Normal values for pelvic organ descent in health nulligravid young caucasian women

Translabial ultrasound is increasingly being used for the assessment of women presenting with pelvic floor dysfunction and incontinence (1,2). However, there is little information on normal values for bladder neck descent, with the two available studies disagreeing widely (3,4). No data has so far been published on mobility of the central and posterior compartment which can now also be assessed by ultrasound (5). This study presents normal values for urethral, bladder, cervical and rectal mobility in a cohort of young, stress continent, nulliparous nonpregnant women. Methods 118 nonpregnant nulliparous Caucasian women between 18 and 23 years of age were recruited for an ongoing twin study of pelvic floor function. Translabial ultrasound assessment of pelvic organ mobility was undertaken supine and after bladder emptying (6,7). The best of at least three effective Valsalva manoeuvres was used for evaluation, with no attempts at standardization of Valsalva pressure. Parameters of anterior compartment mobility were obtained by the use of on-screen calipers; cervical and rectal descent were evaluated on printouts. All examinations were carried out under direct supervision of the first author or by personnel trained by him for at least 100 consecutive assessments. Results The median age of participants in this study was 20 (range 18- 23). Mean body mass index was 23 (range 16.9- 36.7). Of 118 women, 2 were completely unable to perform a Valsalva manoeuvre despite repeated efforts at teaching and were excluded from analysis, as were ten women who complained of urinary stress incontinence, leaving 106 datasets. Average measurements for the parameters ‘retrovesical angle at rest’ (RVA-R) and on Valsalva (RVA-S), urethral rotation, bladder neck mobility, cysto-cele descent, cervical descent and descent of the rectal ampulla are given in Table 1.

Preparation and characterisation of biodegradable starch-based nanocomposite materials

Different formulations of biodegradable starch-polyester blend nanocomposite materials have been film blown on a pilot scale film blowing tower. The physical properties of different films have been examined by thermal and mechanical analysis and X-ray diffraction. The results show that the addition of an organoclay (from 0 to 5 wt%) significantly improves both the processing and tensile properties over the original starch blends. Wide angle X-ray diffraction (WAXD) results indicate that the best results were obtained for 30wt% starch blends, and the level of delamination depends on the ratio of starch to polyester and amount of organoclay added. The crystallisation temperature of the nanocomposite blends is significantly lower than the base blend. This is probably due to the platelets inhibiting order, and hence crystallisation, of the starch and polyester. The mechanical and thermal properties of the blends are also sensitive to the way the clay particles are dispersed. (C) 2003 Society of Chemical Industry.

Polyethylene-layered silicate nanocomposites for rotational moulding

A series of polyethylene-layered silicate nanocomposites has been studied as possible new candidates for rotational moulding. Two organically treated layered silicates were melt-compounded into a maleated linear low-density polyethylene host polymer at loadings of 6 and 9%, by weight. The morphology and properties of the nanocomposites were assessed by using dynamic mechanical thermal analysis, parallel-plate rheometry, wide-angle X-ray diffraction and transmission electron microscopy. The sintering behaviour of the nanocomposites was qualitatively assessed via hot-stage microscopy, indicating that the choice of nanofiller will play an important role in terms of producing nanocomposite materials with acceptable processability for rotational moulding. (C) 2003 Society of Chemical Industry.

Simultaneous observations of ionospheric quasiperiodic scintillations from short and long meridional baselines using VHF transmissions from transit satellites

For the first time it was possible to observe regular quasiperiodic scintillations (QPS) in VHF radio-satellite transmissions from orbiting satellites simultaneously at short (2.1 km) and long (121 km) meridional baselines in the vicinity of a typical mid-latitude station (Brisbane; 27.5degreesS and 152.9degreesE geog. and 35.6degrees invar.lat.), using three sites (St. Lucia-S, Taringa-T in Brisbane and Boreen Pt.-B, north of Brisbane). A few pronounced quasiperiodic (QP) events were recorded showing unambiguous regular structures at the sites which made it possible to deduce a time displacement of the regular fading minimum at S, T and B. The QP structure is highly dependent on the geometry of the ray-path from a satellite to the observer which is manifested as a change of a QP event from symmetrical to non-symmetrical for stations separated by 2.1 km, and to a radical change in the structure of the event over a distance of 121 km. It is suggested the short-duration intense QP events are due to a Fresnel diffraction (or a reflection mechanism) of radio-satellite signals by a single ionospheric irregularity in a form of an ellipsoid with a large ionization gradient along the major axis. The structure of a QP event depends on the angle of viewing of the irregular blob from a radio-satellite. In view of this it is suggested that the reported variety of the ionization formation, responsible for different types of QPS, is only apparent but not real. (C) 2003 Elsevier Science Ltd. All rights reserved.

Cross-linking of PFA by electron beam irradiation

The effect of electron beam radiation on a perfluoroalkoxy (PFA) resin was examined using solid-state high-speed magic angle spinning F-19 NMR spectroscopy and FT-IR spectroscopy. Samples were prepared for analysis by subjecting them to electron beam radiation in the dose range 0.5-2.0 MGy at 633 K, which is above the crystalline melting temperature. The new structures were identified and include new saturated chain ends, short and long branches, unsaturated groups, and cross-links. The radiation chemical yield (G value) of new long branch points was greater than the G value of new chain ends, suggesting that cross-linking is the net radiolytic process. This conclusion was supported by an observed decrease in the crystallinity and an increase in the optical clarity of the polymer.

Pseudo-randomness of round-off errors in discretized linear maps on the plane

We analyze the sequences of round-off errors of the orbits of a discretized planar rotation, from a probabilistic angle. It was shown [Bosio & Vivaldi, 2000] that for a dense set of parameters, the discretized map can be embedded into an expanding p-adic dynamical system, which serves as a source of deterministic randomness. For each parameter value, these systems can generate infinitely many distinct pseudo-random sequences over a finite alphabet, whose average period is conjectured to grow exponentially with the bit-length of the initial condition (the seed). We study some properties of these symbolic sequences, deriving a central limit theorem for the deviations between round-off and exact orbits, and obtain bounds concerning repetitions of words. We also explore some asymptotic problems computationally, verifying, among other things, that the occurrence of words of a given length is consistent with that of an abstract Bernoulli sequence.

Meritocracia ?? brasileira: o que ?? desempenho no Brasil?

O artigo trata da quest??o da meritocracia e da avalia????o de desempenho no setor p??blico brasileiro e na sociedade sob uma perspectiva mais ampla, enfatizando a diferen??a entre a exist??ncia de sistemas meritocr??ticos formais e sua legitimidade social. Para a autora, o cerne desta discuss??o passa pelo entendimento da diferen??a entre sistemas meritocr??ticos e ideologia da meritocracia e pela compreens??o dos pressupostos culturais que est??o informando este debate. O artigo situa a quest??o da meritocracia em contextos mais amplos, como a teoria da administra????o, a perspectiva intercultural e a ??tica hist??ricosociol??gica, sem perder de vista as especificidades da sociedade brasileira.

Efeito da geometria dos dentes da serra de fita na produção de madeira serrada de eucalipto

O objetivo deste trabalho foi determinar o efeito dos parâmetros que compõem os dentes de serra de fita na produção e qualidade da madeira serrada de eucalipto. Analisou-se o efeito de dois passos de dentes (57,15 mm e passo variado: 50,8 - 50,8 - 50,39 - 50,71 - 60,03 - 60,35 mm), de dois ângulos de ataque (26 e 270) e de duas alturas (22 e 25,4 mm) em duas classes diamétricas (25 a 34 cm e 35 e 47 cm) de clones de híbridos Eucalyptus grandis x Eucalyptus urophylla com 15 anos de idade. Não houve ganho de qualidade quando se trabalhou com passo variado. As lâminas de serra que possuíam ângulo de ataque de 270 e passo único tanto com altura do dente de 22 mm quanto com 25,4 mm geraram desvios acima da espessura-meta. A menor variação em torno da espessura-meta foi obtida quando se utilizaram lâminas de serra de ângulo de ataque de 270 e altura do dente de 25,4 mm. O maior desvio ocorreu quando o desdobro foi efetuado com passo variado e ângulo de ataque de 260. A utilização de passo variado, de modo geral, foi o que apresentou maiores desvios na espessura das tábuas em relação à espessura desejada.

Alterações microclimáticas causadas pelo uso de tela plástica

Com o objetivo de caracterizar as alterações microclimáticas provocadas pelo uso de tela plástica na agricultura, foi desenvolvido um experimento com alface, em área de cultivo agrícola, em Alegre - ES (latitude 20º45 S, longitude 41º28 W e altitude 150 m), no período de setembro a dezembro de 1996. Foram utilizados sombreamentos de 0; 30; 50, e 70%, segundo especificação comercial. Os resultados mostraram que a tela com especificação comercial de 50% de sombreamento provocou uma atenuação média de 41% na radiação solar global, ocorrendo, no entanto, uma flutuação significativa ao longo do dia em função do movimento aparente do sol. A cobertura com a tela plástica não provocou alterações significativas da temperatura e umidade relativa do ar. Em relação à temperatura do solo, foi possível verificar uma atenuação com o aumento do sombreamento.

O estranhamente familiar na obra de Attilio Colnago

Esta dissertação investiga o unheimlich – em português, 'estranhamente familiar' -, conceito psicanalítico desenvolvido por Sigmund Freud, em obras que fazem parte de 4 (quatro) séries do trabalho do artista plástico Attilio Colnago: "Do Retorno às Meias Verdades", “10 + 1 Perigosas Maneiras de Amar", "Minas das Liberdades Gerais" e "Diálogos com a Paixão". Aproxima as obras do artista – já tão conhecidas por seus aspectos principais tais como a presença da figura humana, os espaços interiores, o sagrado em um contraponto com o profano, e as memórias – do estranhamente familiar. Para tanto, pesquisou-se a bibliografia ligada ao tema, que teve como ponto de partida o ensaio de Freud de 1919, "Das Unheimliche", – traduzido para o português como "O Estranho" – e prosseguiu-se através de escritos de outros autores que se interessam pelo conceito de estranhamente familiar, trazendo-o para a contemporaneidade e associando-o a outras áreas do conhecimento, entre eles Nicholas Royle, Anneleen Masschelein e Anthony Vidler. Com base na teoria estudada foram selecionadas, dentre as séries escolhidas, as obras mais significativas em relação ao tema para serem analisadas. Busca-se desvendar e analisar um lado ainda não investigado da obra do artista e ao mesmo tempo mostrar a importância de se estudar o conceito de estranhamente familiar no campo das artes plásticas.

Territórios ocupados : uma abordagem geográfica do conflito israelo-palestino através dos quadrinhos de Joe Sacco

O estudo trata da dimensão territorial do conflito israelo-palestino a partir do jornalismo em quadrinhos produzidos por Joe Sacco. Para isso, procura, preliminarmente, desenvolver uma abordagem da representação espacial nos quadrinhos através de sua linguagem visual e textual, que evidencia uma percepção espacial e expressa um conjunto de significados a partir das ações que unem os personagens ao lugar. A partir desse quadro de interpretação, o presente estudo focaliza, através da análise das obras de Joe Sacco, o conflito árabe-israelense para entender os territórios palestinos ocupados como um volume político que retrata a perda de soberania política dos palestinos em sentido amplo. Esse enfoque se volta para uma reflexão a respeito do dia a dia dos palestinos através dos quadrinhos considerando o cotidiano da ocupação e sua dimensão espacial (ou seja, um conteúdo que remete ao território, uma vez que apresenta todo um conjunto de significados que evocam um sentido territorial). Assim, a pesquisa objetiva entender os territórios palestinos ocupados, procurando evidenciar em que medida os quadrinhos de Joe Sacco disponibilizam elementos para a pesquisa em Geografia, na medida em que expressam, sugere-se, uma geograficidade. Tal enfoque, que recorre ao escopo conceitual da Geografia – e notadamente ao conceito de território e seus múltiplos –, mediatizando-os através do recurso às obras de Joe Sacco, possibilita, sugere-se, um ângulo de abordagem peculiar sobre o território em locais de conflito, na medida em que, através dele, torna-se possível observar as formas de controle e precarização territorial dos palestinos em sua formação espaço-territorial.

Modeling Carbon Nanotube Electrical Properties in CNT/Polymer Composites

In this work it is demonstrated that the capacitance between two cylinders increases with the rotation angle and it has a fundamental influence on the composite dielectric constant. The dielectric constant is lower for nematic materials than for isotropic ones and this can be attributed to the effect of the filler alignment in the capacitance. The effect of aspect ratio in the conductivity is also studied in this work. Finally, based on previous work and by comparing to results from the literature it is found that the electrical conductivity in this type of composites is due to hopping between nearest fillers resulting in a weak disorder regime that is similar to the single junction expression.

Automatic modeling of an orthotic bracing for nonoperative correction of PectusCarinatum

Pectus Carinatum is a deformity of the chest wall, characterized by an anterior protrusion of the sternum, often corrected surgically due to cosmetic motivation. This work presents an alternative approach to the current open surgery option, proposing a novel technique based on a personalized orthosis. Two different processes for the orthosis’ personalization are presented. One based on a 3D laser scan of the patient chest, followed by the reconstruction of the thoracic wall mesh using a radial basis function, and a second one, based on a computer tomography scan followed by a neighbouring cells algorithm. The axial position where the orthosis is to be located is automatically calculated using a Ray-Triangle intersection method, whose outcome is input to a pseudo Kochenek interpolating spline method to define the orthosis curvature. Results show that no significant differences exist between the patient chest physiognomy and the curvature angle and size of the orthosis, allowing a better cosmetic outcome and less initial discomfort

Neural Electrode Array Based on Aluminum: Fabrication and Characterization

A unique neural electrode design is proposed with 3 mm long shafts made from an aluminum-based substrate. The electrode is composed by 100 individualized shafts in a 10 × 10 matrix, in which each aluminum shafts are precisely machined via dicing-saw cutting programs. The result is a bulk structure of aluminum with 65 ° angle sharp tips. Each electrode tip is covered by an iridium oxide thin film layer (ionic transducer) via pulsed sputtering, that provides a stable and a reversible behavior for recording/stimulation purposes, a 40 mC/cm2 charge capacity and a 145 Ω impedance in a wide frequency range of interest (10 Hz-100 kHz). Because of the non-biocompatibility issue that characterizes aluminum, an anodization process is performed that forms an aluminum oxide layer around the aluminum substrate. The result is a passivation layer fully biocompatible that furthermore, enhances the mechanical properties by increasing the robustness of the electrode. For a successful electrode insertion, a 1.1 N load is required. The resultant electrode is a feasible alternative to silicon-based electrode solutions, avoiding the complexity of its fabrication methods and limitations, and increasing the electrode performance.