The Use of Radiostereometric Analysis in Fractures of the Distal Radius: From Phantom Models to Clinical Application

Radiostereometric analysis (RSA) is a highly accurate method for the measurement of in vivo micromotion of orthopaedic implants. Validation of the RSA method is a prerequisite for performing clinical RSA studies. Only a limited number of studies have utilised the RSA method in the evaluation of migration and inducible micromotion during fracture healing. Volar plate fixation of distal radial fractures has increased in popularity. There is still very little prospective randomised evidence supporting the use of these implants over other treatments. The aim of this study was to investigate the precision, accuracy, and feasibility of using RSA in the evaluation of healing in distal radius fractures treated with a volar fixed-angle plate. A physical phantom model was used to validate the RSA method for simple distal radius fractures. A computer simulation model was then used to validate the RSA method for more complex interfragmentary motion in intra-articular fractures. A separate pre-clinical investigation was performed in order to evaluate the possibility of using novel resorbable markers for RSA. Based on the validation studies, a prospective RSA cohort study of fifteen patients with plated AO type-C distal radius fractures with a 1-year follow-up was performed. RSA was shown to be highly accurate and precise in the measurement of fracture micromotion using both physical and computer simulated models of distal radius fractures. Resorbable RSA markers demonstrated potential for use in RSA. The RSA method was found to have a high clinical precision. The fractures underwent significant translational and rotational migration during the first two weeks after surgery, but not thereafter. Maximal grip caused significant translational and rotational interfragmentary micromotion. This inducible micromotion was detectable up to eighteen weeks, even after the achievement of radiographic union. The application of RSA in the measurement of fracture fragment migration and inducible interfragmentary micromotion in AO type-C distal radius fractures is feasible but technically demanding. RSA may be a unique tool in defining the progress of fracture union.

Equivalence and translation strategies in multilingual thesaurus construction

In the present dissertation, multilingual thesauri were approached as cultural products and the focus was twofold: On the empirical level the focus was placed on the translatability of certain British-English social science indexing terms into the Finnish language and culture at a concept, a term and an indexing term level. On the theoretical level the focus was placed on the aim of translation and on the concept of equivalence. In accordance with modern communicative and dynamic translation theories the interest was on the human dimension. The study is qualitative. In this study, equivalence was understood in a similar way to how dynamic, functional equivalence is commonly understood in translation studies. Translating was seen as a decision-making process, where a translator often has different kinds of possibilities to choose in order to fulfil the function of the translation. Accordingly, and as a starting point for the construction of the empirical part, the function of the source text was considered to be the same or similar to the function of the target text, that is, a functional thesaurus both in source and target context. Further, the study approached the challenges of multilingual thesaurus construction from the perspectives of semantics and pragmatics. In semantic analysis the focus was on what the words conventionally mean and in pragmatics on the ‘invisible’ meaning - or how we recognise what is meant even when it is not actually said (or written). Languages and ideas expressed by languages are created mainly in accordance with expressional needs of the surrounding culture and thesauri were considered to reflect several subcultures and consequently the discourses which represent them. The research material consisted of different kinds of potential discourses: dictionaries, database records, and thesauri, Finnish versus British social science researches, Finnish versus British indexers, simulated indexing tasks with five articles and Finnish versus British thesaurus constructors. In practice, the professional background of the two last mentioned groups was rather similar. It became even more clear that all the material types had their own characteristics, although naturally not entirely separate from each other. It is further noteworthy that the different types and origins of research material were not used to represent true comparison pairs, and that the aim of triangulation of methods and material was to gain a holistic view. The general research questions were: 1. Can differences be found between Finnish and British discourses regarding family roles as thesaurus terms, and if so, what kinds of differences and which are the implications for multilingual thesaurus construction? 2. What is the pragmatic indexing term equivalence? The first question studied how the same topic (family roles) was represented in different contexts and by different users, and further focused on how the possible differences were handled in multilingual thesaurus construction. The second question was based on findings of the previous one, and answered to the final question as to what kinds of factors should be considered when defining translation equivalence in multilingual thesaurus construction. The study used multiple cases and several data collection and analysis methods aiming at theoretical replication and complementarity. The empirical material and analysis consisted of focused interviews (with Finnish and British social scientists, thesaurus constructors and indexers), simulated indexing tasks with Finnish and British indexers, semantic component analysis of dictionary definitions and translations, coword analysis and datasets retrieved in databases, and discourse analysis of thesauri. As a terminological starting point a topic and case family roles was selected. The results were clear: 1) It was possible to identify different discourses. There also existed subdiscourses. For example within the group of social scientists the orientation to qualitative versus quantitative research had an impact on the way they reacted to the studied words and discourses, and indexers placed more emphasis on the information seekers whereas thesaurus constructors approached the construction problems from a more material based solution. The differences between the different specialist groups i.e. the social scientists, the indexers and the thesaurus constructors were often greater than between the different geo-cultural groups i.e. Finnish versus British. The differences occurred as a result of different translation aims, diverging expectations for multilingual thesauri and variety of practices. For multilingual thesaurus construction this means severe challenges. The clearly ambiguous concept of multilingual thesaurus as well as different construction and translation strategies should be considered more precisely in order to shed light on focus and equivalence types, which are clearly not self-evident. The research also revealed the close connection between the aims of multilingual thesauri and the pragmatic indexing term equivalence. 2) The pragmatic indexing term equivalence is very much context-depended. Although thesaurus term equivalence is defined and standardised in the field of library and information science (LIS), it is not understood in one established way and the current LIS tools are inadequate to provide enough analytical tools for both constructing and studying different kinds of multilingual thesauri as well as their indexing term equivalence. The tools provided in translation science were more practical and theoretical, and especially the division of different meanings of a word provided a useful tool in analysing the pragmatic equivalence, which often differs from the ideal model represented in thesaurus construction literature. The study thus showed that the variety of different discourses should be acknowledged, there is a need for operationalisation of new types of multilingual thesauri, and the factors influencing pragmatic indexing term equivalence should be discussed more precisely than is traditionally done.

Esimiehen ydinkompetenssit tuloksen ja työtyytyväisyyden selittäjänä – Case S-market

Työn tarkoituksena on kehittää suorittavalle esimiestasolle työkalu, millä voidaan mitata esimiehen kompetensseja. S-market esimiehen ydinosaamiset työssä jakautuvat kahteen kokonaisuuteen vuorovaikutus- ja ketjuyksikön johtamiseen. Työn tavoitteena on myös tarkastella millä esimiehen ydinosaamisella on merkitystä työtyytyväisyyteen ja yrityksen tulokseen. Tutkimus on kvantitatiivinen ja sen aineisto on verkkokyselylomakkeen avulla kerätystä 129 vastauksesta. Verkkokyselylomakkeen väittämät ovat rakennettu esimiestyön kompetensseista, jotka pohjautuvat tutkielman teoriaan. Verkkokyselyn, työtyytyväisyyden ja tuloksen lukuarvot on analysoitu tilastollisella tulostenkäsittelyohjelmalla, SPSS:llä. Työtyytyväisyystulokset ovat koottu tutkimukseen osallistuneen viidentoista S-marketin työtyytyväisyystutkimuksen tuloksista vuodelta 2008. Tuloksen mittareina tutkielmassa on käytetty samojen S-markettien työtehokkuutta ja toimintakateprosenttia vuodelta 2008. Työn tulokset vahvistivat sen, että esimiestyöllä on suora syy-seuraussuhde työtyytyväisyyteen ja tuloksellisuuteen. Tutkimustuloksien perusteella esimieskäyttämisen vaikutus työtyytyväisyyden kokemiseen on vahva. Hyvällä vuorovaikutusjohtamisella tuloksien perusteella oli vaikutusta työtyytyväisyyteen. Tuloksista kävi ilmi, että työtyytyväisyyteen esimiehen kompetensseista eniten vaikuttivat yksilöllinen huomiointi, tavoitteisiin kannustaminen ja motivointi sekä asiakaslähtöisyys. Tuloksen mittareihin eniten vaikutti tulos- ja tavoitejohtaminen. Tuloksellisuuteen vaikuttavat tutkimuksen mukaan esimiehen jämäkkä ja vaativa tavoitteisiin ohjaava toiminta sekä päätöksenteko ja organisointikyky. Tarkempien ja täsmällisimpien S-market esimiehen kompetenssien löytämiseksi kehitysehdotuksena tutkielmassa on laajemman tutkimusaineiston käsittely neljän faktorin avulla.

Analysis on firm innovation boundaries

Innovation has been widely recognized as an important driver of firm competitiveness, and the firm’s internal research and development (R&D) activities are often considered to have a critical role in innovation activities. Internal R&D is, however, not the source of innovation as firms may tap into knowledge necessary for innovation also through various types of sourcing agreements or by collaborating with other organizations. The objective of this study is to analyze the way firms go about organizing efficiently their innovation boundaries. Within this context, the analysis is focused, firstly, on the relation between innovation boundaries and firm innovation performance and, secondly, on the factors explaining innovation boundary organization. The innovation literature recognizes that the sources of innovation depend on the nature of technology but does not offer a sufficient tool for analyzing innovation boundary options and their efficiency. Thus, this study suggests incorporating insights from transaction cost economics (TCE) complemented with dynamic governance costs and benefits into the analysis. The thesis consists of two parts. The first part introduces the background of the study, research objectives, an overview of the empirical studies, and the general conclusions of the study. The second part is formed of five publications. The overall results firstly indicate that although the relation between firm innovation boundary options is partly industry sector-specific, the firm level search strategies and knowledge transfer capabilities are important for innovation performance independently of the sector. Secondly, the results show that the attributes suggested by TCE alone do not offer a sufficient explanation of innovation boundary selection, especially under conditions of high levels of (radical) uncertainty. Based on the results, the dynamic governance cost and benefit framework complements the static TCE when firm innovation boundaries are scrutinized.

Identifying first graders at risk of reading and writing difficulties : creating a group-based screening tool in kiswahili in Tanzania

Early identification of beginning readers at risk of developing reading and writing difficulties plays an important role in the prevention and provision of appropriate intervention. In Tanzania, as in other countries, there are children in schools who are at risk of developing reading and writing difficulties. Many of these children complete school without being identified and without proper and relevant support. The main language in Tanzania is Kiswahili, a transparent language. Contextually relevant, reliable and valid instruments of identification are needed in Tanzanian schools. This study aimed at the construction and validation of a group-based screening instrument in the Kiswahili language for identifying beginning readers at risk of reading and writing difficulties. In studying the function of the test there was special interest in analyzing the explanatory power of certain contextual factors related to the home and school. Halfway through grade one, 337 children from four purposively selected primary schools in Morogoro municipality were screened with a group test consisting of 7 subscales measuring phonological awareness, word and letter knowledge and spelling. A questionnaire about background factors and the home and school environments related to literacy was also used. The schools were chosen based on performance status (i.e. high, good, average and low performing schools) in order to include variation. For validation, 64 children were chosen from the original sample to take an individual test measuring nonsense word reading, word reading, actual text reading, one-minute reading and writing. School marks from grade one and a follow-up test half way through grade two were also used for validation. The correlations between the results from the group test and the three measures used for validation were very high (.83-.95). Content validity of the group test was established by using items drawn from authorized text books for reading in grade one. Construct validity was analyzed through item analysis and principal component analysis. The difficulty level of most items in both the group test and the follow-up test was good. The items also discriminated well. Principal component analysis revealed one powerful latent dimension (initial literacy factor), accounting for 93% of the variance. This implies that it could be possible to use any set of the subtests of the group test for screening and prediction. The K-Means cluster analysis revealed four clusters: at-risk children, strugglers, readers and good readers. The main concern in this study was with the groups of at-risk children (24%) and strugglers (22%), who need the most assistance. The predictive validity of the group test was analyzed by correlating the measures from the two school years and by cross tabulating grade one and grade two clusters. All the correlations were positive and very high, and 94% of the at-risk children in grade two were already identified in the group test in grade one. The explanatory power of some of the home and school factors was very strong. The number of books at home accounted for 38% of the variance in reading and writing ability measured by the group test. Parents´ reading ability and the support children received at home for schoolwork were also influential factors. Among the studied school factors school attendance had the strongest explanatory power, accounting for 21% of the variance in reading and writing ability. Having been in nursery school was also of importance. Based on the findings in the study a short version of the group test was created. It is suggested for use in the screening processes in grade one aiming at identifying children at risk of reading and writing difficulties in the Tanzanian context. Suggestions for further research as well as for actions for improving the literacy skills of Tanzanian children are presented.

Environmental inFluences on the Adoption of Open Innovation: Analysis of Structural, Institutional and Cultural Impacts

The concept of open innovation has recently gained widespread attention, and is particularly relevant now as many firms endeavouring to implement open innovation, face different sets of challenges associated with managing it. Prior research on open innovation has focused on the internal processes dealing with open innovation implementation and the organizational changes, already taking place or yet required in companies order to succeed in the global open innovation market. Despite the intensive research on open innovation, the question of what influences its adoption by companies in different contexts has not received much attention in studies. To fill this gap, this thesis contribute to the discussion on open innovation influencing factors by bringing in the perspective of environmental impacts, i.e. gathering data on possible sources of external influences, classifying them and testing their systemic impact through conceptual system dynamics simulation model. The insights from data collection and conceptualization in modelling are used to answer the question of how the external environment affects the adoption of open innovation. The thesis research is presented through five research papers reflecting the method triangulation based study (conducted at initial stage as case study, later as quantitative analysis and finally as system dynamics simulation). This multitude of methods was used to collect the possible external influence factors and to assess their impact (on positive/negative scale rather than numerical). The results obtained throughout the thesis research bring valuable insights into understanding of open innovation influencing factors inside a firm’s operating environment, point out the balance required in the system for successful open innovation performance and discover the existence of tipping point of open innovation success when driven by market dynamics and structures. The practical implications on how firms and policy-makers can leverage environment for their potential benefits are offered in the conclusions.

Harvesting and wood transport planning with SNAP III program (Scheduling and Network Analysis Program) in a pine plantation in Southeast Brazil

The objective of this study was to verify the potential of SNAP III (Scheduling and Network Analysis Program) as a support tool for harvesting and wood transport planning in Brazil harvesting subsystem definition and establishment of a compatible route were assessed. Initially, machine operational and production costs were determined in seven subsystems for the study area, and quality indexes, construction and maintenance costs of forest roads were obtained and used as SNAP III program input data. The results showed, that three categories of forest road occurrence were observed in the study area: main, secondary and tertiary which, based on quality index, allowed a medium vehicle speed of about 41, 30 and 24 km/hours and a construction cost of about US$ 5,084.30, US$ 2,275.28 and US$ 1,650.00/km, respectively. The SNAP III program used as a support tool for the planning, was found to have a high potential tool in the harvesting and wood transport planning. The program was capable of defining efficiently, the harvesting subsystem on technical and economical basis, the best wood transport route and the forest road to be used in each period of the horizon planning.

Approaches to Supply Chain Risk Management: Identification, Analysis and Control

Supply chain risk management has emerged as an increasingly important issue in logistics as disruptions in the supply chain have become critical issues for many companies. The scientific literature on the subject is developing and in many respects the understanding of it is still in its infancy. Thus, there is a need for more information in order for scholars and practitioners to understand the causalities and interrelations that characterise the phenomenon. The aim of this dissertation is to narrow this gap by exploring key aspects of supply chain risk management through two maritime supply chains in the immediate region of the Gulf of Finland. The study contributes to the field in three different ways. Firstly, it facilitates the identification of risks on different levels of the supply chain through a systematic analysis of the processes and actors, and of the cognitive barriers that limit the actors’ visibility and their understanding of the operations and the risks involved. There is a clear need to increase collaboration and information exchange in order to improve visibility in the chain. Risk management should be a collaborative effort among the individual actors, aimed at obtaining a holistic picture. Secondly, the study contributes to the literature on risk analysis through the use of systemic frameworks that illustrate the causalities and linkages in the system, thereby making it easier to perceive the vulnerabilities. Thirdly, the study enhances current knowledge of risk control in identifying actor roles, risk visibility and risk controllability as being among the key factors determining risk-management effectiveness against supply-chain vulnerability. This dissertation is divided into two parts. The first part gives a general overview of the relevant literature, the research design and the conclusions of the study, and the second part comprises six research publications. Case-study methodology with systematic combining approach is used, where in-depth interviews, questionnaires and expert panel sessions are the main data collection methods. The study illustrates the current state of risk management in multimodal maritime supply chains, and develops frameworks for further analysis. The results imply that there are major differences between organizations in their ability to execute supply chain risk management. Further collaboration should be considered in order to facilitate the development of systematic and effective management processes.

Sensibility analysis of the pearl model for pesticide leaching in the State of Mato Grosso do Sul, Brazil

For an accurate use of pesticide leaching models it is necessary to assess the sensitivity of input parameters. The aim of this work was to carry out sensitivity analysis of the pesticide leaching model PEARL for contrasting soil types of Dourados river watershed in the state of Mato Grosso do Sul, Brazil. Sensitivity analysis was done by carrying out many simulations with different input parameters and calculating their influence on the output values. The approach used was called one-at-a-time sensitivity analysis, which consists in varying independently input parameters one at a time and keeping all others constant with the standard scenario. Sensitivity analysis was automated using SESAN tool that was linked to the PEARL model. Results have shown that only soil characteristics influenced the simulated water flux resulting in none variation of this variable for scenarios with different pesticides and same soil. All input parameters that showed the greatest sensitivity with regard to leached pesticide are related to soil and pesticide properties. Sensitivity of all input parameters was scenario dependent, confirming the need of using more than one standard scenario for sensitivity analysis of pesticide leaching models.

Implementation of the trauma registry as a tool for quality improvement in trauma care in a brazilian hospital: the first 12 months

ABSTRACTObjective:to analyze the implementation of a trauma registry in a university teaching hospital delivering care under the unified health system (SUS), and its ability to identify points for improvement in the quality of care provided.Methods:the data collection group comprised students from medicine and nursing courses who were holders of FAPESP scholarships (technical training 1) or otherwise, overseen by the coordinators of the project. The itreg (ECO Sistemas-RJ/SBAIT) software was used as the database tool. Several quality "filters" were proposed to select those cases for review in the quality control process.Results:data for 1344 trauma patients were input to the itreg database between March and November 2014. Around 87.0% of cases were blunt trauma patients, 59.6% had RTS>7.0 and 67% ISS<9. Full records were available for 292 cases, which were selected for review in the quality program. The auditing filters most frequently registered were laparotomy four hours after admission and drainage of acute subdural hematomas four hours after admission. Several points for improvement were flagged, such as control of overtriage of patients, the need to reduce the number of negative imaging exams, the development of protocols for achieving central venous access, and management of major TBI.Conclusion: the trauma registry provides a clear picture of the points to be improved in trauma patient care, however, there are specific peculiarities for implementing this tool in the Brazilian milieu.

Construction and validation of a surgical skills assessment tool for general surgery residency program

Objective: To develop and validate an instrument for measuring the acquisition of technical skills in conducting operations of increasing difficulty for use in General Surgery Residency (GSR) programs. Methods: we built a surgical skills assessment tool containing 11 operations in increasing levels of difficulty. For instrument validation we used the face validaity method. Through an electronic survey tool (Survey MonKey(r)) we sent a questionnaire to Full and Emeritus members of the Brazilian College of Surgeons - CBC - all bearers of the CBC Specialist Title. Results: Of the 307 questionnaires sent we received 100 responses. For the analysis of the data collected we used the Cronbach's alpha test. We observed that, in general, the overall alpha presented with values near or greater than 0.70, meaning good consistency to assess their points of interest. Conclusion: The evaluation instrument built was validated and can be used as a method of assessment of technical skill acquisition in the General Surgery Residency programs in Brazil.

Analysis and validation of space averaged drag model for numerical simulations of gas-solid flows in fluidized beds

This thesis presents an approach for formulating and validating a space averaged drag model for coarse mesh simulations of gas-solid flows in fluidized beds using the two-fluid model. Proper modeling for fluid dynamics is central in understanding any industrial multiphase flow. The gas-solid flows in fluidized beds are heterogeneous and usually simulated with the Eulerian description of phases. Such a description requires the usage of fine meshes and small time steps for the proper prediction of its hydrodynamics. Such constraint on the mesh and time step size results in a large number of control volumes and long computational times which are unaffordable for simulations of large scale fluidized beds. If proper closure models are not included, coarse mesh simulations for fluidized beds do not give reasonable results. The coarse mesh simulation fails to resolve the mesoscale structures and results in uniform solids concentration profiles. For a circulating fluidized bed riser, such predicted profiles result in a higher drag force between the gas and solid phase and also overestimated solids mass flux at the outlet. Thus, there is a need to formulate the closure correlations which can accurately predict the hydrodynamics using coarse meshes. This thesis uses the space averaging modeling approach in the formulation of closure models for coarse mesh simulations of the gas-solid flow in fluidized beds using Geldart group B particles. In the analysis of formulating the closure correlation for space averaged drag model, the main parameters for the modeling were found to be the averaging size, solid volume fraction, and distance from the wall. The closure model for the gas-solid drag force was formulated and validated for coarse mesh simulations of the riser, which showed the verification of this modeling approach. Coarse mesh simulations using the corrected drag model resulted in lowered values of solids mass flux. Such an approach is a promising tool in the formulation of appropriate closure models which can be used in coarse mesh simulations of large scale fluidized beds.

Comparison of two commercial kits and two extraction methods for fecal glucocorticoid analysis in ocelots (Leopardus pardalis) submitted to ACTH challenge

The ocelot (Leopardus pardalis) is included in list of wild felid species protected by CITES and is part of conservation strategies that necessarily involve the use of assisted reproduction techniques, which requires practical and minimally invasive techniques of high reproducibility that permit the study of animal reproductive physiology. The objective of this study was to compare and validate two commercial assays: ImmuChem Double Antibody Corticosterone 125I RIA from ICN Biomedicals, Costa Mesa, CA, USA; and Coat-a-Count Cortisol 125I RIA from DPC, Los Angeles, CA, USA, for assessment of fecal glucocorticoid metabolites in ocelots submitted to ACTH (adrenocorticotropic hormone) challenge. Fecal samples were collected from five ocelots kept at the Brazilian Center of Neotropical Felines, Associação Mata Ciliar, São Paulo, Brazil, and one of the animals was chosen as a negative control. The experiment was conducted over a period of 9 days. On day 0, a total dose of 100 IU ACTH was administered intramuscularly. Immediately after collection the samples were stored at 20C in labeled plastic bags. The hormone metabolites were subsequently extracted and assayed using the two commercial kits. Previously it was performed a trial with the DPC kit to check the best extraction method for hormones metabolites. Data were analyzed with the SAS program for Windows V8 and reported as means ± SEM. The Schwarzenberger extraction method was slightly better when compared with the Wasser extraction method (103,334.56 ± 19,010.37ng/g of wet feces and 59,223.61 ± 12,725.36ng/g of wet feces respectively; P=0,0657). The ICN kit detected an increase in glucocorticoid metabolite concentrations in a more reliable manner. Metabolite concentrations (ng/g wet feces) on day 0 and day 1 were 66,956.28 ± 36,786.93 and 92,991.19 ± 28,555.63 for the DPC kit, and 205,483.32 ± 83,811.32 and 814,578.75 ± 292,150.47 for the ICN kit, respectively. The limit of detection for the ICN kit was 7.7 ng/mL for 100% B/Bo (25ng/mL for 88%B/Bo) and for the DPC kit it was 0.2ug/dL for 90.95% B/Bo (1ug/dL for 81.27% B/Bo). In conclusion it was confirmed that the Schwarzenberger extraction method and the ICN kit are superior for extracting and measuring fecal glucocorticoid metabolites in ocelot fecal samples.

Evaluation of follicular lymphoid depletion in the Bursa of Fabricius: an alternative methodology using digital image analysis and artificial neural networks

Fifty Bursa of Fabricius (BF) were examined by conventional optical microscopy and digital images were acquired and processed using Matlab® 6.5 software. The Artificial Neuronal Network (ANN) was generated using Neuroshell® Classifier software and the optical and digital data were compared. The ANN was able to make a comparable classification of digital and optical scores. The use of ANN was able to classify correctly the majority of the follicles, reaching sensibility and specificity of 89% and 96%, respectively. When the follicles were scored and grouped in a binary fashion the sensibility increased to 90% and obtained the maximum value for the specificity of 92%. These results demonstrate that the use of digital image analysis and ANN is a useful tool for the pathological classification of the BF lymphoid depletion. In addition it provides objective results that allow measuring the dimension of the error in the diagnosis and classification therefore making comparison between databases feasible.

Diagnose of the ingestion of Asclepias mellodora St. Hil. by sheep through microhistological analysis of their digestive contents

Asclepias mellodora St. Hil. is a native acute toxic species frequent in the grasslands of the Buenos Aires province, Argentina, whose toxicity had not been assessed until now. This study evaluates the minimal lethal dose of this species for sheep, and the possibility of microscopically recognizing its fragments in gastrointestinal contents as a complementary diagnostic tool in necropsies. Three Frisona sheep (average LW=55±4.5 kg) were dosed via an esophageal tube with each one of the following doses of asclepias: 8.0, 5.0, 2.0 and 0.8 g DM.kg LW-1. Sheep poisoned with the three higher doses died between 10 and 85 h after intoxication, but those receiving the lower dose did not. During necropsies we: 1) determined the dry weight of the contents of rumen+reticulum, omasum+abomasum, and large intestine, 2) estimated the percentages of asclepias fragments by microanalysis correcting for digestion effects on fragment recognition, and 3) calculated the total mass of asclepias in the digestive tract of each animal. For the three higher doses, the mass of asclepias identified in the total ingesta was 12.3±3.4% of the amount supplied, possibly because of the strong diarrhea its ingestion produced. The percentages of asclepias in rumen+reticulum did not differ from the average quantified for the entire tract. The results of this study indicate that the minimal lethal doses of asclepias for sheep is between 2.0 and 0.8g DM·kg LW-1, and that the microhistological analysis of the rumen+reticulum, the easiest region to sample, can be used to confirm the ingestion of this toxic species, although the estimated percentage will be not a good estimator of the ingested percentage.