Histological analysis of healing process after rat teeth replantation maintained in Resveratrol dissolved in dimethyl sufoxide (DMSO)

Tissue repair after replantation of avulsed teeth is directly related to the extent of damage to the cells of the periodontal ligament. Thus, immediate replantation is the treatment of choice for avulsed permanent teeth. To achieve more favorable prognostics, adequate storage media must be used to preserve periodontal ligament cells. A series of storage media are studied and show good results, such as saliva, milk, Hank's balanced solution (HBSS) and ViaSpan. However, recent studies were performed using news and promising storage media. Resveratrol has been extensively studied because of its antioxidant properties and its ability to prolong life of many organisms from yeast to mammals. One of its limitations is its poor solubility in aqueous vehicles. For this reason, the aim of this study was to evaluate the healing repair process after replantation of teeth of rats kept in Resveratrol using dimethyl sulfoxide (DMSO) as a vehicle. This study was approved by the Ethics Committee on Research with Animals, of the School of Dentistry of Araçatuba, Univ. Estadual Paulista, UNESP, Araçatuba, SP, Brazil. Were used 40 male rats, under general anesthesia upper right incisor were extracted and replanted. Treatments were done, dividing in four groups, of 10 animals each. In group I, the teeth were be extracted and immediately replanted into their sockets of origin (positive control). In group II, the teeth were immersed in 50 mL of resveratrol in DMSO (0.0512 g / ml) for 60 minutes. In group III teeth were kept for 60 minutes in 50 ml of DMSO. In group IV, the teeth were kept in dry for the same period (negative control). Then the teeth of animals in Groups II, III and IV were replanted in their sockets. Systemic antibiotics were administrated in all groups, and 60 days post-operative the animals were euthanized. The specimens were processed and stained in HE for histomorphological analysis. The results showed that resveratrol as storage media, was not able to improve the rep

Reconstruction of maxillary ridge atrophy caused by sequela of dentoalveolar trauma with autogenous bone graft harvested from mentum

Dentoalveolar traumatisms, particularly those that affect the anterior teeth, interfere adversely in the patient s life.Among them, tooth avulsion is pointed out because it is characterized as a complex injury that affects multiple tissues, andbecause there is no effective treatment available for its resolution with a stable long-term outcome.Aim/Hypothesis: The aim of the present study was to relate a clinical case of complete reconstruction of atrophy of the alveolarbone corresponding to tooth 11, lost by tooth resorption 10 years after the tooth reimplantation procedure.Material and methods: Reconstruction was performed with autogenous bone harvested from the mentum donor site. Surgicalaccess began in the receptor area with a Newman mucoperiosteal incision using a scalpel blade 15 mounted in a scalpel handlefor detachment and exposure of the receptor site. Extensive bone resorption was observed in the vestibular-palatine direction,proved by the thinness of the receptor bed. Decorticalization of the vestibular bone plate was performed. After preparing thereceptor bed, and incision was made in the mucosa in the depth of the anterior vestibular fornix, then a perpendicular muscleperiostealincision to detach and exposure the donor area. The bone graft necessary for reconstruction of the donor area wasdelimited, followed by monocortical osteotomy and the monocortical graft was removed. The next stage was to perform shapingfor passive graft accommodation and fixation by means of two bicortical screws. After fixation of the graft the sharp angles wererounded off in order to avoid possible exposure and/or fenestrations of the reconstructed area, then the receptor and donor areawere sutured. After the 6-month period to allow incorporation of the autogenous graft, an osseointegrated dental implant wasinserted. At the end of the 6-month period of waiting for osseointegration to occur, the process of fabricating the screw-retainedmetal ceramic

Avaliação histomorfométrica dos efeitos da movimentação dentária induzida sobre molares de ratos submetidos à luxação extrusiva

Pós-graduação em Odontologia - FOA

Análise histológica e imunoistoquímica do tecido pulpar de ratos Wistar submetidos a procedimento clareador com duas concentrações de peróxido de hidrogênio

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Descrição anatômica das estruturas osteoarticulares do esqueleto axial do tatu-galinha (Dasypus novemcinctus Linnaeus, 1758) por meio da radiografia e tomografia computadorizada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Postura de trabalho relacionada com as dores na coluna vertebral em trabalhadores de uma indústria de alimentos: estudo de caso

This study has as main objective to identify the complains occurrences about pain in the spine segments, that are related to work standing posture, adopted by the collaborators in the production section of a food industry, in the city of Marília São Paulo state. A descriptive research and studying case was made, using 30 employees as a sample. It was used as methodological procedure, a questionnaire to obtain information on professional and personal data, posture to remain standing, the most uncomfortable postures in the work environment (signed by the form of Ranney, 2000) and pain (pointed out by Corllet and Manenica Diagram, 1980). It was also used the Nordic questionnaire (Kuorioka et al.,1986), validated in the Brazilian culture by Barros e Alexandre (2003) and adapted for the study, the direct evaluation and, a direct observation was made in the production work, a posture analysis using the OWAS Method. It was noticed that the posture of standing up is adopted during work, and 73.3% of the people that was interviewed said that they felt tired in consequence of this posture, especially when associated with trunk twists, trunk inclination and elevation of their arms above their heads. Most complains regarding pain through their bodies, by Corllet e Manenica (1980) pointed to the lumbar region, followed in the dorsal area and legs and in the neck area, shoulders and right thigh. The adapted Nordic questionnaire reveled the lumbar area, in 10 interviewed people (33.3%) as the area mostaffected by musculoskeletal symptoms, next in the dorsal area, with five people interviewed (16.7%) and one of them (3.3%) felt pain in the cervical area, none reported pain in the hips area. The postural analysis was applied using OWAS method, and it was identified the postures that demanded more effort in the four levels of musculoskeletal injuries. As conclusion, the standing up posture and the asymmetric and incorrect movements are related to pain in the spine, mostly in the lumbar area.

Sensação térmica do pedestre

This study has as main objective to identify the complains occurrences about pain in the spine segments, that are related to work standing posture, adopted by the collaborators in the production section of a food industry, in the city of Marília São Paulo state. A descriptive research and studying case was made, using 30 employees as a sample. It was used as methodological procedure, a questionnaire to obtain information on professional and personal data, posture to remain standing, the most uncomfortable postures in the work environment (signed by the form of Ranney, 2000) and pain (pointed out by Corllet and Manenica Diagram, 1980). It was also used the Nordic questionnaire (Kuorioka et al.,1986), validated in the Brazilian culture by Barros e Alexandre (2003) and adapted for the study, the direct evaluation and, a direct observation was made in the production work, a posture analysis using the OWAS Method. It was noticed that the posture of standing up is adopted during work, and 73.3% of the people that was interviewed said that they felt tired in consequence of this posture, especially when associated with trunk twists, trunk inclination and elevation of their arms above their heads. Most complains regarding pain through their bodies, by Corllet e Manenica (1980) pointed to the lumbar region, followed in the dorsal area and legs and in the neck area, shoulders and right thigh. The adapted Nordic questionnaire reveled the lumbar area, in 10 interviewed people (33.3%) as the area mostaffected by musculoskeletal symptoms, next in the dorsal area, with five people interviewed (16.7%) and one of them (3.3%) felt pain in the cervical area, none reported pain in the hips area. The postural analysis was applied using OWAS method, and it was identified the postures that demanded more effort in the four levels of musculoskeletal injuries. As conclusion, the standing up posture and the asymmetric and incorrect movements are related to pain in the spine, mostly in the lumbar area.

Estudo mielográfico comparativo entre meios de contraste iopamidol e ioexol em bezerros

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da ação de derivados semi-sintéticos de curcumina em linhagens celulares de câncer humano

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência da via mTOR no processo de remodelação cardíaca induzida pelo ácido retinóico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Development of a Model of Natural Infection with Mycobacterium bovis in White-Tailed Deer

The objective of this study was to develop a suitable experimental model of natural Mycobacterium bovis infection in white-tailed deer (Odocoileus virginianus), describe the distribution and character of tuberculous lesions, and to examine possible routes of disease transmission. In October 1997, 10 mature female white-tailed deer were inoculated by intratonsilar instillation of 2 3 103 (low dose) or 2 3 105 (high dose) colony forming units (CFU) of M. bovis. In January 1998, deer were euthanatized, examined, and tissues were collected 84 to 87 days post inoculation. Possible routes of disease transmission were evaluated by culture of nasal, oral, tonsilar, and rectal swabs at various times during the study. Gross and microscopic lesions consistent with tuberculosis were most commonly seen in medial retropharyngeal lymph nodes and lung in both dosage groups. Other tissues containing tuberculous lesions included tonsil, trachea, liver, and kidney as well as lateral retropharyngeal, mandibular, parotid, tracheobronchial, mediastinal, hepatic, mesenteric, superficial cervical, and iliac lymph nodes. Mycobacterium bovis was isolated from tonsilar swabs from 8 of 9 deer from both dosage groups at least once 14 to 87 days after inoculation. Mycobacterium bovis was isolated from oral swabs 63 and 80 days after inoculation from one of three deer in the low dose group and none of four deer in the high dose group. Similarly, M. bovis was isolated from nasal swabs 80 and 85 days after inoculation in one of three deer from the low dose group and 63 and 80 days after inoculation from two of four deer in the high dose group. Intratonsilar inoculation with M. bovis results in lesions similar to those seen in naturally infected white-tailed deer; therefore, it represents a suitable model of natural infection. These results also indicate that M. bovis persists in tonsilar crypts for prolonged periods and can be shed in saliva and nasal secretions. These infected fluids represent a likely route of disease transmission to other animals or humans.

Tuberculin Skin Testing in White-Tailed Deer (Odocoileus virginianus)

The comparative cervical skin test for antemortem diagnosis of tuberculosis was done 169 times on 116 different white-tailed deer of known Mycobacterium bovis infection status. The sensitivity and specificity were 97 and 81%, respectively. The magnitude of change in skin thickness at test sites was not significantly influenced by dosage of inoculum, dissemination of the disease process, or repeated skin testing. However, the magnitude of change in skin thickness was significantly greater in deer infected for less than 109 days than in deer infected for more than 109 days. As used in the present study, the comparative cervical skin test is a sensitive method of antemortem diagnosis of M. bovis infection in white-tailed deer.

Influência da via mTOR no processo de remodelação cardíaca induzida pelo ácido retinóico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Feasibility of Intralaminar, Lateral Mass, or Pedicle Axis Vertebra Screws in Children Under 10 Years of Age: A Tomographic Study

BACKGROUND: There are several techniques for screw insertion in upper cervical spine surgery, and the use of the 3.5-mm screw is usually the standard. However, there is no consensus regarding the feasibility of using these screws in the pediatric population. OBJECTIVE: To determine the measurement of the lamina angle, lamina and pedicle length and thickness, and lateral mass length of the topographic axial view of the axis vertebra of 2- to 10-year-old children to guide the use of surgical screws. METHODS: Seventy-five computed tomography scans from 24- to 120-month-old patients were studied. Measurements were taken in an axial view of C2 and correlated with 2 age groups and both sexes. Statistical analysis was performed with the Student t test. RESULTS: In the 24- to 48-month age group, only 5.5% of the lamina and 8.3% of the pedicles had thicknesses < 3.5 mm. In the 49- to 120-month age group, there were no lamina thickness values < 3.5 mm, and 1.2% of pedicle thicknesses were < 3.5 mm. Both age groups had no lamina and pedicle lengths < 12 mm and no lateral mass lengths > 12 mm. CONCLUSION: In the majority of cases, the use of 3.5-mm lamina and pedicle screws in children is feasible. A base value of 45 degrees for the spinolaminar angle can be adopted as a reference for insertion of screws in the C2 lamina. This information can be particularly useful for decision making during preoperative planning for C1-C2 or craniocervical arthrodesis in children.

TOMOGRAPHIC ANALYSIS FOR C2 SCREW PLACEMENT IN RHEUMATOID ARTHRITIS PATIENTS

Objective: A morphological analysis of the bone structure of 02 in patients with rheumatoid arthritis in order to enhance the security of the stabilization procedures for this vertebra. Methods: We retrospectively analyzed 20 CT scans of the cervical spine performed in patients with rheumatoid arthritis; the following parameters were measured: spinolaminar angle, thickness and length of C2 lamina. Results: The mean values are: 5.92mm and 5.87mm for thickness of right and left laminae retrospectively, 27.75mm for right lamina length and 27.94mm for left lamina length, and 44.7 degrees for spinolaminar angle. Conclusion: The values obtained are consistent with studies in normal subjects published by other groups, with no apparent need for change in the screw placement technique. Level of Evidence IV, Case Series.