Characterisation of polyethylene powders for rotational moulding and effect of powder size and shape on densification behaviour

The particle size, shape and distribution of a range of rotational moulding polyethylenes (PEs) ground to powder was investigated using a novel visual data acquisition and analysis system (TP Picture®), developed by Total Petrochemicals. Differences in the individual particle shape factors of the powder samples were observed and correlations with the grinding conditions were determined. When heated, the bubble dissolution behaviour of the same powders was investigated and the shape factor correlated with densification rate, bubble size and bubble distribution.

Money, (Co)Production and Power in Digital

This article discusses the contribution of critical political economy approaches to digital journalism studies and argues that these offer important correctives to celebratory perspectives. The first part offers a review and critique of influential claims arising from self-styled new studies of convergence culture, media and creative industries. The second part discusses the contribution of critical political economy in examining digital journalism and responding to celebrant claims. The final part reflects on problems of restrictive normativity and other limitations within media political economy perspectives and considers ways in which challenges might be addressed by more synthesising approaches. The paper proposes developing radical pluralist, media systems and comparative analysis, and advocates drawing on strengths in both political economy and culturalist traditions to map and evaluate practices across all sectors of digital journalism.

Size matters : the link between staff size and perceived organizational support in early childhood education

Territorialisation and power in Portuguese America. The creation of comarcas (16th-18th centuries)

The general aim of this article is to analyse the political organisation of the territory in Portuguese America from the start of the building up of the Crown judiciary system from in the 16th to the 18th centuries and to look into the causes of its belatedness in comparison to what happened in Spanish America. The focus will however be on the comarcas through the reconstitution of the process leading to the setting up of these judiciary divisions. Four stages of this process will be identified and discussion will ensue over the social and political contexts in which these political and administrative novelties came to happen. It is claimed that the delay in the structuring of the judicial network in the States of Brazil and Maranhão stems from the fact that the Portuguese advance into the territories took place at a later stage. The comparisons between the two systems will also bring other differences to the fore, not least the greater rigidity of the Spanish model in contrast to the more experimental character of the Portuguese one, and the resilience found to exist in the donatarial system. It is also worth to point out that given solutions were the result of the will of central power as much as of local initiative, and it is suggested that the building up of the crown’s political apparatus (in which the judiciary network is included) brought about the connivance,albeit ephemeral, of social interests which are considered contradictory or irreconcilable by some authors.

Collimation of deuterium / 3-helium fusion products for advanced spacecraft propulsion and power

Current space exploration has transpired through the use of chemical rockets, and they have served us well, but they have their limitations. Exploration of the outer solar system, Jupiter and beyond will most likely require a new generation of propulsion system. One potential technology class to provide spacecraft propulsion and power systems involve thermonuclear fusion plasma systems. In this class it is well accepted that d-He3 fusion is the most promising of the fuel candidates for spacecraft applications as the 14.7 MeV protons carry up to 80% of the total fusion power while ‘s have energies less than 4 MeV. The other minor fusion products from secondary d-d reactions consisting of 3He, n, p, and 3H also have energies less than 4 MeV. Furthermore there are two main fusion subsets namely, Magnetic Confinement Fusion devices and Inertial Electrostatic Confinement (or IEC) Fusion devices. Magnetic Confinement Fusion devices are characterized by complex geometries and prohibitive structural mass compromising spacecraft use at this stage of exploration. While generating energy from a lightweight and reliable fusion source is important, another critical issue is harnessing this energy into usable power and/or propulsion. IEC fusion is a method of fusion plasma confinement that uses a series of biased electrodes that accelerate a uniform spherical beam of ions into a hollow cathode typically comprised of a gridded structure with high transparency. The inertia of the imploding ion beam compresses the ions at the center of the cathode increasing the density to the point where fusion occurs. Since the velocity distributions of fusion particles in an IEC are essentially isotropic and carry no net momentum, a means of redirecting the velocity of the particles is necessary to efficiently extract energy and provide power or create thrust. There are classes of advanced fuel fusion reactions where direct-energy conversion based on electrostatically-biased collector plates is impossible due to potential limits, material structure limitations, and IEC geometry. Thermal conversion systems are also inefficient for this application. A method of converting the isotropic IEC into a collimated flow of fusion products solves these issues and allows direct energy conversion. An efficient traveling wave direct energy converter has been proposed and studied by Momota , Shu and further studied by evaluated with numerical simulations by Ishikawa and others. One of the conventional methods of collimating charged particles is to surround the particle source with an applied magnetic channel. Charged particles are trapped and move along the lines of flux. By introducing expanding lines of force gradually along the magnetic channel, the velocity component perpendicular to the lines of force is transferred to the parallel one. However, efficient operation of the IEC requires a null magnetic field at the core of the device. In order to achieve this, Momota and Miley have proposed a pair of magnetic coils anti-parallel to the magnetic channel creating a null hexapole magnetic field region necessary for the IEC fusion core. Numerically, collimation of 300 eV electrons without a stabilization coil was demonstrated to approach 95% at a profile corresponding to Vsolenoid = 20.0V, Ifloating = 2.78A, Isolenoid = 4.05A while collimation of electrons with stabilization coil present was demonstrated to reach 69% at a profile corresponding to Vsolenoid = 7.0V, Istab = 1.1A, Ifloating = 1.1A, Isolenoid = 1.45A. Experimentally, collimation of electrons with stabilization coil present was demonstrated experimentally to be 35% at 100 eV and reach a peak of 39.6% at 50eV with a profile corresponding to Vsolenoid = 7.0V, Istab = 1.1A, Ifloating = 1.1A, Isolenoid = 1.45A and collimation of 300 eV electrons without a stabilization coil was demonstrated to approach 49% at a profile corresponding to Vsolenoid = 20.0V, Ifloating = 2.78A, Isolenoid = 4.05A 6.4% of the 300eV electrons’ initial velocity is directed to the collector plates. The remaining electrons are trapped by the collimator’s magnetic field. These particles oscillate around the null field region several hundred times and eventually escape to the collector plates. At a solenoid voltage profile of 7 Volts, 100 eV electrons are collimated with wall and perpendicular component losses of 31%. Increasing the electron energy beyond 100 eV increases the wall losses by 25% at 300 eV. Ultimately it was determined that a field strength deriving from 9.5 MAT/m would be required to collimate 14.7 MeV fusion protons from d-3He fueled IEC fusion core. The concept of the proton collimator has been proven to be effective to transform an isotropic source into a collimated flow of particles ripe for direct energy conversion.

The millennium; or, The coming of Christ to reign, in the spirit and power of his gospel.

Mode of access: Internet.

CONTROL OF SIZE AND MAGNETIC PROPERTIES OF CARBOXYL-FUNCTIONALIZED MAGNETITE PARTICLES: SYNTHESIS PROCEDURES, CHARACTERIZATIONS, AND APPLICATIONS

Magnetic nanoparticles (MNPs) are known for the unique properties conferred by their small size and have found wide application in food safety analyses. However, their high surface energy and strong magnetization often lead to aggregation, compromising their functions. In this study, iron oxide magnetic particles (MPs) over the range of nano to micro size were synthesized, from which particles with less aggregation and excellent magnetic properties were obtained. MPs were synthesized via three different hydrothermal procedures, using poly (acrylic acid) (PAA) of different molecular weight (Mw) as the stabilizer. The particle size, morphology, and magnetic properties of the MPs from these synthesis procedures were characterized and compared. Among the three syntheses, one-step hydrothermal synthesis demonstrated the highest yield and most efficient magnetic collection of the resulting PAA-coated magnetic microparticles (PAA-MMPs, >100 nm). Iron oxide content of these PAA-MMPs was around 90%, and the saturation magnetization ranged from 70.3 emu/g to 57.0 emu/g, depending on the Mw of PAA used. In this approach, the particles prepared using PAA with Mw of 100K g/mol exhibited super-paramagnetic behavior with ~65% lower coercivity and remanence compared to others. They were therefore less susceptible to aggregation and remained remarkably water-dispersible even after one-month storage. Three applications involving PAA-MMPs from one-step hydrothermal synthesis were explored: food proteins and enzymes immobilization, antibody conjugation for pathogen capture, and magnetic hydrogel film fabrication. These studies demonstrated their versatile functions as well as their potential applications in the food science area.

Exact solutions for cluster-growth kinetics with evolving size and shape profiles

In this paper we construct a model for the simultaneous compaction by which clusters are restructured, and growth of clusters by pairwise coagulation. The model has the form of a multicomponent aggregation problem in which the components are cluster mass and cluster diameter. Following suitable approximations, exact explicit solutions are derived which may be useful for the verification of simulations of such systems. Numerical simulations are presented to illustrate typical behaviour and to show the accuracy of approximations made in deriving the model. The solutions are then simplified using asymptotic techniques to show the relevant timescales of the kinetic processes and elucidate the shape of the cluster distribution functions at large times.

Representativeness, legitimacy and power in public involvement in health-care management

Public participation in health-service management is an increasingly prominent policy internationally. Frequently, though, academic studies have found it marginalized by health professionals who, keen to retain control over decision-making, undermine the legitimacy of involved members of the public, in particular by questioning their representativeness. This paper examines this negotiation of representative legitimacy between staff and involved users by drawing on a qualitative study of service-user involvement in pilot cancer-genetics services recently introduced in England, using interviews, participant observation and documentary analysis. In contrast to the findings of much of the literature, health professionals identified some degree of representative legitimacy in the contributions made by users. However, the ways in which staff and users constructed representativeness diverged significantly. Where staff valued the identities of users as biomedical and lay subjects, users themselves described the legitimacy of their contribution in more expansive terms of knowledge and citizenship. My analysis seeks to show how disputes over representativeness relate not just to a struggle for power according to contrasting group interests, but also to a substantive divergence in understanding of the nature of representativeness in the context of state-orchestrated efforts to increase public participation. This divergence might suggest problems with the enactment of such aspirations in practice; alternatively, however, contestation of representative legitimacy might be understood as reflecting ambiguities in policy-level objectives for participation, which secure implementation by accommodating the divergent constructions of those charged with putting initiatives into practice.

Granulocyte-colony stimulating factor in experimental stroke and its effects on infarct size and functional outcome: a systematic review

Background Granulocyte-colony stimulating factor (G-CSF) shows promise as a treatment for stroke. This systematic review assesses G-CSF in experimental ischaemic stroke. Methods Relevant studies were identified with searches of Medline, Embase and PubMed. Data were extracted on stroke lesion size, neurological outcome and quality, and analysed using Cochrane Review Manager using random effects models; results are expressed as standardised mean difference (SMD) and odds ratio (OR). Results Data were included from 19 publications incorporating 666 animals. G-CSF reduced lesion size significantly in transient (SMD -1.63, p<0.00001) but not permanent (SMD -1.56, p=0.11) focal models of ischaemia. Lesion size was reduced at all doses and with treatment commenced within 4 hours of transient ischaemia. Neurological deficit (SMD -1.37, p=0.0004) and limb placement (SMD -1.88, p=0.003) improved with G-CSF; however, locomotor activity (>4 weeks post ischaemia) was not (SMD 0.76, p=0.35). Death (OR 0.27, p<0.0001) was reduced with G-CSF. Median study quality was 4 (range 0-7/8); Egger’s test suggested significant publication bias (p=0.001). Conclusions G-CSF significantly reduced lesion size in transient but not permanent models of ischaemic stroke. Motor impairment and death were also reduced. Further studies assessing dose-response, administration time, length of ischaemia and long-term functional recovery are needed.

Sport and sex: rogue players, predatory women and power

Why do sportspeople feature regularly in reports of sexual shenenigans? Social scientists explain.

The correlation between supermarket size and national obesity prevalence

BACKGROUND: Supermarkets provide healthy and affordable food options while simultaneously heavily promoting energy-dense, nutrient-poor foods and drinks. Store size may impact body weight via multiple mechanisms. Large stores encourage purchasing of more food in a single visit, and in larger packages. In addition they provide greater product choice (usually at lower prices) and allow greater exposure to foods of all types. These characteristics may promote purchasing and consumption. Our objective was to assess the relationship between supermarket size and obesity, which has rarely been assessed. RESULTS: Data on supermarket size (measured as total aisle length in metres) was from 170 stores in eight developed countries with Western-style diets. Data for national obesity prevalence was obtained from the UK National Obesity Observatory. We found a strong correlation between average store size and national obesity prevalence (r = 0.96). CONCLUSIONS: Explanations for the association between store size and national obesity prevalence may include larger and less frequent shopping trips and greater choice and exposure to foods in countries with larger stores. Large supermarkets may represent a food system that focuses on quantity ahead of quality and therefore may be an important and novel environmental indicator of a pattern of behaviour that encourages obesity.

Effects of combined silicon and molybdenum alloying on the size and evolution of microalloy precipitates in HSLA steels containing niobium and titanium

The effects of combined silicon and molybdenum alloying additions on microalloy precipitate formation in austenite after single- and double-step deformations below the austenite no-recrystallization temperature were examined in high-strength low-alloy (HSLA) steels microalloyed with titanium and niobium. The precipitation sequence in austenite was evaluated following an interrupted thermomechanical processing simulation using transmission electron microscopy. Large (~ 105 nm), cuboidal titanium-rich nitride precipitates showed no evolution in size during reheating and simulated thermomechanical processing. The average size and size distribution of these precipitates were also not affected by the combined silicon and molybdenum additions or by deformation. Relatively fine (< 20 nm), irregular-shaped niobium-rich carbonitride precipitates formed in austenite during isothermal holding at 1173 K. Based upon analysis that incorporated precipitate growth and coarsening models, the combined silicon and molybdenum additions were considered to increase the diffusivity of niobium in austenite by over 30% and result in coarser precipitates at 1173 K compared to the lower alloyed steel. Deformation decreased the size of the niobium-rich carbonitride precipitates that formed in austenite.