An in vitro larval motility assay to determine anthelmintic sensitivity for human hookworm and Strongyloides species

With the implementation of programs to control lymphatic filariasis and soil-transmitted helminths using broad spectrum anthelmintics, including albendazole and ivermectin, there is a need to develop an in vitro assay for detection of drug resistance. This report describes an in vitro assay for measuring the effects of ivermectin and benzimidazoles on the motility of larvae of the hookworm species Ancylostoma ceylanicum, A. caninum, and Necator americanus, and Strongyloides species including Strongyloides stercoralis, and S. ratti. A dose-response relationship was demonstrated with each of the parasite species, with distinct differences observed between the various species. In pilot field testing of the assay with N. americanus larvae recovered from human fecal samples, a dose-response relationship was observed with ivermectin. While the assay has demonstrated the ability to determine drug responsiveness, its usefulness in resistance detection will require correlation with the clinical outcome among individuals infected with parasite strains showing different drug sensitivities.

Pontosubicular apoptosis ("necrosis") in human neonates with intrauterine growth retardation and placental infarction

In a previous study of 37 autopsied stillbirths with non-dysmorphic intrauterine growth retardation ( IUGR), 26 cases were associated with placental infarction, a morphologic marker of uteroplacental insufficiency. Nine of the 26 cases with both IUGR and placental infarction, where archival tissue was available, had grey matter ischaemic lesions that were subsequently identified as pontosubicular necrosis. This lesion is now regarded as a localized form of apoptosis. A further eight third trimester stillbirth cases with both IUGR and placental infarction were ascertained prospectively. Sixteen of these 17 cases showed pontosubicular apoptosis, identified morphologically and verified using activated caspase-3 and TUNEL. Five of the 17 cases showed apoptosis in the frontal or temporal cortex as well. In this current study, pontosubicular apoptosis was strongly associated with IUGR and placental infarction in third trimester stillborns, suggesting that uteroplacental insufficiency leading to chronic fetal hypoxaemia may cause cerebral apoptosis.

Quantification of the magnification and distortion effects of a pediatric flexible video-bronchoscope

Background: Flexible video bronchoscopes, in particular the Olympus BF Type 3C160, are commonly used in pediatric respiratory medicine. There is no data on the magnification and distortion effects of these bronchoscopes yet important clinical decisions are made from the images. The aim of this study was to systematically describe the magnification and distortion of flexible bronchoscope images taken at various distances from the object. Methods: Using images of known objects and processing these by digital video and computer programs both magnification and distortion scales were derived. Results: Magnification changes as a linear function between 100 mm ( x 1) and 10 mm ( x 9.55) and then as an exponential function between 10 mm and 3 mm ( x 40) from the object. Magnification depends on the axis of orientation of the object to the optic axis or geometrical axis of the bronchoscope. Magnification also varies across the field of view with the central magnification being 39% greater than at the periphery of the field of view at 15 mm from the object. However, in the paediatric situation the diameter of the orifices is usually less than 10 mm and thus this limits the exposure to these peripheral limits of magnification reduction. Intraclass correlations for measurements and repeatability studies between instruments are very high, r = 0.96. Distortion occurs as both barrel and geometric types but both types are heterogeneous across the field of view. Distortion of geometric type ranges up to 30% at 3 mm from the object but may be as low as 5% depending on the position of the object in relation to the optic axis. Conclusion: We conclude that the optimal working distance range is between 40 and 10 mm from the object. However the clinician should be cognisant of both variations in magnification and distortion in clinical judgements.

'I could do with a pair of wings': Perspectives on physical activity, bodies and health from young Australian children

There is little research that reports children's perspectives on physical activity, bodies and health. This paper, drawn from a larger multi-method study on physical activity in the lives of seven- and eight-year-old Australian children, attempts to 'give a voice' to 13 children's views. Interviews focused on children's activity preferences and related decision making and motivations pertaining to these activities, as well as how they thought about the relationships between physical activity, health and their bodies. Data suggest some tensions surrounding the importance of fun for children alongside their awareness of 'healthist' discourses that require self-monitoring and improvement.

Perceptions of organisational subculture and their significance for organisational commitment

This paper investigates the relationship between perceptions of organisational culture, organisational subculture, leadership style, and commitment. The impact of culture and leadership style on commitment has been previously noted, but there is a lack of detail regarding how different types of culture and leadership styles relate to commitment. The paper particularly addresses the notion of organisational subcultures and how the perception of those cultures relates to commitment, subculture being a neglected variable in the commitment literature. These issues were addressed in a survey of 258 nurses drawn from a range of hospital settings and wards within the Sydney metropolitan region. Results indicate that perceived organisational subculture has a strong relationship with commitment. Furthermore, the results identify the relative strength of specific types of leadership style and specific types of subculture with commitment. Both innovative and supportive subcultures have a clear positive relationship, while bureaucratic subcultures have a negative relationship. In terms of leadership style, a consideration style had a stronger relationship with commitment than a structuring style. Regression analysis was used to investigate the possible role of subculture as a mediator for the influence of leadership on commitment. Both direct and indirect effects of leadership on commitment were found. Implications for practice and for further research are discussed.

Escalation and deceleration of offending behaviours from adolescence to early adulthood

Relatively little longitudinal research is available in Australia to describe I the age/crime relationship in much detail, particularly patterns of offending occurring during the transition from adolescence to early adulthood. This paper addresses this issue using self-reported criminal involvement from a school-based sample, a group of socially disadvantaged individuals, and a group of officially identified offenders. The findings support the widespread research that rates of offending peak during adolescence, at which time offending is widespread, and that the criminal career is of relatively short duration. However, the results also demonstrate that the age/crime curve is not a unitary phenomenon. The type of offending behaviour being considered, the gender of the population, and the perpetrator's exposure to the criminal justice system contribute to the variability in the curve. In this study, the prevalence and mean level of overall offending for the total sample was higher during early adulthood than adolescence for vehicle offences and drug-use, rates of theft were similar in both periods, and vandalism and serious offending were lower. In addition, socially disadvantaged young people reported involvement in crime that peaked and desisted earlier in the life course compared to the school-based sample, and gender differences within these groups were also found. For the school-based sample, offending for females began and desisted earlier than for males, but within the at-risk group, the opposite was true. Implications for crime-prevention programming are discussed.

Diffusion of linear paraffins in nanoporous silica

The diffusion of hexane, heptane, octane, and decane in nanoporous MCM-41 silica at various temperatures is investigated by the zero-length-column method. The diffusion coefficients are derived by a complete-time-range analysis of desorption curves at different purge flow rates and temperatures. The results show that the calculated low-coverage diffusivity values decrease monotonically, and the derived Henry's law constants increase, as the carbon number of paraffins increases. The study reveals that transport is strongly influenced by intracrystalline diffusion and dominated by the sorbate-sorbent interaction. The diffusion activation energy and adsorption isosteric heat at zero loading increase monotonically with the carbon number of linear paraffins, but their ratio is essentially constant for each adsorbate compound.

Three-dimensional simulation of the rolling of a saturated fibro-porous media

This paper describes recent advances made in computational modelling of the sugar cane liquid extraction process. The saturated fibro-porous material is rolled between circumferentially grooved rolls, which enhance frictional grip and provide a low-resistance path for liquid flow during the extraction process. Previously reported two-dimensional (2D) computational models, account for the large deformation of the porous material by solving the fully coupled governing fibre stress and fluid-flow equations using finite element techniques. While the 2D simulations provide much insight into the overarching cause-effect relationships, predictions of mechanical quantities such as roll separating force and particularly torque as a function of roll speed and degree of compression are not satisfactory for industrial use. It is considered that the unsatisfactory response in roll torque prediction may be due to the stress levels that exist between the groove tips and roots which have been largely neglected in the geometrically simplified 2D model. This paper gives results for both two- and three-dimensional finite element models and highlights their strengths and weaknesses in predicting key milling parameters. (c) 2005 Elsevier B.V. All rights reserved.

The drying of sewage sludge by immersion frying

The objective of this work was to dry sewage sludge using a fry-drying process. The frying experiments were carried out in commercial fryers modified by adding thermocouples to the setup. During frying, typical drying curves were obtained and it was verified that, in relation to the parameters: oil temperature, oil type and shape of the sample, the shape factor the most effect on the drying rate, at least within the range chosen for the variables studied. Oil uptake and calorific value were also analyzed. The calorific value of the samples increased with frying time, reaching values around 24MJ/kg after 600s of frying (comparable to biocombustibles such as wood and sugarcane bagasse). The process of immersion frying showed great potential for drying materials, especially sewage sludge, obtaining a product with a high energy content, thereby increasing its value as a combustible.

Modelling nucleation in wet granulation

Nucleation is the first stage in any granulation process where binder liquid first comes into contact with the powder. This paper investigates the nucleation process where binder liquid is added to a fine powder with a spray nozzle. The dimensionless spray flux approach of Hapgood et al. (Powder Technol. 141 (2004) 20) is extended to account for nonuniform spray patterns and allow for overlap of nuclei granules rather than spray drops. A dimensionless nuclei distribution function which describes the effects of the design and operating parameters of the nucleation process (binder spray characteristics, the nucleation area ratio between droplets and nuclei and the powder bed velocity) on the fractional surface area coverage of nuclei on a moving powder bed is developed. From this starting point, a Monte Carlo nucleation model that simulates full nuclei size distributions as a function of the design and operating parameters that were implemented in the dimensionless nuclei distribution function is developed. The nucleation model was then used to investigate the effects of the design and operating parameters on the formed nuclei size distributions and to correlate these effects to changes of the dimensionless nuclei distribution function. Model simulations also showed that it is possible to predict nuclei size distributions beyond the drop controlled nucleation regime in Hapgood's nucleation regime map. Qualitative comparison of model simulations and experimental nucleation data showed similar shapes of the nuclei size distributions. In its current form, the nucleation model can replace the nucleation term in one-dimensional population balance models describing wet granulation processes. Implementation of more sophisticated nucleation kinetics can make the model applicable to multi-dimensional population balance models.

On minimal models of process systems

Minimal representations are known to have no redundant elements, and are therefore of great importance. Based on the notions of performance and size indices and measures for process systems, the paper proposes conditions for a process model being minimal in a set of functionally equivalent models with respect to a size norm. Generalized versions of known procedures to obtain minimal process models for a given modelling goal, model reduction based on sensitivity analysis and incremental model building are proposed and discussed. The notions and procedures are illustrated and compared on a simple example, that of a simple nonlinear fermentation process with different modelling goals and on a case study of a heat exchanger modelling. (C) 2004 Elsevier Ltd. All rights reserved.