Biodiversity and quantification of functional bacteria in deammonification process.

2015

Development of suberin films driven by an ionic liquid-based depolymerisation process

Dissertation presented to obtain the Ph.D degree in Chemistry

Quality of process modeling using BPMN: a model-driven approach

Dissertação para obtenção do Grau de Doutor em Engenharia Informática

Development of a "green process" for the isolation of natural functional extracts with anti-cancer activity - Application of high-pressure technology

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Electrodialytic remediation of two types of air pollution control residues and their applicability in construction materials

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente Perfil de Engenharia de Sistemas Ambientais

Evaluation of a commercial test based on ligase chain reaction for direct detection of Mycobacterium tuberculosis in respiratory specimens

A ligase chain reaction DNA amplification method for direct detection of Mycobacterium tuberculosis (Abbott LCx MTB) in respiratory specimens was evaluated. Results from LCx MTB Assay were compared with those from acid fast bacilli smear, culture, and final clinical diagnosis for each patient. A total of 297 respiratory specimens (sputum and bronchial lavage) from 193 patients were tested. The sensitivity, specificity, positive predictive value and negative predictive value of LCx vs culture were 92.7%, 93%, 67.8% and 98.7%, respectively. When compared to the clinical final diagnosis, the sensitivity, specificity, PPV and NPV for LCx were 88.9%, 96.8%, 86.5% and 97.4%, respectively. The sensitivity of LCx MTB assay was 75% for smear-negative, culture positive samples. The results indicate that LCx MTB assay is a rapid, simple and valuable technique as a complementary tool for the diagnosis of tuberculosis.

Service-oriented infrastructure to support the control, monitoring and management of a shop floor system

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Fractionation of hydro-ethanolic extracts from grape pomace through membrane processing: the effect of membrane and extracting media on process performance

The EM3E Master is an Education Programme supported by the European Commission, the European Membrane Society (EMS), the European Membrane House (EMH), and a large international network of industrial companies, research centers and universities

Predictive analytical and numerical modeling for orthogonal cutting

In this thesis, a predictive analytical and numerical modeling approach for the orthogonal cutting process is proposed to calculate temperature distributions and subsequently, forces and stress distributions. The models proposed include a constitutive model for the material being cut based on the work of Weber, a model for the shear plane based on Merchants model, a model describing the contribution of friction based on Zorev’s approach, a model for the effect of wear on the tool based on the work of Waldorf, and a thermal model based on the works of Komanduri and Hou, with a fraction heat partition for a non-uniform distribution of the heat in the interfaces, but extended to encompass a set of contributions to the global temperature rise of chip, tool and work piece. The models proposed in this work, try to avoid from experimental based values or expressions, and simplifying assumptions or suppositions, as much as possible. On a thermo-physical point of view, the results were affected not only by the mechanical or cutting parameters chosen, but also by their coupling effects, instead of the simplifying way of modeling which is to contemplate only the direct effect of the variation of a parameter. The implementation of these models was performed using the MATLAB environment. Since it was possible to find in the literature all the parameters for AISI 1045 and AISI O2, these materials were used to run the simulations in order to avoid arbitrary assumption.

Res Publica: Citizenship and Political Representation in Portugal, 1820-1926

The term res publica (literally “thing of the people”) was coined by the Romans to translate the Greek word politeia, which, as we know, referred to a political community organised in accordance with certain principles, amongst which the notion of the “good life” (as against exclusively private interests) was paramount. This ideal also came to be known as political virtue. To achieve it, it was necessary to combine the best of each “constitutional” type and avoid their worst aspects (tyranny, oligarchy and ochlocracy). Hence, the term acquired from the Greeks a sense of being a “mixed” and “balanced” system. Anyone that was entitled to citizenship could participate in the governance of the “public thing”. This implied the institutionalization of open debate and confrontation between interested parties as a way of achieving the consensus necessary to ensure that man the political animal, who fought with words and reason, prevailed over his “natural” counterpart. These premises lie at the heart of the project which is now being presented under the title of Res Publica: Citizenship and Political Representation in Portugal, 1820-1926. The fact that it is integrated into the centenary commemorations of the establishment of the Republic in Portugal is significant, as it was the idea of revolution – with its promise of rupture and change – that inspired it. However, it has also sought to explore events that could be considered the precursor of democratization in the history of Portugal, namely the vintista, setembrista and patuleia revolutions. It is true that the republican regime was opposed to the monarchic. However, although the thesis that monarchy would inevitably lead to tyranny had held sway for centuries, it had also been long believed that the monarchic system could be as “politically virtuous” as a republic (in the strict sense of the word) provided that power was not concentrated in the hands of a single individual. Moreover, various historical experiments had shown that republics could also degenerate into Caesarism and different kinds of despotism. Thus, when absolutism began to be overturned in continental Europe in the name of the natural rights of man and the new social pact theories, initiating the difficult process of (written) constitutionalization, the monarchic principle began to be qualified as a “monarchy hedged by republican institutions”, a situation in which not even the king was exempt from isonomy. This context justifies the time frame chosen here, as it captures the various changes and continuities that run through it. Having rejected the imperative mandate and the reinstatement of the model of corporative representation (which did not mean that, in new contexts, this might not be revived, or that the second chamber established by the Constitutional Charter of 1826 might not be given another lease of life), a new power base was convened: national sovereignty, a precept that would be shared by the monarchic constitutions of 1822 and 1838, and by the republican one of 1911. This followed the French example (manifested in the monarchic constitution of 1791 and in the Spanish constitution of 1812), as not even republicans entertained a tradition of republicanism based upon popular sovereignty. This enables us to better understand the rejection of direct democracy and universal suffrage, and also the long incapacitation (concerning voting and standing for office) of the vast body of “passive” citizens, justified by “enlightened”, property- and gender-based criteria. Although the republicans had promised in the propaganda phase to alter this situation, they ultimately failed to do so. Indeed, throughout the whole period under analysis, the realisation of the potential of national sovereignty was mediated above all by the individual citizen through his choice of representatives. However, this representation was indirect and took place at national level, in the hope that action would be motivated not by particular local interests but by the common good, as dictated by reason. This was considered the only way for the law to be virtuous, a requirement that was also manifested in the separation and balance of powers. As sovereignty was postulated as single and indivisible, so would be the nation that gave it soul and the State that embodied it. Although these characteristics were common to foreign paradigms of reference, in Portugal, the constitutionalization process also sought to nationalise the idea of Empire. Indeed, this had been the overriding purpose of the 1822 Constitution, and it persisted, even after the loss of Brazil, until decolonization. Then, the dream of a single nation stretching from the Minho to Timor finally came to an end.

Process Engineering of Stem Cells for Clinical Application

Over the last decade, human embryonic stem cells (hESCs) have garnered a lot of attention owing to their inherent self-renewal ability and pluripotency. These characteristics have opened opportunities for potential stem cell-based regenerative medicines, for development of drug discovery platforms and as unique in vitro models for the study of early human development.(...)

A CMMI-compliant requirements management and development process

Requirements Engineering has been acknowledged an essential discipline for Software Quality. Poorly-defined processes for eliciting, analyzing, specifying and validating requirements can lead to unclear issues or misunderstandings on business needs and project’s scope. These typically result in customers’ non-satisfaction with either the products’ quality or the increase of the project’s budget and duration. Maturity models allow an organization to measure the quality of its processes and improve them according to an evolutionary path based on levels. The Capability Maturity Model Integration (CMMI) addresses the aforementioned Requirements Engineering issues. CMMI defines a set of best practices for process improvement that are divided into several process areas. Requirements Management and Requirements Development are the process areas concerned with Requirements Engineering maturity. Altran Portugal is a consulting company concerned with the quality of its software. In 2012, the Solution Center department has developed and applied successfully a set of processes aligned with CMMI-DEV v1.3, what granted them a Level 2 maturity certification. For 2015, they defined an organizational goal of addressing CMMI-DEV maturity level 3. This MSc dissertation is part of this organization effort. In particular, it is concerned with the required process areas that address the activities of Requirements Engineering. Our main goal is to contribute for the development of Altran’s internal engineering processes to conform to the guidelines of the Requirements Development process area. Throughout this dissertation, we started with an evaluation method based on CMMI and conducted a compliance assessment of Altran’s current processes. This allowed demonstrating their alignment with the CMMI Requirements Management process area and to highlight the improvements needed to conform to the Requirements Development process area. Based on the study of alternative solutions for the gaps found, we proposed a new Requirements Management and Development process that was later validated using three different approaches. The main contribution of this dissertation is the new process developed for Altran Portugal. However, given that studies on these topics are not abundant in the literature, we also expect to contribute with useful evidences to the existing body of knowledge with a survey on CMMI and requirements engineering trends. Most importantly, we hope that the implementation of the proposed processes’ improvements will minimize the risks of mishandled requirements, increasing Altran’s performance and taking them one step further to the desired maturity level.

Analysis of the direct and indirect costs of treatment of imported malaria in the Slovak Republic

This study analyzed the approximate cost of treatment of patients hospitalized with a diagnosis of imported malaria in Slovakia. Between 2003 and 2007, 15 patients with imported malaria were hospitalized. The mean direct cost of the treatment was 970.75 euros and the mean indirect cost was 53.15 euros. For the patient with the highest cost of treatment, the use of mefloquine prophylaxis would have represented only 0.5% of the total direct cost of treating the disease. Despite the partial resistance of plasmodia, malaria chemoprophylaxis is unequivocally a cheaper choice than subsequent treatment of malaria.

Policing and planning child and adolescent neuropsychiatry : the reform process in Bologna 2009-2014

Desde a aprovação do plano de saúde mental regional em Itália ... o Departamento Local de Saúde Mental e Perturbações aditivas em Bolonha, tem desenvolvido um projeto de reforma cujo objectivo é inovar o sistema de saúde mental local. ...ABSTRACT: Since the Regional mental health plan 2009-2011 was approved in Italy the Department of Mental Health and addictions of the Bologna local health trust developed as a laboratory aimed at innovating the mental health systen locally. ...

The effect of key process operational conditions on enhanced biological phosphorus removal from wastewater

Enhanced biological phosphorus removal (EBPR) is the most economic and sustainable option used in wastewater treatment plants (WWTPs) for phosphorus removal. In this process it is important to control the competition between polyphosphate accumulating organisms (PAOs) and glycogen accumulating organisms (GAOs), since EBPR deterioration or failure can be related with the proliferation of GAOs over PAOs. This thesis is focused on the effect of operational conditions (volatile fatty acid (VFA) composition, dissolved oxygen (DO) concentration and organic carbon loading) on PAO and GAO metabolism. The knowledge about the effect of these operational conditions on EBPR metabolism is very important, since they represent key factors that impact WWTPs performance and sustainability. Substrate competition between the anaerobic uptake of acetate and propionate (the main VFAs present in WWTPs) was shown in this work to be a relevant factor affecting PAO metabolism, and a metabolic model was developed that successfully describes this effect. Interestingly, the aerobic metabolism of PAOs was not affected by different VFA compositions, since the aerobic kinetic parameters for phosphorus uptake, polyhydroxyalkanoates (PHAs) degradation and glycogen production were relatively independent of acetate or propionate concentration. This is very relevant for WWTPs, since it will simplify the calibration procedure for metabolic models, facilitating their use for full-scale systems. The DO concentration and aerobic hydraulic retention time (HRT) affected the PAO-GAO competition, where low DO levels or lower aerobic HRT was more favourable for PAOs than GAOs. Indeed, the oxygen affinity coefficient was significantly higher for GAOs than PAOs, showing that PAOs were far superior at scavenging for the often limited oxygen levels in WWTPs. The operation of WWTPs with low aeration is of high importance for full-scale systems, since it decreases the energetic costs and can potentially improve WWTP sustainability. Extended periods of low organic carbon load, which are the most common conditions that exist in full-scale WWTPs, also had an impact on PAO and GAO activity. GAOs exhibited a substantially higher biomass decay rate as compared to PAOs under these conditions, which revealed a higher survival capacity for PAOs, representing an advantage for PAOs in EBPR processes. This superior survival capacity of PAOs under conditions more closely resembling a full-scale environment was linked with their ability to maintain a residual level of PHA reserves for longer than GAOs, providing them with an effective energy source for aerobic maintenance processes. Overall, this work shows that each of these key operational conditions play an important role in the PAO-GAO competition and should be considered in WWTP models in order to improve EBPR processes.