrons for heavy isotopes near to the thermal zone. A numerical computation of the Doppler convolution of the elastic scattering kernel based on the gas model is presented, for a general energy dependent cross section and scattering law in the center of mass system. The range of integration has been optimized employing a numerical cutoff, allowing a faster numerical evaluation of the convolution integral. Legendre moments of the transfer kernel are subsequently obtained by direct quadrature and a numerical analysis of the convergence is presented. In the third part we focus our attention to remote sensing applications of radiative transfer employed to investigate the Earth's cryosphere. The photon transport equation is applied to simulate reflectivity of glaciers varying the age of the layer of snow or ice, its thickness, the presence or not other underlying layers, the degree of dust included in the snow, creating a framework able to decipher spectral signals collected by orbiting detectors.

L'impatto ambientale delle operazioni di bonifica delle acque sotterranee

Il lavoro di tesi è stato svolto presso l’azienda Ecosurvey® - 3000 Srl, con sede a Bologna. Ecosurvey® fornisce servizi e consulenze nel campo della geologia e delle scienze ambientali e opera in diversi ambiti, tra cui le bonifiche del suolo, del sottosuolo e delle acque sotterranee. L’inquinamento del suolo e del sottosuolo è, infatti, il contesto dello studio di questa tesi. Tale inquinamento è persistente: con riferimento ai fenomeni di contaminazione, il sottosuolo registra la storia industriale di un sito. L’approccio che tenta di coniugare i bisogni dell’uomo nella società con il rispetto dell’ambiente è lo sviluppo sostenibile, ovvero, secondo la World Commission on Environment and Development, uno sviluppo che soddisfa i bisogni del presente senza compromettere la possibilità delle generazioni future di soddisfare i propri. Tra i molti ambiti in cui si applica il concetto di sostenibilità, è da ricordare quello delle bonifiche dei siti contaminati. A tal proposito, l’United States Environmental Protection Agency nel 2008 ha introdotto il concetto di “green remediation” come la pratica del considerare tutti gli effetti ambientali di un’azione di bonifica, includendo nel processo opzioni in grado di minimizzarne l’impronta ambientale. Nel 2013 la società Battelle, con i servizi tecnici ambientali di U.S. Navy, e U.S. Army Corps of Engineers ha sviluppato un applicativo denominato SiteWiseTM per la valutazione degli impatti ambientali associati alle tecnologie di bonifica delle acque sotterranee. Nell’ambito di questa tesi, in riferimento ad un intervento di bonifica presso un impianto di produzione di bitumi in attività, contaminato da idrocarburi, idrocarburi aromatici e composti organo-clorurati, con l’applicativo sono stati esaminati i principali indicatori dell’impronta ecologica (emissioni di gas serra, di ossidi di azoto, di zolfo e di polveri sottili; consumi di acqua, suolo ed energia) per tre diverse opzioni di bonifica, effettuandone poi il confronto.

Metallic copper as an antimicrobial surface

Bacteria, yeasts, and viruses are rapidly killed on metallic copper surfaces, and the term "contact killing" has been coined for this process. While the phenomenon was already known in ancient times, it is currently receiving renewed attention. This is due to the potential use of copper as an antibacterial material in health care settings. Contact killing was observed to take place at a rate of at least 7 to 8 logs per hour, and no live microorganisms were generally recovered from copper surfaces after prolonged incubation. The antimicrobial activity of copper and copper alloys is now well established, and copper has recently been registered at the U.S. Environmental Protection Agency as the first solid antimicrobial material. In several clinical studies, copper has been evaluated for use on touch surfaces, such as door handles, bathroom fixtures, or bed rails, in attempts to curb nosocomial infections. In connection to these new applications of copper, it is important to understand the mechanism of contact killing since it may bear on central issues, such as the possibility of the emergence and spread of resistant organisms, cleaning procedures, and questions of material and object engineering. Recent work has shed light on mechanistic aspects of contact killing. These findings will be reviewed here and juxtaposed with the toxicity mechanisms of ionic copper. The merit of copper as a hygienic material in hospitals and related settings will also be discussed.

Lake Ladoga: Water Resources for the Sustainable Development of North-Western Russia and Finland

The aim of this project was to evaluate the present state and possible changes of water resources in Lake Ladoga and its drainage basin for the purposes of the sustainable development of North-Western Russia and Finland. The group assessed the state of the water resources in quantitative and qualitative terms, taking the system of sustainable development indicators suggested by the International Commission on Sustainable Development as a basis for assessment. These include pressure indicators (annual withdrawals of ground and surface water, domestic consumption of water per capita), state indicators (ground water reserves, concentration of faecalcoliform in fresh water, biochemical oxygen demand), and response indicators (waste-water treatment coverage, density of hydrological networks). The group proposed the following additional indicators and indices for the complex evaluation of the qualitative and quantitative state of the region's water resources: * Pressure indicators (external load, coefficient of anthropogenic pressure) * State indicators and indices (concentrations of chemicals in water, concentrations of chemicals in sediments, index of water pollution, critical load, critical limit, internal load, load/critical load, concentration/critical limit, internal load/external load, trophic state, biotic indicators and indices) * Response indicators (discharges of pure water, polluted water, partly treated water and the ratio between these, trans-boundary fluxes of pollutants, state expenditure on environmental protection, human life span) The assessment considered both temporal and spatial aspects and produced a regional classification of the area according to the index of water pollution. Mathematical models were developed to describe and forecast the processes under way in the lake and can be used to estimate the influence of climatic changes on the hydrological regime, as well as the influence of anthropogenic load on the trophic state of Lake Ladoga and to assess the consequences of accidental discharges of polluting admixtures of different kinds into the lake. The results of this mathematical modelling may be of use to decision-makers responsible for the management of water resources.

Hydrogeochemical controls on uranium in aquifers of the Jacobsville Sandstone

The occurrence of elevated uranium (U) in sandstone aquifers was investigated in the Upper Peninsula of Michigan, focusing on aquifers of the Jacobsville Sandstone. The hydrogeochemical controls on groundwater U concentrations were characterized using a combination of water sampling and spectral gamma-ray logging of sandstone cliffs and residential water wells. 235U/238U isotope ratios were consistent with naturally occurring U. Approximately 25% of the 270 wells tested had U concentrations above the U.S. Environmental Protection Agency Maximum Contaminant Level (MCL) of 30 μg/L, with elevated U generally occurring in localized clusters. Water wells were logged to determine whether groundwater U anomalies could be explained by the heterogeneous distribution of U in the sandstone. Not all wells with relative U enrichment in the sandstone produced water with U above the MCL, indicating that the effect of U enrichment in the sandstone may be modified by other hydrogeochemical factors. Well water had high redox, indicating U is in its highly soluble (VI) valence. Equilibrium modeling indicated that aqueous U is complexed with carbonates. In general, wells with elevated U concentrations had low 235U/238U activity ratios. However, in some areas U concentrations and 235U/238U activity ratios were simultaneously high, possibly indicating differences in rock-water interactions. Limited groundwater age dating suggested that residence time may also help explain variations in well water U concentrations. Low levels of U enrichment (4 to 30 ppm) in the Jacobsville sandstone may make wells in its oxidized aquifers at risk for U concentrations above the MCL. On average, U concentrations were highest in heavy mineral and clay layers and rip up conglomerates. Uranium concentrations above 4 ppm also occurred in siltstones, sandstones and conglomerates. Uranium enrichment was likely controlled by deposition processes, sorption to clays, and groundwater flow, which was controlled by permeability variations in the sandstone. Low levels of U enrichment were found at deltaic, lacustrine and alluvial fan deposits and were not isolated to specific depositional environments.

Dynamic modeling of active regeneration in catalyzed and non-catalyzed diesel particulate filters

Particulate matter (PM) emissions standards set by the US Environmental Protection Agency (EPA) have become increasingly stringent over the years. The EPA regulation for PM in heavy duty diesel engines has been reduced to 0.01 g/bhp-hr for the year 2010. Heavy duty diesel engines make use of an aftertreatment filtration device, the Diesel Particulate Filter (DPF). DPFs are highly efficient in filtering PM (known as soot) and are an integral part of 2010 heavy duty diesel aftertreatment system. PM is accumulated in the DPF as the exhaust gas flows through it. This PM needs to be removed by oxidation periodically for the efficient functioning of the filter. This oxidation process is also known as regeneration. There are 2 types of regeneration processes, namely active regeneration (oxidation of PM by external means) and passive oxidation (oxidation of PM by internal means). Active regeneration occurs typically in high temperature regions, about 500 - 600 °C, which is much higher than normal diesel exhaust temperatures. Thus, the exhaust temperature has to be raised with the help of external devices like a Diesel Oxidation Catalyst (DOC) or a fuel burner. The O2 oxidizes PM producing CO2 as oxidation product. In passive oxidation, one way of regeneration is by the use of NO2. NO2 oxidizes the PM producing NO and CO2 as oxidation products. The passive oxidation process occurs at lower temperatures (200 - 400 °C) in comparison to the active regeneration temperatures. Generally, DPF substrate walls are washcoated with catalyst material to speed up the rate of PM oxidation. The catalyst washcoat is observed to increase the rate of PM oxidation. The goal of this research is to develop a simple mathematical model to simulate the PM depletion during the active regeneration process in a DPF (catalyzed and non-catalyzed). A simple, zero-dimensional kinetic model was developed in MATLAB. Experimental data required for calibration was obtained by active regeneration experiments performed on PM loaded mini DPFs in an automated flow reactor. The DPFs were loaded with PM from the exhaust of a commercial heavy duty diesel engine. The model was calibrated to the data obtained from active regeneration experiments. Numerical gradient based optimization techniques were used to estimate the kinetic parameters of the model.

Pathology working group review of histopathologic specimens from three laboratory studies of diclofenac in trout.

While the pathology peer review/pathology working group (PWG) model has long been used in mammalian toxicologic pathology to ensure the accuracy, consistency, and objectivity of histopathology data, application of this paradigm to ecotoxicological studies has thus far been limited. In the current project, the PWG approach was used to evaluate histopathologic sections of gills, liver, kidney, and/or intestines from three previously published studies of diclofenac in trout, among which there was substantial variation in the reported histopathologic findings. The main objectives of this review process were to investigate and potentially reconcile these interstudy differences, and based on the results, to establish an appropriate no observed effect concentration (NOEC). Following a complete examination of all histologic sections and original diagnoses by a single experienced fish pathologist (pathology peer review), a two-day PWG session was conducted to allow members of a four-person expert panel to determine the extent of treatment-related findings in each of the three trout studies. The PWG was performed according to the United States Environmental Protection Agency (US EPA) Pesticide Regulation (PR) 94-5 (EPA Pesticide Regulation, 1994). In accordance with standard procedures, the PWG review was conducted by the non-voting chairperson in a manner intended to minimize bias, and thus during the evaluation, the four voting panelists were unaware of the treatment group status of individual fish and the original diagnoses associated with the histologic sections. Based on the results of this review, findings related to diclofenac exposure included minimal to slightly increased thickening of the gill filament tips in fish exposed to the highest concentration tested (1,000 μg/L), plus a previously undiagnosed finding, decreased hepatic glycogen, which also occurred at the 1,000 μg/L dose level. The panel found little evidence to support other reported effects of diclofenac in trout, and thus the overall NOEC was determined to be >320 μg/L. By consensus, the PWG panel was able to identify diagnostic inconsistencies among and within the three prior studies; therefore this exercise demonstrated the value of the pathology peer review/PWG approach for assessing the reliability of histopathology results that may be used by regulatory agencies for risk assessment.

A discourse-theoretic approach to negotiated rulemaking

In 1996 and in 1997, Congress ordered the Secretary of Health and Human Services to undertake a process of negotiated rulemaking, which is authorized under the Negotiated Rulemaking Act of 1990, on three separate rulemaking matters. Other Federal agencies, including the Environmental Protection Agency and the Occupational Health and Safety Administration, have also made use of this procedure. As part of the program to reinvent government, President Clinton has issued an executive order requiring federal agencies to engage in some negotiated rulemaking procedures. I present an analytic, interpretative and critical approach to looking at the statutory and regulatory provisions for negotiated rulemaking as related to issues of democratic governance surrounding the problem of delegation of legislative power. The paradigm of law delineated by Jürgen Habermas, which sets law the task of achieving social or value integration as well as integration of systems, provides the background theory for a critique of such processes. My research questions are two. First, why should a citizen obey a regulation which is the result of negotiation by directly interested parties? Second, what is the potential effect of negotiated rulemaking on other institutions for deliberative democracy? For the internal critique I argue that the procedures for negotiated rulemaking will not produce among the participants the agreement and cooperation which is the legislative intent. For the external critique I argue that negotiated rulemaking will not result in democratically-legitimated regulation. In addition, the practice of negotiated rulemaking will further weaken the functioning of the public sphere, as Habermas theorizes it, as the central institution of deliberative democracy. The primary implication is the need to mitigate further development of administrative agencies as isolated, self-regulating systems, which have been loosened from the controls of democratic governance, through the development of a robust public sphere in which affected persons may achieve mutual understanding. ^

Watershed classification in the Lower Mekong Basin: Rapid economic growth - a source of increasing potential for conflict over resource use

In the Lower Mekon Basin the extraordinary pace of economic development and growth contradicts with environmental protection. On base of the Watershed Classification Project (WSCP) and the inclusion of a DTM for the entire LMB the potential degradation risk was derived for each land unit. The risks were grouped into five classes, where classes one and two are considered critical with regard to soil erosion when the land is cleared of natural resources. For practical use the database has an enormous potential for further spatial analysis in combination with other datasets, as for example the NCCR North-South uses the WSCP within two research projects.

Future water quality monitoring--adapting tools to deal with mixtures of pollutants in water resource management.

Environmental quality monitoring of water resources is challenged with providing the basis for safeguarding the environment against adverse biological effects of anthropogenic chemical contamination from diffuse and point sources. While current regulatory efforts focus on monitoring and assessing a few legacy chemicals, many more anthropogenic chemicals can be detected simultaneously in our aquatic resources. However, exposure to chemical mixtures does not necessarily translate into adverse biological effects nor clearly shows whether mitigation measures are needed. Thus, the question which mixtures are present and which have associated combined effects becomes central for defining adequate monitoring and assessment strategies. Here we describe the vision of the international, EU-funded project SOLUTIONS, where three routes are explored to link the occurrence of chemical mixtures at specific sites to the assessment of adverse biological combination effects. First of all, multi-residue target and non-target screening techniques covering a broader range of anticipated chemicals co-occurring in the environment are being developed. By improving sensitivity and detection limits for known bioactive compounds of concern, new analytical chemistry data for multiple components can be obtained and used to characterise priority mixtures. This information on chemical occurrence will be used to predict mixture toxicity and to derive combined effect estimates suitable for advancing environmental quality standards. Secondly, bioanalytical tools will be explored to provide aggregate bioactivity measures integrating all components that produce common (adverse) outcomes even for mixtures of varying compositions. The ambition is to provide comprehensive arrays of effect-based tools and trait-based field observations that link multiple chemical exposures to various environmental protection goals more directly and to provide improved in situ observations for impact assessment of mixtures. Thirdly, effect-directed analysis (EDA) will be applied to identify major drivers of mixture toxicity. Refinements of EDA include the use of statistical approaches with monitoring information for guidance of experimental EDA studies. These three approaches will be explored using case studies at the Danube and Rhine river basins as well as rivers of the Iberian Peninsula. The synthesis of findings will be organised to provide guidance for future solution-oriented environmental monitoring and explore more systematic ways to assess mixture exposures and combination effects in future water quality monitoring.

A Study of Radon in Air and Water in Maine Schools

The transfer coefficient of radon from water to air was investigated in schools. Kitchens, bathrooms and locker rooms were studied for seven schools in Maine. Simulations were done in water-use rooms where radon in air detectors were in place. Quantities measured were radon in water (270-24500 F) and air (0-80 q), volume of water used, emissivities (0.01-0.99) and ventilation rates (0.012-0.066A). Variation throughout the room of the radon concentration was found. Values calculated for the transfer coefficient for kitchens and baths were ranged from 9.6 x to 2.0 x The transfer coefficient was calculated using these parameters and was also measured using concentrations of radon in water and air. This provides a means by which radon in air can be estimated using the transfer coefficient and the concentration in the water in other schools and it can be used to estimate the dose caused by radon released from water use. This project was partially funded by the United States Environmental Protection Agency (grant #X828l2 101-0) and by the State of Maine (grant #10A500178). These are the first measurements of this type to be done in schools in the United States.

Coastal Survey Maps: From Historical Documents to Digital Databases

This paper describes the spatial data handling procedures used to create a vector database of the Connecticut shoreline from Coastal Survey Maps. The appendix contains detailed information on how the procedures were implemented using Geographic Transformer Software 5 and ArcGIS 8.3. The project was a joint project of the Connecticut Department of Environmental Protection and the University of Connecticut Center for Geographic Information and Analysis.