Hormonal factors and risk of aneurysmal subarachnoid hemorrhage - An international population-based, case-control study

Background and Purpose-Subarachnoid hemorrhage (SAH) is more common in women than in men, but the role of hormonal factors in its etiology remains uncertain. The aim of this study was to examine the relationship between hormonal factors and risk of SAH in women. Methods-This was a prospective, multicenter, population-based, case-control study performed in 4 major urban centers in Australia and New Zealand. Two hundred sixty-eight female cases of first-ever aneurysmal SAH occurred during 1995-1998. Controls were 286 frequency-matched women from the general population of each center. Outcome measures included risk of SAH associated with use of oral contraceptive pills (OCPs), hormone replacement therapy (HRT), and various endogenous hormonal factors including menstrual patterns, parity, age at birth of first child, and breast-feeding practices. Results-Cases and controls did not differ with regard to menstrual and reproductive history except in age at bir th of first child, where older age was associated with reduced risk of SAH (odds ratio [OR], 0.63; 95% CI, 0.43, 0.91). Relative to never use of HRT, the adjusted OR for over use of HRT was 0.64 (95% CI, 0.41, 0.98), which did not alter significantly after further adjustment for possible confounding factors. Borderline evidence of an inverse association was detected for past use of HRT (adjusted OR, 0.59; 95% CI, 0.30, 1.13) and current use of HRT (adjusted OR, 0.67; 95% CI, 0.40, 1.13), but there was no evidence of an association for use of OCPs (adjusted OR, 0.97; 95% CI, 0.58, 1.60). Conclusions-The risks of SAH are lower in women whose first pregnancy is at an older age and women who have ever used HRT but not OCPs. The findings suggest an independent etiologic role for hormonal factors in the pathogenesis of aneurysmal SAH and provide support for a protective role fur HRT on risk of SAH in postmenopausal women.

Simultaneous steady state and dynamic design of process systems using structural indicators

The simultaneous design of the steady-state and dynamic performance of a process has the ability to satisfy much more demanding dynamic performance criteria than the design of dynamics only by the connection of a control system. A method for designing process dynamics based on the use of a linearised systems' eigenvalues has been developed. The eigenvalues are associated with system states using the unit perturbation spectral resolution (UPSR), characterising the dynamics of each state. The design method uses a homotopy approach to determine a final design which satisfies both steady-state and dynamic performance criteria. A highly interacting single stage forced circulation evaporator system, including control loops, was designed by this method with the goal of reducing the time taken for the liquid composition to reach steady-state. Initially the system was successfully redesigned to speed up the eigenvalue associated with the liquid composition state, but this did not result in an improved startup performance. Further analysis showed that the integral action of the composition controller was the source of the limiting eigenvalue. Design changes made to speed up this eigenvalue did result in an improved startup performance. The proposed approach provides a structured way to address the design-control interface, giving significant insight into the dynamic behaviour of the system such that a systematic design or redesign of an existing system can be undertaken with confidence.

Minimum-order stable recursive filter design via the genetic algorithm approach

In this paper, the minimum-order stable recursive filter design problem is proposed and investigated. This problem is playing an important role in pipeline implementation sin signal processing. Here, the existence of a high-order stable recursive filter is proved theoretically, in which the upper bound for the highest order of stable filters is given. Then the minimum-order stable linear predictor is obtained via solving an optimization problem. In this paper, the popular genetic algorithm approach is adopted since it is a heuristic probabilistic optimization technique and has been widely used in engineering designs. Finally, an illustrative example is sued to show the effectiveness of the proposed algorithm.

Expression of growth factors in Dictyostelium discoideum

Growth factors and their binding proteins are important proteins regulating mammalian cell proliferation and differentiation so there is considerable interest in producing them as recombinant proteins, especially in hosts that do not already produce a complex mixture of growth factors. Many growth factors require posttranslational modifications making them unsuitable for production in Escherichia coli or other prokaryotes. Since several expression vector systems have been recently developed for foreign protein production in the cellular slime mould, Dictyostelium discoideum, we attempted to use two of these systems to express human insulin-like growth factor binding protein 6 (hIGFBP6) and bovine beta-cellulin (bBTC) as secreted proteins. Although both proteins were successfully produced in stably transformed amoebae, no secretion was detected in spite of several attempts to facilitate this occurring.

Anesthesia alarms in context: An observational study

This paper surveys current work on the design of alarms for anesthesia environments and notes some of the problems arising from the need to interpret alarms in context. Anesthetists' responses to audible alarms in the operating room were observed across four types of surgical procedure (laparoscopic, arthroscopic, cardiac, and intracranial) and across three phases of a procedure (induction, maintenance, and emergence). Alarms were classified as (a) requiring a corrective response, (b) being the intended result of a decision, (c) being ignored as a nuisance alarm, or (d) functioning as a reminder. Results revealed strong effects of the type of procedure and phase of procedure on the number and rate of audible alarms. Some alarms were relatively confined to specific phases; others were seen across phases, and responses differed according to phase. These results were interpreted in light of their significance for the development of effective alarm systems. Actual or potential applications of this research include the design of alarm systems that are more informative and more sensitive to operative context than are current systems.

A numerical study of flexural buckling of foliated rock slopes

The occurrence of foliated rock masses is common in mining environment. Methods employing continuum approximation in describing the deformation of such rock masses possess a clear advantage over methods where each rock layer and each inter-layer interface (joint) is explicitly modelled. In devising such a continuum model it is imperative that moment (couple) stresses and internal rotations associated with the bending of the rock layers be properly incorporated in the model formulation. Such an approach will lead to a Cosserat-type theory. In the present model, the behaviour of the intact rock layer is assumed to be linearly elastic and the joints are assumed to be elastic-perfectly plastic. Condition of slip at the interfaces are determined by a Mohr-Coulomb criterion with tension cut off at zero normal stress. The theory is valid for large deformations. The model is incorporated into the finite element program AFENA and validated against an analytical solution of elementary buckling problems of a layered medium under gravity loading. A design chart suitable for assessing the stability of slopes in foliated rock masses against flexural buckling failure has been developed. The design chart is easy to use and provides a quick estimate of critical loading factors for slopes in foliated rock masses. It is shown that the model based on Euler's buckling theory as proposed by Cavers (Rock Mechanics and Rock Engineering 1981; 14:87-104) substantially overestimates the critical heights for a vertical slope and underestimates the same for sub-vertical slopes. Copyright (C) 2001 John Wiley & Sons, Ltd.

The advantages of theft over toil: The design inference and arguing from ignorance

Intelligent design theorist William Dembski has proposed an explanatory filter for distinguishing between events due to chance, lawful regularity or design. We show that if Dembski's filter were adopted as a scientific heuristic, some classical developments in science would not be rational, and that Dembski's assertion that the filter reliably identifies rarefied design requires ignoring the state of background knowledge. If background information changes even slightly, the filter's conclusion will vary wildly. Dembski fails to overcome Hume's objections to arguments from design.

A time-harmonic inverse methodology for the design of RF coils in MRI

An inverse methodology is described to assist in the design of radio-frequency (RF) coils for magnetic resonance imaging (MRI) applications. The time-harmonic electromagnetic Green's functions are used to calculate current on the coil and shield cylinders that will generate a specified internal magnetic field. Stream function techniques and the method of moments are then used to implement this theoretical current density into an RF coil. A novel asymmetric coil operating for a 4.5 T MRI machine was designed and constructed using this methodology and the results are presented.

A method for the design of MRI radiofrequency coils based on triangular and pulse basis functions

This paper presents a numerical technique for the design of an RF coil for asymmetric magnetic resonance imaging (MRI) systems. The formulation is based on an inverse approach where the cylindrical surface currents are expressed in terms of a combination of sub-domain basis functions: triangular and pulse functions. With the homogeneous transverse magnetic field specified in a spherical region, a functional method is applied to obtain the unknown current coefficients. The current distribution is then transformed to a conductor pattern by use of a stream function technique. Preliminary MR images acquired using a prototype RF coil are presented and validate the design method. (C) 2002 Elsevier Science B.V. All rights reserved.

The VITATOPS (vitamins to prevent stroke) Trial: Rationale and design of an international, large, simple, randomised trial of homocysteine-lowering multivitamin therapy in patients with recent transient ischaemic attack or stroke

Background: Epidemiological studies suggest that raised plasma concentrations of total homocysteine (tHcy) may be a common, causal and treatable risk factor for atherothromboembolic ischaemic stroke. Although tHcy can be lowered effectively with small doses of folic acid, vitamin B-12 and vitamin B-6, it is not known whether lowering tHcy, by means of multivitamin therapy, can prevent stroke and other major atherothromboembolic vascular events. Purpose: To determine whether vitamin supplements (folic acid 2 mg, B-6 25 Mg, B-12 500 mug) reduce the risk of stroke, and other serious vascular events, in patients with recent stroke or transient ischaemic attacks of the brain or eye (TIA). Methods: An international, multi-centre, randomised, double-blind, placebo-controlled clinical trial. Results: As of November 2001, more than 1,400 patients have been randomised from 10 countries in four continents. Conclusion: VITATOPS aims to recruit and follow up 8,000 patients between 2000 and 2004, and provide a reliable estimate of the safety and effectiveness of dietary supplementation with folic acid, vitamin B-12, and vitamin B-6 in reducing recurrent serious vascular events among a wide range of patients with TIA and stroke. Copyright (C) 2002 S. Karger AG, Basel.

NMR shim coil design utilising a rapid spherical harmonic calculation method

A rapid spherical harmonic calculation method is used for the design of Nuclear Magnetic Resonance shim coils. The aim is to design each shim such that it generates a field described purely by a single spherical harmonic. By applying simulated annealing techniques, coil arrangements are produced through the optimal positioning of current-carrying circular arc conductors of rectangular cross-section. This involves minimizing the undesirable harmonies in relation to a target harmonic. The design method is flexible enough to be applied for the production of coil arrangements that generate fields consisting significantly of either zonal or tesseral harmonics. Results are presented for several coil designs which generate tesseral harmonics of degree one.

Long-term disability after first-ever stroke and related prognostic factors in the Perth Community Stroke Study, 1989-1990

Background and Purpose-Few reliable estimates of the long-term functional outcome after stroke are available. This population-based study aimed to describe disability, dependency, and related independent prognostic factors at 5 years after,a first-ever stroke in patients in Perth, Western Australia. Methods-All individuals with a suspected acute stroke who were resident in a geographically defined region (population, 138 708) of Perth, Western Australia, were registered prospectively and assessed according to standardized diagnostic criteria over a period of 18 months in 1989 to 1990. Patients were followed up prospectively at 4 and 12 months and 5 years after the index event. Results-There were 370 cases of first-ever stroke, and 277 patients survived to 30 days. Of these early survivors, 152 (55%) were alive at 5 years, and among those who were neither institutionalized (n=146) nor disabled (n=129) at the time of their stroke, 21 (14%) were institutionalized in a nursing home, and 47 (36%) were disabled. The most important predictors of death or disability at 5 years were increasing age, baseline disability defined by a Barthel Index score of <20/20 (odds ratio [OR], 6.3; 95% confidence interval [CI], 2.7 to 14), moderate hemiparesis (OR, 2.7. 95% CI, 1.1 to 6.2), severe hemiparesis (OR, 4.5; 95% CI, 1.1 to 19), and recurrent stroke (OR, 9.4; 95% CI, 3.0 to 30). A low level of activity before the stroke was a significant predictor of institutionalization, and subsequent recurrent stroke was a consistent, independent predictor of institutionalization, disability, and death or institutionalization, increasing the odds of each of these 3 adverse outcomes by 5- to 15-fold. Conclusions-Among 30-day survivors of first-ever stroke, about half survive 5 years; of survivors, one third remain disabled, and I in 7 are in permanent institutional care. The major modifiable predictors of poor long-term outcome are a low level of activity before the stroke and subsequent recurrent stroke. Efforts to increase physical activity among the elderly and to prevent recurrent stroke in survivors of a first stroke are likely to reduce the long-term burden of cerebrovascular disease.