Comparative Analysis of Alternative Hybrid Systems for Automotive Applications

The main objective of this work was to investigate the impact of different hybridization concepts and levels of hybridization on fuel economy of a standard road vehicle where both conventional and non-conventional hybrid architectures are treated exactly in the same way from the point of view of overall energy flow optimization. Hybrid component models were developed and presented in detail as well as the simulations results mainly for NEDC cycle. The analysis was performed on four different parallel hybrid powertrain concepts: Hybrid Electric Vehicle (HEV), High Speed Flywheel Hybrid Vehicle (HSF-HV), Hydraulic Hybrid Vehicle (HHV) and Pneumatic Hybrid Vehicle (PHV). In order to perform equitable analysis of different hybrid systems, comparison was performed also on the basis of the same usable system energy storage capacity (i.e. 625kJ for HEV, HSF and the HHV) but in the case of pneumatic hybrid systems maximal storage capacity was limited by the size of the systems in order to comply with the packaging requirements of the vehicle. The simulations were performed within the IAV Gmbh - VeLoDyn software simulator based on Matlab / Simulink software package. Advanced cycle independent control strategy (ECMS) was implemented into the hybrid supervisory control unit in order to solve power management problem for all hybrid powertrain solutions. In order to maintain State of Charge within desired boundaries during different cycles and to facilitate easy implementation and recalibration of the control strategy for very different hybrid systems, Charge Sustaining Algorithm was added into the ECMS framework. Also, a Variable Shift Pattern VSP-ECMS algorithm was proposed as an extension of ECMS capabilities so as to include gear selection into the determination of minimal (energy) cost function of the hybrid system. Further, cycle-based energetic analysis was performed in all the simulated cases, and the results have been reported in the corresponding chapters.

Bedeutung der viralen IE4-Region für die Genexpression und Replikation des humanen Cytomegalovirus

Das humane Cytomegalovirus (HCMV) ist ein fakultativ-pathogener Erreger, der bei Patienten mit geschwächter oder unausgereifter Immunabwehr schwerwiegende Erkrankungen hervorrufen kann. Wie alle Herpesviren zeigt das HCMV eine streng koordinierte Expression viraler Gene, die in eine „sehr frühe-“ (IE), „frühe “ (E) und „späte-“ (L) Phase unterteilt werden kann. Die Produkte der IE-Gene IE1 und IE2 sind für die Expression der frühen Gene und somit für die Initiation der viralen DNA-Replikation entscheidend. Sie greifen gleichzeitig in den zellulären Stoffwechsel ein und schaffen damit optimale Vorraussetzungen für die virale Vermehrung. Zu Beginn dieser Arbeit war bekannt, dass HCMV in lytisch infizierten Zellen ein abundantes IE-Transkript von 5 kb (IE4-RNA) exprimierte, dessen Funktion bislang unklar war. Ältere Publikationen deuteten darauf hin, dass die IE4-Genregion an der Transformation eukaryonter Zellen beteiligt sein könnte. Neuere Arbeiten zeigten, dass es sich bei diesem IE4-Transkript um ein metabolisch stabiles Intron handelt. Im Rahmen dieser Arbeit sollte zunächst geklärt werden, ob die IE4-Genregion ein Protein kodiert. In der Folge sollten mit viralen Deletionsmutanten Hinweise auf die biologische Funktion des IE4-Bereichs erarbeitet werden. Durch Northern Blot Analysen und cDNA-Klonierungsexperimente konnte eine Reihe neuer Spleiß-Varianten der IE4-RNA identifiziert werden. Durch Sequenzanalysen wurde gezeigt, dass diese Transkripte keine längeren offenen Leserahmen enthalten. Zusammen mit bereits publizierten Erkenntnissen, kann aus diesen Ergebnissen mit hoher Wahrscheinlichkeit geschlossen werden, dass die IE4 Region nicht für ein Protein kodiert. Zur Analyse der biologischen Funktion der IE4-Region wurde das DNA-Genom des HCMV gezielt mutagenisiert. Eine phänotypische Analyse der entsprechenden Viren mittels Reportergen-Tests und quantitativer RealTime RT-PCR zeigte, dass einige der Mutanten eine verringerte Expression früher Gene aufwiesen, die mit einer Beeinträchtigung ihrer Replikationsfähigkeit in Fibroblastenkulturen korrelierte. Dabei war die Ausbildung eines Phänotyps jedoch von dem genetischen Hintergrund des verwendeten viralen Ausgangsstammes abhängig. Auffällig war, dass phänotypische Veränderungen nur bei solchen Mutanten sichtbar wurden, die auf der Grundlage des Laborstammes Ad169 des HCMV generiert worden waren. Die nachfolgende Analyse der Ausgangsstämme ergab deutliche Unterschiede in der IE-Genexpression. Die Ergebnisse dieser Arbeit zeigen somit, dass die IE4-RNA mit hoher Wahrscheinlichkeit nicht für ein Protein kodiert, aber bei limitierender Expression der essentiellen Regulatoren IE1 und IE2 die frühe lytische Genexpression stimuliert. Die Ergebnisse dieser Arbeit stellen die Grundlage für nachfolgende Untersuchungen zur Aufklärung der molekularen Funktion der IE4-RNA im Rahmen der lytischen Infektion des HCMV dar.

An alternative blocking layer for titanium dioxide (TiO 2) solar cell applications

In hybrid organic solar cells a blocking layer between transparent electrode and nanocrystalline titania particles is essential to prevent short-circuiting and current loss through recombination at the electrode interface. Here the preparation of a uniform hybrid blocking layer which is composed of conducting titania nanoparticles embedded in an insulating polymer derived ceramic is presented. This blocking layer is prepared by sol-gel chemistry where an amphiphilic block copolymer is used as a templating agent. A novel poly(dimethylsiloxane) containing amphiphilic block copolymer poly(ethyleneglycol)methylethermethacrylate-block-poly(dimethylsiloxane)-block-poly(ethyleneglycol)methylethermethacrylate has been synthesized to act as the templating agent. Plasma treatment uncovered titania surface from any polymer. Annealing at 450°C under nitrogen resulted in anatase titania with polymer derived silicon oxycarbide ceramic. Electrical characterization by conductive scanning probe microscopy experiments revealed a percolating titania network separated by an insulating ceramic matrix. Scanning Kelvin probe force microscopy showed predominant presence of titania particles on the surface creating a large surface area for dye absorption. The uniformity of the percolating structures was proven by microbeam grazing incidence small angle x-ray scattering. First applications in hybrid organic solar cells in comparison with conventional titanium dioxide blocking layer containing devices revealed 15 fold increases in corresponding efficiencies. Poly(dimethylsiloxane)-block-poly(ethyleneglycol)methylethermethacrylate and poly(ethyleneoxide)-poly(dimethylsiloxane)methylmethacrylate diblock copolymers were also synthesized. Their titania nanocomposite films were compared with the integrated blocking layer. Liner poly(ethyleneoxide) containing diblock copolymer resulted in highly ordered foam like structures. The effect of heating temperature rise to 600°C and 1000°C on titania morphology was investigated by scanning electron and force microscopy and x-ray scattering. Sol-gel contents, hydrochloric acid, titania precursor and amphiphilic triblock copolymer were altered to see their effect on titania morphology. Increase in block copolymer content resulted in titania particles of diameter 15-20 nm.

Valutazione della sostenibilità ambientale tramite metodologia LCA di sistemi per lo sfruttamento di fonti alternative di energia e materiali

La dissertazione ha riguardato l’analisi di sostenibilità di un sistema agronomico per la produzione di olio vegetale a fini energetici in terreni resi marginali dall’infestazione di nematodi. Il processo indagato ha previsto il sovescio di una coltura con proprietà biofumiganti (brassicacea) coltivata in precessione alla specie oleosa (soia e tabacco) al fine di contrastare il proliferare dell’infestazione nel terreno. Tale sistema agronomico è stato confrontato attraverso una analisi di ciclo di vita (LCA) ad uno scenario di coltivazione della stessa specie oleosa senza precessione di brassica ma con l’utilizzo di 1-3-dicloropropene come sistema di lotta ai nematodi. Allo scopo di completare l’analisi LCA con una valutazione dell’impatto sull’uso del suolo (Land use Impact) generato dai due scenari a confronto, sono stati costruiti due modelli nel software per il calcolo del Soil Conditioning Index (SCI), un indicatore quali-quantitativo della qualità del terreno definito dal Dipartimento per l’Agricoltura degli Stati Uniti d’America (USDA).

Analisi del ciclo di vita della produzione industriale di acroleina: confronto tra il processo tradizionale e vie di sintesi alternative.

La green chemistry può essere definita come l’applicazione dei principi fondamentali di sviluppo sostenibile, al fine di ridurre al minimo l’impiego o la formazione di sostanze pericolose nella progettazione, produzione e applicazione di prodotti chimici. È in questo contesto che si inserisce la metodologia LCA (Life Cycle Assessment), come strumento di analisi e di valutazione. Il presente lavoro di tesi è stato condotto con l’intenzione di offrire una valutazione degli impatti ambientali associati al settore dei processi chimici di interesse industriale in una prospettiva di ciclo di vita. In particolare, è stato studiato il processo di produzione di acroleina ponendo a confronto due vie di sintesi alternative: la via tradizionale che impiega propilene come materia prima, e l’alternativa da glicerolo ottenuto come sottoprodotto rinnovabile di processi industriali. Il lavoro si articola in due livelli di studio: un primo, parziale, in cui si va ad esaminare esclusivamente il processo di produzione di acroleina, non considerando gli stadi a monte per l’ottenimento delle materie prime di partenza; un secondo, più dettagliato, in cui i confini di sistema vengono ampliati all’intero ciclo produttivo. I risultati sono stati confrontati ed interpretati attraverso tre tipologie di analisi: Valutazione del danno, Analisi di contributo ed Analisi di incertezza. Dal confronto tra i due scenari parziali di produzione di acroleina, emerge come il processo da glicerolo abbia impatti globalmente maggiori rispetto al tradizionale. Tale andamento è ascrivibile ai diversi consumi energetici ed in massa del processo per l’ottenimento dell’acroleina. Successivamente, per avere una visione completa di ciascuno scenario, l’analisi è stata estesa includendo le fasi a monte di produzione delle due materie prime. Da tale confronto emerge come lo scenario più impattante risulta essere quello di produzione di acroleina partendo da glicerolo ottenuto dalla trans-esterificazione di olio di colza. Al contrario, lo scenario che impiega glicerolo prodotto come scarto della lavorazione di sego sembra essere il modello con i maggiori vantaggi ambientali. Con l’obiettivo di individuare le fasi di processo maggiormente incidenti sul carico totale e quindi sulle varie categorie d’impatto intermedie, è stata eseguita un’analisi di contributo suddividendo ciascuno scenario nei sotto-processi che lo compongono. È stata infine eseguita un’analisi di incertezza tramite il metodo Monte Carlo, verificando la riproducibilità dei risultati.

A Law and Economics Analysis of Trade Secrets: Optimal Scope of Law, Misappropriation and Alternative Damages Regimes

This thesis is primarily based on three core chapters, focused on the fundamental issues of trade secrets law. The goal of this thesis is to come up with policy recommendations to improve legal structure governing trade secrets. The focal points of this research are the following. What is the optimal scope of trade secrets law? How does it depend on the market characteristics such as degree of product differentiation between competing products? What factors need to be considered to balance the contradicting objectives of promoting innovation and knowledge diffusion? The second strand of this research focuses on the desirability of lost profits or unjust enrichment damage regimes in case of misappropriation of a trade secret. A comparison between these regimes is made and simple policy implications are extracted from the analysis. The last part of this research is an empirical analysis of a possible relationship between trade secrets sharing and misappropriation instances faced by firms.

Alternative reproductive tactics, sexual selection and the effects of inbreeding in the ant Hypoponera opacior

Inbreeding can lead to a fitness reduction due to the unmasking of deleterious recessive alleles and the loss of heterosis. Therefore, most sexually reproducing organisms avoid inbreeding, often by disperal. Besides the avoidance of inbreeding, dispersal lowers intraspecific competition on a local scale and leads to a spreading of genotypes into new habitats. In social insects, winged reproductives disperse and mate during nuptial flights. Therafter, queens independently found a new colony. However, some species also produce wingless sexuals as an alternative reproductive tactic. Wingless sexuals mate within or close to their colony and queens either stay in the nest or they found a new colony by budding. During this dependent colony foundation, wingless queens are accompanied by a fraction of nestmate workers. The production of wingless reproductives therefore circumvents the risks associated with dispersal and independent colony foundation. However, the absence of dispersal can lead to inbreeding and local competition.rnIn my PhD-project, I investigated the mating biology of Hypoponera opacior, an ant that produces winged and wingless reproductives in a population in Arizona. Besides the investigation of the annual reproductive cycle, I particularly focused on the consequences of wingless reproduction. An analysis of sex ratios in wingless sexuals should reveal the relative importance of local resource competition among queens (that mainly compete for the help of workers) and local mate competition among males. Further, sexual selection was expected to act on wingless males that were previously found to mate with and mate-guard pupal queens in response to local mate competition. We studied whether males are able to adapt their mating behaviour to the current competitive situation in the nest and which traits are under selection in this mating situation. Last, we investigated the extent and effects of inbreeding. As the species appeared to produce non-dispersive males and queens quite frequently, we assumed to find no or only weak negative effects of inbreeding and potentially mechanisms that moderate inbreeding levels despite frequent nest-matings.rnWe found that winged and wingless males and queens are produced during two separate seasons of the year. Winged sexuals emerge in early summer and conduct nuptial flights in July, when climate conditions due to frequent rainfalls lower the risks of dispersal and independent colony foundation. In fall, wingless sexuals are produced that reproduce within the colonies leading to an expansion on the local scale. The absence of dispersal during this second reproductive season resulted in a local genetic population viscosity and high levels of inbreeding within the colonies. Male-biased sex ratios in fall indicated a greater importance of local resource competition among queens than local mate competition among males. Males were observed to adjust mate-guarding durations to the competitive situation (i.e. the number of competing males and pupae) in the nest, an adaptation that helps maximising their reproductive success. Further, sexual selection was found to act on the timing of emergence as well as on body size in these males, i.e. earlier emerging and larger males show a higher mating success. Genetic analyses revealed that wingless males do not actively avoid inbreeding by choosing less related queens as mating partners. Further, we detected diploid males, a male type that is produced instead of diploid females if close relatives mate. In contrast to many other Hymenopteran species, diploid males were here viable and able to sire sterile triploid offspring. They did not differ in lifespan, body size and mating success from “normal” haploid males. Hence, diploid male production in H. opacior is less costly than in other social Hymenopteran species. No evidence of inbreeding depression was found on the colony level but more inbred colonies invested more resources into the production of sexuals. This effect was more pronounced in the dispersive summer generation. The increased investment in outbreeding sexuals can be regarded as an active strategy to moderate the extent and effects of inbreeding. rnIn summary, my thesis describes an ant species that has evolved alternative reproductive tactics as an adaptation to seasonal environmental variations. Hereby, the species is able to maintain its adaptive mating system without suffering from negative effects due to the absence of dispersal flights in fall.rn

Cost-Effectiveness of Alternative Retrofit Options to Support Decision Making

How to evaluate the cost-effectiveness of repair/retrofit intervention vs. demolition/replacement and what level of shaking intensity can the chosen repairing/retrofit technique sustain are open questions affecting either the pre-earthquake prevention, the post-earthquake emergency and the reconstruction phases. The (mis)conception that the cost of retrofit interventions would increase linearly with the achieved seismic performance (%NBS) often discourages stakeholders to consider repair/retrofit options in a post-earthquake damage situation. Similarly, in a pre-earthquake phase, the minimum (by-law) level of %NBS might be targeted, leading in some cases to no-action. Furthermore, the performance measure enforcing owners to take action, the %NBS, is generally evaluated deterministically. Not directly reflecting epistemic and aleatory uncertainties, the assessment can result in misleading confidence on the expected performance. The present study aims at contributing to the delicate decision-making process of repair/retrofit vs. demolition/replacement, by developing a framework to assist stakeholders with the evaluation of the effects in terms of long-term losses and benefits of an increment in their initial investment (targeted retrofit level) and highlighting the uncertainties hidden behind a deterministic approach. For a pre-1970 case study building, different retrofit solutions are considered, targeting different levels of %NBS, and the actual probability of reaching Collapse when considering a suite of ground-motions is evaluated, providing a correlation between %NBS and Risk. Both a simplified and a probabilistic loss modelling are then undertaken to study the relationship between %NBS and expected direct and indirect losses.

Analisi del ciclo di vita applicato alla produzione dell'anidride maleica mediante vie alternative di sintesi industriale

Nel campo dell’industria chimica la ricerca si è mossa in direzione di rendere i processi più sostenibili. Ciò viene effettuato considerando le linee guida della green chemistry. In questo contesto si colloca la metodologia LCA che valuta l’impatto ambientale associato ad un processo o un prodotto, comprendendo tutto il suo ciclo di vita. Nel presente lavoro di tesi si studia l’applicazione della LCA alla sintesi industriale di anidride maleica (AM), che viene ottenuta tramite reazione di ossidazione del benzene o dell’n-butano. Nello studio si sono modellate tre diverse vie di sintesi dell’AM considerando il processo di produzione che parte da benzene e il processo di produzione da butano con due diversi tipi di reattore: il letto fisso e il letto fluido (processo ALMA). Negli scenari si considerano le fasi di produzione dei reagenti e si è modellata la fase della reazione di ossidazione e l’incenerimento dei sottoprodotti e del reagente non convertito. Confrontando i tre processi, emerge che al processo che parte da benzene sono associati gli impatti globali maggiori mentre il processo ALMA ha un minore carico ambientale. Il processo da benzene risulta avere maggiori impatti per le categorie Cambiamento climatico, Formazione di particolato e Consumo dei metalli. Il processo da butano a tecnologia a letto fisso presenta invece maggiori impatti per le categorie Tossicità umana e Consumo di combustibili fossili, dovuti alla maggiore richiesta energetica effettuata dal processo di ossidazione del butano con tecnologia a letto fisso e alla richiesta di combustibile ausiliario per la fase di incenerimento. Tale risultato emerge anche dall’analisi effettuata con il Cumulative Energy Demand. Al processo ALMA sono associati gli impatti inferiori in assoluto, nonostante abbia una resa inferiore al processo che utilizza il letto fisso. I risultati dell’analisi LCA sono stati confermati dall’analisi delle incertezze, realizzata con il metodo statistico Monte Carlo.

Una lingua per l'Europa: possibili alternative al multilinguismo

Parlando della questione linguistica in Europa, viene svolta un'analisi in tre parti. La prima parte tratta storicamente del multilinguismo europeo e del concetto di lingua franca; la seconda presenta quindi le possibili soluzioni finora emerse, concentrandosi sull'utilizzo della lingua Inglese in ambito internazionale. Infine, sono illustrate altre possibilità, suddividendo il discorso in ulteriori tre parti: la prima riguarda l'utilizzo di una lingua naturale come lingua franca; la seconda espone alcuni progetti per semplificare lingue già esistenti; per ultimo, si offre una panoramica sulle lingue artificiali.

Analisi del trasferimento di composti fenolici in campioni non stabilizzati di succo d?uva (vitis vinifera l.) biologico mediante tecniche di macerazione alternative

Il seguente elaborato prende le mosse da un progetto, denominato Nutrid’Uva, promosso e attivamente concretizzato dall’azienda bresciana “Cascina Belmonte” di concerto con il laboratorio del Campus di Scienze Alimentari di Cesena (Università di Bologna). In particolare, si è voluta sperimentare l’applicazione di processi innovativi per la produzione di succo d’uva bio e bevande a base di succo d’uva bio proveniente da uve biologiche coltivate nell’areale della Valténesi (sponda occidentale del Garda), stabilizzati mediante l’uso di alte pressioni idrostatiche e senza trattamento termico. In questi termini, il presente lavoro ha l’obiettivo di: delineare il quadro generale in cui si inserisce il progetto, arricchendolo con spunti tratti dalle pratiche di processo seguite in loco; determinare il contenuto delle classi polifenoliche presenti nei campioni di alcuni succhi sottoposti a differenti tecnologie di macerazione in confronto all’abituale processo di lavorazione aziendale (vitigni ibridi diretti produttori, Barbera, Merlot, Cabernet). Si è proceduto dunque attraverso l’analisi spettrofotometrica delle principali classi di composti fenolici e dell’attività antiossidante.

Alternative derivative expansion in Functional RG and application

We give a brief review of the Functional Renormalization method in quantum field theory, which is intrinsically non perturbative, in terms of both the Polchinski equation for the Wilsonian action and the Wetterich equation for the generator of the proper verteces. For the latter case we show a simple application for a theory with one real scalar field within the LPA and LPA' approximations. For the first case, instead, we give a covariant "Hamiltonian" version of the Polchinski equation which consists in doing a Legendre transform of the flow for the corresponding effective Lagrangian replacing arbitrary high order derivative of fields with momenta fields. This approach is suitable for studying new truncations in the derivative expansion. We apply this formulation for a theory with one real scalar field and, as a novel result, derive the flow equations for a theory with N real scalar fields with the O(N) internal symmetry. Within this new approach we analyze numerically the scaling solutions for N=1 in d=3 (critical Ising model), at the leading order in the derivative expansion with an infinite number of couplings, encoded in two functions V(phi) and Z(phi), obtaining an estimate for the quantum anomalous dimension with a 10% accuracy (confronting with Monte Carlo results).

CCK2 receptor splice variant with intron 4 retention in human gastrointestinal and lung tumours

The wild-type cholecystokinin type 2 (CCK(2)) receptor is expressed in many gastrointestinal and lung tumours. A splice variant of the CCK(2) receptor with retention of intron 4 (CCK(2)Ri4sv) showing constitutive activity associated with increased tumour growth was described in few colorectal, pancreatic and gastric cancers. Given the potential functional and clinical importance of this spliceoform, its occurrence was quantitatively characterized in a broad collection of 81 gastrointestinal and lung tumours, including insulinomas, ileal carcinoids, gastrointestinal stromal tumours (GIST), gastric, colorectal and pancreatic ductal adenocarcinomas, cholangiocellular and hepatocellular carcinomas, small cell lung cancers (SCLC), non-SCLC (nSCLC) and bronchopulmonary carcinoids, as well as 21 samples of corresponding normal tissues. These samples were assessed for transcript expression of total CCK(2) receptor, wild-type CCK(2) receptor and CCK(2)Ri4sv with end-point and real-time RT-PCR, and for total CCK(2) receptor protein expression on the basis of receptor binding with in vitro receptor autoradiography. Wild-type CCK(2) receptor transcripts were found in the vast majority of tumours and normal tissues. CCK(2)Ri4sv mRNA expression was present predominantly in insulinomas (incidence 100%), GIST (100%) and SCLC (67%), but rarely in pancreatic, colorectal and gastric carcinomas and nSCLC. It was not found in wild-type CCK(2) receptor negative tumours or any normal tissues tested. CCK(2)Ri4sv transcript levels in individual tumours were low, ranging from 0.02% to 0.14% of total CCK(2) receptor transcripts. In conclusion, the CCK(2)Ri4sv is a marker of specific gastrointestinal and lung tumours. With its high selectivity for and high incidence in SCLC and GIST, it may represent an attractive clinical target.

Growth hormone (GH)-releasing hormone increases the expression of the dominant-negative GH isoform in cases of isolated GH deficiency due to GH splice-site mutations

An autosomal dominant form of isolated GH deficiency (IGHD II) can result from heterozygous splice site mutations that weaken recognition of exon 3 leading to aberrant splicing of GH-1 transcripts and production of a dominant-negative 17.5-kDa GH isoform. Previous studies suggested that the extent of missplicing varies with different mutations and the level of GH expression and/or secretion. To study this, wt-hGH and/or different hGH-splice site mutants (GH-IVS+2, GH-IVS+6, GH-ISE+28) were transfected in rat pituitary cells expressing human GHRH receptor (GC-GHRHR). Upon GHRH stimulation, GC-GHRHR cells coexpressing wt-hGH and each of the mutants displayed reduced hGH secretion and intracellular GH content when compared with cells expressing only wt-hGH, confirming the dominant-negative effect of 17.5-kDa isoform on the secretion of 22-kDa GH. Furthermore, increased amount of 17.5-kDa isoform produced after GHRH stimulation in cells expressing GH-splice site mutants reduced production of endogenous rat GH, which was not observed after GHRH-induced increase in wt-hGH. In conclusion, our results support the hypothesis that after GHRH stimulation, the severity of IGHD II depends on the position of splice site mutation leading to the production of increasing amounts of 17.5-kDa protein, which reduces the storage and secretion of wt-GH in the most severely affected cases. Due to the absence of GH and IGF-I-negative feedback in IGHD II, a chronic up-regulation of GHRH would lead to an increased stimulatory drive to somatotrophs to produce more 17.5-kDa GH from the severest mutant alleles, thereby accelerating autodestruction of somatotrophs in a vicious cycle.