Future trends of Finnish cement based construction

The construction material sector, as a capital intensive industry, is highly vulnerable to rapid fluctuations in the economic cycles. In Finland this was witnessed especially during the late 2000s, as in 2007 and 2008 the demand for several construction materials exceeded their supply and right after this, in 2009 the demand collapsed fast as a result of an international recession. These factors brought about the need to study the future trends of the market place of the commissioning company, Finnsementti Oy. As reliable short term market forecasts for the sector are difficult to compose, the study concentrates primarily in examining and identifying the trends that are likely to affect the Finnish cement industry, and as an extension, the concrete industry in a frame of 10 to 15 years. The study’s scope comprehends also the examination of the domestic construction sector, as it represents the end user industry of both cement and concrete. These motives for the study produce the research problem, which is to conduct a trend analysis for cement based building in the Finnish market area in the 2020s. The theoretical frame for composing a trend analysis in the case of this study is twofold. This is due to the fact that both, the macro and micro environments of the examined industries are studied. The main methods used are the PESTE-model (macro) and Porter’s five forces model (micro). The study applies a qualitative approach and the data is gathered by interviewing a group of experts from the cement, concrete and construction industries. The result of the paper is an overall trend analysis for the Finnish cement based building sector, which is based on ‘sub trend analyses’ concerning four identified sub-sectors of the Finnish construction industry. The results are a combination of findings from these sub-sectors and the analyzed data that deals with the studied sector’s macro and micro environment. The conclusions provide an overall picture of the examined sectors’ potential future as a whole and by defined sub-sectors of the construction industry. The recognition of future trends in different areas of the construction industry can be applied as a means for an industry actor’s decision making and in estimating the types of construction that are likely to grow or decline. Finally, based on the analyzed data and conclusions, the commissioning company is provided with a brief SWOT analysis, that provides additional tools for decision making and planning processes regarding the future.

Construction and validation of a surgical skills assessment tool for general surgery residency program

Objective: To develop and validate an instrument for measuring the acquisition of technical skills in conducting operations of increasing difficulty for use in General Surgery Residency (GSR) programs. Methods: we built a surgical skills assessment tool containing 11 operations in increasing levels of difficulty. For instrument validation we used the face validaity method. Through an electronic survey tool (Survey MonKey(r)) we sent a questionnaire to Full and Emeritus members of the Brazilian College of Surgeons - CBC - all bearers of the CBC Specialist Title. Results: Of the 307 questionnaires sent we received 100 responses. For the analysis of the data collected we used the Cronbach's alpha test. We observed that, in general, the overall alpha presented with values near or greater than 0.70, meaning good consistency to assess their points of interest. Conclusion: The evaluation instrument built was validated and can be used as a method of assessment of technical skill acquisition in the General Surgery Residency programs in Brazil.

Formal development and quantitative verification of dependable systems

-

Assessing the histopathology to depict the different stages of bovine tuberculosis infection in a naturally infected herd

The standard method for detection of bovine tuberculosis (TB) is the single intradermal tuberculin test (SITT). Nevertheless, current studies suggest that a single test is not enough to detect all cattle infected by TB, particularly when animals present different stages of infection. A dairy herd comprised of 270 cows was studied and 15 were reactive to SITT plus nine inconclusive animals. Blood samples (for IFN and ELISA) were collected from these 24 cows. At 30 days after injection of PPD, all the cows that were reactive to any of the employed tests were slaughtered, and tissues were processed by Bacteriology, Histopathology (HP) and PCR. According to HP 33.4% of the animals were positive, 45.8% inconclusive and 20.8% were negative. The inconclusive samples came from IFN positive animals, signalizing recent infection. Regarding the animals that were negative to HP, all of them were identified by IFN while ELISA was negative. Immune responses are different in recent and advanced infections, what supports the identification between chronically or recently infected animals. This multidisciplinary approach is mandatory for the interpretation of the various tools that are frequently employed for the diagnosis of TB and mainly to identify all infected animals.

Tuotehyväksynnän hallinta rakennusliikkeessä

Rakennusalan tuotehyväksyntä muuttuu EU:n rakennustuoteasetuksen astuessa voimaan 1.7.2013, jolloin CE-merkintä tulee pakolliseksi suurella osalle rakennustuotteita. Muutos aiheuttaa toimia yli 4000 suomalaisyrityksessä, jotka joutuvat hankkimaan tuotteelleen CE-merkinnän. Rakennustuoteasetus vaikuttaa kaikkiin alan toimijoihin. Tämä diplomityö on toteutettu toimintatutkimuksena, johon sisältyvien teemahaastattelujen kautta saatujen tutkimustulosten perusteella kehitettiin tuotehyväksynnän hallintaan työkalu, YIT-tuotehyväksyntäkortit. Ne laadittiin tuotehyväksynnän teoriaan pohjalta palvelemaan koko YIT Rakennus Oy:tä ja muokattiin yrityksen tarpeisiin sopiviksi soveltaen toimintatutkimuksen tuloksia. YIT-tuotehyväksyntäkortiston avulla pyritään kehittämään yrityksen toimintatapoja vaikuttamalla organisaation henkilöstöön osallistamalla ja vastuuttamalla heitä. Tuotehyväksynnän vaikutuksia rakennushankkeen eri vaiheisiin tutkittiin havainnoivan keskustelun avulla ja teemahaastatteluiden tuloksia analysoiden. YIT-tuotehyväksyntäkortistoa hallinnan välineenä testattiin pääasiassa haastattelujen avulla, sillä mallikortit eivät vielä mahdollistaneet laajempaa testausta käytännössä. Työn tuloksina esitellään YIT-tuotehyväksyntäkorttien laadintaprosessi ja paneudutaan tarkemmin korttien sisältöön.

Torque teno sus virus (TTSuV) infection at different stages of pig production cycle

Torque teno sus virus (TTSuV) infection is present in pig herds worldwide. It has been demonstrated that TTSuV might increase the severity of other important viral diseases with economic and public health impacts. At present, there is no information on the age distribution of pigs infected with TTSuV in Brazilian herds. This study evaluated the frequency of TTSuV infection in pigs at different stages of production. Fecal samples (n=190) from pigs at 1 to 24 weeks of age and from breeders at 6 farrow-to-weaning (up to 8 weeks of age) and 9 grower-to-finish (9 weeks of age onwards) farms in the western region of Paraná state, Brazil, were evaluated by PCR. Fragments of the 5' UTRs of TTSuV1 and/or TTSuVk2 DNAs were identified in 126 (66.3%) of the fecal samples. Significant differences were found with the percentages of positive samples for TTSuV1, TTSuVk2, and mixed infections by both genera between and within the different pig production stages. Fecal samples from the grower-to-finish farms had TTSuV detection rates (90.1%; 64/71) that were significantly (p<0.05) higher than those from the farrow-to-weaning farms (52.1%; 62/119). TTSuV detection was significantly (p<0.05) more frequent in finisher pigs than in the animals from the other stages. The UTR nucleotide sequences in this study presented higher similarities to strains from Norway (96%, TTSuV1), and Argentina and China (97.1%, TTSuVk2). These results suggest that TTSuV infection has spread to pigs of all production stages and that the viral infection rate increases with the age of the animals. In the western region of Paraná state, Brazil, TTSuV1 and TTSuVk2-induced infections were more frequently observed in suckling piglets and finisher pigs, respectively. Phylogenetic analysis pointed out the possibility of different strains of TTSuV1 and TTSuVk2 circulating in pig herds of Brazil.

Morphological and morphometric evaluation of prepubertal gilt ovaries, uterine tubes and uterus at different oestrus cycle stages

Studies are performed in developing techniques/procedures that provide greater reproductive performance in farm animals, including pigs. In this sense, the study of gilts reproductive organs at different oestrus cycle stages for assessing the presence of abnormalities and/or other parameters that may affect the future animal fertility is important. In order to evaluate the morphological, morphometric and histomorphometric features of ovaries, uterus and uterine tubes (UTs) characteristics of prepubertal gilts at different oestrus cycle stages, reproductive tracts from 48 animals immediately after slaughter were obtained. After, the structures were dissected and removed, and the ovaries were used for classification of oestrus cycle stage of each gilt in follicular phase (FP) and luteal phase (FL). Then, morphometric evaluations of ovaries, UTs, uterine horns and uterine body were performed. Besides that, medial segments of UTs and uterus were fixed in Bouin solution, processed and included in paraffin, when histological sections of 5.0 micrometers (µm) were obtained and stained with Hematoxylin and Eosin. Histomorphometric analyzes using image capture system and specific software were performed. Afterwards, data were submitted to Student's t test for assessment the statistical differences (P<0.05) between the two different oestrus cycle stages (FP × LP) and between the placement of reproductive structures (right × left antimer). Among the gilts evaluated, 35 were in the FP and 13 in LP. There was no difference (P>0.05) between morphometric parameters of ovaries, UTs and uterus of gilts in FP and LP. Likewise, in respect to the placement of reproductive structures, both in the oestrus cycle stages, as in the general average, there was no difference (P>0.05). Regarding the histomorphometric variables, gilts classified in FP presented a higher (P<0.05) height of glandular and UT epithelium compared to animals in LP. On the other hand, the diameter of endometrial glands was higher (P<0.05) in gilts at LP compared to FP. Furthermore, gilts in LP presented a higher (P<0.05) proportion of endometrium occupied by glands, whereas animals in FP had a higher (P<0.05) proportion of connective tissue and blood vessels. In conclusion, in prepubertal gilts, the histomorphometric parameters as endometrial glands diameter, the height of glandular epithelium and of UT epithelium and the proportion of endometrium occupied by connective tissue, besides the glands and blood vessels varies through the oestrus cycle, possibly under the influence of ovarian steroids.

Scaling up stepwise feature introduction to construction of large software systems

Developing software is a difficult and error-prone activity. Furthermore, the complexity of modern computer applications is significant. Hence,an organised approach to software construction is crucial. Stepwise Feature Introduction – created by R.-J. Back – is a development paradigm, in which software is constructed by adding functionality in small increments. The resulting code has an organised, layered structure and can be easily reused. Moreover, the interaction with the users of the software and the correctness concerns are essential elements of the development process, contributing to high quality and functionality of the final product. The paradigm of Stepwise Feature Introduction has been successfully applied in an academic environment, to a number of small-scale developments. The thesis examines the paradigm and its suitability to construction of large and complex software systems by focusing on the development of two software systems of significant complexity. Throughout the thesis we propose a number of improvements and modifications that should be applied to the paradigm when developing or reengineering large and complex software systems. The discussion in the thesis covers various aspects of software development that relate to Stepwise Feature Introduction. More specifically, we evaluate the paradigm based on the common practices of object-oriented programming and design and agile development methodologies. We also outline the strategy to testing systems built with the paradigm of Stepwise Feature Introduction.

Integration of learning supportive applications into the development of the e-portfolio construction process

The portfolio as a means of demonstrating personal skills has lately been gaining prominence among technology students. This is partially due to the introduction of electronic portfolios, or e-portfolios. As platforms for e-portfolio management with different approaches have been introduced, the learning cycle, traditional portfolio pedagogy, and learner centricity have sometimes been forgotten, and as a result, the tools have been used for the most part as data depositories. The purpose of this thesis is to show how the construction of e-portfolios of IT students can be supported by institutions through the usage of different tools that relate to study advising, teaching, and learning. The construction process is presented as a cycle based on learning theories. Actions related to the various phases of the e-portfolio construction process are supported by the implementation of software applications. To maximize learner-centricity and minimize the intervention of the institution, the evaluated and controlled actions for these practices can be separated from the e-portfolios, leaving the construction of the e-portfolio to students. The main contributions of this thesis are the implemented applications, which can be considered to support the e-portfolio construction by assisting in planning, organizing, and reflecting activities. Eventually, this supports the students in their construction of better and more extensive e-portfolios. The implemented tools include 1) JobSkillSearcher to help students’ recognition of the demands of the ICT industry regarding skills, 2) WebTUTOR to support students’ personal study planning, 3) Learning Styles to determine students' learning styles, and 4) MyPeerReview to provide a platform on which to carry out anonymous peer review processes in courses. The most visible outcome concerning the e-portfolio is its representation, meaning that one can use it to demonstrate personal achievements at the time of seeking a job and gaining employment. Testing the tools and the selected open-source e-portfolio application indicates that the degree of richness of e-portfolio content can be increased by using the implemented applications.

Kriteeristö energiatehokkuuden toteutumiseksi kaupungin julkisissa rakennushankkeissa

Työssä esitetään kriteeristö tehostamaan energiatehokkuuden toteutumista kaupungin julkisissa rakennushankkeissa. Kriteeristön tarkoituksena on edistää julkisen uudisrakennushankkeen energiatehokkuutta, ottaen huomioon hankkeen kokonaistaloudellisuus. Energiatehokkuutta ja kokonaistaloudellisuutta kunnallisessa rakentamisessa stimuloivat mm. kansainvälisten ja kansallisten sopimusten energiansäästötavoitteet, sekä kuntien tiukka budjettitilanne. Jotta kokonaistaloudellisuustavoitteet täyttyisivät, työssä käytettiin hyväksi elinkaariajattelutapaa. Työssä selvitettiin kirjallisuuden ja ammattilaisten haastattelujen tarjoaman tiedon pohjalta, mitkä näkökohdat vaikuttavat julkisen palvelurakennuksen energiatehokkuuteen sen elinkaaren eri vaiheissa. Hankitun tiedon avulla luotiin kaupungin rakennusinvestointien hankinnasta vastaavien tahojen käyttöön tarkoitettu kriteeristö, joka auttaa tunnistamaan ja valitsemaan energiatehokkuuden ja kokonaistaloudellisuuden kannalta parhaimmat hankkeen toteutustavat. Jatkotoimenpiteenä työssä laadittua kriteeristöä tullaan kehittämään edelleen case-kohteista saatavien kokemusten perusteella. Tutkimus osoitti, että uudisrakentamisen energiataloudellisuuden lisäksi on panostettava energiataloudelliseen korjausrakentamiseen, koska olemassa oleva rakennuskanta muodostaa merkittävän osan kaupungin energiankulutuksesta.

Effect of selectivity of herbicides and plant growth regulators used in sugarcane crops on immature stages of Trichogramma galloi (Hymenoptera: Trichogrammatidae)

Herbicides and plant growth regulators are often used in sugarcane management. However, the use of non-selective pesticides can cause adverse effects on the efficiency of beneficial insects in integrated pest management. Within this context, this study aimed to evaluate the effect of such products on the immature stages of the parasitoid Trichogramma galloi. Eggs of Diatraea saccharalis containing the parasitoid at the egg-larva stage and at the prepupal and pupal stages were immersed in test solutions of the following pesticides (maximum recommended doses for sugarcane): herbicides clomazone and diuron + hexazinone, and plant growth regulators trinexapac-ethyl and sulfometuron-methyl. The biological properties evaluated were emergence (F1 and F2) and number of eggs parasitized by T. galloi (F1). The products were classified according to percentage of reduction in emergence and parasitism: harmless (<30%), slightly harmful (30-79%), moderately harmful (80-99%) and harmful (>99%). The pesticides evaluated were considered to be harmless or slightly harmful to immature T. galloi and, thus, their use should be preferred for preserving this parasitoid species in sugarcane management programs.