981 resultados para working range
Resumo:
The silicon photomultiplier (SiPM) is a novel detector technology that has undergone a fast development in the last few years, owing to its single-photon resolution and ultra-fast response time. However, the typical high dark count rates of the sensor may prevent the detection of low intensity radiation fluxes. In this article, the time-gated operation with short active periods in the nanosecond range is proposed as a solution to reduce the number of cells fired due to noise and thus increase the dynamic range. The technique is aimed at application fields that function under a trigger command, such as gated fluorescence lifetime imaging microscopy.
Resumo:
Desde aquel incipiente interés renacentista del siglo XVI hasta la profesionalización de la arqueología en la actualidad, la ingente actividad realizada en Tarragona ha necesitado de formas de registrarla y organizarla, a fin de ser estudiada en el contexto diacrónico general de la ciudad. Esta tarea se ha visto favorecida en el último decenio del siglo pasado por la aparición y adopción de una herramienta informática que no fue diseñada específicamente para la Arqueología. El GIS o SIG, se ha convertido en un instrumento básico e indispensable para cualquier ciudad que tenga un mínimo bagaje patrimonial. Prueba de ello son las publicaciones de Cartas Arqueológicas obtenidas a partir de este software, o sin ir mucho más lejos, los trabajos presentados en este simposio. Presentamos a continuación la experiencia de Tarragona en la creación de un programa, bajo soporte GIS, para la gestión de la actividad arqueológica. Previamente contextualizaremos esta experiencia ya que es justa heredera de iniciativas individuales y de equipos y proyectos previos que trataron, con mucha menor suerte que no éxito, de organizar y poner orden en la maltrecha documentación arqueológica de nuestra ciudad. Describiremos posteriormente las funcionalidades básicas de este programa, su arquitectura y las aplicaciones realizadas en el desarrollo de sendos proyectos de estudio de la ciudad. En este último caso nos centraremos, principalmente, en el proyecto Planimetria Arqueològica de Tàrraco, impulsado por el Museu d’Història del Ayuntamiento de Tarragona y el Institut Català d’Arqueologia Clàssica, y que ha contado con la colaboración de la Generalitat de Catalunya para su edición. Seguidamente veremos como el uso de la información en capas registrada en el GIS combinada con la inclusión de la cartografía histórica de una ciudad permiten el análisis de problemas arqueológicos irresolubles sólo con los datos estrictamente arqueológicos. En este caso se aplicará sobre la validación de la morfología urbana de Tarraco propuesta por Macias (2000a). Por último se hará una reflexión sobre cuales podrían ser las mejoras aplicables sobre el programa, en previsión de futuras revisiones del mismo.
Resumo:
Annualising work hours (AH) is a means of achievement flexibility in the use of human resources to face the seasonal nature of demand. In Corominas et al. (1) two MILP models are used to solve the problem of planning staff working hours with annual horizon. The costs due to overtime and to the employment of temporary workers are minimised, and the distribution of working time over the course of the year for each worker and the distribution of working time provided by temporary workers are regularised.In the aforementioned paper, the following is assumed: (i) the holiday weeks are fixed a priori and (ii) the workers are from different categories who are able to perform specific type of task have se same efficiency; moreover, the values of the binary variables (and others) in the second model are fixed to those in the first model (thus, in the second model these will intervene as constants and not as variables, resulting in an LP model).In the present paper, these assumptions are relaxed and a more general problem is solved. The computational experiment leads to the conclusion that MILP is a technique suited to dealing with the problem.
Resumo:
Hitsaavassa teollisuudessa kilpailukyvyn säilyttäminen ja mahdollinen parantaminen edellyttää hitsauksen tehokkuuden nostoa. Laserhitsauksen nopeus, tarkkuus, tasainen laatu ja aikaansaatava syvä tunkeuma ovatkin vakiinnuttaneet menetelmän vankan aseman tehokkaana valmistusmenetelmänä. Sähkön ja heliumin hinnan nousu ovat pakottaneet teollisuuden miettimään entistä tehokkaampien ja ympäristöystävällisempien laserlähteiden hankkimista. Kuitulaserin korkea hyötysuhde, hyvä säteenlaatu, suuri teho ja matalat käyttökustannukset ovat herättäneet kiinnostusta laserhitsaavassa teollisuudessa. Diplomityössä keskityttiin kuitulaserhitsauksen soveltamiseen. Työn tavoitteena oli parantaa kuitulaserhitsausmenetelmän ymmärrystä ja saada käsitys siitä, miten valitaan hitsausparametrien arvot, ja soveltuuko kuitulaser teolliseen tuotantoon. Tutkimuksessa pyrittiin löytämään peruskokeilla optimaaliset hitsausparametrit, joilla syntyy hyvin tunkeutunut, vähän huokosia sisältävä, ja ulkoisesti laadukas hitsi, sekä optimaalinen hitsin tunkeumaprofiili. Lopuksi hitsausparametreja testattiin tuotteen hitsauksessa. Kuitulaser soveltuu erinomaisesti hiiliteräksen hitsaukseen ja hyvin erikoislujien terästen hitsaukseen, kun teräksen hiili- ja rikkipitoisuudet ovat matalia. Sillä on laaja parametrialue. Yleisimmät hitsausvirheet ovat vajaa hitsautumissyvyys ja huokoset. Tässä diplomityössä keskityttiin etsimään yhdelle valmistettavalle tuotteelle optimaaliset kuitulaserhitsausparametrit. Kuitulaserin laser- ja prosessiparametrien vaikutusta hitsiin ei ole juurikaan tutkittu. Diplomityön kokeiden perusteella olisi hyvä tehdä eri materiaalien jatkotutkimusta railonvalmistuksen, kuten liitoksen oksidikerroksen ja ilmaraon sekä suojakaasun, vaikutuksesta hitsiin. Kuitulaserin hyvä säteenlaatu ja muut laser-parametrit ovat tuoneet mukanaan prosessiin uusia ilmiöitä, joita on syytä tutkia lisää.
Resumo:
This work is dedicated to investigation of the energy spectrum of one of the most anisotropic narrow-gap semiconductors, CdSb. At the beginning of the present studies even the model of its energy band structure was not clear. Measurements of galvanomagnetic effects in wide temperature range (1.6 - 300 K) and in magnetic fields up to 30 T were chosen for clarifying of the energy spectrum in the intentionally undoped CdSb single crystals and doped with shallow impurities (In, Ag). Detection of the Shubnikov - de Haas oscillations allowed estimating the fundamental energy spectrum parameters. The shapes of the Fermi surfaces of electrons (sphere) and holes (ellipsoid), the number of the equivalent extremums for valence band (2) and their positions in the Brillouin zone were determined for the first time in this work. Also anisotropy coefficients, components of the tensor of effective masses of carriers, effective masses of density of states, nonparabolicity of the conduction and valence bands, g-factor and its anisotropy for n- and p-CdSb were estimated for the first time during these studies. All the results obtained are compared with the cyclotron resonance data and the corresponding theoretical calculations for p-CdSb. This is basic information for the analyses of the complex transport properties of CdSb and for working out the energy spectrum model of the shallow energy levels of defects and impurities in this semiconductor. It was found out existence of different mechanisms of hopping conductivity in the presence of metal - insulator transition induced by magnetic field in n- and p-CdSb. Quite unusual feature opened in CdSb is that different types of hopping conductivity may take place in the same crystal depending on temperature, magnetic field or even orientation of crystal in magnetic field. Transport properties of undoped p-CdSb samples show that the anisotropy of the resistivity in weak and strong magnetic fields is determined completely by the anisotropy of the effective mass of the holes. Temperature and magnetic field dependence of the Hall coefficient and magnetoresistance is attributed to presence of two groups of holes with different concentrations and mobilities. The analysis demonstrates that below Tcr ~ 20 K and down to ~ 6 - 7 K the low-mobile carriers are itinerant holes with energy E2 ≈ 6 meV. The high-mobile carriers, at all temperatures T < Tcr, are holes activated thermally from a deeper acceptor band to itinerant states of a shallower acceptor band with energy E1 ≈ 3 meV. Analysis of temperature dependences of mobilities confirms the existence of the heavy-hole band or a non-equivalent maximum and two equivalent maxima of the light-hole valence band. Galvanomagnetic effects in n-CdSb reveal the existence of two groups of carriers. These are the electrons of a single minimum in isotropic conduction band and the itinerant electrons of the narrow impurity band, having at low temperatures the energies above the bottom of the conduction band. It is found that above this impurity band exists second impurity band of only localized states and the energy of both impurity bands depend on temperature so that they sink into the band gap when temperature is increased. The bands are splitted by the spin, and in strong magnetic fields the energy difference between them decreases and redistribution of the electrons between the two impurity bands takes place. Mobility of the conduction band carriers demonstrates that scattering in n-CdSb at low temperatures is strongly anisotropic. This is because of domination from scattering on the neutral impurity centers and increasing of the contribution to mobility from scattering by acoustic phonons when temperature increases. Metallic conductivity in zero or weak magnetic field is changed to activated conductivity with increasing of magnetic field. This exhibits a metal-insulator transition (MIT) induced by the magnetic field due to shift of the Fermi level from the interval of extended states to that of the localized states of the electron spectrum near the edge of the conduction band. The Mott variablerange hopping conductivity is observed in the low- and high-field intervals on the insulating side of the MIT. The results yield information about the density of states, the localization radius of the resonant impurity band with completely localized states and about the donor band. In high magnetic fields this band is separated from the conduction band and lies below the resonant impurity bands.
Resumo:
BACKGROUND AND AIMS: Black cherry (Prunus serotina) is a North American tree that is rapidly invading European forests. This species was introduced first as an ornamental plant, then it was massively planted by foresters in many countries, but its origins and the process of invasion remain poorly documented. Based on a genetic survey of both native and invasive ranges, the invasion history of black cherry was investigated by identifying putative source populations and then assessing the importance of multiple introductions on the maintenance of gene diversity. METHODS: Genetic variability and structure of 23 populations from the invasive range and 22 populations from the native range were analysed using eight nuclear microsatellite loci and five chloroplast DNA regions. KEY RESULTS: Chloroplast DNA diversity suggests there were multiple introductions from a single geographic region (the north-eastern United States). A low reduction of genetic diversity was observed in the invasive range for both nuclear and plastid genomes. High propagule pressure including both the size and number of introductions shaped the genetic structure in Europe and boosted genetic diversity. Populations from Denmark, The Netherlands, Belgium and Germany showed high genetic diversity and low differentiation among populations, supporting the hypothesis that numerous introduction events, including multiple individuals and exchanges between sites, have taken place during two centuries of plantation. CONCLUSIONS: This study postulates that the invasive black cherry has originated from east of the Appalachian Mountains (mainly the Allegheny plateau) and its invasiveness in north-western Europe is mainly due to multiple introductions containing high numbers of individuals.
Resumo:
Suurten polttolaitosten päästöjen tarkkailu- ja raportointivaatimukset ovat uudistuneet viime vuosina paljon. Suurimpia muutosten aiheuttajia ovat Valtioneuvoston asetus 1017/2002 ja standardi EN-14181. Tässä työssä kuvataan uudet vaatimukset täyttävän päästöjen tarkkailu- ja raportointijärjestelmän rakentaminen monipolttoainekattilalle. Aluksi esitellään mitä uusia vaatimuksia päästöjen tarkkailulle ja raportoinnille on tullut viime aikoina. Lisäksi selvitetään vaatimusten mahdolliset ristiriidat ja ristiriitatilanteiden ratkaisutavat. Seuraavaksi esitellään vaatimukset täyttävän järjestelmän määritelmät. Erityisestiselvitetään kattilan erityispiirteiden vaatimia ratkaisuja. Lopuksi esitellään päästöjen tarkkailu- ja raportointijärjestelmän käyttökokemuksia ja parantamismahdollisuuksia. Kaikki tarkastelut tehdään ensisijaisesti toiminnanharjoittajan näkökulmasta. Järjestelmä toteutettiin Stora Enso Oyj:n Heinolan Flutingtehtaan voimalaitoksen pääkattilalle, jossa käytetään laajaa polttoainevalikoimaa. Toteutuspaikan valinta tehtiin sillä perusteella, että uudet päästöjen tarkkailu- ja raportointivaatimukset ovat erityisen haasteellisia monipolttoainekattiloiden tapauksessa. Työssä selvitetään järjestelmän soveltamismahdollisuuksia myös kahdella muulla Stora Enson tehtaalla. Käyttöönottovaiheen johtopäätöksenä todettiin päästöjen tarkkailu- ja raportointijärjestelmän täyttävän sille asetetut vaatimukset. Lisäksi havaittiin, että toiminnanharjoittajan kannattaa panostaa erityisesti järjestelmän joustavuuteen, luotettavuuteen, helppokäyttöisyyteen ja vikasietoisuuteen. Toiminnanharjoittaja pystyy määrittelyvaiheessa vaikuttamaan järjestelmän ominaisuuksiin helpommin ja edullisemmin kuin käyttöönoton jälkeen. Toiminnanharjoittajalta vaadittu työtuntimäärä arvioitiin Heinolan Flutingtehtaan tapauksen perusteella. Lopuksi selvitettiin mahdollisia tulevaisuuden kehityskohteita vastaavissa järjestelmissä.
Resumo:
Tässä diplomityössä käsitellään erään tuotekehitysprojektissa tehdyn turbokoneen prototyypin takuumittauksia. Takuumittauksilla on tarkoitus varmistaa alustavasti valmistetun prototyypin toimivuus. Mittauksista saatuja arvoja on lopuksi tarkoitus verrata suunnitteluarvoihin, jolloin nähdäänkuinka hyvin suunnitelmat ja alustavat suunnittelulaskelmat ovat onnistuneet koskien tätä turbokonetta. Työssä esitellään pääpiirteissään laitteen toiminta. Takuumittauksia varten tarpeelli-set mitattavat suureet ja vaihtoehtoiset mittausmenetelmät on esitelty. Lisäksi on suunniteltu mittausjärjestelmä PI-kaavioineen, jolla pystytään saamaan riittävän kat-tava mittaustulos laajuus. Työssä on myös esitelty miten mittaustuloksista saadaan tarvittavat vertailuarvot verrattavaksi alustaviin suunnittelulaskelmiin. Tämä diplomityö on tehty, että alustavat mittaussuunnitelmat olisi valmiina olemassa jotta varsinainen takuumittauslaitteisto pystytään rakentamaan nopeasti turbokoneen prototyypin valmistuttua. Lopuksi saadun mittausotannan käsitteleminen on myös selvempää, koska riittävät teoreettiset perusteet mittausaineiston käsittelemiseen on myös kerätty tähän työhön. Työssä käsiteltävän mittausjärjestelmän pääpaino on virtaus ja lämpöteknisillä mitta-uksilla. Myös sähköteknisiä mittauksia ja turbokoneen rakenteellisen toimivuuden mittauksia on käsitelty tässä työssä. Tässä diplomityö antaa kattavat perustiedot tarvittaviin mittausmenetelmiin ja miten varsinainen mittaustieto saadaan jalostettua vertailtavaan muotoon. Siinä käsitellään myös vaikeuksia joita toimivanmittausjärjestelmän kehittämisessä on otettava huo-mioon.
Resumo:
Background: Human immunodeficiency virus (HIV) prevalence in Switzerland is 0.4% and 30% of HIV patients are diagnosed with CD4 counts <200 cells/microliter. In 2010, the Swiss Federal Office of Public Health (SFOP) published updated guidelines regarding Physician- Initiated Counseling and Testing (PICT) for HIV. In the new guidelines, when acute HIV infection is suspected or HIV is among the differential diagnoses, an HIV test is performed without risk assessment nor prior counseling, unless the patient specifically refuses it. Counseling and verbal consent are still required when the patient asks for an HIV test or belongs to a high risk group. Whist HIV testing in the emergency departments (ED) is recommended, only 1% of patients are currently screened. Lack of awareness among physicians has been cited in the literature as the first barrier to guideline implementation. Objectives: To test if physicians working in EDs of 5 large teaching hospitals in western Switzerland, admitting 175,000 patients / year, were aware of the updated SFOP guidelines. Methods: A survey was delivered to 167 ED physicians in the summer of 2011. The survey consisted of 26 vignettes designed to test whether physicians would request an HIV test according to the new guidelines and if they knew when the PICT strategy was allowed or counseling required. Finally, physicians were asked the number of HIV tests they had requested in the previous 4 weeks, and if they were aware of the new HIV guidelines. Results are presented as mean and standard deviation, median and interquartile range (IQR), or as proportions; Student's t test was used to compare continuous variables; Results: 143 physicians returned the survey (86%); mean age was 32 ± 8 years, and median postgraduate experience of 6 years (IQR 3-12); 52% were male and 17% were attendings. The percentage of correct responses was 60 ± 13% with no difference between attendings and residents (p = 0.31); 2 of the 3 questions with the lowest scores were failure to recognize situations in which HIV testing was indicated, and the third one a failure to recognize acute HIV infection. 82% of physicians were not aware of the new guidelines. The median number of test requests was 1 (IQR 0-2, range 1-10). Conclusion: ED physicians are not aware of current HIV screening guidelines published by the SFOP, and rarely perform HIV tests. An information campaign is required if ED physicians are expected to play a significant role in the reduction of undiagnosed HIV patients.
Resumo:
It has been shown that for the reaction catalyzed by "biodegradative" L-threonine dehydratase from E. coli strains K-12 and 980 in 0.5 M phosphate-carbonate buffer, pH 8.4 and pH 9.5, the plots of initial reaction rate (v) versus the initial substrate concentration ([S]0 are characterized by several inflection points, i. e. an intermediate plateau. The plot of v versus the allosteric activator (AMP) concentration have very complicated shapes: there are several inflection points, and also the maximum at L-threonine concentration equal to 3-10(2) and 5-10(-2) M. High AMP concentrations inhibit the enzyme at high substrate concentrations. The reduced glutathion dose not influence the enzyme and does not alter the activating effect of AMP. On the basis of the data obtained it is proposed that the substrate and AMP shift the equilibrium between multiple oligomeric enzyme forms differing in catalytic activity and kinetic manifestations of allosteric interactions between the active and allosteric AMP-binding sites towards polymerization. Thus, the functioning the enzyme under study is discussed in the frames of the model of dissociating regulatory enzymes with multiple intermediate oligomeric forms.
Resumo:
Defining the degree of host specificity in host-parasite studies can greatly inform cophylogenetic history. In a recent paper, Guiller and Deunff (2010) cast doubt on some points and conclusions drawn from a cophylogenetic study between European bats and Spinturnicid mites (Bruyndonckx et al., 2009a). Here we answer their criticisms and discuss the notion of specificity in Spinturnicid mites.
Resumo:
CONTEXT: Increased altruism, self-transcendence, and quests for meaning in life (MiL) have been found in palliative care (PC) patients and their families who experience the finiteness of life. Similar changes were observed in healthy subjects who were experimentally confronted with their mortality. OBJECTIVES: The study investigated how daily experiences of the transitoriness of life influence PC health care professionals' (HCPs) values, MiL, and religiousness. METHODS: In a cross-sectional study, the Schwartz Value Survey, the Schedule for Meaning in Life Evaluation, and the Idler Index of Religiosity were used to investigate personal values, MiL, and private religiousness. HCPs working in PC (confronted with death) were compared with a control group of HCPs working at maternity wards (MWs) using multivariate models. Differences were considered to be statistically significant at P < 0.05. RESULTS: Seventy PC- and 70 MW-HCPs took part in the study (response rate 74.0%). No differences between the groups were found in overall MiL satisfaction scores. PC-HCPs were significantly more religious than MW-HCPs; they listed spirituality and nature experience more often as areas in which they experience MiL. Furthermore, hedonism was more important for PC-HCPs, and they had higher scores in openness-to-change values (stimulation and self-direction). MW-HCPs were more likely to list family as a MiL area. They assigned more importance to health and scored higher in conservation values (conformity and security). Duration of professional experience did not influence these results. CONCLUSION: Basic differences in values, MiL, and religiousness between PC-HCPs and MW-HCPs might have influenced the choice of working environment because no effect of job duration was observed. Longitudinal research is needed to confirm this hypothesis.
Resumo:
PURPOSE This prospective multicenter phase III study compared the efficacy and safety of a triple combination (bortezomib-thalidomide-dexamethasone [VTD]) versus a dual combination (thalidomide-dexamethasone [TD]) in patients with multiple myeloma (MM) progressing or relapsing after autologous stem-cell transplantation (ASCT). PATIENTS AND METHODS Overall, 269 patients were randomly assigned to receive bortezomib (1.3 mg/m(2) intravenous bolus) or no bortezomib for 1 year, in combination with thalidomide (200 mg per day orally) and dexamethasone (40 mg orally once a day on 4 days once every 3 weeks). Bortezomib was administered on days 1, 4, 8, and 11 with a 10-day rest period (day 12 to day 21) for eight cycles (6 months), and then on days 1, 8, 15, and 22 with a 20-day rest period (day 23 to day 42) for four cycles (6 months). Results Median time to progression (primary end point) was significantly longer with VTD than TD (19.5 v 13.8 months; hazard ratio, 0.59; 95% CI, 0.44 to 0.80; P = .001), the complete response plus near-complete response rate was higher (45% v 25%; P = .001), and the median duration of response was longer (17.2 v 13.4 months; P = .03). The 24-month survival rate was in favor of VTD (71% v 65%; P = .093). Grade 3 peripheral neuropathy was more frequent with VTD (29% v 12%; P = .001) as were the rates of grades 3 and 4 infection and thrombocytopenia. CONCLUSION VTD was more effective than TD in the treatment of patients with MM with progressive or relapsing disease post-ASCT but was associated with a higher incidence of grade 3 neurotoxicity.