Bord Gais Above Ground Installation:Flow

The objective was to design a treatment that would dematerialise an above ground gas installation on the Liffey quayside while still meeting the functional requirement to ventilate the pressure reducing chamber inside. To do this we wrapped the installation in a skin of glass that allows the air to enter below the skin and to escape behind the parapet. The installation building is covered in plastic sequins and the glass is treated with alternating bands of dichroic film. The flow of air causes the sequins to shimmer reflecting spots of coloured light back onto the glass. At night a similar effect is created by lighting concealed within the outer skin. This project won a commendation in the RIAI Awards 2010, and an AAI award in 2011. It was published in New Irish Architecture 26. The British architectural historian William JR Curtis described it as ‘a beautiful understated little kiosk.’

Sounds of the City

“Sounds of the City” is a large-scale community project and exhibition commissioned by the Metropolitan Arts Centre (MAC) and led by artists from the Sonic Arts Research Centre (SARC), Queen’s University Belfast. Over a four-month period, the artists worked together with two intergenerational groups in Belfast with the aim of addressing specific sound qualities of places, events and stories. Themes that surfaced from this process constitute the basis for the exhibition which promotes listening as a form of intersecting daily life, identity and memory. Five installations address aural contexts ranging from Belfast’s industrial heritage to the local family home. These are shaped by present and past experiences of workshop participants at Dee Street Community Centre in East Belfast and Tar Isteach in North Belfast. The themes and contents of these installations center upon the relationship between sound and memory, sound and place, and the documentation of everyday personal auditory experience.
All materials exhibited have emerged through workshops, interviews and field-recording sessions. Workshops acted as a basis from which to inform each group about the project’s aims, methods of listening, methods of documenting sound and the wider areas of soundscape studies and acoustic ecology. They also provided a central point allowing participants to organize outside activities and share material for exhibition.
“Sounds of the City” explores the relationship between sound and community through everyday life and presents a dynamic and ever-changing soundscape that shapes Belfast’s identity.

Sounds of the City has been exhibited at the MAC, Belfast 2012 and at Espaço Ecco, Brasilia 2013.

So Great Is Their Love

A soundscape composition intended for installation in a sound art exhibition. This short project is a contribution to practice-led research that questions that nature of authorial identity, and the composer's responsibility for the sounds produced. First made public in The Braid, Ballymena, 25 September 2013

Portrush: Architecture for the North Irish Coast

The North Irish coast resembles one of the unique landscapes that define the scenic character of the place. To understand place you need to engage with stories and histories behind it. The search for Portrush has to start from Ulster. This book offers a journey to explore histories, traditions, festivities and the architecture of the Irish town. Approaching Portrush as a field of experimental architectural studio, the studio at Queen’s University Belfast teamed up to rediscover the Irish coastal condition and have a rethink about the origins and ingredients of Irish architecture and landscape. This book records and discusses this ambitious project and its outcome. Divided into two parts, the book introduces a comprehensive contextual and historical investigation into the heritage, culture and architecture followed by a display of students’ theoretical encounters and designs.

Early Implementation of Building Information Modeling into a Cold-Formed Steel Company: Providing Novel Project Management Techniques and Solutions to Industry

The ability of building information modeling (BIM) to positively impact projects in the AEC through greater collaboration and integration is widely acknowledged. This paper aims to examine the development of BIM and how it can contribute to the cold-formed steel (CFS) building industry. This is achieved through the adoption of a qualitative methodology encompassing a literature review, exploratory interviews with industry experts, culminating in the development of e-learning material for the sector. In doing so, the research team have collaborated with one of the United Kingdom’s largest cold-formed steel designer/fabricators. By demonstrating the capabilities of BIM software and providing technical and informative videos in its creation, this project has found two key outcomes. Firstly, to provide invaluable assistance in the transition from traditional processes to a fully collaborative 3D BIM as required by the UK Government under the “Government Construction Strategy” by 2016 in all public sector projects. Secondly, to demonstrate BIM’s potential not only within CFS companies, but also within the AEC sector as a whole. As the flexibility, adaptability and interoperability of BIM software is alluded to, the results indicate that the introduction and development of BIM and the underlying ethos suggests that it is a key tool in the development of the industry as a whole.

TEXTILE TECHNOLOGIES IN CONCRETE ENVIRONMENTS."

Girli Concrete is a cross disciplinary funded research project based in the University of Ulster involving a textile designer/ researcher, an architect/ academic and a concrete manufacturing firm.
Girli Concrete brings together concrete and textile technologies, testing ideas of
concrete as textile and textile as structure. It challenges the perception of textiles as only the ‘dressing’ to structure and instead integrates textile technologies into the products of building products. Girli Concrete uses ‘low tech’ methods of wet and dry concrete casting in combination with ‘high tech’ textile methods using laser cutting, etching, flocking and digital printing. Whilst we have been inspired by recent print and imprint techniques in architectural cladding, Girli Concrete is generated within the depth of the concrete’s cement paste “skin”, bringing the trades and crafts of both industries together with innovative results.
Architecture and Textiles have an odd, somewhat unresolved relationship. Confined to a subservient role in architecture, textiles exist chiefly within the categories of soft furnishings and interior design. Girli Concrete aims to mainstream tactility in the production of built environment products, raising the human and environmental interface to the same specification level as the technical. This paper will chart:
The background and wider theoretical concerns to the project.
The development of Girli Concrete, highlighting the areas where craft becomes
art and art becomes science in the combination of textile and concrete
technologies.
The challenges of identifying funding to support such combination technologies,
working methods and philosophies.
The challenges of generating and sustaining practice within an academic
research environment
The outcomes to date

Multi-standard sub-pixel interpolation architecture for video motion estimation

A new domain-specific reconfigurable sub-pixel interpolation architecture for multi-standard video Motion Estimation (ME) is presented. The mixed use of parallel and serial-input FIR filters achieves high throughput rate and efficient silicon utilisation. Flexibility has been achieved by using a multiplexed reconfigurable data-path controlled by a selection signal. Silicon design studies show that this can be implemented using 34.8K gates with area and performance that compares very favourably with existing fixed solutions based solely on the H.264 standard. ©2008 IEEE.

Bus Transportation – Córas Iompair Éireann and Michael Scott

The book acts as a companion to the Irish pavilion at the 2014 Venice Biennale for Architecture. This chapter examines the context of roads transport and then analyses how its architectural infrastructure developed in this period, concentrating on the work carried out mainly by one Irish firm: Michael Scott and Partners.

Waste Management and Sustainability during the Design Phase of a Construction Project: A Qualitative Review

Waste management and sustainability are two core underlying philosophies that the construction sector must acknowledge and implement; however, this can prove difficult and time consuming. To this end, the aim of this paper is to examine waste management strategies and the possible benefits, advantages and disadvantages to their introduction and use, while also to examine any inter-relationship with sustainability, particularly at the design stage. The purpose of this paper is to gather, examine and review published works and investigate factors which influence economic decisions at the design phase of a construction project. In addressing this aim, a three tiered sequential research approach is adopted; in-depth literature review, interviews/focus groups and qualitative analysis. The resulting data is analyzed, discussed, with potential conclusions identified; paying particular attention to implications for practice within architectural firms. This research is of importance, particularly to the architectural sector, as it can add to the industry’s understanding of the design process, while also considering the application and integration of waste management into the design procedure. Results indicate that the researched topic had many advantages but also had inherent disadvantages. It was found that the potential advantages outweighed disadvantages, but uptake within industry was still slow and that better promotion and their benefits to; sustainability, the environment, society and the industry were required.

TRAME - Strand Lamps

Strand Lamps were included Trame – Copper Crossing in contemporary art, design, technology and architecture at la Triennale di Milano - Curated by Antonella Soldaini and Elena Tettamanti

Infrastructure and the Architectures of Modernity in Ireland 1916-2016

At the formation of the new Republic of Ireland, the construction of new infrastructures was seen as an essential element in the building of the new nation, just as the adoption of international style modernism in architecture was perceived as a way to escape the colonial past. Accordingly, infrastructure became the physical manifestation, the concrete identity of these objectives and architecture formed an integral part of this narrative. Moving between scales and from artefact to context, Infrastructure and the Architectures of Modernity in Ireland 1916-2016 provides critical insights and narratives on what is a complex and hitherto overlooked landscape, one which is often as much international as it is Irish. In doing so, it explores the interaction between the universalising and globalising tendencies of modernisation on one hand and the textures of local architectures on the other.

The book shows how the nature of technology and infrastructure is inherently cosmopolitan. Beginning with the building of the heroic Shannon hydro-electric facility at Ardnacrusha by the German firm of Siemens-Schuckert in the first decade of independence, Ireland became a point of varying types of intersection between imported international expertise and local need. Meanwhile, at the other end of the century, by the year 2000, Ireland had become one of the most globalized countries in the world, site of the European headquarters of multinationals such as Google and Microsoft. Climatically and economically expedient to the storing and harvesting of data, Ireland has subsequently become a repository of digital information farmed in large, single-storey sheds absorbed into anonymous suburbs. In 2013, it became the preferred site for Intel to design and develop its new microprocessor chip: the Galileo. The story of the decades in between, of shifts made manifest in architecture and infrastructure from the policies of economic protectionism, to the opening up of the country to direct foreign investment and the embracing of the EU, is one of the influx of technologies and cultural references into a small country on the edges of Europe as Ireland became both a launch-pad and testing ground for a series of aspects of designed modernity.

Parker Morris and the economies of the Fordist house

The Parker Morris report of 1961 attempted, through the application of scientific principles, to define the minimum living space standards needed to accommodate household activities. But while early modernist research into ideas of existenzminimum were the work of avant-garde architects and thinkers, this report was commissioned by the British State. This normalization of scientific enquiry into space can be considered not only a response to new conditions in the mass production of housing – economies of scale, prefabrication, system-building and modular coordination – but also to the post-war boom in consumer goods. The domestic interior was assigned a key role as a privileged site of mass consumption as the production and micro-management of space in Britain became integral to the development of a planned national economy underpinned by Fordist principles. The apparently placeless and scale-less diagrams executed by Gordon Cullen to illustrate Parker Morris emblematize these relationships. Walls dissolve as space flows from inside to outside in a homogenized and ephemeral landscape whose limits are perhaps only the boundaries of the nation state and the circuits of capital.

Moving with Beats and Loops: The Structure of Auditory Events and Sensorimotor Timing

Traditionally, audio-motor timing processes have been understood as motor output from an internal clock, the speed of which is set by heard sound pulses. In contrast, this paper proposes a more ecologically-grounded approach, arguing that audio-motor processes are better characterized as performed actions on the perceived structure of auditory events. This position is explored in the context of auditory sensorimotor synchronization and continuation timing. Empirical research shows that the structure of sounds as auditory events can lead to marked differences in movement timing performance. The nature of these effects is discussed in the context of perceived action-relevance of auditory event structure. It is proposed that different forms of sound invite or support different patterns of sensorimotor timing. Hence, the temporal information in looped auditory signals is more than just the interval durations between onsets: all metronomes are not created equal. The potential implications for auditory guides in motor performance enhancement are also described.