Coverage mobilization by different no-tillage in-line handling mechanisms

Vegetation cover on soil acts positively in maintaining temperature and soil moisture, yet, it has been imposing specific operational conditions on seeders. The objective of this study was to evaluate performance of different mechanisms regarding straw mobilization, employed in a no-till seeder. The experimental area was conducted on clayey soil under no-tillage with a large quantity of sorghum residue. The experiment was established in a randomized block design, as the treatments consisted of a combination of two mechanisms at front of the furrow opener composed of cutting disc and row cleaners, and three mechanisms behind the seed furrower, covering discs prototype model M1, Spider and commercial model, with the combination of cutting disc and Spider model not being evaluated. We assessed the coverage permanence on soil index, vegetation mass on surface and inside the line. The treatment containing the row cleaner mechanism efficiently removed straw from the surface of sowing line as well as the return one acted on straw replacement. It was identified that use of the cutting disc at the front of seeder contributed to the increase of straw installation inside the line, three times more than in the row cleaner system when operating individually. Covering mechanism with row cleaners reduced straw inside the line and kept line covering similar to treatment of cutting disc operating alone.

Energy balance in the poultry-shed system and its influence on broiler performance

ABSTRACTThe objective of this study was to determine the energy balance of the poultry-shed system and its effect on broiler performance during the production cycle. The experimental design was completely random with sub-divided blocks. The blocks were composed of five different types of sheds and the sub-blocks of the evaluation times (00:00 h to 23:00 h), allowing an analysis of variance and a comparison between means with the Tukey test. There were no significant differences between the mean values of the exchanges of sensible, latent and total heat between the poultry sheds but the differences for the evaluation times were significant (P<0.05). There was no significant difference between sheds 1 and 4 for broiler productive performance regarding weight gain, feed consumption and feed conversion. Bird performance was significant (P<0.05) for the remaining poultry sheds. The productive indexes remained below the ranges considered ideal for broilers and values in the final weeks were characterized by the poor installation efficiency in controlling temperature variations and, consequently, the energy balance in the system, which adversely affected bird productive performance.

Performance of small wind turbines: simulation of electricity supply to loads connected to the public or isolated grid

ABSTRACT The successful in the implementation of wind turbines depends on several factors, including: the wind resource at the installation site, the equipment used, project acquisition and operational costs. In this paper, the production of electricity from two small wind turbines was compared through simulation using the computer software HOMER - a national model of 6kW and an imported one of 5kW. The wind resources in three different cities were considered: Campinas (SP/BR), Cubatão (São Paulo/BR) and Roscoe (Texas/ USA). A wind power system connected to the grid and a wind isolated system - batteries were evaluated. The results showed that the energy cost ($/kWh) is strongly dependent on the windmill characteristics and local wind resource. Regarding the isolated wind system – batteries, the full supply guarantee to the simulated electrical load is only achieved with a battery bank with many units and high number of wind turbines, due to the intermittency of wind power.

Laskentasovelluksen kehittäminen modulaariselle vesiputkikattilalle

Modulaarisella vesiputkikattilalla tarkoitetaan täysin konepajalla valmistettavissa olevaa kattilaa, joka voidaan kuljettaa yhtenä tai muutamana suurena moduulina työmaalle. Tässä diplomityössä käsiteltiin modulaarisen vesiputkikattilan laskentasovelluksen ke-hittämistä KPA Unicon Oy:lle. Työn tavoitteena oli tarkastella modulaarisen vesiputkikattilan lämpöteknistä mitoitusta ja suunnittelua sekä kehittää laskentasovellus, jonka avulla voidaan arvioida kattilan mittoja ja painoa. Laskentasovellus laadittiin Microsoftin Excel-alustalle, josta se on myöhemmin mahdollista siirtää muille ohjelma-alustoille. Laskentasovelluksessa hyödynnetään lämmönsiirron ja virtaustekniikan laskentayhtälöitä sekä -menetelmiä. Sovellukseen valitut laskentayhtälöt sekä -menetelmät ovat yleisesti hyväksyttyjä ja käytännössä testattuja. Diplomityön tuloksena valmistui laskentasovellus, joka kykenee modulaarisen vesiputkikattilan lämpötekniseen mitoittamiseen. Sovelluksen avulla voidaan mitoittaa kattilan tulipesä, tulistimet, höyrystinpinnat sekä ekonomaiseri. Laskentasovellusta on tarkoitus hyödyntää yrityksen tarjousvaiheen projekteissa sekä mahdollisesti kattiloiden esisuunnittelussa. Laskentasovelluksen laatimista varten ei ollut mahdollista hyödyntää toiminnassa olevien kattiloiden prosessitietoja, koska ensimmäiset tämän tyyppiset kattilat ovat asenteilla. Sen sijaan sovelluksen antamia laskentatuloksia verrattiin toisen mitoitusohjelman antamiin tuloksiin, joiden perusteella laskentasovelluksen voidaan olettaa antavan oikeita tuloksia.

Automatisointiin ja monistettavuuteen perustuvan palvelumallin soveltaminen tietojärjestelmätoimituksissa

Ohjelmistotuotannon yleinen ongelma on se, että toimitusprojektien läpivientiajat pitkittyvät. Kilpailun kiristyessä ohjelmistoalalla on alettu kiinnittää erityistä huomiota projektien eri vaiheiden tehostamiseen. Process Vision Oy kehittää energiatietojärjestelmiä Suomen energia-alan yrityksille. Yrityksessä on kehitetty vuonna 2010 palvelumalli, jonka avulla pyritään nopeuttamaan toimitusprojektien eri vaiheita. Valtioneuvosto valmisteli vuonna 2009 tuntimittausasetuksen, joka määritti sääntöjä mittaustiedon hallintaan energia-alalla. Kyseisen asetuksen pohjalta Energiateollisuus julkaisi vuonna 2010 ohjeistuksen, joka selkeyttää asetuksen sisällön vaatimuksia jakeluverkonhaltijoille ja sähkön myyjille. Process Vision Oy on valmistellut ohjeistuksen pohjalta tuntimittauspaketin, joka sisältää ohjeistuksen mukaiset toiminnot GENERIS-järjestelmässä. Tässä diplomityössä määritellään Process Vision Oy:n palvelumallin mukaiset standardikomponentit tuntimittauspaketin toimitusprojekteja varten. Työn tavoitteena on kehittää mahdollisimman pitkälle tuotteistettu tuntimittauspaketin toimitus uusille ja vanhoille asiakkaille. Työn lopussa pohditaan miten hyvin palvelumalli soveltuu tuntimittauspaketin toimitusprojekteihin. Lisäksi työssä kartoitetaan yrityksessä käytössä olevien automatisointityökalujen kehitystarpeita. Työn tuloksena saatiin määriteltyä GENERIS-objektit ja konfiguraatiot, jotka toimitetaan tuntimittauspaketin mukana. Työn ohessa sisällytettiin yrityksen Suomen taseselvitysjärjestelmien asennusohjeeseen tuntimittauspaketin toiminnallisuuksien konfigurointi. Uusien vientimäärittelyjen avulla voidaan tuntimittauspaketin toiminnallisuudet toimittaa jatkossa tehokkaammin kuin aiemmin.

Chelyabinsk CHP-3 “locked power” problem solving

All over the world power systems become bigger and bigger every day. New equipment is installed, new feeders are constructed, new power units are installed. Some old elements of the network, however, are not changed in time. As a result, “bottlenecks” for capacity transmission can occur. By locked power problem the situation when a power plant has installed capacity exceeding the power it can actually deliver is usually meant. Regime, scheme or even technical restrictions-related issues usually cause this kind of problem. It is really important, since from the regime point of view it is typical decision to have a mobile capacity reserve, in case of malfunctions. And, what can be even more significant, power plant owner (JSC Fortum in our case) losses his money because of selling less electrical energy. The goal of master`s thesis is to analyze the current state of Chelyabinsk power system and the CHP-3 (Combined Heat and Power plant) in particular in relation with it`s ability to deliver the whole capacity of the CHP in it`s existing state and also taking into consideration the prospect of power unit 3 installation by the fourth quarter of 2010. The thesis contains some general information about the UPS of Russia, CPS of Ural, power system of Chelyabinsk and the Chelyabinsk region itself. Then the CHP-3 is described from technical point of view with it`s equipment observation. Regimes for the nowadays power system and for the system after the power unit 3 installation are reviewed. The problems occurring are described and, finally, a solution is offered.

Surgical techniques for maxillary bone grafting - literature review

For oral rehabilitation with implant-supported prostheses, there are required procedures to create the bone volume needed for installation of the implants. Thus, bone grafts from intraoral or extraoral donor sites represent a very favorable opportunity. This study aimed to review the literature on the subject, seeking to discuss parameters for the indications, advantages and complications of techniques for autogenous bone grafts.

Sähkön tuotantokustannusvertailu

Työssä vertaillaan eri sähköntuotantovaihtoehtojen taloudellista kannattavuutta. Kannattavuusvertailu suoritetaan pelkkää sähköä tuottaville voimalaitoksille. Raportti on jatkoa aikaisemmille tutkimuksille, joista viimeisin julkaistiin 2008. Tutkittavat voimalaitostyypit ovat: ydinvoimalaitos, maakaasukombilauhdevoimalaitos, kivihiililauhdevoimalaitos, turvelauhdevoimalaitos, puulauhdevoimalaitos, tuulivoimala ja uutena aurinkovoimala. Kannattavuustarkastelu suoritetaan annuiteettimenetelmällä käyttäen 5 % reaalikorkoa ja maaliskuun 2012 hintatasoa. Laskelmien perusteella 8000 tunnin huipunkäyttöajalla ydinsähkön tuotantokustannus, kun laitos rakennetaan olemassaolevalle tontille olisi 43,7 €/MWh, täysin uuden ydinvoimalaitoksen 57,9 €/MWh, kaasusähkön 75,4 €/MWh, turvelauhteen 75,4 €/MWh ja hiilisähkön hiilidioksidin talteenotolla 64,4 €/MWh, kun hiilidioksidipäästöoikeuden hintana käytetään 23 €/t. Vastaavasti uusiutuvista puupolttoainelauhdesähkön tuotantokustannus olisi 70,2 €/MWh kun taas 2200 tunnin huipunkäyttöajalla maalla sijaitsevan tuulivoimalaitoksen sähkön tuotantokustannus 52,7 €/MWh ja merellä sijaitsevan tuulivoimalaitoksen 76,8 €/MWh. Erillistarkastelussa arvioitiin suurien keskittävää teknologiaa käyttävän aurinko-voimalaitoksen tuotantokustannuksen ylittävän 100 €/MWh ollen todennäköisesti lähempänä 150 €/MWh. Arvio piensähkön tuotantokustannuksista aurinkosähköisillä paneeleilla vaihtelee 90 – 130 €/MWh. Merkittävin kustannussäästö syntyy, jos aurinkosähköpaketteja voidaan tarjota kuluttajalle kokonaistoimituksena avaimet käteen. Aurinkosähkön tuottaminen kotikeräimillä näyttääkin olevan vaiheessa, jossa se on selkeästi pienkäyttäjälle edullista mikäli sijoitettava pääoma 6000 – 18000 € ei vaadi ulkopuolista rahoitusta.

Utilization of Particle Image velocimetry in PPOOLEX condensation experiments

Particle Image Velocimetry, PIV, is an optical measuring technique to obtain velocity information of a flow in interest. With PIV it is possible to achieve two or three dimensional velocity vector fields from a measurement area instead of a single point in a flow. Measured flow can be either in liquid or in gas form. PIV is nowadays widely applied to flow field studies. The need for PIV is to obtain validation data for Computational Fluid Dynamics calculation programs that has been used to model blow down experiments in PPOOLEX test facility in the Lappeenranta University of Technology. In this thesis PIV and its theoretical background are presented. All the subsystems that can be considered to be part of a PIV system are presented as well with detail. Emphasis is also put to the mathematics behind the image evaluation. The work also included selection and successful testing of a PIV system, as well as the planning of the installation to the PPOOLEX facility. Already in the preliminary testing PIV was found to be good addition to the measuring equipment for Nuclear Safety Research Unit of LUT. The installation to PPOOLEX facility was successful even though there were many restrictions considering it. All parts of the PIV system worked and they were found out to be appropriate for the planned use. Results and observations presented in this thesis are a good background to further PIV use.

Kasanpurkaimen portaalin teknistaloudellinen tarkastelu

Tämä diplomityö on tehty kansainväliseen materiaalinkäsittelyjärjestelmiä toimittavaan yritykseen. Menestyvän yrityksen on pyrittävä kustannustehokkuuden jatkuvaan parantamiseen. Tässä diplomityössä on tutkittu kannattaako kasanpurkaimen portaali valmistaa ristikkorakenteena levyrakenteeseen verrattuna. Tutkimukseen on sisällytetty koko toimitusketju suunnittelusta asennukseen, mutta lujuuslaskennan on suorittanut ulkopuolinen alihankkija. Yrityksen projektissa toimitettiin samaan aikaan purkainta, jonka portaali valmistettiin levyrakenteena. Tätä portaalia on käytetty uuden ristikkorakenteisen portaalin vertailukohtana. Ristikkorakenteinen portaali on suunniteltu putkipalkkirakenteena, jolloin siitä saatiin kevyempi. Suunnittelussa on pyritty huomioimaan valmistusystävällisen suunnittelun näkökohtia, joita esitellään työn teoriaosassa. Ristikkorakenteesta on tehty myös tarjouskuvat, joiden pohjalta valmistustarjoukset on pyydetty. Valmistuskustannusten lisäksi tarkemmassa tarkastelussa ovat suunnittelu- ja laskentakustannukset.

Comparison of two methods for glucocorticoid evaluation in maned wolves

Analysis of faecal glucocorticoid metabolites provides a powerful noninvasive tool for monitoring adrenocortical activity in wild animals. However, differences regarding the metabolism and excretion of these substances make a validation for each species and sex investigated obligatory. Although maned wolves (Chrysocyon brachyurus) are the biggest canids in South America, their behaviour and physiology are poorly known and they are at risk in the wild. Two methods for measuring glucocorticoid metabolites in maned wolves were validated: a radio- and an enzyme immunoassay. An ACTH challenge was used to demonstrate that changes in adrenal function are reflected in faecal glucocorticoid metabolites. Our results suggest that both methods enable a reliable assessment of stress hormones in maned wolves avoiding short-term rises in glucocorticoid concentrations due to handling and restraint. These methods can be used as a valuable tool in studies of stress and conservation in this wild species.

Ultrasound call detection in capybara

The vocal repertoire of some animal species has been considered a non-invasive tool to predict distress reactivity. In rats ultrasound emissions were reported as distress indicator. Capybaras[ vocal repertoire was reported recently and seems to have ultrasound calls, but this has not yet been confirmed. Thus, in order to check if a poor state of welfare was linked to ultrasound calls in the capybara vocal repertoire, the aim of this study was to track the presence of ultrasound emissions in 11 animals under three conditions: 1) unrestrained; 2) intermediately restrained, and 3) highly restrained. The ultrasound track identified frequencies in the range of 31.8±3.5 kHz in adults and 33.2±8.5 kHz in juveniles. These ultrasound frequencies occurred only when animals were highly restrained, physically restrained or injured during handling. We concluded that these calls with ultrasound components are related to pain and restraint because they did not occur when animals were free of restraint. Thus we suggest that this vocalization may be used as an additional tool to assess capybaras[ welfare.

Individual dietary counselling during and after pregnancy: Impact on diet and body weight

In Finland, maternity and child health clinics play a key role in promoting health in young families. Currently, obesity causes the greatest challenges to clinics. In obese pregnant women, an increased risk for metabolic diseases exist which can affect both the mother and child. The purpose of this thesis was to explore the role of dietary counselling: in Finnish health clinics; in the regulation of dietary intake; and in affecting the body weight of women. The main aim was to test the effect of dietary counselling and probiotic intervention on dietary intake and maternal body weight during and after pregnancy. In addition to dietary counselling, the effect of other factors, such as eating behaviour on dietary intake and body weight control after pregnancy was assessed. Another aim was also to evaluate dietary counselling practices by nurses (n = 327) in Finnish health clinics assessed by a questionnaire. At the beginning of the pregnancy, women (n = 256) enrolled in a dietary intervention study, were randomised into three groups. One group received dietary counselling with probiotics, one had counselling with placebo and the third group was the control group. The control group consisted of women whom did not receive counselling and took placebo. Probiotics and placebo supplements were used until the end of exclusive breastfeeding or six months after pregnancy. Women were followed from early pregnancy up to four years after pregnancy. Follow-up visits took place three times during pregnancy, at one and six months, and one, two and four years after pregnancy. Dietary counselling, provided by a nutritionist, aimed to influence the quality of dietary fat intake. Dietary counselling is important to provide in clinics, as determined by the nurses, and these nurses expressed a want to improve their own nutritional knowledge through education. The nurses had varying knowledge of current dietary recommendations. Dietary counselling for women during and after pregnancy resulted in beneficial changes in dietary intake up to one year after pregnancy and body weight and waist circumference up to four years after pregnancy. Probiotics had a beneficial effect together with dietary counselling on waist circumference until one year after pregnancy, but not throughout the long term, four years after pregnancy. Other factors, such as eating behaviour, associated with dietary intake and body weight control after pregnancy. Specifically, dietary recommendations are reached amongst women whom had high cognitive restraint in their eating behaviour and did not demonstrate uncontrolled eating. Overweight women more frequently emotionally ate compared to normal weight women and women with central adiposity related more frequently to having an uncontrolled eating behaviour than women with normal waist circumference. In addition, being overweight prior to pregnancy and excessive weight gain during pregnancy associated with increased body weight retention after pregnancy. This study showed that individual dietary counselling is useful in influencing dietary intake which adheres to dietary recommendations and this counselling influences, favourably, body weight after pregnancy. Especially, women with the risk for weight retention, such as women who have emotional and uncontrolled eating behaviours, who were overweight prior to pregnancy or those who had excessive weight gain during pregnancy, may benefit from individual dietary counselling. This study underscores the need to develop dietary counselling practices for pregnant women and their follow-up after pregnancy in Finnish health clinics. These practices include increasing the efficacy of the counselling such as collaboration with families, having knowledgable health professionals and having sufficient resources.

Reducing bumblefoot lesions in a group of captive Magellanic penguins (Spheniscus magellanicus) with the use of environmental enrichment

Captive penguins are prone to pododermatitis (bumblefoot) lesions due to sedentary habits, changes in normal activity patterns, prolonged time on hard and abrasive surfaces, and less time swimming in the water. Environmental enrichment allows the use of creative and ingenious techniques that aim to keep the captive animals occupied by increasing the range and the diversity of behavioral opportunities always respecting the ethological needs of the species. The main goal of this work was to use environmental enrichment techniques to reduce pododermatitis in a group of captive penguins. Five captive Magellanic penguins (Spheniscus magellanicus) that were showing bumblefoot lesions were followed during this project. To monitor the lesions, all animals were physically restraint 3 times a week over a period of 12 weeks. Environmental enrichment was introduced daily in the water with the goal of enhancing their time in the water for one extra hour daily. The results demonstrate that in a twelve weeks period, four animals showed significant reduction of the lesions in both feet and in two animals the lesions were completely healed. With these results we can conclude that aquatic environmental enrichment allowed this group of penguins to spend more time in the water, favoring the reduction of the bumblefoot lesions.

Value Proposition Enhancement in Retailers of the HVAC Industry

This case study explored value proposition and relationship marketing de-terminants in the HVAC (Heating, Ventilation and Air Conditioning) indus-try. Concretely, the case involved Purmo, a prominent brand and market leader radiator manufacturer, its relationship marketing practices with the retailers of their product (radiator installers) and the value proposition which is being used to reach the end-user. In the field work, five heating experts/entrepreneurs in the installation business were interviewed and asked about their opinion on Purmo and the end-user’s needs. The findings suggest that while installers appreciate Purmo as a supplier and respect it as a company, the loyalty that they have towards it has no repercussions on their product advocacy to ultimate consumers. Installers proved to be attracted to standard model radiators and to be apathetic to the benefits that more advanced models can provide. The reasons for this behavior were found to be their preference for products with better availa-bility and their reluctance to interfere with the customers’ decision making processes.