Neural mechanisms underlying perilesional transcranial direct current stimulation in aphasia: A feasibility study

Little is known about the neural mechanisms by which transcranial direct current stimulation (tDCS) impacts on language processing in post-stroke aphasia. This was addressed in a proof-of-principle study that explored the effects of tDCS application in aphasia during simultaneous functional magnetic resonance imaging (fMRI). We employed a single subject, cross-over, sham-tDCS controlled design, and the stimulation was administered to an individualized perilesional stimulation site that was identified by a baseline fMRI scan and a picture naming task. Peak activity during the baseline scan was located in the spared left inferior frontal gyrus and this area was stimulated during a subsequent cross-over phase. tDCS was successfully administered to the target region and anodal- vs. sham-tDCS resulted in selectively increased activity at the stimulation site. Our results thus demonstrate that it is feasible to precisely target an individualized stimulation site in aphasia patients during simultaneous fMRI, which allows assessing the neural mechanisms underlying tDCS application. The functional imaging results of this case report highlight one possible mechanism that may have contributed to beneficial behavioral stimulation effects in previous clinical tDCS trials in aphasia. In the future, this approach will allow identifying distinct patterns of stimulation effects on neural processing in larger cohorts of patients. This may ultimately yield information about the variability of tDCS effects on brain functions in aphasia.

Relationship between quality certification and financial and non-financial performance of organizations

At present, many countries have either embraced ISO9001 or used it as the basis of their national quality certification systems. However, few studies have been conducted to examine the benefits companies’ gain from achieving and implementing ISO9001 standards (Chikuku et al. 2012; Psomas et al. 2013; Sampaio et al. 2011a,b). Analysis has brought much more confused and uneven results across the countries. Turning to the experience of Malaysia, this country has witnessed a spectacular growth at an average rate of 9.89% per annum of ISO certificates issued to companies operating within its borders (ISO Survey 2012). While many companies rush to be ISO 9001 certified whether this brings about better benefits (both the financial and the non-financial) is still an open question. In this study, the research problems were first formulated from the literature and then a questionnaire survey was conducted to test the hypotheses. A survey was administered to chief executives officers and managers across manufacturing and service organizations in Malaysia. Multivariate analysis and SPSS macro developed by Preacher and Hayes were used as statistical techniques to the financial and non-financial benefits of ISO9001 certification. The survey instrument was a two-page questionnaire comprising three sections. The first section of the questionnaire covered the company’s profile. The second section consisted of 25 items on internal benefits and third section consisted of 7 items on external benefits measured on 1–5 Likert scale to assess the benefits of ISO9001 certification. Total 201 valid responses were received. Results of the study indicate that there was no significant direct relationship between ISO9001 certification and organizational financial performance, while strong statistical evidence was found to support the direct relationship between ISO9001 certification and non-financial performance. The findings of the study discovered that financial performance is actually directly related to two non-financial measures, namely quality performance and local and international business performance, which are directly and significantly influenced by ISO9001 certification. Therefore non-financial performance measures are involved in the mediational process. The findings will assist practitioners in taking right courses of action that make the implementation of this standard more effective. For example, the study findings study suggests that companies should put emphasize on nonfinancial factors to improve their financial performance.

Direct bone marrow HSC transplantation enhances local engraftment at the expense of systemic engraftment in NSG mice

Direct bone marrow (BM) injection has been proposed as a strategy to bypass homing inefficiencies associated with intravenous (IV) hematopoietic stem cell (HSC) transplantation. Despite physical delivery into the BM cavity, many donor cells are rapidly redistributed by vascular perfusion, perhaps compromising efficacy. Anchoring donor cells to 3-dimensional (3D) multicellular spheroids, formed from mesenchymal stem/stromal cells (MSC) might improve direct BM transplantation. To test this hypothesis, relevant combinations of human umbilical cord blood-derived CD34(+) cells and BM-derived MSC were transplanted into NOD/SCID gamma (NSG) mice using either IV or intrafemoral (IF) routes. IF transplantation resulted in higher human CD45(+) and CD34(+) cell engraftment within injected femurs relative to distal femurs regardless of cell combination, but did not improve overall CD45(+) engraftment at 8 weeks. Analysis within individual mice revealed that despite engraftment reaching near saturation within the injected femur, engraftment at distal hematopoietic sites including peripheral blood, spleen and non-injected femur, could be poor. Our data suggest that the retention of human HSC within the BM following direct BM injection enhances local chimerism at the expense of systemic chimerism in this xenogeneic model.

Open-access more harm than good in developing world

The traditional 'publish for free and pay to read' business model adopted by publishers of academic journals can lead to disparity in access to scholarly literature, exacerbated by rising journal costs and shrinking library budgets. However, although the 'pay to publish and read for free' business model of open-access publishing has helped to create a level playing field for readers, it does more harm than good in the developing world.

Developing and testing readability measurements for second language learners

This research constructed a readability measurement for French speakers who view English as a second language. It identified the true cognates, which are the similar words from these two languages, as an indicator of the difficulty of an English text for French people. A multilingual lexical resource is used to detect true cognates in text, and Statistical Language Modelling to predict the predict the readability level. The proposed enhanced statistical language model is making a step in the right direction by improving the accuracy of readability predictions for French speakers by up to 10% compared to state of the art approaches. The outcome of this study could accelerate the learning process for French speakers who are studying English. More importantly, this study also benefits the readability estimation research community, presenting an approach and evaluation at sentence level as well as innovating with the use of cognates as a new text feature.

Water management capacity building to support rapidly developing mining economies

Many developing countries are experiencing rapid expansion in mining with associated water impacts. In most cases mining expansion is outpacing the building of national capacity to ensure that sustainable water management practices are implemented. Since 2011, Australia's International Mining for Development Centre (IM4DC) has funded capacity building in such countries including a program of water projects. Five projects in particular (principally covering experiences from Peru, Colombia, Ghana, Zambia, Indonesia, Philippines and Mongolia) have provided insight into water capacity building priorities and opportunities. This paper reviews the challenges faced by water stakeholders, and proposes the associated capacity needs. The paper uses the evidence derived from the IM4DC projects to develop a set of specific capacity-building recommendations. Recommendations include: the incorporation of mine water management in engineering and environmental undergraduate courses; secondments of staff to suitable partner organisations; training to allow site staff to effectively monitor water including community impacts; leadership training to support a water stewardship culture; training of officials to support implementation of catchment management approaches; and the empowerment of communities to recognise and negotiate solutions to mine-related risks. New initiatives to fund the transfer of multi-disciplinary knowledge from nations with well-developed water management practices are called for.

An alkaline direct borohydride fuel cell with hydrogen peroxide as oxidant

A novel alkaline direct borohydride fuel cell (ADBFC) using varying concentrations of hydrogen peroxide as oxidant and sodium borohydride with sodium hydroxide, each of differing concentration, as fuel is reported. A peak power density of ca. 150 in W cm(-2) at a cell voltage of 540 mV can be achieved from the optimized ADBFC operating at 70 degrees C. (c) 2004 Elsevier B.V. All rights reserved.

Unraveling the packing pattern leading to gelation using SS NMR and X-ray diffraction: direct observation of the evolution of self-assembled fibers

A detailed understanding of the mode of packing patterns that leads to the gelation of low molecular mass gelators derived from bile acid esters was carried out using solid state NMR along with complementary techniques such as powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and polarizing optical microscopy (POM). Solid state C-13{H-1} cross polarization (CP) magic angle spinning (MAS) NMR of the low molecularmass gel in its native state was recorded for the first time. A close resemblance in the packing patterns of the gel, xerogel and bulk solid states was revealed upon comparing their C-13{H-1} CPMAS NMR spectral pattern. A doublet resonance pattern of C-13 signals in C-13{H-1}CPMAS NMR spectra were observed for the gelator molecules, whereas the non-gelators showed simple singlet resonance or resulted inthe formation of inclusion complexes/solvates. PXRD patterns revealed a close isomorphous nature of the gelators indicating the similarity in the mode of the packing pattern in their solid state. Direct imaging of the evolution of nanofibers (sol-gel transition) was carried out using POM, which proved the presence of self-assembled fibrillar networks (SAFINs) in the gel. Finally powder X-ray structure determination revealed the presence of two non-equivalent molecules in an asymmetric unit which is responsible for the doublet resonance pattern in the solid state NMR spectra.

Social Responsibility in Developing New Biotechnology : Interpretations of Responsibility in the Governance of Finnish Biotechnology

The object of the dissertation is to analyse the concept of social responsibility in relation to research and development of new biotechnology. This is done by examining the relevant actors – researchers, administrators, decision-makers, experts, industry, and the public – involved in the Finnish governance of biotechnology through their roles and responsibilities. Existing practises of responsibility in biotechnology governance, as well as the discourses of responsibility – the actors’ conceptions of their own and others responsibilities – are analysed. Three types of responsibility that the actors have assumed are formulated, and the implications of these conceptions to the governance of new biotechnology are analysed. From these different types of responsibility adopted and used by the actors, theoretical models called responsibility chains are constructed. The notion of responsibility is under-theorised in sociology and this research is an attempt to create a mid-range theory of responsibility in the context of biotechnology governance. The research aims to increase understanding of the governance system from a holistic viewpoint by contributing to academic debates on science and technology policy, public understanding of science, commercialisation of research, and corporate social responsibility. With a thorough analysis of the concept of responsibility that is derived from empirical data, the research brings new perspectives into these debates by challenging many normative ideas embedded in discourses. For example, multiple roles of the public are analysed to highlight the problems of consumerism and citizen participation in practise, as well as in relation to different policy strategies. The research examines also the contradictory responsibilities faced by biotechnology researchers, who balance between academic autonomy, commercialisation of research, and reflecting social consequences of their work. Industries responsibilities are also examined from the viewpoint of biotechnology. The research methodology addresses the contradictions between empirical findings, theories of biotechnology governance, and policies in a novel way, as the study concentrates on several actors and investigates both the discourses and the practises of the actors. Thus, the qualitative method of analysis is a combination of discourse and content analysis. The empirical material is comprised of 29 personal interviews as well as documents by Finnish and multinational organizations on biotechnology governance.

Developing the helping relationship: Engaging with clients in different contexts

"Human service workers need more than just common sense. This book offers a comprehensive introduction to practice skills required across the human service sector. The authors use critical analysis to systematically outline the key stages of interaction with clients."--Libraries Australia "A thorough introduction to the core practice skills needed by social work and welfare professionals. Human service workers need more than just common sense. Practice Skills in Social Work and Welfare offers a comprehensive introduction to practice skills required across the human service sector. The authors use critical analysis to systematically outline the key stages of interaction with clients: engagement, assessment, intervention and evaluation. Drawing on a strengths approach, they examine the skills needed for working with different types of clients: individuals, families and community groups. They also explore the dilemmas faced in daily practice, including the challenges of working with involuntary clients, clients from different cultural backgrounds, and clients in crisis situations. Practice Skills in Social Work and Welfare provides a model of integrated practice which incorporates the key components of ideology, theory, phase, skill and context. Detailed case studies demonstrate how welfare services can be delivered in different contexts. Written by experienced teachers and practitioners from Australia and New Zealand, Practice Skills in Social Work and Welfare is a practical and user friendly text for students and reference for practitioners"--Publisher website

Direct and Inverse Scattering for Beltrami Fields

We consider an obstacle scattering problem for linear Beltrami fields. A vector field is a linear Beltrami field if the curl of the field is a constant times itself. We study the obstacles that are of Neumann type, that is, the normal component of the total field vanishes on the boundary of the obstacle. We prove the unique solvability for the corresponding exterior boundary value problem, in other words, the direct obstacle scattering model. For the inverse obstacle scattering problem, we deduce the formulas that are needed to apply the singular sources method. The numerical examples are computed for the direct scattering problem and for the inverse scattering problem.

Developing the helping relationship: Engaging with clients in different contexts

"Fully revised edition of this widely used introduction to the core practice skills needed by social work and other human service professionals. 'The main strength of the book is the consistency of its themes throughout the text.I would like to commend the editors of this book for the contribution it should make to practice teaching with social work and welfare' - Karen Heycox in Australian Social Work Human service workers need more than just common sense. Practice Skills in Social Work and Welfare offers a comprehensive introduction to practice skills required across the human service sector. The authors use critical analysis to systematically outline the key stages of interaction with clients: engagement, assessment, intervention and evaluation. Drawing on a strengths approach, they examine the skills needed for working with different types of clients: individuals, families and community groups. They also explore the dilemmas faced in daily practice, including the challenges of working with involuntary clients, clients from different cultural backgrounds, and clients in crisis situations. Practice Skills in Social Work and Welfare provides a model of integrated practice which incorporates the key components of ideology, theory, phase, skill and context. Detailed case studies demonstrate how welfare services can be delivered in different contexts. This second edition has been thoroughly revised and updated and includes new material on online services and strengths-based practice. Written by experienced teachers and practitioners from Australia and New Zealand, Practice Skills in Social Work and Welfare is a practical and user friendly text for students and reference for practitioners."--Publisher website

Direct torque control schemes for split-phase induction machine

In this paper, direct torque control (DTC) algorithms for a split-phase induction machine (SPIM) are established. An SPIM has two sets of three-phase stator windings, with a shift of thirty electrical degrees between them. The significant contributions of this paper are: 1) two new methods of DTC technique for an SPIM are developed, called Resultant Flux Control Method and Individual Flux Control Method and 2) advantages and disadvantages of both methods are discussed. High torque ripple is a disadvantage for three-phase DTC. It is found that torque ripple in an SPIM can be significantly reduced without increasing the switching frequency.