SPHERE: Stormont Parliamentary Hansards: Embedded in Research and Education

SPHERE (Stormont Parliamentary Hansards: Embedded in Research and Education) was a JISC-funded project based at King’s College, London and Queen’s University, Belfast, working in Partnership with the Northern Ireland Assembly Library, and the NIA Official Report (Hansard). Its purpose was to assess the use, value and impact of The Stormont Papers digital resource, and to use the results of this assessment to make recommendations for a series of practical approaches to embed the resource within teaching, learning and research among the wider user community. The project began in November 2010 and was concluded in April 2010.

A series of formal reports on the project are published by JISC online at http://www.jisc.ac.uk/whatwedo/programmes/digitisation/impactembedding/sphere.aspx

SPHERE Impact analysis summary
Portable Document Format
SPHERE interviews report
SPHERE Outreach use case
SPHERE research use case
SPHERE teaching use_case
SPHERE web survey report
SPHERE web analysis

Calculation of Critical Clearing Time of Embedded Generation for Relay Setting Based on Optimisation Method

his paper proposes an optimisation-based method to calculate the critical slip (speed) of dynamic stability and critical clearing time (CCT) of a self-excited induction generator (SEIG). A simple case study using the Matlab/Simulink environment has been included to exemplify the optimisation method. Relationships between terminal voltage, critical slip and reactance of transmission line, CCT and inertial constant have been determined, based on which analysis of impact on relaying setting has been further conducted for another simulation case.

Pull-out behaviour of steel grid soil reinforcement embedded in silty sand

This paper investigates the pull-out behaviour (particularly the bearing resistance) of a steel grid reinforcement embedded in silty sand using laboratory tests and numerical analyses. It is demonstrated that the various common analytical equations for calculating the bearing component of pull-out resistance give a wide range of calculated values, up to about 200% disparity. The disparity will increase further if the issue of whether to use the peak or critical state friction angle is brought in. Furthermore, these equations suggest that the bearing resistance factor, N, is only a function of soil friction angle which is not consistent with some design guidelines. In this investigation, a series of large scale laboratory pull-out tests under different test pressures were conducted. The test results unambiguously confirmed that the N factor is a function of test pressure. A modified equation for calculating N is also proposed. To have more in-depth understanding of the pull-out behaviour, the tests were modelled numerically. The input parameters for the numerical analysis were obtained from laboratory triaxial tests. The analysis results were compared with the experimental results. Good agreement between experimental and numerical results was achieved if the strain-softening behaviour from peak strength to critical state condition was captured by the soil model used. © 2013 Elsevier Ltd.

Microstrcutural evolution of SiC fibre embedded AA6061 matrix induced by ultrasonic consolidation

Ultrasonic consolidation (UC) uses high frequency (20-40KHz) mechanical vibrations to produce a solid-state metallurgical bond (weld) between metal foils. UC as a novel layered manufacturing technique is used in this research to embed reinforcing members such as silicon carbide fibers into the aluminium alloy 6061's matrices. It is known that UC induce volume and surface effect in the material it is acting on. Both effects are employed in embedding active/passive elements in the metal matrix. Whilst the process and the two effects are used and identified at macro level, what is happening at micro level is unknown and hardly studied. In this research we are investigating the phenomena occurring in the microstructure of the parts during UC process to obtain better understanding about how and why the process works. In this research, high-resolution electron backscatter diffraction is used to study the effects of the UC process on the evolution of microstructure in AA6061 with and without fibre elements. The inverse pole figures (IPF), pole figures (PF) and the correlated misorientation angle distribution of the mentioned samples are obtained. The characteristics of the crystallographic orientation, the grain structure and the grain boundary are analysed to find the effect of ultrasonic vibration and embedding fibre on the microstructure and texture of the bond. The ultrasonic vibration will lead to exceptional refinement of grains to a micron level along the bond area and affect the crystallographic orientation. Additional plastic flow occurs around the fibre which leads to the fibre embedding. © 2008 Materials Research Society.

Teachers’ Perspectives on Moving Image as a digital literacy tool in Creative Classrooms

Eight Creative Classroom (CCR) elements are used as a framework for analysing teachers’ current attitudes towards the use of moving images as a tool for teaching digital literacy to pupils aged 11-18 years in the context of ‘Creative Classrooms’. This paper reports on the challenges being faced by innovative teachers willing to adopt moving image (as a new ICT) into their teaching, and highlights the gaps currently present in the systemic support structures in schools which need to be addressed for innovative pedagogical practices to occur in these Creative Classrooms. By ensuring educators learn from their experiences of poor ICT uptake in the past and utilise these lessons for future innovations in classrooms, it is hoped that the transition to moving image, and its associated digital literacy skills, will be smooth and beneficial to the learners.

Public Service Broadcasting, Creative Industries and Innovation Infrastructure: The Case of ABC's Pool

The proliferation of media services enabled by digital technologies poses a serious challenge to public service broadcasting rationales based on media scarcity. Looking to the past and future, we articulate an important role that the Australian Broadcasting Corporation (ABC) might play in the digital age. We argue that historically the ABC has acted beyond its institutional broadcasting remit to facilitate cultural development and, drawing on the example of Pool (an online community of creative practitioners established and maintained by the ABC), point to a key role it might play in fostering network innovation in what are now conceptualised as the creative industries.

Weaving behavior into feature models for embedded system families

Product Line software Engineering depends on capturing the commonality and variability within a family of products, typically using feature modeling, and using this information to evolve a generic reference architecture for the family. For embedded systems, possible variability in hardware and operating system platforms is an added complication. The design process can be facilitated by first exploring the behavior associated with features. In this paper we outline a bidirectional feature modeling scheme that supports the capture of commonality and variability in the platform environment as well as within the required software. Additionally, 'behavior' associated with features can be included in the overall model. This is achieved by integrating the UCM path notation in a way that exploits UCM's static and dynamic stubs to capture behavioral variability and link it to the feature model structure. The resulting model is a richer source of information to support the architecture development process.

An optimized stereo vision implementation for embedded systems: application to RGB and Infra-Red images

The aim of this paper is to demonstrate the applicability and the effectiveness of a computationally demanding stereo matching algorithm in different lowcost and low-complexity embedded devices, by focusing on the analysis of timing and image quality performances. Various optimizations have been implemented to allow its deployment on specific hardware architectures while decreasing memory and processing time requirements: (1) reduction of color channel information and resolution for input images, (2) low-level software optimizations such as parallel computation, replacement of function calls or loop unrolling, (3) reduction of redundant data structures and internal data representation. The feasibility of a stereovision system on a low cost platform is evaluated by using standard datasets and images taken from Infra-Red (IR) cameras. Analysis of the resulting disparity map accuracy with respect to a full-size dataset is performed as well as the testing of suboptimal solutions

Proportionality in Age Discrimination Cases - a Model Suitable for Socially Embedded Rights

This chapter discusses the use of proportionality in age discrimination cases before the Court of Justice of the European Union. It argues that the Court does not use this concept systematically - indeed it exposes some contradiction that make the case law seem arbitrary - and proposes a more fruitful use of the principle, which is in line with a modern conception of human rights. The chapter argues that the principle of proportionality stems from the time when human rights served the recently liberated burgeois elite in guarding their rights to property and liberty against the state. Today, states not only respect human rights (which is fully sufficient for this elite, who can rely on their inherited wealth to fend for themselves). They also protect and promote human rights, and these activities are a precondition for human rights to be practically relevant for the whole population. This also means that state activity, which is experienced as a limitation of rights to property and liberty by some, may constitute a measure to promote and protect human rights of others. In employment law - the only field where the EU ban on age discrimination is applied - this is a typical situation. If such a situation occurs, the principle of proportionality must be applied in a bifurcated way.It is not sufficient that the limitation of property rights is proportionate for the achievement of a public policy aim. If the aim of public policy is to enable the effective use of human rights, the limitation of the state action must be proportionate to the protection and promotion of those human rights. It is argued that the principle of proportionality is superior to less structures balancing acts (e.g. the Wednesbury principle), if it is applied both ways. Going over to the field of age discrimination, the chapter identifies a number of potentially colliding aims pursued in this field. Banning age discrimination may relate to genuine aims of anti-discrimination law if bias against older or very young workers is addressed. However, the EU ban of discrimination against all ages also serves to restructure employment law and policy to the age of flexibilisation, replacing the synchronisation principle that has been predominant for the welfare states of the 20th century. The former aim is related to human rights protection, while the latter aim is not (at least not always). This has consequences for applying the proportionality test. The chapter proposes different ways to argue the most difficult age discrimination cases, where anti-discrimination rationales and flexibilisation rationales clash

Cultivating creative learners in higher education: Engaging students in anatomy through art

Introduction
Nursing and midwifery students often struggle to engage with bioscience modules because they lack confidence in their ability to study science (Fell et al., 2012). Consequently many have difficulty applying anatomical and physiological information, essential to providing safe and effective patient care (Rogers, 2014; Rogers and Sterling, 2012); therefore a need exists for nurse educators to explore different methods of delivery of these important topics to enhance current curricula (Johnston, 2010). Inspired by the reported success of creative methods to enhance the teaching and learning of anatomy in medical education (Noel, 2013; Finn and McLachlan, 2010), this pilot study engaged nursing students in anatomy through the art of felt. The project was underpinned by the principles of good practice in undergraduate education, staff-student engagement, cooperation among students, active learning, prompt feedback, time on task, high expectations and respect for diverse learning styles (Chickering and Gamson, 1987).

Method
Undergraduate student nurses from Queen’s University, Belfast, enrolled in the year one ‘Health and Wellbeing’ model were invited to participate in the project. Over a six week period the student volunteers worked in partnership with teaching staff to construct individual, unique, three dimensional felt models of the upper body. Students researched the agreed topic for each week in terms of anatomical structure, location, tissue composition and vascular access. Creativity was encouraged in relation to the colour and texture of materials used. The evaluation of the project was based on the four level model detailed by Kirkpatrick and Kirkpatrick (2006) and included both quantitative and qualitative analysis:• pre and post knowledge scores• self-rated confidence• student reflections on the application of learning to practice.

Results
At the end of the project students had created felt pieces reflective of their learning throughout the project and ‘memorable’ three dimensional mental maps of the human anatomy. Evaluation revealed not only acquisition of anatomical knowledge, but the wider benefits of actively engaging in creative learning with other students and faculty teaching staff.

The project has enabled nurse educators to assess the impact of innovative methods for delivery of these important topics.

Influence of embedded length on strength of BFRP rods bonded parallel to the grain in low grade timber by pullout-bending tests

Bonded-in rod connections in timber possess many desirable attributes in terms of efficiency, manufacture, performance, aesthetics and cost. In recent years research has been conducted on such connections using fibre reinforced polymers (FRPs) as an alternative to steel. This research programme investigates the pull-out capacity of Basalt FRP rods bonded-in in low grade Irish Sitka Spruce. Embedded length is thought to be the most influential variable contributing to pull- out capacity of bonded-in rods after rod diameter. Previous work has established an optimum embedded length of 15 times the hole diameter. However, this work only considered the effects of axial stress on the bond using a pull-compression testing system which may have given an artificially high pull out capacity as bending effects were neglected. A hinge system was utilised that allows the effects of bending force to be taken in to consideration along with axial forces in a pull-out test. This paper describes an experimental programme where such pull-bending tests were carried out on samples constructed of 12mm diameter BFRP bars with a 2mm glueline thickness and embedded lengths between 80mm and 280mm bonded-in to low-grade timber with an epoxy resin. Nine repetitions of each were tested. A clear increase in pull-out strength was found with increasing embedded length.