Influência do desbalanceamento da onda retangular na liga de alumínio 6063-T6 soldada pelo processo TIG-CA

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Análise Biomecânica em implantes com diferentes tipos de conexão: estudo pelo MEF-3D

The aim of this study was to evaluate the biomechanical behavior of different implant connection types, by means of three-dimensional finite element analysis. 3 Three-dimensional models were created with a graphic modeling software: SolidWorks 2006 and Rhinoceros 4.0, and InVesalius (CTI, São Paulo, Brasil), the bone was obtained by computerized tomography of a sagittal section of the molar region. The model was composed by bone block with an implant (4 x 10 mm) (Conexão Sistemas de Prótese, São Paulo), with different implant connections: external hex, internal hex and Morse-taper with the corresponding prosthetic component Ucla or Morse-taper abutment. The Three-dimensional models were transferred to finite element software Femap 10.0 (Siemens PLM Software Inc., CA, USA), to generate a mesh, boundary conditions and loading. An axial (200N) and oblique load (100N) was applied on the occlusal surface of the crowns. Analyses were performed using the finite element software NEiNastran 9.0 (Noran Engineering, Inc., USA) and transferred to the Femap 10.0 to obtain the results; after the results were visualized using von Mises stress maps and Maximum stress principal. The results showed the stress distribution was similar between models, with a little superiority of Morse-taper connection. It was concluded that: the three connection types were biomechanical viable; The Morse-taper connection presented the better internal stress distribution; there was not significant biomechanical differences on the bone.

Yeast CA-11 fermentation in musts treated with brown and green propolis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Retificador entrelaçado com elevado fator de potência para operação de um veículo trólebus alimentado por redes em CA Ou CC

This paper presents the development and the main results for an interleaved boost rectifier operating as a special input power stage for a trolleybus type vehicle, allowing its feeding by alternate current (AC) or direct current (DC) distribution power systems. When feeding with two wires (single phase) alternate current distribution system, the converter accomplish active power factor correction, providing a relatively sinusoidal current with low total harmonic distortion (THD) and fully complying with IEC 61000-3-4 standards. In addition, a management control system promotes the required automatic operation changes for the proposed rectifier when the vehicle is changing from the DC distribution power system to the AC distribution power system and vice-versa, keeping its original electrical DC system characteristics for the adjustable speed driver sub-system. The main experimental results for a prototype rated at 150kW are presented, considering its application for a trolleybus with DC adjustable speed driver, demonstrating the proposed converter benefits and the possibility of AC feeding system for trolleybus type vehicle.

Morphology and properties of (Ba, Sr, Ca) titanates synthesized by microwave-assisted hydrothermal method

Ba1-xCaxTiO3, Ba1-xSrxTiO3 and Sr1-xCaxTiO3 (x = 0, 0.25, 0.50, 0.75 and 1) nanoparticles were synthesized using the microwave-assisted hydrothermal method. Samples were prepared for 40 minutes at 140°C under a pressure of 3 MPa using an adapted domestic microwave oven. The samples were characterized by X-Ray diffraction (XRD), scanning electron microscopy (FE-SEM), and Raman, photoluminescence (PL) and ultraviolet-visible (UV-Vis) spectroscopies. XRD data show that ceramic powders have crystalline phases associated with a short-range structural disorder. This structural disorder is confirmed by Raman spectral bands indicating multi-phonon processes and the presence of defects or impurities. Such defects account for a broad band in the photoluminescence spectrum in the green light (460 nm) region for all samples. Gap energy variation, obtained from UV-Vis spectra, suggest a non-uniform band structure of these titanates in accordance with the PL results. The morphology of each sample is changed with doping and varies from a spherical to cubic appearance for energy minimization.

Correlations of trace elements in breast human tissues: Evaluation of spatial distribution using μ-XRF

The aim of this work is to investigate microscopic correlations between trace elements in breast human tissues. A synchrotron X-ray fluorescence microprobe system (μ-XRF) was used to obtain two-dimensional distribution of trace element Ca, Fe, Cu and Zn in normal (6 samples) and malignant (14 samples) breast tissues. The experiment was performed in X-ray Fluorescence beam line at Laboratório Nacional de Luz Síncrotron (LNLS), Campinas, Brazil. The white microbeam was generated with a fine conical capillary with a 20 μm output diameter. The samples were supported on a XYZ table. An optical microscope with motorized zoom was used for sample positioning and choice the area to be scanned. Automatic two-dimensional scans were programmed and performed with steps of 30 μm in each direction (x, y) on the selected area. The fluorescence signals were recorded using a Si(Li) detector, positioned at 90 degrees with respect to the incident beam, with a collection time of 10 s per point. The elemental maps obtained from each sample were overlap to observe correlation between trace elements. Qualitative results showed that the pairs of elements Ca-Zn and Fe-Cu could to be correlated in malignant breast tissues. Quantitative results, achieved by Spearman correlation tests, indicate that there is a spatial correlation between these pairs of elements (p < 0.001) suggesting the importance of these elements in metabolic processes associated with the development of the tumor.

Digestibilidade do amido e disponibilidade de ca e p em alimentos energéticos extrusados para a tilápia do nilo (Oreochromis niloticus)

Apparent digestibility coefficients (ADC) of starch and calcium (Ca) and phosphorus (P) apparent availability were evaluated in five cereal grain products and byproducts (corn, wheat meal, rice grain, rice bran and sorghum) for Nile tilapia. Chromic oxide was used as an external digestibility marker. The highest Ca and P apparent availability, respectively, were obtained for rice grain (43.03 and 64.79%), sorghum (39.89 and 58.09%) and corn (22.18 and 19.48%), while rice bran (-31.49 and 3.25%) and wheat meal (5.80 and 1.18%) showed the lowest values. Starch digestibility varied between 99.45 and 95.59% among the evaluated ingredients. This high ADC of starch observed in this study confirms that Nile tilapia is able to efficiently digest and utilize complex carbohydrates.

Precision of distances and ordering of microsatellite markers in consensus linkage maps of chromosomes 1, 3 and 4 from two reciprocal chicken populations using bootstrap sampling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relação K:Ca:Mg na solução nutritiva para produção de minitomate cultivado em substrato

The study was conducted to evaluate six K:Ca:Mg ratios for production of two cultivars of mini tomato grown in substrate, in a greenhouse, during two growing seasons. The experimental design was randomized blocks with four replications and twelve treatments using both cultivars of mini tomato (Sweet Million and Sweet Grape) and six K:Ca:Mg ratios (4:3:1, 6:3:1, 6:4.5:1, 2.7:3:1, 2.7:2:1, 4:2:1) in nutrient solutions. In both experiments, nutrient solutions with the highest concentrations of Mg, (75 mg L-1) and the lowest concentrations of Ca, (150 mg L-1) led to the highest concentrations of those nutrients in plant dry matter. The Sweet Million cultivar had higher yield (1.69 kg plant-1 and 1.52 kg plant-1), number of fruits per plant (227 and 236), and water use efficiency (29.1 kg m-3 and 25.3 kg m-3). However, the Sweet Grape cultivar had fruits of higher mean weight (9.0 g and 8.8 g) and macronutrient content in the leaves. In both crop cycles, the different K:Ca:Mg ratios affected only the macronutrient contents of the mini tomato plants grown in substrate, with no effect on yield and water use efficiency. The first crop cycle showed the highest N, K, Ca and S content.

Availability of nutrients, productive properties, and quality of sunflower ( L.) seeds in acid soils amended with different molar ratios between Ca and Mg

Liming is indispensable in acid soils for amending acidity; however, the technique may alter the cation balance in soil and, consequently, may limit the availability and uptake of nutrients. We aimed to evaluate different molar ratios between calcium (Ca) and magnesium (Mg) on the availability of soil nutrients and their influence on the productive properties of sunflower and seed quality. The experiment was carried out in a greenhouse under two types of contrasting soils and six molar combinations of CaCO3and MgCO3 in amendment of soil acidity to raise base saturation to 70%. After incubation, soil analysis was undertaken to verify the ratios obtained and nutrient availability. Morphological and production variables were analyzed at the end of the experiment, as well as accumulation of nutrients in the achenes and their physiological quality. In spite of equal base saturation between the types of soil, there were differences in the available contents of these cations. The increase in the Ca contents limited the Mg contents to the critical level of the sunflower. This result had a negative influence on the production properties of sunflower and physiological quality. In contrast, there was a compensation of the crop with greater accumulation of nutrients in the achenes under lower yield.

Computer simulation study of collective dynamics in the glass former Ca(NO3)(2)center dot 4H(2)O

Time correlation functions of current fluctuations were calculated by molecular dynamics (MD) simulations in order to investigate sound waves of high wavevectors in the glass-forming liquid Ca(NO3)(2)center dot 4H(2)O. Dispersion curves, omega(k), were obtained for longitudinal (LA) and transverse acoustic (TA) modes, and also for longitudinal optic (LO) modes. Spectra of LA modes calculated by MD simulations were modeled by a viscoelastic model within the memory function framework. The viscoelastic model is used to rationalize the change of slope taking place at k similar to 0.3 angstrom(-1) in the omega(k) curve of acoustic modes. For still larger wavevectors, mixing of acoustic and optic modes is observed. Partial time correlation functions of longitudinal mass currents were calculated separately for the ions and the water molecules. The wavevector dependence of excitation energies of the corresponding partial LA modes indicates the coexistence of a relatively stiff subsystem made of cations and anions, and a softer subsystem made of water molecules. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4751548]

Self-Organizing Maps of Molecular Descriptors for Sesquiterpene Lactones and Their Application to the Chemotaxonomy of the Asteraceae Family

The Asteraceae, one of the largest families among angiosperms, is chemically characterised by the production of sesquiterpene lactones (SLs). A total of 1,111 SLs, which were extracted from 658 species, 161 genera, 63 subtribes and 15 tribes of Asteraceae, were represented and registered in two dimensions in the SISTEMATX, an in-house software system, and were associated with their botanical sources. The respective 11 block of descriptors: Constitutional, Functional groups, BCUT, Atom-centred, 2D autocorrelations, Topological, Geometrical, RDF, 3D-MoRSE, GETAWAY and WHIM were used as input data to separate the botanical occurrences through self-organising maps. Maps that were generated with each descriptor divided the Asteraceae tribes, with total index values between 66.7% and 83.6%. The analysis of the results shows evident similarities among the Heliantheae, Helenieae and Eupatorieae tribes as well as between the Anthemideae and Inuleae tribes. Those observations are in agreement with systematic classifications that were proposed by Bremer, which use mainly morphological and molecular data, therefore chemical markers partially corroborate with these classifications. The results demonstrate that the atom-centred and RDF descriptors can be used as a tool for taxonomic classification in low hierarchical levels, such as tribes. Descriptors obtained through fragments or by the two-dimensional representation of the SL structures were sufficient to obtain significant results, and better results were not achieved by using descriptors derived from three-dimensional representations of SLs. Such models based on physico-chemical properties can project new design SLs, similar structures from literature or even unreported structures in two-dimensional chemical space. Therefore, the generated SOMs can predict the most probable tribe where a biologically active molecule can be found according Bremer classification.

Bourgin-Yang version of the Borsuk-Ulam theorem for Z(pk)-equivariant maps

Let G = Z(pk) be a cyclic group of prime power order and let V and W be orthogonal representations of G with V-G = W-G = W-G = {0}. Let S(V) be the sphere of V and suppose f: S(V) -> W is a G-equivariant mapping. We give an estimate for the dimension of the set f(-1){0} in terms of V and W. This extends the Bourgin-Yang version of the Borsuk-Ulam theorem to this class of groups. Using this estimate, we also estimate the size of the G-coincidences set of a continuous map from S(V) into a real vector space W'.

Interactive quadrangulation with reeb atlases and connectivity textures

Creating high-quality quad meshes from triangulated surfaces is a highly nontrivial task that necessitates consideration of various application specific metrics of quality. In our work, we follow the premise that automatic reconstruction techniques may not generate outputs meeting all the subjective quality expectations of the user. Instead, we put the user at the center of the process by providing a flexible, interactive approach to quadrangulation design. By combining scalar field topology and combinatorial connectivity techniques, we present a new framework, following a coarse to fine design philosophy, which allows for explicit control of the subjective quality criteria on the output quad mesh, at interactive rates. Our quadrangulation framework uses the new notion of Reeb atlas editing, to define with a small amount of interactions a coarse quadrangulation of the model, capturing the main features of the shape, with user prescribed extraordinary vertices and alignment. Fine grain tuning is easily achieved with the notion of connectivity texturing, which allows for additional extraordinary vertices specification and explicit feature alignment, to capture the high-frequency geometries. Experiments demonstrate the interactivity and flexibility of our approach, as well as its ability to generate quad meshes of arbitrary resolution with high-quality statistics, while meeting the user's own subjective requirements.

On the existence of G-equivariant maps

Let G be a compact Lie group. Let X, Y be free G-spaces. In this paper, by using the numerical index i (X; R), under cohomological conditions on the spaces X and Y, we consider the question of the existence of G-equivariant maps f: X -> Y.