Quantitative analysis of collagen and elastic fibers in the transversalis fascia in direct and indirect inguinal hernia

PURPOSE: Our previous studies demonstrated structural and quantitative age-related changes of the elastic fibers in transversalis fascia, which may play a role in inguinal hernia formation. To verify whether there were differences in the extracellular matrix between direct and indirect inguinal hernia, we studied the amount of collagen and elastic fibers in the transversalis fascia of 36 male patients with indirect inguinal hernia and 21 with direct inguinal hernia. MATERIAL AND METHODS: Transversalis fascia fragments were obtained during surgical intervention and underwent histological quantitative analysis of collagen by colorimetry and analysis of elastic fibers by histomorphometry. RESULTS: We demonstrated significantly lower amounts of collagen and higher amounts of elastic fibers in transversalis fascia from patients with direct inguinal hernia compared to indirect inguinal hernia patients. The transversalis fascia from direct inguinal hernia patients showed structural changes of the mature and elaunin elastic fibers, which are responsible for elasticity, and lower density of oxytalan elastic fibers, which are responsible for resistance. These changes promoted loss of resiliency of the transversalis fascia. CONCLUSION: These results improve our understanding of the participation of the extracellular matrix in the genesis of direct inguinal hernia, suggesting a relationship with genetic defects of the elastic fiber and collagen synthesis.

Effects of continuous versus bolus infusion of enteral nutrition in critical patients

PURPOSE: Enteral alimentation is the preferred modality of support in critical patients who have acceptable digestive function and are unable to eat orally, but the advantages of continuous versus intermittent administration are surrounded by controversy. With the purpose of identifying the benefits and complications of each technique, a prospective controlled study with matched subjects was conducted. PATIENTS AND METHODS: Twenty-eight consecutive candidates for enteral feeding were divided into 2 groups (n = 14 each) that were matched for diagnosis and APACHE II score. A commercial immune-stimulating polymeric diet was administered via nasogastric tube by electronic pump in the proportion of 25 kcal/kg/day, either as a 1-hour bolus every 3 hours (Group I), or continuously for 24 hours (Group II), over a 3-day period. Anthropometrics, biochemical measurements, recording of administered drugs and other therapies, thorax X-ray, measurement of abdominal circumference, monitoring of gastric residue, and clinical and nutritional assessments were performed at least once daily. The principal measured outcomes of this protocol were frequency of abdominal distention and pulmonary aspiration, and efficacy in supplying the desired amount of nutrients. RESULTS: Nearly half of the total population (46.4%) exhibited high gastric residues on at least 1 occasion, but only 1 confirmed episode of pulmonary aspiration occurred (3.6%). Both groups displayed a moderate number of complications, without differences. Food input during the first day was greater in Group II (approximately 20% difference), but by the third day, both groups displayed similarly small deficits in total furnished volume of about 10%, when compared with the prescribed diet. CONCLUSIONS: Both administration modalities permitted practical and effective administration of the diet with frequent registered abnormalities but few clinically significant problems. The two groups were similar in this regard, without statistical differences, probably because of meticulous technique, careful monitoring, strict patient matching, and conservative amounts of diet employed in both situations. Further studies with additional populations, diagnostic groups, and dietetic prescriptions should be performed in order to elucidate the differences between these commonly used feeding modalities.

Analysis of a controversial decision process: the case of the pumped hydro storage power plant Atdorf in Germany

Based on the report for the unit “Métodos Interactivos de Participação e Decisão A” (Interactive methods of participation and decision A), coordinated by Prof. Lia Maldonado Teles de Vasconcelos and Prof. Nuno Miguel Ribeiro Videira Costa. This unit was provided for the PhD Program in Technology Assessment in 2015/2016.

Use of nonradioactive labeling to detect large gene rearrangements in 21-hydroxylase deficiency

PURPOSE: To establish the Southern blotting technique using hybridization with a nonradioactive probe to detect large rearrangements of CYP21A2 in a Brazilian cohort with congenital adrenal hyperplasia due to 21-hydroxylase deficiency (CAH-21OH). METHOD: We studied 42 patients, 2 of them related, comprising 80 non-related alleles. DNA samples were obtained from peripheral blood, digested by restriction enzyme Taq I, submitted to Southern blotting and hybridized with biotin-labeled probes. RESULTS: This method was shown to be reliable with results similar to the radioactive-labeling method. We found CYP21A2 deletion (2.5%), large gene conversion (8.8%), CYP21AP deletion (3.8%), and CYP21A1P duplication (6.3%). These frequencies were similar to those found in our previous study in which a large number of cases were studied. Good hybridization patterns were achieved with a smaller amount of DNA (5 mug), and fragment signs were observed after 5 minutes to 1 hour of exposure. CONCLUSIONS: We established a non-radioactive (biotin) Southern blot/hybridization methodology for CYP21A2 large rearrangements with good results. Despite being more arduous, this technique is faster, requires a smaller amount of DNA, and most importantly, avoids problems with the use of radioactivity.

On the isotopic composition of precipitation in tropical stations (*).

Some of the trends and characteristics of the isotopic composition oh precipitation in tropical stations are discussed. Stations in small Pacific islands show a variation with latitude, with lower 8-values between 15°N and 1S°S and higher values at higher. Inland stations are depleted in heavy isotopes with respect to coastal stations but sometimes this continental effect is rather complex, as f,or instance in África. Mean monthly 8-values show a remarkable correlation with the amount of precipitation, but the slope variations do not show a clear dependence on the mean long term 8-value,as should be expected theoretically. In Southern American stations the seasonal variations of the meanmonthly 5-values are correlated and they are greater in inland stations due to con-tinentaly. The possible effects of recycling of water vapour by evapotranspiration are also discussed.

New pteridophyte records for the territory of Amapá, Brazil.

Eighteen Pteridophyte taxa in 15 genera are reported as new for the Territory of Amapá, Brazil. The collections area a result of a recent Projeto Flora Amazônica/Programa Flora expedition to that region, and update previous lists of taxa for Amapá.In 1975, Tryon and Conant publised a checklist of the ferns of the Brazilian Amazônia reporting 84 taxa for the Territory of Amapá. The paucity of records for Amapá reflects, at least in part, the amount of botanical exploration. The most complete list of taxa occurring in the Territory is an unpublished list of collection compiled by J. M. Pires. This compilation reports 118 taxas for the Territory of Amapá. The following list is intended to update both the Pires compilation an the Tryon and Conant checklist for the Territor. These records are the result of a Projeto Flora Amazônica/Programa Flora expedition to the region in the latter part of 1979. Species were included in this list is not reportes in the compilation of colections for Amapá, or listed as specifically occurrin in Amapá in the monographs and revisions consulted for listed as specifically occurring in Amapá in the monograohs and revisions consulted for identification (Evans, 1969; Kramer, 1957, 1978; de la Sota, 1960; Lellinger, 1972; Maxon & Morton, 1938; Scamman, 1960, Smith, 1971; Tryon, 1941, 1964).This list reports 18 taxa in 15 genera, increasing the number of taxa in Amapá from the 118 listed by Pires to 136. Most of the taxa reported here might have been predicted to occur in Amapá on the basis of their distribution records for surrounding regions.Each species is followed by a collection number. The collection number is that of D. F. Austin, C. E. Nauman, R. S. Secco, C. Rosario, and M. R. Santos except for four collections in which R. S. Secco was absent and B. V. Rabelo was present, and these are indicated after the collection number. Specimens are deposited in the herbaria of the Museu Paraense Emílio Goeldi, Belém, Brazil and the United States. The family system is essentially that used by Tyron and Conant.

The role of arl13b in cilia length regulation and in zebrafish development

RESUMO: Arl13b é uma importante proteína ciliar, presente em cílios primários e cílios móveis. Ratinhos mutantes para Arl13b têm comprimento dos cílios reduzido e defeitos nos B-túbulos dos cílios. Como consequência destes fenótipos, deficiências na Arl13b originam, em modelos animais, várias doenças congénitas, incluindo problemas no estabelecimento do eixo esquerda-direita, malformações cerebrais e deformações corporais. Nos seres humanos, deficiências na Arl13b levam a uma doença crónica congénita chamada Síndrome de Joubert. Por outro lado, a sobreexpressão de Arl13b origina cílios mais longos, no entanto existe uma ausência da caracterização dos fenótipos celulares e durante o desenvolvimento embrionário. Neste trabalho, quisemos explorar o efeito da sobre-expressão de Arl13b em embriões de peixezebra. Descobrimos que, ao nível ciliar, a sobre-expressão de Arl13b nas células aumenta o comprimento ciliar em cílios primários e móveis, no entanto, a esses cílios falta adequada acetilação da alfa-tubulina no citoesqueleto feito por microtúbulos. Os nossos resultados mostraram que esse efeito é específico de Arl13b sobre-expressão e quando se manipularam as enzimas responsáveis pela acetilação (Mec17) e pela de-acetilação (HDAC6) encontrámos uma sinergia potencial com ambas. Testámos ainda, que o aumento no comprimento ciliar não estava causalmente relacionado com a falta de acetilação, ou seja, os cílios com menos acetilação não eram necessariamente os mais longos. Também mostrámos que a sobre-expressão de Arl13b é capaz de restaurar o comprimento dos cílios em mutantes com cílios curtos e como isso pode ser explorado para um futuro potencial papel terapêutico para Arl13b. Em seguida, foi avaliado o impacto do aumento da quantidade de Arl13b no desenvolvimento embrionário do peixe-zebra. Observou-se que a sobre-expressão de Arl13b apresentava fenótipos muito fracos, quando comparados com a perda de função dos mutantes de Arl13b. Focados no inesperado fenótipo leve no estabelecimento do eixo esquerda-direita abordámos a questão através do estabelecimento de uma colaboração com matemáticos, descobrimos que os cílios mais longos que potencialmente têm a capacidade de movimentar mais fluido são atenuados por amplitudes de batimento menores, e, como resultado, estes longos cílios não prejudicam o movimento do fluido e consequentemente não afetam o estabelecimento dos padrões de esquerda-direita. Sugerimos assim que a Arl13b é um regulador chave, do comprimento ciliar. Descobrimos uma nova interação com as enzimas de acetilação/de-acetilação e levantamos novas hipóteses quanto aos mecanismos moleculares da função da Arl13b. Propomos um novo modelo para o mecanismo molecular da Arl13b na regulação do comprimento dos cílios onde podemos integrar os nossos resultados com os relatados na literatura. Este trabalho adiciona mais conhecimento para o mecanismo de ação da Arl13b e, portanto, fornece uma importante contribuição para o campo da investigação em cílios.---------------------------------------------------------------------------------------------------------------------- ABSTRACT: Arl13b is an important ciliary protein, present in primary and motile cilia. arl13b-/- mouse mutants have reduced cilia length and cilia B-tubule defects. As a consequence of these phenotypes, Arl13b loss of function animal models suffer from several congenital disorders including left-right problems, brain malformations and body deformations. In humans Arl13b depletion leads to a congenital chronic disease called Joubert Syndrome. On the other hand, overexpressing Arl13b leads to longer cilia but the characterization of the cellular and developmental phenotypes was missing. In this work we explore the effect of Arl13b overexpression in zebrafish embryos. We found that, at the ciliary level, Arl13b overexpression from 1 cell stage produces longer primary and motile cilia, but these cilia lack proper alpha tubulin acetylation of their microtubule cytoskeleton. Our results showed that this effect is specific from Arl13b overexpression and when we manipulated the enzymes responsible for acetylation, Mec17, and de-acetylation, HDAC6, we found a potential synergy of both mec17 knockdown and HDAC6 activity with Arl13b overexpression. We tested that the ciliary increase in length was not causally related to the lack of acetylation, meaning the more de-acetylated cilia were not necessarily the longer ones. We also showed that Arl13b overexpression is able to restore cilia length in short cilia mutants and how that may be explored to a potential future therapeutic role for Arl13b. Next, we evaluated the impact of increasing the amount of Arl13b in zebrafish embryonic development. We observed that Arl13b overexpression presented very mild phenotypes when compared to the loss of function mutants. We focused on the unexpected left-right mild phenotype and by establishing a mathematical modeling collaboration, we found out that the longer cilia generated force was attenuated by smaller beating amplitudes, and as a result, these long cilia were not impairing the cilia generated flow and the establishment of left-right patterning. We suggest that Arl13b is one key cilia length regulator. We disclosed a novel interaction with the acetylation / de-acetylation enzymes and raised new hypothesis as to the mechanisms of Arl13b function. We propose a new model for the Arl13b molecular mechanism of cilia length regulation where we integrate our findings with those reported in the literature. This work adds more knowledge to the Arl13b mechanism of action and therefore provides an important contribution to the cilia research field.

The enchained potential of the local food market

There is a rising demand for local food which traveled only short distances and is marketed directly by the producer. With growing importance of local food also the amount of literature in this field increased. Yet, literature is lacking to examine the challenges and burdens consumers face while trying to purchase local food. Evidence is shown that a gap exists between the intention of consumers who would like to purchase local food and their actual behavior. However, reasons for this gap are only discovered as byproducts of other research objectives. Consequently, this study investigates the specific reasons for the intention-behavior gap of consumers in the local food market. The study makes use of semi-structured face-to-face interviews with rural and urban respondents. The interviews are analyzed by qualitative content analysis based on Elo and Kyngäs (2008). Revealed key drivers for the intention-behavior gap are (1) the lack of awareness where to purchase local food products, (2) the limited reachability of local food producers, (3) the assortment of the local producer in regard to size and composition and (4) the lack in transparency of the prices of local food. Consequently, it is the producers turn to eliminate the revealed barriers by proactively bringing their products closer to the consumer.

Production of mexican brown macroalgae fucoidan and fucosidases under an integral green technology bioproceses by the biorefinery concept

Marine ecosystem can be considered a rather exploited source of natural substances with enormous bioactive potential. In Mexico macro-algae study remain forgotten for research and economic purposes besides the high amount of this resource along the west and east coast. For that reason the Bioferinery Group of the Autonomous University of Coahuila, have been studying the biorefinery concept in order to recover high value byproducts of Mexican brown macro-algae including polysaccharides and enzymes to be applied in food, pharmaceutical and energy industry. Brown macroalgae are an important source of fucoidan, alginate and laminarin which comprise a complex group of macromolecules with a wide range of important biological properties such as anticoagulant, antioxidant, antitumoral and antiviral and also as rich source of fermentable sugars for enzymes production. Additionally, specific enzymes able to degrade algae matrix (fucosidases, sulfatases, aliginases, etc) are important tools to establish structural characteristics and biological functions of these polysaccharides. The aims of the present work were the integral study of bioprocess for macroalgae biomass exploitation by the use of green technologies as hydrothermal extraction and solid state fermentation in order to produce polysaccharides and enzymes (fucoidan and fucoidan hydrolytic enzymes). This work comprises the use of the different bioprocess phases in order to produce high value products with lower time and wastes.

Synthesis and characterization of novel 4H-pyran-4-ylidene indole-based heterocyclic systems for several optical applications

The development of organic materials displaying high two-photon absorption (TPA) has attracted much attention in recent years due to a variety of potential applications in photonics and optoelectronics, such as three-dimensional optical data storage, fluorescence imaging, two-photon microscopy, optical limiting, microfabrication, photodynamic therapy, upconverted lasing, etc. The most frequently employed structural motifs for TPA materials are donor–pi bridge–acceptor (D–pi–A) dipoles, donor–pi bridge–donor (D–pi–D) and acceptor–pi bridge-acceptor (A–pi–A) quadrupoles, octupoles, etc. In this work we present the synthesis and photophysical characterization of quadrupolar heterocyclic systems with potential applications in materials and biological sciences as TPA chromophores. Indole is a versatile building block for the synthesis of heterocyclic systems for several optoelectronic applications (chemosensors, nonlinear optical, OLEDs) due to its photophysical properties and donor electron ability and 4H-pyran-4-ylidene fragment is frequently used for the synthesis of red light-emitting materials. On the other hand, 2-(2,6-dimethyl-4H-pyran-4-ylidene)malononitrile (1) and 1,3-diethyl-dihydro-5-(2,6-dimethyl-4H-pyran-4-ylidene)-2-thiobarbituric (2) units are usually used as strong acceptor moieties for the preparation of π-conjugated systems of the push-pull type. These building blocks were prepared by Knoevenagel condensation of the corresponding ketone precursor with malononitrile or 1,3-diethyl-dihydro-2-thiobarbituric acid. The new quadrupolar 4H-pyran-4-ylidene fluorophores (3) derived from indole were prepared through condensation of 5-methyl-1H-indole-3-carbaldehyde with the acceptor precursors 1 and 2, in the presence of a catalytical amount of piperidine. The new compounds were characterized by the usual spectroscopic techniques (UV-vis., FT-IR and multinuclear NMR - 1H, 13C).

The impact of poor power quality in solar photovoltaic microgeneration: technical problems and losses of revenue

This paper presents a critical and quantitative analysis of the influence of the Power Quality in grid connected solar photovoltaic microgeneration installations. First are introduced the main regulations and legislation related with the solar photovoltaic microgeneration, in Portugal and Europe. Next are presented Power Quality monitoring results obtained from two residential solar photovoltaic installations located in the north of Portugal, and is explained how the Power Quality events affect the operation of these installations. Afterwards, it is described a methodology to estimate the energy production losses and the impact in the revenue caused by the abnormal operation of the electrical installation. This is done by comparing the amount of energy that was injected into the power grid with the theoretical value of energy that could be injected in normal conditions. The performed analysis shows that Power Quality severally affects the solar photovoltaic installations operation. The losses of revenue in the two monitored installations M1 and M2 are estimated in about 27% and 22%, respectively.

On the occurrence of cyanolipids In Paullinia carpopodea cambess And P. cupana Kunth seed oils

Paullinia carpopodea seed oil contains 70% type Icyanolipids with cyanogenetic properties, as proven by chemical and spectrometric techniques. P. cupana seed oil also contains cyanogenic type I cyanolipids, according to its 1Ή-NMR spectrum. The existing controversy in the literature about the presence and/or type of cyanolipids in P. cupana seed oil is probably due to the low amount of these compounds (0.2%) in the seeds.

Sustainable mortars with incorporation of microencapsulated phase change materials

The construction industry is responsible for high energy and raw materials consumption. Thus, it is important to minimize the high energy consumption by taking advantage of renewable energy sources and reusing industrial waste, decreasing the extraction of natural materials. The mortars with incorporation of phase change materials (PCM) have the ability to regulate the temperature inside buildings, contributing to the thermal comfort and reduction of the use of heating and cooling equipment, using only the energy supplied by the sun. The simultaneous incorporation of PCM and fly ash (FA) can reduce the energy consumption and the amount of materials landfilled. However, the addition of these materials in mortars modifies its characteristics. The main purpose of this study was the production and characterization in the fresh and hardened state of mortars with incorporation of different contents of PCM and FA. The binders studied were aerial lime, hydraulic lime, gypsum and cement. The proportion of PCM studied was 0%, 20%, 40% and 60% of the mass of the sand. The content of fly ash added to the mortars was 0%, 20%, 40% and 60% of the mass of the binder. It was possible to observe that the incorporation of PCM and fly ash in mortars caused differences in properties such as workability, microstructure, water absorption, compressive strength, flexural strength and adhesion.

Recycled asphalt mixtures produced with high percentage of different waste materials

The use of sustainable solutions in construction is not just an option, but is increasingly becoming a need of the Society. Thus, nowadays the recycling of waste materials is a growing technology that needs to be continuously improved, namely by researching new solutions for waste valorisation and by increasing the amount of wastes reused. In the paving industry, the reuse of reclaimed asphalt (RA) is becoming common practice, but needs further research work. Thus, this study aims to increase the incorporation of RA and other waste materials in the production of recycled asphalt mixtures in order to improve their mechanical, environmental and economic performance. Recycled mixtures with 50% RA were analysed in this study, including: i) RA selection, preparation and characterization; ii) incorporation of other waste materials as binder additives or modifiers, like used motor oil (UMO) and waste high density polyethylene (HDPE); iii) production of different mixtures (without additives; with UMO; with UMO and HDPE) and comparison of their performance in order to assess the main advantages of each solution. With this study it was concluded that up to 7.5 % of UMO and 4.0 % of HDPE can be used in a new modified binder for asphalt mixtures with 50 % of RA, which have excellent properties concerning the rutting with WTS = 0.02 mm/103 cycles, the fatigue resistance with ε6 = 160.4, and water sensitivity with an ITSR of 81.9 %.

Tensile creep of a structural epoxy adhesive: experimental and analytical characterization

Epoxy adhesives are nowadays being extensively used in Civil Engineering applications, mostly in the scope of the rehabilitation of reinforced concrete (RC) structures. In this context, epoxy adhesives are used to provide adequate stress transference from fibre reinforced polymers (FRP) to the surrounding concrete substrate. Most recently, the possibility of using prestressed FRPs bonded with these epoxy adhesives is also being explored in order to maximize the potentialities of this strengthening approach. In this context, the understanding of the long term behaviour of the involved materials becomes essential. Even when non-prestressed FRPs are used a certain amount of stress is permanently applied on the adhesive interface during the serviceability conditions of the strengthened structure, and the creep of the adhesive may cause a continuous variation in the deformational response of the element. In this context, this paper presents a study aiming to experimentally characterize the tensile creep behaviour of an epoxy-based adhesive currently used in the strengthening of concrete structures with carbon FRP (CFRP) systems. To analytically describe the tensile creep behaviour, the modified Burgers model was fitted to the experimental creep curves, and the obtained results revealed that this model is capable of predicting with very good accuracy the long term behaviour of this material up to a sustained stress level of 60% of the adhesive’s tensile strength.