CT attenuation values of blood and myocardium: rationale for accurate coronary artery calcifications detection with multi-detector CT.

OBJECTIVES: To determine inter-session and intra/inter-individual variations of the attenuations of aortic blood/myocardium with MDCT in the context of calcium scoring. To evaluate whether these variations are dependent on patients' characteristics. METHODS: Fifty-four volunteers were evaluated with calcium scoring non-enhanced CT. We measured attenuations (inter-individual variation) and standard deviations (SD, intra-individual variation) of the blood in the ascending aorta and of the myocardium of left ventricle. Every volunteer was examined twice to study the inter-session variation. The fat pad thickness at the sternum and noise (SD of air) were measured too. These values were correlated with the measured aortic/ventricular attenuations and their SDs (Pearson). Historically fixed thresholds (90 and 130 HU) were tested against different models based on attenuations of blood/ventricle. RESULTS: The mean attenuation was 46 HU (range, 17-84 HU) with mean SD 23 HU for the blood, and 39 HU (10-82 HU) with mean SD 18 HU for the myocardium. The attenuation/SD of the blood were significantly higher than those of the myocardium (p < 0.01). The inter-session variation was not significant. There was a poor correlation between SD of aortic blood/ventricle with fat thickness/noise. Based on existing models, 90 HU threshold offers a confidence interval of approximately 95% and 130 HU more than 99%. CONCLUSIONS: Historical thresholds offer high confidence intervals for exclusion of aortic blood/myocardium and by the way for detecting calcifications. Nevertheless, considering the large variations of blood/myocardium CT values and the influence of patient's characteristics, a better approach might be an adaptive threshold.

Communication challenges in virtual teams – a case study of implementing computer-mediated communication technologies in inter-organisational virtual teams

This thesis seeks to answer, if communication challenges in virtual teams can be overcome with the help of computer-mediated communication. Virtual teams are becoming more common work method in many global companies. In order for virtual teams to reach their maximum potential, effective asynchronous and synchronous methods for communication are needed. The thesis covers communication in virtual teams, as well as leadership and trust building in virtual environments with the help of CMC. First, the communication challenges in virtual teams are identified by using a framework of knowledge sharing barriers in virtual teams by Rosen et al. (2007) Secondly, the leadership and trust in virtual teams are defined in the context of CMC. The performance of virtual teams is evaluated in the case study by exploiting these three dimensions. With the help of a case study of two virtual teams, the practical issues related to selecting and implementing communication technologies as well as overcoming knowledge sharing barriers is being discussed. The case studies involve a complex inter-organisational setting, where four companies are working together in order to maintain a new IT system. The communication difficulties are related to inadequate communication technologies, lack of trust and the undefined relationships of the stakeholders and the team members. As a result, it is suggested that communication technologies are needed in order to improve the virtual team performance, but are not however solely capable of solving the communication challenges in virtual teams. In addition, suitable leadership and trust between team members are required in order to improve the knowledge sharing and communication in virtual teams.

Ultra-sonografia virtual: reprodutibilidade intra-observador

OBJETIVO: Analisar a reprodutibilidade intra-observador da ultra-sonografia tridimensional (US3D) real com a US virtual, nas modalidades multiplanar e volumétrica. MATERIAIS E MÉTODOS: Foram examinados, prospectivamente, 132 blocos provenientes de 44 avaliações de 26 conceptos. Dezoito conceptos tinham idade gestacional ecográfica de oito semanas a oito semanas e seis dias, e 26 tinham de dez semanas a dez semanas e seis dias. Realizou-se a US3D, analisando-se: comprimento cabeça-nádega, saco gestacional, saco amniótico, translucência nucal, conduto onfalomesentérico, vesícula vitelínica, membros superiores, membros inferiores, distinção cabeça-tórax, perfil da face, coronal da face, implantação das orelhas, perfil da coluna, coronal da coluna, parede abdominal fechada. Foram obtidos três blocos por concepto para posterior realização da US virtual. A análise estatística foi feita utilizando-se o teste t de Student, o teste de McNemar e o kappa. RESULTADOS: No grupo I, a avaliação ultra-sonográfica 3D real multiplanar versus 3D virtual multiplanar, na análise das variáveis contínuas, evidenciou diferença significativa para todas. Na avaliação das variáveis categóricas, evidenciou-se que todas não apresentaram diferença significativa. No grupo II, a avaliação ultra-sonográfica 3D real volumétrica versus 3D virtual volumétrica demonstrou diferença significativa apenas para a variável implantação de orelhas. Os resultados das análises das variáveis categóricas evidenciaram concordância para a maioria das variáveis analisadas em ambos os grupos. CONCLUSÃO: Há reprodutibilidade intra-observador da US3D com a modalidade virtual, multiplanar e volumétrica.

Elearning y la educación postmoderna: trayectorias y experiencias del estudiantado virtual

La emergencia y dinámica del Elearning, en los actuales escenarios de educación superior, evidencia una importante transformación acontecida en el marco de la sociedad de la información: la utilización de las TIC en los procesos de construcción del conocimiento. Este cambio ha ido de la mano, en primer lugar, de la mejora en la calidad y la oferta formativa existente, una oferta que ha buscado ser más inclusiva y representativa de las actuales demandas sociales. Y en segundo lugar, se trata de una modalidad que ha intentado adaptarse a las actuales características del estudiantado digital y del digitalizado (Prensky, 2006), cuyo rol en los proceso de enseñanza, tiende a ser más activo que en los modelos de formación tradicional. El presente artículo, se focaliza en esta segunda dimensión, analizando como el Elearning intenta ser un elemento de mediación entre las transformaciones actuales que se dan en la educación superior y la emergencia de un nuevo estudiantado virtual, cada vez más activo y autónomo.

Body Image in Eating Disorders: The Influence of Exposure to Virtual-Reality Environments.

The aim of this article was to study the effect of virtual-reality exposure to situations that are emotionally significant for patients with eating disorders (ED) on the stability of body-image distortion and body-image dissatisfaction. A total of 85 ED patients and 108 non-ED students were randomly exposed to four experimental virtual environments: a kitchen with low-calorie food, a kitchen with high-calorie food, a restaurant with low-calorie food, and a restaurant with high-calorie food. In the interval between the presentation of each situation, body-image distortion and body-image dissatisfaction were assessed. Several 2 x 2 x 2 repeated measures analyses of variance (high-calorie vs. low-calorie food x presence vs. absence of people x ED group vs. control group) showed that ED participants had significantly higher levels of body-image distortion and body dissatisfaction after eating high-calorie food than after eating low-calorie food, while control participants reported a similar body image in all situations. The results suggest that body-image distortion and body-image dissatisfaction show both trait and state features. On the one hand, ED patients show a general predisposition to overestimate their body size and to feel more dissatisfied with their body image than controls. On the other hand, these body-image disturbances fluctuate when participants are exposed to virtual situations that are emotionally relevant for them.

La gestión de libros electrónicos de la Biblioteca Virtual de la Universitat Oberta de Catalunya

La comunicación que se presenta, muestra cómo se lleva a cabo la gestión de los procesos técnicos de los libros electrónicos en la Biblioteca Virtual (en adelante BV) de la Universitat Oberta de Catalunya (en adelante UOC). La BV está integrada en el Campus Virtual y en las aulas virtuales de la Universidad. La principal particularidad de la docencia en la UOC se encuentra en el hecho de que se realiza, en su totalidad, por medio de un Campus Virtual.La BV de la UOC pone especial énfasis en la adquisición de libros digitales para mejorar el acceso de los usuarios a sus recursos y colecciones en una universidad con un modelo de aprendizaje caracterizada por su virtualidad (el 13 de abril de 2011, el Consejo de Gobierno acordó priorizar la adquisición de documentos en formato electrónico). La irrupción de los libros electrónicos en la BV ha comportado una revisión de los procesos técnicos, de manera que los circuitos de adquisición, catalogación y gestión de la colección digital trabajen de forma coordinada. En primer lugar, se describe el entorno en el que se adquieren y se utilizan los libros electrónicos, los distintos escenarios de adquisición y modelos de compra con los que se puede encontrar la BV de la UOC. Se valora el importante papel que desempeña el proveedor en la compra de libros electrónicos. La BV siempre intenta encontrar un equilibrio entre las necesidades de los usuarios, las posibilidades del mercado y los recursos disponibles. Las compras pueden o no ser consorciadas. Cuando se trata de compra consorciada de libros electrónicos se han de sopesar las ventajas e inconvenientes que esta gestión conlleva, tanto económicas cómo de acceso a los contenidos. Cuando un libro está disponible desde distintas plataformas, hay que estudiar cuál es la que se adecúa mejor a las necesidades de la BV. A la hora de decidir el modelo de compra a utilizar hay que considerar diferentes elementos, como la adquisición individual o en paquetes, la compra directa o subscripción, etc. En segundo lugar, se describen los circuitos internos y tratamientos técnicos que experimentan los libros electrónicos. La gestión de estos procesos la llevan a cabo, en mayor o menor medida, los responsables de los servicios de Adquisición, Catalogación y gestión de la Colección Digital, dependiendo de cómo se haya realizado la adquisición (a perpetuidad o subscripción). Por último, se muestran las distintas opciones de acceso que tiene la BV de la UOC a los libros electrónicos, utilizando para ello un sistema de autenticación de usuarios mediante IP (a través de un porxy WAM). Los puntos de acceso a los libros electrónicos son: el catálogo de la BV, el quick set de libros electrónicos de Metalib, el listado A-Z de SFX, la herramienta de descubrimiento Summon y, además, un nuevo acceso desde el nuevo Web de la BV de la UOC. El acceso a los libros electrónicos de la BV de la UOC es una cuestión que aún no está totalmente resuelta. Desde la nueva Web de la BV se está trabajando para conseguir un punto de acceso único. La principal razón por la que no siempre es posible este único punto de acceso es la existencia o inexistencia de las funcionalidades de metabúsqueda en los libros electrónicos que ofrece cada proveedor. A pesar de la complejidad del nuevo contexto del libro electrónico, la BV de la UOC sigue apostando por los nuevos formatos de lectura, que en el 2013 ha representado el 32,30% del fondo bibliográfico y un 45% sobre el presupuesto dedicado para el 2013. Este proceso se realiza trabajando estrechamente con el profesorado, mediante los contenidos disponibles en la ¿Biblioteca en el aula¿ y potenciando la flexibilidad de los gestores y la construcción de nuevos flujos de trabajo que permitan optimizar y facilitar la transición de la lectura de libros tradicionales a la consulta de monografías en formato electrónico.

Image quality in CT: From physical measurements to model observers.

Evaluation of image quality (IQ) in Computed Tomography (CT) is important to ensure that diagnostic questions are correctly answered, whilst keeping radiation dose to the patient as low as is reasonably possible. The assessment of individual aspects of IQ is already a key component of routine quality control of medical x-ray devices. These values together with standard dose indicators can be used to give rise to 'figures of merit' (FOM) to characterise the dose efficiency of the CT scanners operating in certain modes. The demand for clinically relevant IQ characterisation has naturally increased with the development of CT technology (detectors efficiency, image reconstruction and processing), resulting in the adaptation and evolution of assessment methods. The purpose of this review is to present the spectrum of various methods that have been used to characterise image quality in CT: from objective measurements of physical parameters to clinically task-based approaches (i.e. model observer (MO) approach) including pure human observer approach. When combined together with a dose indicator, a generalised dose efficiency index can be explored in a framework of system and patient dose optimisation. We will focus on the IQ methodologies that are required for dealing with standard reconstruction, but also for iterative reconstruction algorithms. With this concept the previously used FOM will be presented with a proposal to update them in order to make them relevant and up to date with technological progress. The MO that objectively assesses IQ for clinically relevant tasks represents the most promising method in terms of radiologist sensitivity performance and therefore of most relevance in the clinical environment.

99mTc-HDP SPECT With CT Myelography in a 1-Step Procedure.

We present the case of a 45-year-old woman with a history of multiple back surgeries to illustrate the feasibility of combining CT myelography (myeloCT) and Tc-HDP SPECT/CT bone scan in a 1-step procedure to realize a combined SPECT-myeloCT. Myelography CT and SPECT/CT were required to assess nerve root compression and pseudarthrosis, respectively. The proposed combined acquisition protocol provides information about nervous compression as well as pseudarthrosis in a 1 examination, optimizing radiation dose and patient comfort.

Extended Endoscopic Endonasal Approaches for Cerebral Aneurysms: Anatomical, Virtual Reality and Morphometric Study

Introduction. The purpose of the present contribution is to perform a detailed anatomic and virtual reality three-dimensional stereoscopic study in order to test the effectiveness of the extended endoscopic endonasal approaches for selected anterior and posterior circulation aneurysms. Methods. The study was divided in two main steps: (1) simulation step, using a dedicated Virtual Reality System (Dextroscope, Volume Interactions); (2) dissection step, in which the feasibility to reach specific vascular territory via the nose was verified in the anatomical laboratory. Results. Good visualization and proximal and distal vascular control of the main midline anterior and posterior circulation territory were achieved during the simulation step as well as in the dissection step (anterior communicating complex, internal carotid, ophthalmic, superior hypophyseal, posterior cerebral and posterior communicating, basilar, superior cerebellar, anterior inferior cerebellar, vertebral, and posterior inferior cerebellar arteries). Conclusion. The present contribution is intended as strictly anatomic study in which we highlighted some specific anterior and posterior circulation aneurysms that can be reached via the nose. For clinical applications of these approaches, some relevant complications, mainly related to the endonasal route, such as proximal and distal vascular control, major arterial bleeding, postoperative cerebrospinal fluid leak, and olfactory disturbances must be considered

Protein pocket and ligand shape comparison and its application in virtual screening.

Understanding molecular recognition is one major requirement for drug discovery and design. Physicochemical and shape complementarity between two binding partners is the driving force during complex formation. In this study, the impact of shape within this process is analyzed. Protein binding pockets and co-crystallized ligands are represented by normalized principal moments of inertia ratios (NPRs). The corresponding descriptor space is triangular, with its corners occupied by spherical, discoid, and elongated shapes. An analysis of a selected set of sc-PDB complexes suggests that pockets and bound ligands avoid spherical shapes, which are, however, prevalent in small unoccupied pockets. Furthermore, a direct shape comparison confirms previous studies that on average only one third of a pocket is filled by its bound ligand, supplemented by a 50 % subpocket coverage. In this study, we found that shape complementary is expressed by low pairwise shape distances in NPR space, short distances between the centers-of-mass, and small deviations in the angle between the first principal ellipsoid axes. Furthermore, it is assessed how different binding pocket parameters are related to bioactivity and binding efficiency of the co-crystallized ligand. In addition, the performance of different shape and size parameters of pockets and ligands is evaluated in a virtual screening scenario performed on four representative targets.

Optimization of Radiation Dose and Image Quality in Musculoskeletal CT: Emphasis on Iterative Reconstruction Techniques (Part 1).

Computed tomography (CT) is a modality of choice for the study of the musculoskeletal system for various indications including the study of bone, calcifications, internal derangements of joints (with CT arthrography), as well as periprosthetic complications. However, CT remains intrinsically limited by the fact that it exposes patients to ionizing radiation. Scanning protocols need to be optimized to achieve diagnostic image quality at the lowest radiation dose possible. In this optimization process, the radiologist needs to be familiar with the parameters used to quantify radiation dose and image quality. CT imaging of the musculoskeletal system has certain specificities including the focus on high-contrast objects (i.e., in CT of bone or CT arthrography). These characteristics need to be taken into account when defining a strategy to optimize dose and when choosing the best combination of scanning parameters. In the first part of this review, we present the parameters used for the evaluation and quantification of radiation dose and image quality. In the second part, we discuss different strategies to optimize radiation dose and image quality at CT, with a focus on the musculoskeletal system and the use of novel iterative reconstruction techniques.

Optimization of Radiation Dose and Image Quality in Musculoskeletal CT: Emphasis on Iterative Reconstruction Techniques (Part 2).

Computed tomography (CT) is a modality of choice for the study of the musculoskeletal system for various indications including the study of bone, calcifications, internal derangements of joints (with CT arthrography), as well as periprosthetic complications. However, CT remains intrinsically limited by the fact that it exposes patients to ionizing radiation. Scanning protocols need to be optimized to achieve diagnostic image quality at the lowest radiation dose possible. In this optimization process, the radiologist needs to be familiar with the parameters used to quantify radiation dose and image quality. CT imaging of the musculoskeletal system has certain specificities including the focus on high-contrast objects (i.e., in CT of bone or CT arthrography). These characteristics need to be taken into account when defining a strategy to optimize dose and when choosing the best combination of scanning parameters. In the first part of this review, we present the parameters used for the evaluation and quantification of radiation dose and image quality. In the second part, we discuss different strategies to optimize radiation dose and image quality of CT, with a focus on the musculoskeletal system and the use of novel iterative reconstruction techniques.

Identifying Specific Cues and Contexts Related to Smoking Craving for the Development of Effective Virtual Environments

Craving is considered the main variable associated with relapse after smoking cessation. Cue Exposure Therapy (CET) consists of controlled and repeated exposure to drug-related cues with the aim of extinguishing craving responses. Some virtual reality (VR) environments, such as virtual bars or parties, have previously shown their efficacy as tools for eliciting smoking craving. However, in order to adapt this technology to smoking cessation interventions, there is a need for more diverse environments that enhance the probability of generalization of extinction in real life. The main objective of this study was to identify frequent situations that produce smoking craving, as well as detecting specific craving cues in those contexts. Participants were 154 smokers who responded to an ad hoc self-administered inventory for assessing craving level in 12 different situations. Results showed that having a drink in a bar/pub at night, after having lunch/dinner in a restaurant and having a coffee in a cafe or after lunch/dinner at home were reported as the most craving-inducing scenarios. Some differences were found with regard to participants' gender, age, and number of cigarettes smoked per day. Females, younger people, and heavier smokers reported higher levels of craving in most situations. In general, the most widely cited specific cues across the contexts were people smoking, having a coffee, being with friends, and having finished eating. These results are discussed with a view to their consideration in the design of valid and reliable VR environments that could be used in the treatment of nicotine addicts who wish to give up smoking.