Effect of substrate on the locomotion behaviour of the South American iguanian lizard Polychrus acutirostris

Arboreal and terrestrial habitats impose different constraints on tetrapod locomotion. We studied Polychrus acutirostris, a tree-dwelling lizard that also moves on the ground, in order to evaluate the effects of support incline and diameter on locomotion parameters. Limb movements of six specimens were filmed to quantify kinematic variables (velocity, stride frequency, stride length, and limb coordination) on distinct perch diameters (4.0, 1.5, 0.8 cm) and inclines (90, 45, and on level ground). The results show a notable slowness in arboreal habitat combined with a relatively fast locomotion when using the ground as temporary habitat. These animals developed walking trots mainly using lateral sequence. Non-symmetrical trots adopted at the highest velocities on the ground indicate difficulties of ""accommodation"" to the constraints imposed by this condition. Velocity generally decreases with the decreasing diameter, and with increasing incline, of the supports. Slowness, gaits favouring the body stability, elective role of the stride frequency in the modulation of the speed, and the role of the hindlimb in the force exchange to propel the body, constitute the main features of the locomotion pattern of P. acutirostris.

Matrix metalloproteinases, TIMPs and growth factors regulating ameloblastoma behaviour

Aims: Ameloblastoma is an odontogenic neoplasm with local invasiveness and recurrence. We have previously suggested that growth factors and matrix metalloproteinases (MMPs) influence ameloblastoma invasiveness(1). The aim was to study expression of MMPs, tissue inhibitor of metalloproteinases (TIMPs) and growth factors in ameloblastoma. Methods and results: Thirteen cases of solid/multicystic ameloblastoma were examined. As a control, calcifying cystic odontogenic tumour (CCOT), a non-invasive odontogenic neoplasm with ameloblastomatous epithelium was also studied. Immunohistochemistry detected MMPs, TIMPs and growth factors in ameloblastoma and CCOT. The labelling index (LI) of MMP-9 and TIMP-2 was significantly higher in ameloblastoma compared with CCOT. The LI of epidermal growth factor (EGF), transforming growth factor (TGF)-alpha and epidermal growth factor receptor (EGFR) was also increased in ameloblastoma. This neoplasm showed greater expression of MMPs, TIMPs and growth factors compared with CCOT. We then analysed these molecules in ameloblastoma cells and stroma. Ameloblastoma cells exhibited increased LI of MMP-1, -2 and EGFR. We found a positive correlation between EGF and TIMP-1, and between TGF-alpha and TIMP-2. It is known that signals generated by growth factors are transduced by the ERK pathway. Ameloblastoma stroma exhibited the phosphorylated (activated) form of ERK. Conclusions: These results suggest an interplay involving growth factors MMPs and TIMPs that may contribute to ameloblastoma behaviour. Signals generated by this molecular network would be transduced by ERK 1/2 pathway.

Large time behaviour for functional differential equations with dominant eigenvalues of arbitrary order

The spectral theory for linear autonomous neutral functional differential equations (FDE) yields explicit formulas for the large time behaviour of solutions. Our results are based on resolvent computations and Dunford calculus, applied to establish explicit formulas for the large time behaviour of solutions of FDE. We investigate in detail a class of two-dimensional systems of FDE. (C) 2009 Elsevier Inc. All rights reserved.

Temporal behaviour of toroidal rotation velocity in the TCABR tokamak

A new method for determining the temporal evolution of plasma rotation is reported in this work. The method is based upon the detection of two different portions of the spectral profile of a plasma impurity line, using a monochromator with two photomultipliers installed at the exit slits. The plasma rotation velocity is determined by the ratio of the two detected signals. The measured toroidal rotation velocities of C III (4647.4 angstrom) and C VI (5290.6 angstrom), at different radial positions in TCABR discharges, show good agreement, within experimental uncertainty, with previous results (Severo et al 2003 Nucl. Fusion 43 1047). In particular, they confirm that the plasma core rotates in the direction opposite to the plasma current, while near the plasma edge (r/a > 0.9) the rotation is in the same direction. This technique was also used to investigate the dependence of toroidal rotation on the poloidal position of gas puffing. The results show that there is no dependence for the plasma core, while for plasma edge (r/a > 0.9) some dependence is observed.

Optical and dielectric relaxor behaviour of Ba(Zr(0.25)Ti(0.75))O(3) ceramic explained by means of distorted clusters

In this work, Ba(Zr(0.25)Ti(0.75))O(3) ceramic was prepared by solid-state reaction. This material was characterized by x-ray diffraction and Fourier transform Raman spectroscopy. The temperature dependent dielectric properties were investigated in the frequency range from 1 kHz to 1 MHz. The dielectric measurements indicated a diffuse phase transition. The broadening of the dielectric permittivity in the frequency range as well as its shifting at higher temperatures indicated a relaxor-like behaviour for this material. The diffusivity and the relaxation strength were estimated using the modified Curie-Weiss law. The optical properties were analysed by ultraviolet-visible (UV-vis) absorption spectroscopy and photoluminescence (PL) measurements at room temperature. The UV-vis spectrum indicated that the Ba(Zr(0.25)Ti(0.75))O(3) ceramic has an optical band gap of 2.98 eV. A blue PL emission was observed for this compound when excited with 350 nm wavelength. The polarity as well as the PL property of this material was attributed to the presence of polar [TiO(6)] distorted clusters into a globally cubic matrix.

Rock magnetism in soils of the Pampean plain. Buenos Aires province, Argentina. Linking climate and magnetic behaviour

Results of the study of Argiudolls in two localities (Zarate and Veronica) of the Pampean plain, Argentina, are presented in this contribution. This is a typical area covered by loess. The magnetic studies carried out allowed to determine the presence of detrital magnetite and titanomagnetite, as well as maghemite, pedogenic goethite and superparamagnetic particles (SP). In Veronica soils, a depletion of ferromagnetic minerals is recorded The dominant process in these soils has been the reductive loss of detrital magnetite and titanomagnetite. This is associated with a greater degree of evolution of the soil, which is determined by the concentration and type of detected clays. The higher clay concentration in these soils facilitated reducing conditions and a greater loss of detrital magnetic particles. The loss is reinforced under poor drainage conditions. In the poorly drained soil of Zarate, a concentration of magnetic particles is observed in the Bt horizon, which is associated with an illuviation process. The well drained soil of the same locality shows neoformation of SP particles. These particles would have an ephemeral life until a new wet period in the annual cycle occurs. Although some characteristics of the magnetic signal appear reinforced by the conditions of drainage, this aspect does not seem to be too significant, at least in the Pampean region with low topographic gradients.

Short-time behaviour of demand and price viewed through an exactly solvable model for heterogeneous interacting market agents

We introduce a stochastic heterogeneous interacting-agent model for the short-time non-equilibrium evolution of excess demand and price in a stylized asset market. We consider a combination of social interaction within peer groups and individually heterogeneous fundamentalist trading decisions which take into account the market price and the perceived fundamental value of the asset. The resulting excess demand is coupled to the market price. Rigorous analysis reveals that this feedback may lead to price oscillations, a single bounce, or monotonic price behaviour. The model is a rare example of an analytically tractable interacting-agent model which allows LIS to deduce in detail the origin of these different collective patterns. For a natural choice of initial distribution, the results are independent of the graph structure that models the peer network of agents whose decisions influence each other. (C) 2009 Elsevier B.V. All rights reserved.

Behaviour of TiO(2)-SiMgO(x) hybrid composites on the solar photocatalytic degradation of polluted air

The photocatalytic performance of TiO(2)-SiMgO(x) ceramic plates for trichloroethylene abatement in gas phase has been evaluated under sun irradiance conditions. A continuous flow Pyrex glass reactor fixed on the focus of a compound parabolic collector has been used. The performance of the hybrid photocatalyst has been evaluated as the variation of TCE conversion and reaction products formation with the solar irradiance at different total gas flow, TCE concentration, and water vapour content. SiMgO(x) not only provides adsorbent properties to the photocatalyst, but it also allows the effective use of the material during low solar irradiance conditions. The adsorption-desorption phenomena play a pivotal role in the behaviour of the system. Thus, TCE conversion curves present two different branches when the sun irradiance increases (sunrise) or decreases (sunset). CO(2), COCl(2) and DCAC were the most relevant products detected. Meanwhile CO(2) concentration was insensitive to the branch analysed, COCl(2) or DCAC were not indicating the ability of these compounds to be adsorbed on the composite. An increase of the UV irradiation at total TCE conversion promotes the CO(2) selectivity. The excess of energy arriving to the reactor favours the direct reaction pathway to produce CO(2). The photonic efficiency, calculated as a function of the rate of CO(2) formation, decreases linearly with the solar irradiance up to around 2 mW cm(-2), where it becomes constant. For decontamination systems high TCE conversion is pursuit and then high solar irradiance values are required, in spite of lower photonic efficiency values. The present photocatalyst configuration, with only 17% of the reactor volume filled with the photoactive material, allows total TCE conversion for 150 ppm and 1 L min(-1) in a wide sun irradiance window from 2 to 4 mW cm(-2). The incorporation of water vapour leads to an increase of the CO(2) selectivity keeping the TCE conversion around 90%, although significant amounts of COCl(2) were observed. (c) 2010 Elsevier B.V. All rights reserved.

Electrochemical Behaviour of the AA2024 Aluminium Alloy Modified with Self-Assembled Monolayers/Polyaniline Double Films

The electrochemical characteristics of the AA2024 aluminium alloy modified with octadecyltrimethoxysilane (ODTMS) + polyaniline (PANi) and propiltrimethoxysilane (PTMS) + (PANi) were studied in the present work. The results show that the different protective coatings shift the values of corrosion and pit potentials to more positive values making the system nobler and indicate that the double film ODTMS + PANi present the best protection against corrosion characteristics, that is probably due to the two contributions: anodic protection associated with the barrier effect.

Pupils' Interaction with the Exhibits According to the Learning Behaviour Model

Science centres are one of the best opportunities for informal study of natural science. There are many advantages to learn in the science centres compared with the traditional methods: it is possible to motivate and supply visitors with the social experience, to improve people’s understandings and attitudes, thereby bringing on and attaching wider interest towards natural science. In the science centres, pupils show interest, enthusiasm, motivation, self-confidence, sensitiveness and also they are more open and eager to learn. Traditional school-classes however mostly do not favour these capabilities. This research presents the qualitative study in the science centre. Data was gathered from observations and interviews at Science North science centre in Canada. Pupils’ learning behaviours were studied at different exhibits in the science centre. Learning behaviours are classified as follows: labels reading, experimenting with the exhibits, observing others or exhibit, using guide, repeating the activity, positive emotional response, acknowledged relevance, seeking and sharing information. In this research, it became clear that in general pupils do not read labels; in most cases pupils do not use the guides help; pupils prefer exhibits that enable high level of interactivity; pupils display more learning behaviours at exhibits that enable a high level of interactivity.

Vad påverkar föräldrars sätt att tillgodose barns behov av regelbundet umgänge? : En applikation på Theory of Planned Behaviour

Föreliggande undersökning var en attitydundersökning baserad på Theory of Planned Behaviour där attityd, subjektiv norm, upplevd kontroll samt intention anses kunna predicera beteende. Syftet med undersökningen är försöka ta reda på vilka faktorer som påverkar hur mycket tid man som förälder umgås med sina barn efter en separation eller skilsmässa eftersom många barn i den situationen förlorar kontakten med den ena föräldern. 36 försöksdeltagare besvarade ett frågeformulär bestående av 31 frågor och påståenden gällande umgänge. Resultaten visar att tiden man som förälder umgås med sina barn efter en skilsmässa beror på intention och upplevd kontroll. Intentionen förklaras av upplevd kontroll och dom förväntningar man upplever från omgivningen. Attityden hade endast liten betydelse i modellen.

Behaviour of Surface Defects in Wire Rod Rolling

Defects are often present in rolled products, such as wire rod. The markets demand for wire rod without any defects has increased. In the final wire rod products, defects originating from the steel making, casting, pre-rolling of billets and during the wire rod rolling can appear. In this work, artificial V-shaped longitudinal surface cracks has been analysed experimentally and by means of FEM. The results indicate that the experiments and FEM calculations show the same tendency except in two cases, where instability due to a fairly “round” false round bars disturbed the experiment. FE studies in combination with practical experiments are necessary in order to understand the behaviour of the material flows in the groove and to explain whether the crack will open up as a V-shape or if it will be closed as an I-shape.

Att bli, att vara och att ha varit - om ingångar i och utgångar ur Jehovas vittnen i Sverige

Summary To become, to be and to have been: about the  Jehovah’s Witnesses The Watchtower Bible and Tract Society, in the following text referred to as the Jehovah’s Witnesses or “the organisation”, is a worldwide Christian organisation with about 6.7 million members. The organisation has many times, without any success so far, proclaimed Armageddon when they expect Jehovah to return to Earth. They interpret the Bible in their own, often very literal way, and require their members to live according to these interpretations. Among the consequences of this, members are forbidden to vote, to do military service or to receive blood transfusions. Apart from attending the three weekly meetings, members are expected to be active in missionary work, known as “publishing”. If a member fails to do a certain number of hours’ publishing, he or she risks being deprived of active membership status Sweden in general is considered to be a society where the population is not very religious. The formerly state-governed Lutheran church has lost its influence and the vast majority of ordinary Swedes do not visit church on other occasions than weddings, funerals or christenings. Expressing one’s own religious values has become somewhat of a private matter where publicity is seldom appreciated, which is contrary to the practice of the Jehovah’s Witnesses. This is one of the reasons why the Jehovah’s Witnesses are commonly perceived by average Swedes as a “suspicious” religious organisation. The aim and methods of the study This dissertation seeks to describe and investigate the entering and leaving of a highly structured and hierarchical religious community, exemplified in this case by the Jehovah’s Witnesses. What are the thoughts and aspirations of someone who is considering becoming a Jehovah’s Witness? What are the priorities and what experiences seem important when a person is going through such a process? And when this person has finally reached his or her goal of becoming a member, is it the same motivation that makes him or her stay in the organisation for longer periods of time, possibly for the rest of their lives, or does it change during the process of entering, or does this motivation change its character during the transition from entering to being a regular member? Why do some of the members change their attitude to the Jehovah’s Witnesses from rejoicing to bitterness? And how does this process of exit manifest itself? In what way is it different from the process of entry? The respondents in this study were chosen from both active members of the Jehovah’s Witnesses in Sweden and those who have left the organisation for personal reasons. Repeated interviews with ten active members of the organisation have been conducted in the course of the study and compared to equal numbers of former members. The interviews have been semi-structured to deal with questions of how a person has come into contact with the organisation; how they retrospectively experienced the process of entry; the reasons for becoming a member. Questions have also been asked about life in the organisation. The group of “exiters” have also been asked about the experience of leaving, why they wanted to leave, and how this process was started and carried out. In addition to this I have analysed a four-year diary describing the time inside and the process of leaving the organisation. This has given me an extra psychological insight into the inner experience of someone who has gone through the whole process. The analysis has been done by categorising the content of the transcribed interviews. An attempt to outline a model of an entry and exit process has been made, based on ideas and interpretations presented in the interviews. The analysis of the diary has involved thorough reading, resulting in a division of it into four different parts, where each part has been given a certain key-word, signifying the author’s emotional state when writing it. A great deal of the information about the Jehovah’s Witnesses has been collected through discussion boards on the Internet, informal talks with members and ex-members, interviews with representatives of the organisations during visits to its different offices (Bethels), such as St. Petersburg, Russia, and Brooklyn, New York, USA. The context Each organisation evolves in its own context with its own norms, roles and stories that would not survive outside it. With this as a starting point, there is a chapter dedicated to the description of the organisation’s history, structure and activities. It has been stated that the organisation’s treatment of its critical members and the strategies for recruiting new members have evolved over the years of its history. At the beginning there was an openness allowing members to be critical. As the structure of the organisation has become more rigid and formalised, the treatment of internal critics has become much less tolerated and exclusion has become a frequent option. As a rule many new members have been attracted to the organisation when (1) the day of Armageddon has been pronounced to be approaching; (2) the members of the organisation have been persecuted or threatened with persecution; and (3) the organisation has discovered a “new market”. The processes for entering and exiting How the entering processes manifest themselves depends on whether the person has been brought up in the organisation or not. A person converting as an adult has to pass six phases before being considered a Jehovah’s Witness by the organisation. These are:  Contact with the Jehovah’s Witnesses, Studying the bible with members of the organisation, Questioning, Accepting, Being active as publisher (spreading the belief), Being baptised.  For a person brought up in the organisation, the process to full membership is much shorter:   Upbringing in the organisation, Taking a stand on the belief, Being baptised. The exit process contains of seven phases:   Different levels of doubts, Testing of doubts, Turning points, Different kinds of decisions, Different steps in executing the decisions, Floating, a period of emotional and cognitive consideration of membership and its experiences, Realtive neutrality.   The process in and the process out are both slow and are accompanied with anguish and doubts. When a person is going through the process in or out of the organisation he or she experiences criticism. This is when people around the adept question the decision to continue in the process. The result of the criticism depends on where in the process the person is. If he or she is at the beginning of the process, the criticism will probably make the person insecure and the process will slow down or stop. If the criticism is pronounced in a later phase, the process will probably speed up. The norms of the organisation affect the behaviour of the members. There are techniques for inclusion that both bind members to the organisation and shield them off from the surrounding society. Examples of techniques for inclusion are the “work situation” and “closed doors”. The work situation signifies that members who do as the organisation recommends – doing simple work – often end up in the same branch of industry as many other Jehovah’s Witnesses. This often means that the person has other witnesses as workmates. If the person is unemployed or moves to another town it is easy to find a new job through connections in the organisation. Doubts and exclusions can lead to problems since they entail a risk of losing one’s job. This can also result in problems getting a new job. Jehovah’s Witnesses are not supposed to talk to excluded members, which of course mean difficulties working together. “Closed doors” means that members who do as the organisation recommends – not pursuing higher education, not engaging in civil society, working with a manual or in other way simple job, putting much time into the organisation – will, after a long life in the organisation, have problems starting a new life outside the Jehovah’s Witnesses. The language used in the organisation shows the community among the members, thus the language is one of the most important symbols. A special way of thinking is created through the language. It binds members to the organisation and sometimes it can work as a way to get back into the normative world of the organisation. Randall Collins’s (1990, 2004) thoughts about “emotional energy” have enabled an understanding of the solidarity and unity in the organisation. This also gives an understanding of the way the members treat doubting and critical members. The members who want to exit have to open up the binding/screening off. A possible way to do that is through language, to become aware of the effect the language might have. Another way is to search for emotional energy in another situation. During the exit process, shame might be of some importance. When members become aware of the shame they feel, because they perceive they are “acting a belief”, the exit process might accelerate.

Wear of coated and uncoated PCBN cutting tool used in turning and milling

This licentiate thesis has the main focus on evaluation of the wear of coated and uncoated polycrystalline cubic boron nitride cutting tool used in cutting operations against hardened steel. And to exam the surface finish and integrity of the work material used. Harder work material, higher cutting speed and cost reductions result in the development of harder and more wear resistance cutting tools. Although PCBN cutting tools have been used in over 30 years, little work have been done on PVD coated PCBN cutting tools. Therefore hard turning and hard milling experiments with PVD coated and uncoated cutting tools have been performed and evaluated. The coatings used in the present study are TiSiN and TiAlN. The wear scar and surface integrity have been examined with help of several different characterization techniques, for example scanning electron microscopy and Auger electron spectroscopy.   The results showed that the PCBN cutting tools used displayed crater wear, flank wear and edge micro chipping. While the influence of the coating on the crater and flank wear was very small and the coating showed a high tendency to spalling. Scratch testing of coated PCBN showed that, the TiAlN coating resulted in major adhesive fractures. This displays the importance of understanding the effect of different types of lapping/grinding processes in the pre-treatment of hard and super hard substrate materials and the amount and type of damage that they can create. For the cutting tools used in turning, patches of a adhered layer, mainly consisting of FexOy were shown at both the crater and flank. And for the cutting tools used in milling a tribofilm consisting of SixOy covered the crater. A combination of tribochemical reactions, adhesive wear and mild abrasive wear is believed to control the flank and crater wear of the PCBN cutting tools. On a microscopic scale the difference phases of the PCBN cutting tool used in turning showed different wear characteristics. The machined surface of the work material showed a smooth surface with a Ra-value in the range of 100-200 nm for the turned surface and 100-150 nm for the milled surface. With increasing crater and flank wear in combination with edge chipping the machined surface becomes rougher and showed a higher Ra-value. For the cutting tools used in milling the tendency to micro edge chipping was significant higher when milling the tools steels showing a higher hard phase content and a lower heat conductivity resulting in higher mechanical and thermal stresses at the cutting edge.

To what extent are CO2 emissions from intra-urban shopping trips by cars affected by drivers’ travel behaviour and store location?

Transportation is seen as one of the major sources of CO2 pollutants nowadays. The impact of increased transport in retailing should not be underestimated. Most previous studies have focused on transportation and underlying trips, in general, while very few studies have addressed the specific affects that, for instance, intra-city shopping trips generate. Furthermore, most of the existing methods used to estimate emission are based on macro-data designed to generate national or regional inventory projections. There is a lack of studies using micro-data based methods that are able to distinguish between driver behaviour and the locational effects induced by shopping trips, which is an important precondition for energy efficient urban planning. The aim of this study is to implement a micro-data method to estimate and compare CO2 emission induced by intra-urban car travelling to a retail destination of durable goods (DG), and non-durable goods (NDG). We estimate the emissions from aspects of travel behaviour and store location. The study is conducted by means of a case study in the city of Borlänge, where GPS tracking data on intra-urban car travel is collected from 250 households. We find that a behavioural change during a trip towards a CO2 optimal travelling by car has the potential to decrease emission to 36% (DG), and to 25% (NDG) of the emissions induced by car-travelling shopping trips today. There is also a potential of reducing CO2 emissions induced by intra-urban shopping trips due to poor location by 54%, and if the consumer selected the closest of 8 existing stores, the CO2 emissions would be reduced by 37% of the current emission induced by NDG shopping trips.